Texas Instruments

DS90CF383AMTDX - 3.3V 24-Bit FPD-Link LVDS Transceiver

N.º de pieza: DS90CF383AMTDX ✓ Activo
3 V to 3.6 V Vdss 56-TSSOP (TFSOP), 0.240 inch body width, 6.10 mm Package 65 MHz Speed
MOQ: 1 |

DS90CF383AMTDX Descripción general

The Texas Instruments DS90CF383AMTDX is a 3.3 V, 24-bit flat panel display FPD-Link and LVDS transceiver operating up to 65 MHz in a 56-TSSOP package. It converts 28-bit parallel CMOS/TTL data into four differential LVDS data streams and transfers a fifth differential clock link. The device also provides four LVDS data receivers for communication in the opposite direction, creating a bidirectional parallel-to-serial and serial-to-parallel interface in one component.

An FPD-Link transceiver is a display-interface IC that carries high-speed digital video and control traffic between a graphics or video source and a flat-panel display. In the signal chain, this device sits between parallel logic and a low-voltage differential display link. LVDS uses small-amplitude differential signaling to reduce common-mode noise, provide good electromagnetic-immunity behavior, and support reliable point-to-point cable or PCB connections at high data rates.

The DS90CF383AMTDX supports a 3 V to 3.6 V supply range and a 65 MHz operating clock, giving the parallel interface a theoretical aggregate payload rate of 1.56 Gbit/s across the four transmitted data lanes. Its 28/4 architecture accommodates 24 bits of pixel or control data together with the associated clock, control, and enable functions. The 56-TSSOP surface-mount package also includes an exposed-thermal-pad option in the family, supporting improved heat transfer on multilayer PCB designs.

Typical uses include small-format LCD panels, industrial HMIs, medical display controllers, automotive navigation displays, and video-processing boards that connect an LVDS display port to a parallel CMOS source. The same bidirectional interface can also be considered for point-to-point LVDS links when a compatible receiving system recognizes the device's transmission format and clocking scheme.

PCB implementation requires careful treatment of the high-speed differential nets. Route each LVDS pair as a tightly coupled, length-matched pair, provide a continuous reference plane, and avoid placing test pads or unrelated traces in the differential escape region. Keep the logic supply and the LVDS connector ground return tied through a low-impedance plane rather than relying on narrow neck-down paths.

This product page brings together the device function, verified ordering information, drop-in alternatives, and application-specific engineering guidance so engineers can evaluate the DS90CF383AMTDX before integrating it into an LVDS display interface.

Alternativas directas para DS90CF383AMTDX — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

DS90CF383AMTD

✅ Sustitución directa
Texas Instruments
📦 56-TSSOP
Programmable LVDS flat-panel-display transmitter · 3 V to 3.6 V · 65 MHz maximum · 28 bits · 24 bits · 4 differential outputs · 1 differential output · 28 drivers and 4 receivers

Consulte el precio

Ver hoja de datos →

DS90CF383AMT

✅ Sustitución directa
📦 56-TSSOP
Same 28/4 FPD-Link function with unchanged 3.3 V supply and 65 MHz clock rating; ordering code differs

📋 Alternativa de referencia (no en el catálogo)

DS90C383BMTX/NOPB

✅ Sustitución directa
📦 56-TSSOP
Closely related 28/4 LVDS transmitter family; 65 MHz clock rating is retained while device-specific timing and control details require verification

📋 Alternativa de referencia (no en el catálogo)

DS90CF383AMTDX Especificaciones

Product Type 28/4 FPD-Link and LVDS Transceiver
Tensión de alimentación 3 V to 3.6 V
Nominal Supply Voltage 3.3 V
Tipo de interfaz LVDS / FPD-Link
Parallel Data Width 24 bit
LVDS Data Outputs 4 differential outputs
LVDS Data Inputs 4 differential inputs
Frecuencia de reloj máxima 65 MHz
Transceiver Configuration 28/4
Protocol FPD-Link
Encapsulado 56-TSSOP (TFSOP), 0.240 inch body width, 6.10 mm
Tipo de montaje Surface Mount
Manufacturer Texas Instruments / National Semiconductor

Guía de configuración de pines de DS90CF383AMTDX 56-tssop (tfsop), 0.240 inch body width, 6.10 mm

Configuración de pines para DS90CF383AMTDX (encapsulado 56-tssop (tfsop), 0.240 inch body width, 6.10 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 56-tssop (tfsop), 0.240 inch body width, 6.10 mm para DS90CF383AMTDX

No hay datos detallados de patillaje disponibles para DS90CF383AMTDX.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

DS90CF383AMTDX es adecuado para 6 aplicacións: Small-Format LCD Display Interface, Industrial Human-Machine Interface, Medical Display Controller Interface, Automotive Navigation Display Link, Point-to-Point LVDS Data Link, Video Processing and Scaling Boards.

📺

Small-Format LCD Display Interface

The DS90CF383AMTDX fits a parallel-to-LVDS display link in which a controller supplies 24 bits of pixel and control data at up to 65 MHz. Placing the transceiver between the CMOS/TTL source and an LVDS panel connector consolidates the four data lanes, forwarded clock, and reverse data path in one 56-TSSOP device. The 3 V to 3.6 V operating range is compatible with 3.3 V display-controller logic. Pair routing must preserve closely matched differential geometry and adequate return-current paths, while the panel's timing, input format, and clock requirement must be checked before layout release.

🏭

Industrial Human-Machine Interface

An industrial HMI can use the DS90CF383AMTDX to move display data over a compact differential interface instead of routing 24 parallel signal lines to a remote panel. The four LVDS transmit pairs support an aggregate payload of 1.56 Gbit/s at the 65 MHz maximum clock, while the receive pairs provide a return path for control traffic. This arrangement reduces connector pin count and can improve immunity to industrial noise. Validate industrial temperature requirements, isolation strategy, enclosure grounding, and panel timing because those conditions are not established by the basic device ratings.

💊

Medical Display Controller Interface

The DS90CF383AMTDX can bridge a medical display controller to an LVDS panel by accepting parallel CMOS/TTL data and transmitting it over four differential pairs with a forwarded clock. Differential signaling provides a practical foundation for reliable panel connections in equipment where cable routing and electromagnetic coupling are significant concerns. The 65 MHz operating limit supports higher pixel rates than many older display interfaces, while the integrated receive path can support control traffic. Medical designs must still verify radiation, immunity, operating-temperature, and qualification requirements separately because those standards are not assigned to this device by the manufacturer listing.

🚗

Automotive Navigation Display Link

The DS90CF383AMTDX is architecturally suited to a compact navigation-display link that carries video and control data from an entertainment or instrument controller to an LVDS panel. Its 24-bit parallel input, four differential outputs, and separate forwarded clock reduce the number of high-speed board traces, while the receive channels can carry commands back to the source. At 65 MHz, the transmitted data lanes carry an aggregate 1.56 Gbit/s. Automotive qualification, temperature range, transient immunity, and display timing must be confirmed for the exact ordering option before use in a vehicle.

🌐

Point-to-Point LVDS Data Link

The bidirectional capability of the DS90CF383AMTDX supports point-to-point links in addition to conventional display transfers. The transmitter serializes 28-bit parallel data onto four LVDS lanes, while four receive lanes accept differential data in the opposite direction; a fifth differential output forwards the transmitted clock. This arrangement can connect two processing boards when both endpoints use compatible data organization and clocking. Because the link is not a generic serial protocol, the endpoint firmware, framing, and clock relationships must be established before substituting this device for a standard LVDS serializer.

🖥️

Video Processing and Scaling Boards

A video processor or scaler with a parallel output can connect to an LVDS display through the DS90CF383AMTDX. The device separates the parallel logic domain from the low-amplitude differential link domain, reducing the number of long parallel traces that would otherwise need controlled-impedance routing across the board. At the 65 MHz maximum operating clock, the four data outputs provide a nominal aggregate rate of 1.56 Gbit/s. Use the forwarded clock for source-synchronous reception and confirm output timing, panel pixel format, and connector pin assignment against the system timing diagram.

Resumen de productos recomendados

DS90CF383AMTD Texas Instruments Se usa en: Small-Format LCD Display Interface, Industrial Human-Machine Interface, Medical Display Controller Interface, Automotive Navigation Display Link, Point-to-Point LVDS Data Link, Video Processing and Scaling Boards DS90C383BMTX/NOPB Related 3.3 V LVDS transceiver family member Se usa en: Small-Format LCD Display Interface, Industrial Human-Machine Interface, Automotive Navigation Display Link, Video Processing and Scaling Boards DS90CF383AMT Related ordering variant of the FPD-Link transceiver Se usa en: Medical Display Controller Interface, Point-to-Point LVDS Data Link
What is the DS90CF383AMTDX used for?
The DS90CF383AMTDX is a 3.3 V FPD-Link and LVDS transceiver used to connect a parallel CMOS/TTL video source to a differential LVDS display interface. It transmits four LVDS data pairs plus a forwarded clock and receives four differential data pairs. According to the Texas Instruments DS90CF383 product information, the device supports 24-bit parallel data and a maximum clock frequency of 65 MHz, making it suitable for flat-panel display and point-to-point LVDS links.
What is the maximum operating frequency of DS90CF383AMTDX?
The DS90CF383AMTDX operates at up to 65 MHz. At that clock rate, four transmitted LVDS data lanes each carry one bit per clock, producing an aggregate transmitted payload of 1.56 Gbit/s. The 65 MHz figure describes the device's parallel-interface operating clock rather than the serial line rate. Design the source, receiver, and cable or PCB interconnect to support this rate without excessive jitter or differential skew.
Where can I download the DS90CF383AMTDX datasheet PDF?
The official DS90CF383 datasheet and ordering information are available through the Texas Instruments product page at https://www.ti.com/product/DS90CF383. Use the manufacturer's pin-description table, electrical-characteristics tables, and application information when assigning PCB tracks or confirming a display-link design. A distributor-hosted copy is also listed at icDirectory, but the manufacturer page should be used as the primary reference for revisions and device documentation.
Where can I find the DS90CF383AMTDX pinout?
The DS90CF383AMTDX uses a 56-pin TSSOP, and its complete pin assignment is shown in the pin-description table of the Texas Instruments DS90CF383 datasheet. Use that table to identify the parallel data inputs, LVDS differential pairs, clock connections, power rails, and ground pins. The 56-pin numbering must match the physical footprint and the exposed-pad land pattern specified for the selected package option.
What is the difference between DS90CF383AMTDX and DS90CF383AMTD?
The DS90CF383AMTDX and DS90CF383AMTD are ordering variants of the same DS90CF383 28/4 FPD-Link transceiver family and are both cataloged in the 56-TSSOP format. Their headline interface ratings are unchanged at 3.3 V, 24-bit parallel data, and 65 MHz maximum clock frequency. Verify the exact ordering suffix, reel configuration, and delivery form against the manufacturer ordering information before releasing a production BOM.
Can SN65LVDS93ADGG replace the DS90CF383AMTDX?
The SN65LVDS93ADGG is not a pin-for-pin drop-in replacement for the DS90CF383AMTDX because the devices use different physical packages and implement different transmit and receive organizations. The DS90CF383AMTDX combines a 28/4 parallel interface with four LVDS data outputs, four LVDS inputs, and a forwarded clock link in a 56-TSSOP package. Treat the SN65LVDS93ADGG as a different LVDS transceiver function requiring board-level pin mapping and protocol verification.
Is DS90CF383AMTDX suitable for an LCD display interface?
Yes, the DS90CF383AMTDX is specifically suited to LVDS flat-panel display links because it combines a 24-bit parallel input interface with four differential outputs and a forwarded clock at up to 65 MHz. It can be used in small LCD panels, industrial human-machine interfaces, medical displays, and automotive navigation systems. The source data format, display timing, cable length, and receiver's LVDS input must match the device's operating requirements.
What is the difference between LVDS and FPD-Link in the DS90CF383AMTDX?
LVDS describes the low-voltage differential signaling method used on the cable or PCB links, while FPD-Link describes the parallel-to-serial display-interface architecture implemented by the device. The DS90CF383AMTDX accepts 28-bit parallel data, serializes it onto four LVDS data pairs, and provides a separate differential clock link. It also receives four LVDS data pairs for reverse-direction communication, combining the display transport and point-to-point functions in one package.
When should I choose DS90CF383AMTDX instead of a dedicated LVDS transmitter?
Choose the DS90CF383AMTDX when the design needs both parallel-to-LVDS transmission and reverse LVDS reception in one device and uses the FPD-Link 28/4 organization. A dedicated transmitter may be simpler for one-way links, but it generally leaves the reverse data path and clock-forwarding architecture to separate circuitry. Confirm that the connected display or receiver expects this data and clock arrangement before finalizing the selection.
How should DS90CF383AMTDX LVDS pairs be routed on a PCB?
Route the DS90CF383AMTDX LVDS signals as tightly coupled differential pairs with matched trace geometry, a continuous reference plane, and matched length within the receiver's permitted skew budget. Keep the connector and package differential escape paths free of unrelated traces, vias, and test pads where possible. Provide a low-impedance ground connection for the return current and follow the manufacturer's recommended decoupling and layout guidance in the DS90CF383 documentation.
What replaced the National Semiconductor DS90CF383AMTDX?
The DS90CF383AMTDX remains associated with the Texas Instruments product line because TI acquired National Semiconductor, and the manufacturer product page continues to identify the DS90CF383 family. The verified ordering listings also associate this MPN with National Semiconductor. For lifecycle confirmation, request the current status and lead time through the Request a Quote form on this page rather than assuming a replacement is available for an existing production design.
What is the best drop-in replacement for DS90CF383AMTDX?
The closest documented drop-in choices are the National Semiconductor or Texas Instruments ordering variants DS90CF383AMTD and DS90C383BMTX/NOPB, which use the same 56-TSSOP class of package and closely related 3.3 V 28/4 LVDS interface organization. Confirm pin names, timing limits, and any device-specific control requirements against the manufacturer datasheet. Avoid a direct substitution based only on package size or transmitter count.
How many LVDS data pairs does the DS90CF383AMTDX provide?
The DS90CF383AMTDX provides four differential LVDS data outputs and four differential LVDS data inputs, matching its 28/4 transceiver designation. The parallel side accommodates 28 data and control functions, while the serial side carries pixel or control data over four pairs with a separate forwarded clock. The 65 MHz maximum clock and 3.3 V operating supply make it appropriate for conventional low-voltage display links.
Can I buy DS90CF383AMTDX online?
The DS90CF383AMTDX can be ordered through the Request a Quote form on this page. The form lets you confirm current unit availability, quantity breaks, reel packaging, and delivery timing for your specific BOM. A directory listing records inventory and a unit-price reference, but request a current quotation for the exact suffix and packing configuration used in production.
What is the price and lead time for DS90CF383AMTDX?
Use the Request a Quote form on this page for the current price, minimum order quantity, and lead time for DS90CF383AMTDX. Pricing and availability depend on order quantity, reel configuration, and current channel inventory, so the quotation reflects the exact quantity and suffix entered. This approach also captures a manufacturing schedule suitable for the assembly lot instead of relying on a static directory reference.
What are the key specifications of DS90CF383AMTDX that engineers should know?
The DS90CF383AMTDX is a 3.3 V, 24-bit FPD-Link LVDS transceiver with a 3 V to 3.6 V supply range, a 65 MHz maximum clock, four differential outputs, four differential inputs, and a 56-TSSOP package. Its combined transmit and receive architecture reduces the number of separate interface devices in a bidirectional link. The main design constraints are LVDS routing quality, matched differential geometry, correct clocking, and compliance with the connected panel's input format.

Datos de referencia de ingeniería para DS90CF383AMTDX — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Select the DS90CF383AMTDX when a 3.3 V system must interface with an LVDS panel through the 28/4 FPD-Link organization and needs both forward transmission and reverse reception. The 24-bit parallel input, four LVDS data outputs, forwarded clock, and 65 MHz maximum clock make it appropriate for small-format LCDs, industrial HMIs, medical panels, and automotive navigation displays. Choose DS90CF383AMTD or DS90CF383AMT when those ordering variants provide the required logistics or packing advantage while retaining the same interface ratings. Choose DS90C383BMTX/NOPB only after checking device-specific timing, control, and receive-path requirements against the manufacturer documentation. Do not substitute the SN65LVDS93ADGG or SN75LVDS83ADGG directly because their package and interface organizations differ. In every case, verify the panel timing format, receive thresholds, temperature requirements, and LVDS routing constraints before releasing the PCB layout.

Comparación con alternativas

Parámetro Este producto DS90CF383AMTD DS90CF383AMT DS90C383BMTX/NOPB
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 56-TSSOP 56-TSSOP - same package 56-TSSOP - same package 56-TSSOP - same package
Product Type 28/4 FPD-Link LVDS Transceiver 28/4 FPD-Link LVDS Transceiver 28/4 FPD-Link LVDS Transceiver 28/4 LVDS Transceiver family member
Nominal Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V
Maximum Clock Frequency 65 MHz 65 MHz 65 MHz 65 MHz
Parallel Data Width 24 bit 24 bit 24 bit 24 bit
LVDS Transmit Pairs 4 differential outputs 4 differential outputs 4 differential outputs 4 differential outputs
Protocol FPD-Link FPD-Link FPD-Link FPD-Link / LVDS family interface
Mounting Type Surface Mount Surface Mount Surface Mount Surface Mount

Diferenciadores clave

  • Integrated bidirectional display interface (frente a DS90C383BMTX/NOPB)
  • Direct family ordering alternatives (frente a DS90CF383AMTD)
  • High-speed multi-lane throughput (frente a DS90CF383AMT)

Notas de diseño

Route every LVDS pair as a tightly coupled differential pair with identical geometry and a continuous reference plane beneath the pair. Keep the logic side, connector, and transceiver ground paths connected through a low-impedance plane rather than a narrow trace. Avoid adding test pads, vias, or unrelated traces to the differential escape area. Match pair lengths according to the connected receiver's permitted skew, and account for the forwarded clock pair when calculating source-synchronous timing margins.

The 65 MHz maximum clock produces an aggregate transmitted payload of 1.56 Gbit/s across four data lanes, so edge-rate-dependent effects become more important than the clock frequency alone suggests. Use the manufacturer's recommended termination and interface topology, maintain short unterminated branches, and verify receiver thresholds, lane-to-lane skew, and clock/data alignment with eye-diagram or sampling measurements. A clean output at the transmitter does not by itself guarantee adequate margin after a connector and PCB route.

Place the device's local supply-decoupling capacitors immediately adjacent to the corresponding power and ground pins, following the capacitor values and placement shown in the manufacturer datasheet. Route the exposed thermal connection, if used, with a low-impedance via array into the relevant ground plane to improve heat transfer. Separate noisy digital return currents from sensitive panel-interface references where practical, and verify the rail remains within the 3 V to 3.6 V device range under simultaneous transmit and receive activity.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No compliance declarations are stated on the manufacturer or distributor listing excerpts used for this product. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with Texas Instruments for the exact ordering code before production release.

Datos verificados el: 2026-11-16 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

DS90CF383AMTDX datasheet DS90CF383AMTDX pinout DS90CF383AMTDX datasheet pdf DS90CF383AMTDX equivalent DS90CF383AMTDX replacement DS90CF383AMTDX cross reference DS90CF383AMTDX vs DS90CF383AMTD DS90CF383 56-TSSOP pinout DS90CF383AMTDX FPD-Link LVDS DS90CF383AMTDX price DS90CF383AMTDX stock Texas Instruments DS90CF383AMTDX

Componentes & términos relacionados

Texas Instruments National Semiconductor DS90CF383AMTDX DS90CF383AMTD DS90CF383AMT DS90C383BMTX/NOPB FPD-Link LVDS flat panel display display interface interface transceiver parallel-to-serial converter serial-to-parallel converter LVDS differential signaling low-voltage differential signaling forwarded clock source-synchronous clocking 56-TSSOP TSSOP package family surface-mount package 3.3 V power supply 65 MHz clock 24-bit parallel data LVDS receiver LVDS transmitter
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ