DSPIC30F6013A-20I/PT - 20 MIPS 16-bit DSC 132KB Flash | Microchip
N.º de pieza: DSPIC30F6013A-20I/PT ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $14.85 | $14,85 |
| 10 | $13.42 | $134,20 |
| 100 | $11.9 | $1.190,00 |
| 500 | $10.65 | $5.325,00 |
| 1.000 | $9.75 | $9.750,00 |
DSPIC30F6013A-20I/PT Descripción general
A Digital Signal Controller (DSC) is a hybrid device that combines the control flexibility of a microcontroller with the computational throughput of a Digital Signal Processor (DSP). DSCs sit in the hierarchy: DSC -> microcontroller -> embedded processor -> semiconductor. The dsPIC30F family targets 5V applications where DSP precision is required, distinct from the dsPIC33F family which targets 3.3V operation at 40 MIPS. The dsPIC30F core executes most instructions in one clock cycle and includes a hardware MAC for 16x16-bit operations in a single cycle.
Key features include 20 MIPS by default CPU performance, integrated 10-bit ADC, up to 8 PWM outputs, encoder interface, 5x16-bit timers, two UART, two SPI, one I2C, and one CAN module. The 132KB Flash supports self-programming via ICSP, enabling field firmware updates. The 6KB RAM allows substantial data buffering for DSP routines and protocol stacks.
Typical applications include motor control (BLDC, PMSM, ACIM), power conversion (digital PFC, UPS, inverters), industrial automation (servo drives, CNC), automotive body and powertrain controllers, and audio processing. The CAN bus peripheral enables integration into automotive CAN networks, while the encoder interface simplifies closed-loop motion control without external hardware.
When designing with this device, ensure that code protection bits are configured before deployment and that the ICSP pins are isolated from application circuitry to allow in-circuit programming. The TQFP-80 package requires a ground plane beneath for thermal management and EMI mitigation.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone. Source: Microchip datasheet family reference DS70143E and dsPIC30F Family Reference Manual DS70046.
Alternativas directas para DSPIC30F6013A-20I/PT — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con DSPIC30F6013A-20I/PT (mismo factor de forma y huella) — difiere en ADC, Package, Timers, Operating Temperature, Program Memory.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
DSPIC30F6013AT-20I/PT
✅ Sustitución directa✓ En stock
$7.45 / unidad
Ver hoja de datos →DSPIC30F6013A-30I/PT
✅ Sustitución directa✓ En stock
$10.93 / unidad
Ver hoja de datos →DSPIC30F6013A-20E/PT
✅ Sustitución directa✓ En stock
$9.65 / unidad
Ver hoja de datos →DSPIC30F6014A-20I/PT
✅ Sustitución directa✓ En stock
$7.65 / unidad
Ver hoja de datos →DSPIC30F6012A-20I/PT
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$10.1 / unidad
Ver hoja de datos →DSPIC30F6013AT-20I/PF
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
DSPIC30F6013A-20I/PT Valores máximos y características eléctricas
| Core Architecture | dsPIC30F 16-bit Digital Signal Controller |
| CPU Bit Size | 16-bit |
| Performance | 20 MIPS |
| Program Memory | 132 KB Flash (44K x 24) |
| RAM | 6 KB |
| Tensión de alimentación | 2.5 V to 5.5 V |
| Temperatura de funcionamiento | -40 C to +85 C (Industrial) |
| Encapsulado | 80-pin TQFP (PT) 12x12 mm |
| Tipo de montaje | Surface Mount |
| Communication Interfaces | CAN, I2C, SPI, UART/USART |
| ADC | 10-bit (per datasheet DS70143E) |
| PWM Outputs | Yes (Motor Control PWM) |
| Timers | 5 x 16-bit (per family datasheet) |
| Encoder Interface | Yes (Quadrature Encoder) |
| Nivel MSL | 3 (per JEDEC J-STD-020) |
| Estado RoHS | Compliant |
| Lead-Free | Yes |
| AEC-Q100 Qualification | Not automotive grade |
Guía de configuración de pines de DSPIC30F6013A-20I/PT 80-pin tqfp (pt) 12x12 mm
Configuración de pines para DSPIC30F6013A-20I/PT (encapsulado 80-pin tqfp (pt) 12x12 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para DSPIC30F6013A-20I/PT.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
DSPIC30F6013A-20I/PT es adecuado para 6 aplicacións: BLDC Motor Control, Digital Power Conversion (PFC, UPS, Inverters), Industrial Automation & CNC Servo Drives, Automotive Body Controllers, Audio Processing & Effects, Sensor Signal Conditioning & Filtering.
BLDC Motor Control
DSPIC30F6013A-20I/PT is well-suited for brushless DC motor control where field-oriented control loops must execute within tight timing budgets. With 20 MIPS throughput and hardware 16x16-bit MAC, the device computes Park and Clarke transforms for FOC algorithms while the integrated Motor Control PWM module generates complementary 3-phase switching signals at up to 20 kHz. The Quadrature Encoder Interface reads rotor position directly without external logic, and the 10-bit ADC samples phase currents synchronously to PWM edges. Place the DSC between the gate driver and the position sensor, using CAN bus for command feedback. Real-world design: DSPIC30F6013A-20I/PT replaces discrete MCU plus FPGA combinations in 1 kW servo drives, reducing BOM cost while meeting 10 kHz current loop bandwidth.
Recomendado
Digital Power Conversion (PFC, UPS, Inverters)
For digital power factor correction and uninterruptible power supplies, DSPIC30F6013A-20I/PT executes control loops at switching frequencies up to 20 kHz with deterministic latency. The hardware MAC accelerates RMS calculations and IIR filters for power quality monitoring, while the 10-bit ADC captures voltage and current feedback with sub-microsecond conversion time. The 132KB Flash accommodates complex control firmware including state machines, protection logic, and communication stacks (Modbus, CAN). Application example: 3 kW solar inverter MPPT stage where DSPIC30F6013A-20I/PT computes incremental conductance MPPT every 100 ms while handling grid synchronization via zero-cross detection. The wide 2.5V to 5.5V supply range supports 5V gate driver interfaces directly without level shifters.
Recomendado
Industrial Automation & CNC Servo Drives
In CNC machinery and industrial servo drives, DSPIC30F6013A-20I/PT serves as the central motion controller, executing trajectory planning and PID control for multiple axes. The CAN interface integrates with industrial CANopen networks, while the 5 timers generate synchronized PWM for stepper and servo motor control. The 6KB RAM supports G-code buffering and kinematic calculations for 3-axis machines. Real-world application: pick-and-place machine where DSPIC30F6013A-20I/PT coordinates X-Y-Z servo axes with 1 ms cycle time, communicating vision trajectory via SPI to a camera module. The -40C to +85C industrial temperature rating suits factory floor environments with ambient temperatures near 70C inside sealed control cabinets.
Recomendado
Automotive Body Controllers
DSPIC30F6013A-20I/PT is appropriate for automotive body electronics modules (not AEC-Q100 qualified, but used in non-safety body systems), including HVAC blowers, seat controllers, and lighting modules. The CAN peripheral integrates with vehicle CAN buses at 500 kbps, and the 2.5V to 5.5V supply tolerates load-dump transients when paired with proper TVS protection. The 20 MIPS throughput handles multiple LIN slave tasks, PWM for motor control, and ADC sampling for sensor inputs. Application example: HVAC blower controller where DSPIC30F6013A-20I/PT regulates BLDC fan speed via FOC algorithm and reports status via CAN, replacing legacy 8-bit MCUs with limited DSP capability.
Recomendado
Audio Processing & Effects
For audio applications, DSPIC30F6013A-20I/PT executes real-time audio effects algorithms (reverb, EQ, dynamics) with 20 MIPS throughput sufficient for 48 kHz stereo processing. The hardware MAC accelerates biquad filter calculations for parametric EQ, while the SPI interface connects to external audio codecs. The 6KB RAM buffers 50 ms of stereo audio at 48 kHz with 16-bit samples, sufficient for delay-based effects. Application example: guitar multi-effects pedal where DSPIC30F6013A-20I/PT runs multiple effect chains (overdrive, chorus, delay) in series with 5 ms total latency. Compared to a generic MCU, the DSC's DSP engine eliminates need for external DSP chip, reducing BOM by 30-40% in cost-sensitive audio products.
Recomendado
Sensor Signal Conditioning & Filtering
DSPIC30F6013A-20I/PT excels in sensor signal conditioning where raw sensor outputs require DSP-based filtering before ADC-to-network transmission. The 20 MIPS throughput implements IIR and FIR filters for noise reduction, while the 10-bit ADC captures conditioned signals. Application example: industrial load cell signal conditioning where DSPIC30F6013A-20I/PT applies 50/60 Hz mains rejection filter (notch filter, 40 dB attenuation) and averages 16 samples per measurement cycle, achieving 16-bit effective resolution from the 10-bit ADC. The CAN bus transmits filtered weight values to a central controller at 100 Hz update rate.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para DSPIC30F6013A-20I/PT — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | DSPIC30F6013AT-20I/PT | DSPIC30F6013A-30I/PT | DSPIC30F6013A-20E/PT | DSPIC30F6014A-20I/PT | DSPIC30F6012A-20I/PT | DSPIC30F6013AT-20I/PF |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-80 (PT) | TQFP-80 (PT) - same | TQFP-80 (PT) - same | TQFP-80 (PT) - same | TQFP-80 (PT) - same | TQFP-80 (PT) - same | TQFP-80 (PT) - same |
| Performance | 20 MIPS | 20 MIPS | 30 MIPS (+50%) | 20 MIPS | 20 MIPS | 20 MIPS | 20 MIPS |
| Flash Memory | 132 KB | 132 KB | 132 KB | 132 KB | 144 KB (+9%) | 84 KB (-36%) | 132 KB |
| RAM | 6 KB | 6 KB | 6 KB | 6 KB | 8 KB (+33%) | 8 KB (+33%) | 6 KB |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +85 C | -40 C to +85 C | -40 C to +125 C (Extended) | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| Supply Voltage | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V |
| Communication | CAN, I2C, SPI, UART | CAN, I2C, SPI, UART | CAN, I2C, SPI, UART | CAN, I2C, SPI, UART | CAN, I2C, SPI, UART | CAN, I2C, SPI, UART | CAN, I2C, SPI, UART |
Diferenciadores clave
- Wider supply voltage tolerance including 5V operation (frente a DSPIC33F family devices)
- Larger memory for complex DSP routines (frente a DSPIC30F4013-20I/ML (lower-pin variant))
- Full peripheral set including CAN bus and 80-pin TQFP (frente a DSPIC30F5015-30I/PT (64-pin variant))
Notas de diseño
The 80-pin TQFP package requires a continuous ground plane beneath the IC for thermal management and EMI suppression. Place at least one ground via per quadrant of the package land pattern, with vias placed within 5 mm of each exposed pad edge. Decouple VDD/VSS pairs with 100 nF ceramic capacitors placed within 3 mm of the supply pins, and add a 10 uF bulk capacitor per VDD rail. Failure to provide adequate ground stitching results in radiated emissions 10-15 dB above compliance limits per typical EMC measurements.
Do not connect ICSP pins (PGDx, PGCx, MCLR) directly to application circuitry without isolation resistors or buffers. These pins are used for in-circuit serial programming and must be accessible by the programmer. If application circuits load these pins, programming will fail. Always include a programming header or test points for ICSP access in production designs, even if final products are pre-programmed.
Estimated: At maximum CPU activity with all peripherals enabled, DSPIC30F6013A-20I/PT draws approximately 70 mA from a 5V supply. Add a 100 mA-rated LDO regulator (such as MCP1700) with input bulk capacitance of at least 10 uF and output capacitance of 1 uF ceramic to handle transient CPU load spikes during DSP-intensive calculations. Brown-out reset (BOR) should be enabled in configuration bits to prevent code execution at insufficient VDD.
The TQFP-80 package has a theta_JA of approximately 50 C/W. At 70 mA typical current draw from 5V, power dissipation is 350 mW, resulting in a 17.5C junction temperature rise above ambient. In enclosed industrial cabinets at 60C ambient, junction temperature reaches 77.5C, well within the 85C industrial limit. For high-temperature applications exceeding 70C ambient, consider the DSPIC30F6013A-20E/PT variant rated to +125C.
Información de cumplimiento
RoHS compliant per Microchip product page. Not AEC-Q100 qualified; for AEC-Q100 automotive applications, select dedicated AEC-Q100 qualified DSC variants from Microchip. Halogen-free status not explicitly stated in provided data; set to unknown.
