DS90CF383AMTDX - 3.3V 24-Bit FPD-Link LVDS Transceiver
MPN: DS90CF383AMTDX ✓ Hoạt độngDS90CF383AMTDX Tóm tắt
An FPD-Link transceiver is a display-interface IC that carries high-speed digital video and control traffic between a graphics or video source and a flat-panel display. In the signal chain, this device sits between parallel logic and a low-voltage differential display link. LVDS uses small-amplitude differential signaling to reduce common-mode noise, provide good electromagnetic-immunity behavior, and support reliable point-to-point cable or PCB connections at high data rates.
The DS90CF383AMTDX supports a 3 V to 3.6 V supply range and a 65 MHz operating clock, giving the parallel interface a theoretical aggregate payload rate of 1.56 Gbit/s across the four transmitted data lanes. Its 28/4 architecture accommodates 24 bits of pixel or control data together with the associated clock, control, and enable functions. The 56-TSSOP surface-mount package also includes an exposed-thermal-pad option in the family, supporting improved heat transfer on multilayer PCB designs.
Typical uses include small-format LCD panels, industrial HMIs, medical display controllers, automotive navigation displays, and video-processing boards that connect an LVDS display port to a parallel CMOS source. The same bidirectional interface can also be considered for point-to-point LVDS links when a compatible receiving system recognizes the device's transmission format and clocking scheme.
PCB implementation requires careful treatment of the high-speed differential nets. Route each LVDS pair as a tightly coupled, length-matched pair, provide a continuous reference plane, and avoid placing test pads or unrelated traces in the differential escape region. Keep the logic supply and the LVDS connector ground return tied through a low-impedance plane rather than relying on narrow neck-down paths.
This product page brings together the device function, verified ordering information, drop-in alternatives, and application-specific engineering guidance so engineers can evaluate the DS90CF383AMTDX before integrating it into an LVDS display interface.
Bộ thay thế dễ dàng lắp đặt cho DS90CF383AMTDX — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
DS90CF383AMTD
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →DS90CF383AMT
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DS90C383BMTX/NOPB
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DS90CF383AMTDX Thông số kỹ thuật
| Product Type | 28/4 FPD-Link and LVDS Transceiver |
| Điện áp cung cấp | 3 V to 3.6 V |
| Nominal Supply Voltage | 3.3 V |
| Loại giao diện | LVDS / FPD-Link |
| Parallel Data Width | 24 bit |
| LVDS Data Outputs | 4 differential outputs |
| LVDS Data Inputs | 4 differential inputs |
| Tần số xung maksimum | 65 MHz |
| Transceiver Configuration | 28/4 |
| Protocol | FPD-Link |
| Hộp | 56-TSSOP (TFSOP), 0.240 inch body width, 6.10 mm |
| Kiểu lắp đặt | Surface Mount |
| Manufacturer | Texas Instruments / National Semiconductor |
Hướng dẫn cấu hình chân DS90CF383AMTDX 56-tssop (tfsop), 0.240 inch body width, 6.10 mm
Cấu hình chân cho DS90CF383AMTDX (56-tssop (tfsop), 0.240 inch body width, 6.10 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho DS90CF383AMTDX.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
DS90CF383AMTDX phù hợp cho 6 Áp dụngs: Small-Format LCD Display Interface, Industrial Human-Machine Interface, Medical Display Controller Interface, Automotive Navigation Display Link, Point-to-Point LVDS Data Link, Video Processing and Scaling Boards.
Small-Format LCD Display Interface
The DS90CF383AMTDX fits a parallel-to-LVDS display link in which a controller supplies 24 bits of pixel and control data at up to 65 MHz. Placing the transceiver between the CMOS/TTL source and an LVDS panel connector consolidates the four data lanes, forwarded clock, and reverse data path in one 56-TSSOP device. The 3 V to 3.6 V operating range is compatible with 3.3 V display-controller logic. Pair routing must preserve closely matched differential geometry and adequate return-current paths, while the panel's timing, input format, and clock requirement must be checked before layout release.
Được đề xuất
Industrial Human-Machine Interface
An industrial HMI can use the DS90CF383AMTDX to move display data over a compact differential interface instead of routing 24 parallel signal lines to a remote panel. The four LVDS transmit pairs support an aggregate payload of 1.56 Gbit/s at the 65 MHz maximum clock, while the receive pairs provide a return path for control traffic. This arrangement reduces connector pin count and can improve immunity to industrial noise. Validate industrial temperature requirements, isolation strategy, enclosure grounding, and panel timing because those conditions are not established by the basic device ratings.
Được đề xuất
Medical Display Controller Interface
The DS90CF383AMTDX can bridge a medical display controller to an LVDS panel by accepting parallel CMOS/TTL data and transmitting it over four differential pairs with a forwarded clock. Differential signaling provides a practical foundation for reliable panel connections in equipment where cable routing and electromagnetic coupling are significant concerns. The 65 MHz operating limit supports higher pixel rates than many older display interfaces, while the integrated receive path can support control traffic. Medical designs must still verify radiation, immunity, operating-temperature, and qualification requirements separately because those standards are not assigned to this device by the manufacturer listing.
Được đề xuất
Automotive Navigation Display Link
The DS90CF383AMTDX is architecturally suited to a compact navigation-display link that carries video and control data from an entertainment or instrument controller to an LVDS panel. Its 24-bit parallel input, four differential outputs, and separate forwarded clock reduce the number of high-speed board traces, while the receive channels can carry commands back to the source. At 65 MHz, the transmitted data lanes carry an aggregate 1.56 Gbit/s. Automotive qualification, temperature range, transient immunity, and display timing must be confirmed for the exact ordering option before use in a vehicle.
Được đề xuất
Point-to-Point LVDS Data Link
The bidirectional capability of the DS90CF383AMTDX supports point-to-point links in addition to conventional display transfers. The transmitter serializes 28-bit parallel data onto four LVDS lanes, while four receive lanes accept differential data in the opposite direction; a fifth differential output forwards the transmitted clock. This arrangement can connect two processing boards when both endpoints use compatible data organization and clocking. Because the link is not a generic serial protocol, the endpoint firmware, framing, and clock relationships must be established before substituting this device for a standard LVDS serializer.
Được đề xuất
Video Processing and Scaling Boards
A video processor or scaler with a parallel output can connect to an LVDS display through the DS90CF383AMTDX. The device separates the parallel logic domain from the low-amplitude differential link domain, reducing the number of long parallel traces that would otherwise need controlled-impedance routing across the board. At the 65 MHz maximum operating clock, the four data outputs provide a nominal aggregate rate of 1.56 Gbit/s. Use the forwarded clock for source-synchronous reception and confirm output timing, panel pixel format, and connector pin assignment against the system timing diagram.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho DS90CF383AMTDX — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | DS90CF383AMTD | DS90CF383AMT | DS90C383BMTX/NOPB |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 56-TSSOP | 56-TSSOP - same package | 56-TSSOP - same package | 56-TSSOP - same package |
| Product Type | 28/4 FPD-Link LVDS Transceiver | 28/4 FPD-Link LVDS Transceiver | 28/4 FPD-Link LVDS Transceiver | 28/4 LVDS Transceiver family member |
| Nominal Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Maximum Clock Frequency | 65 MHz | 65 MHz | 65 MHz | 65 MHz |
| Parallel Data Width | 24 bit | 24 bit | 24 bit | 24 bit |
| LVDS Transmit Pairs | 4 differential outputs | 4 differential outputs | 4 differential outputs | 4 differential outputs |
| Protocol | FPD-Link | FPD-Link | FPD-Link | FPD-Link / LVDS family interface |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount | Surface Mount |
Bảo phân biệt quan trọng
- Integrated bidirectional display interface (vsDS90C383BMTX/NOPB)
- Direct family ordering alternatives (vsDS90CF383AMTD)
- High-speed multi-lane throughput (vsDS90CF383AMT)
Ghi chú thiết kế
Route every LVDS pair as a tightly coupled differential pair with identical geometry and a continuous reference plane beneath the pair. Keep the logic side, connector, and transceiver ground paths connected through a low-impedance plane rather than a narrow trace. Avoid adding test pads, vias, or unrelated traces to the differential escape area. Match pair lengths according to the connected receiver's permitted skew, and account for the forwarded clock pair when calculating source-synchronous timing margins.
The 65 MHz maximum clock produces an aggregate transmitted payload of 1.56 Gbit/s across four data lanes, so edge-rate-dependent effects become more important than the clock frequency alone suggests. Use the manufacturer's recommended termination and interface topology, maintain short unterminated branches, and verify receiver thresholds, lane-to-lane skew, and clock/data alignment with eye-diagram or sampling measurements. A clean output at the transmitter does not by itself guarantee adequate margin after a connector and PCB route.
Place the device's local supply-decoupling capacitors immediately adjacent to the corresponding power and ground pins, following the capacitor values and placement shown in the manufacturer datasheet. Route the exposed thermal connection, if used, with a low-impedance via array into the relevant ground plane to improve heat transfer. Separate noisy digital return currents from sensitive panel-interface references where practical, and verify the rail remains within the 3 V to 3.6 V device range under simultaneous transmit and receive activity.
Thông tin tuân thủ
No compliance declarations are stated on the manufacturer or distributor listing excerpts used for this product. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with Texas Instruments for the exact ordering code before production release.