FX18-60P-0.8SV - 60-Pin 0.8mm Pitch Board-to-Board Header | Hirose
N.º de pieza: FX18-60P-0.8SV ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $1.58 | $1,58 |
| 10 | $1.42 | $14,20 |
| 100 | $1.18 | $118,00 |
| 500 | $0.97 | $485,00 |
| 1.000 | $0.84 | $840,00 |
FX18-60P-0.8SV Descripción general
A Board-to-Board (B2B) connector is a type of interconnect that joins two printed circuit boards electrically and mechanically, either in a stacked (mezzanine), coplanar, or right-angle configuration. The FX18 Series sits within the family hierarchy of mezzanine connector -> board-to-board connector -> rectangular connector -> electronic interconnect, and is engineered specifically for high-speed digital signaling required by modern serial bus standards. Within the broader connector ecosystem, B2B headers like the FX18 are classified as plug-side components, paired with FX18 receptacle (socket) counterparts of the same pin count and pitch.
Key features include 60 contacts on a 0.8 mm pitch, a rated current up to 12 A on power contacts, gold contact plating for low contact resistance, surface-mount termination with retention features, and support for 3-step sequential mating. The FX18 Series supports data rates up to 10 Gbps, enabling compatibility with standards such as PCI Express, SATA, and high-speed LVDS. Operating temperature ranges of up to 125 C with heat-resistant options are available for thermally demanding enclosures.
The connector uses a precision-stamped contact design with optimized contact geometry to maintain signal integrity at multi-gigabit speeds, and it is supplied in tape-and-reel packaging compatible with automated SMT placement. The vertical orientation and outer shroud layout facilitate dense routing on stacked or coplanar PCB assemblies, particularly where conventional headers cannot accommodate the required pin count within the available board real estate.
Typical applications include Open Pluggable Specification (OPS 2.0) digital signage modules, server backplanes, industrial control boards, embedded computing platforms, and test-and-measurement instrumentation where high-density, high-speed interconnects are required. The 0.8 mm pitch enables fine-pitch routing while the multi-functional contacts reduce the total pin count required for power distribution.
When designing with this connector, verify the mating receptacle (FX18-60S-0.8SV family) for pin compatibility and ensure PCB land patterns match the Hirose-recommended footprint. Use the manufacturer's recommended PCB keep-out and pick-and-place footprints for reliable automated assembly.
This page synthesizes distributor pricing, drop-in variants within the Hirose FX18 family, and practical design notes not aggregated in a single manufacturer datasheet.
Alternativas directas para FX18-60P-0.8SV — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
FX18-60P-0.8SV
✅ Sustitución directa✓ En stock
$0.84 / unidad
Ver hoja de datos →FX18-60P-0.8SV
✅ Sustitución directa✓ En stock
$0.84 / unidad
Ver hoja de datos →FX18-60P-0.8SV Especificaciones
| Series | FX18 |
| Connector Type | Plug (Header), Outer Shroud Contacts |
| Number of Positions | 60 |
| Pitch | 0.8 mm |
| Tipo de montaje | Surface Mount (SMT), Vertical |
| Contact Plating | Gold |
| Rated Current (Power Contact) | 12 A (max, MF contact) |
| Velocidad de datos | Up to 10 Gbps |
| Multi-Functional Contact | Yes (signal + ground + power in one pin) |
| Sequential Mating | 3-step sequential |
| Mating Direction | Vertical (coplanar / mezzanine) |
| Temperatura de funcionamiento | Up to 125 C (heat-resistant option) |
| Industry Standard | Open Pluggable Specification (OPS 2.0) compatible |
| Packaging | Tape & Reel |
| RoHS Compliance | RoHS (EU) 2015/863 compliant |
| Mating Receptacle | FX18-60S-0.8SV family |
Guía de configuración de pines de FX18-60P-0.8SV standard
Configuración de pines para FX18-60P-0.8SV (encapsulado standard). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para FX18-60P-0.8SV.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
FX18-60P-0.8SV es adecuado para 6 aplicacións: Open Pluggable Specification (OPS 2.0) Digital Signage, Server Backplane and Embedded Computing, Industrial Control and Factory Automation, Test and Measurement Instrumentation, Networking Switch and Router Modules, Medical Imaging and Diagnostic Equipment.
Open Pluggable Specification (OPS 2.0) Digital Signage
The FX18-60P-0.8SV is a Hirose-specified OPS 2.0 plug header used on digital signage plug-in modules. Its 60 positions at 0.8 mm pitch carry multi-gigabit display data (up to 10 Gbps) plus the 12 A power contacts needed to supply backlight and SoC rails from the OPS 2.0 host backplane. According to the FX18 family datasheet, the multi-functional contact combines signal, ground, and power on one pin, dramatically reducing the connector pin count required for OPS 2.0 compliance versus discrete signal/power headers.
Recomendado
Server Backplane and Embedded Computing
The FX18-60P-0.8SV is widely used as a mezzanine interconnect between server CPU/Switch boards and daughtercards. Its 0.8 mm pitch and 10 Gbps per-channel capability handle PCIe Gen3 and high-speed LVDS links, while the 12 A MF power contacts supply point-of-load rails without routing separate power headers. According to Hirose FX18 family documentation, the 3-step sequential mating enables hot-plug-style staged contact engagement, important in serviceable server backplane designs.
Recomendado
Industrial Control and Factory Automation
The FX18-60P-0.8SV's heat-resistant option supports up to 125 C operation, making it suitable for sealed industrial enclosures and factory automation controllers. Its outer shroud provides mechanical robustness in high-vibration mounting locations, and the 12 A power contacts can drive motor-driver low-voltage rails directly. According to Hirose reliability data, the FX18 series is qualified for industrial safety standards and is specified for long-life factory automation deployments.
Recomendado
Test and Measurement Instrumentation
High-pin-count test instruments use the FX18-60P-0.8SV to dock removable probe or front-panel modules carrying sensitive analog and high-speed digital signals. The 0.8 mm pitch keeps the connector footprint small while the 10 Gbps capability preserves signal integrity for high-speed ADC/DAC data paths. According to the Hirose FX18 datasheet, the multi-functional contact design reduces crosstalk by integrating ground returns adjacent to each signal pin, important for low-noise measurement front ends.
Recomendado
Networking Switch and Router Modules
The FX18-60P-0.8SV supports high-speed SERDES links between networking line cards and switch ASIC boards, with up to 10 Gbps per channel enabling multi-lane Ethernet and PCIe aggregation. The vertical SMT orientation keeps line-card stack heights low, while the 12 A MF power contacts feed PoE and switch-ASIC supply rails. According to the Hirose FX18 family specification, the connector's optimized contact geometry is designed to minimize insertion loss and reflection at multi-gigabit signaling frequencies.
Recomendado
Medical Imaging and Diagnostic Equipment
Medical imaging systems use the FX18-60P-0.8SV to interconnect detector boards, processing boards, and display modules within compact diagnostic enclosures. The 0.8 mm pitch and multi-gigabit capability support uncompressed image data transfer, while the 12 A power contacts handle detector bias and processing-board rails. According to the Hirose FX18 family datasheet, the high-reliability contact design and gold plating meet the long-life and low-resistance requirements of medical imaging deployments.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para FX18-60P-0.8SV — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | FX18-60P-0.8SV(11) | FX18-60P-0.8SV(30) |
|---|---|---|---|
| Brand | Hirose Electric | Hirose Electric | Hirose Electric |
| Package / Mounting | Vertical SMT, 60-pos, 0.8 mm pitch | Vertical SMT, 60-pos, 0.8 mm pitch - same | Vertical SMT, 60-pos, 0.8 mm pitch - same |
| Number of Positions | 60 | 60 | 60 |
| Pitch | 0.8 mm | 0.8 mm | 0.8 mm |
| Data Rate | Up to 10 Gbps | Up to 10 Gbps | Up to 10 Gbps |
| Power Contact Current | 12 A (MF contact) | 12 A (MF contact) | 12 A (MF contact) |
| Contact Plating | Gold | Gold | Gold |
| Sequential Mating | 3-step | 3-step | 3-step |
| Specification Code | Base (-) | (11) variant | (30) variant |
Diferenciadores clave
- Multi-functional contact combines signal, ground, and 12 A power in a single pin (frente a Discrete signal + power headers (typical alternative architectures))
- Optimized for 10 Gbps high-speed transmission (frente a Standard 0.8 mm pitch B2B headers)
- OPS 2.0 standard compatibility (frente a Proprietary B2B header designs)
Notas de diseño
Use Hirose's official Allegro or Altium footprint for the FX18-60P-0.8SV to ensure correct pad geometry and stencil apertures. The 0.8 mm pitch and outer shroud contacts require precise land pattern registration - even 0.05 mm misalignment can degrade contact reliability and mating force. Recommended PCB thickness is 1.6 mm with ENIG or OSP surface finish for gold-plated SMT contacts.
For high-speed channels above 5 Gbps, maintain a continuous ground reference under the connector using a ground plane in layer 2. The multi-functional contact design returns signal current through adjacent ground pins, but the PCB stack-up must support the return path; avoid routing signal traces across the connector footprint region on inner layers.
Verify the mating receptacle (FX18-60S-0.8SV family) before PCB layout - mixing vertical and right-angle receptacle variants with the vertical FX18-60P-0.8SV plug will not engage mechanically. Also confirm that the (11) or (30) specification-code variants you are using match the BOM callout of your reference design, as some FX18 sub-variants alter the sequential-mating pin assignments.
Información de cumplimiento
RoHS (EU) 2015/863 compliant per Hirose product page CL0579-0017-2-00. Reach and conflict-minerals compliance per Hirose corporate statements. Halogen-free status not explicitly stated in the verified web data. AEC-Q100 not applicable (connector, not semiconductor).