INA250A4PW - 36V Bidirectional Current Sense Amplifier | Texas Instruments
N.º de pieza: INA250A4PW ✓ ActivoINA250A4PW Descripción general
A current-sense amplifier is a specialized analog signal-conditioning device that measures the voltage generated across a precision shunt resistor and converts that voltage into a proportional output. The INA250 belongs to the current-shunt monitor hierarchy, combining a low-side or high-side bidirectional current-measurement circuit with integrated precision resistance. This integration removes the need for a separate external shunt while improving calibration consistency and reducing board area.
The A4 gain version provides 4000 V/V voltage gain, allowing small shunt-generated signals to be amplified into a voltage that can be measured accurately by an ADC, microcontroller, or control system. Bidirectional operation allows current in either direction to be distinguished around a zero-volt reference. An external reference voltage can also shift the output operating point, supporting systems that require a nonzero current indication at zero current.
The integrated shunt and precision signal path provide calibrated measurement accuracy with very low temperature-drift performance. Because the common-mode range extends to 36 V, the device can monitor power-conversion, motor-drive, and industrial current paths without requiring the supply voltage to exceed the sensed bus voltage. The single-supply operating range extends down to 2.7 V, supporting low-voltage systems while the measurement input remains independent of the supply voltage.
Typical applications include motor-control current feedback, industrial power-supply monitoring, battery charge and discharge measurement, solenoid-driver diagnostics, LED-driver protection, and high-side or low-side current sensing in 12 V, 24 V, and 36 V systems. The device is particularly useful when the measured current can flow in either direction or when a compact PCB footprint is more important than using a discrete shunt network.
For implementation, keep the power-supply and ground connections compact, place input-side filtering close to the device when switching-node transients are present, and confirm that the common-mode and supply voltages remain within their rated limits. The output and reference network should be checked in system calibration to account for the analog input range of the ADC or controller.
This page combines the device specifications, manufacturer documentation, practical application guidance, and a parameter-focused comparison with same-family alternatives to support footprint-compatible design decisions and engineering reviews.
Alternativas directas para INA250A4PW — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
INA250A3PW
✅ Sustitución directaConsulte el precio
Ver hoja de datos →INA250A5PW
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
INA250A4PW Valores máximos y características eléctricas
| Product Type | Bidirectional precision current-sense amplifier |
| Tipo de salida | Voltage output |
| Integrated Shunt | Yes, precision integrated shunt resistor |
| Gain | 4000 V/V |
| Common-Mode Voltage Range | 0 V to 36 V |
| Supply Voltage Range | 2.7 V to 36 V |
| Maximum Supply Current | 300 uA |
| Bidirectional Measurement | Yes, positive and negative current |
| Current-Measurement Topology | Low-side or high-side current-shunt monitoring |
| External Reference Support | Yes |
| Rango de temperatura de funcionamiento | -40°C to +125°C |
| Encapsulado | 16-pin TSSOP |
| Number of Amplifiers | 1 circuit |
| Tipo de montaje | Surface mount |
Configuración de pines de INA250A4PW
| Pin 1 | IN+ — Positive current-sense input |
| Pin 2 | IN- — Negative current-sense input |
| Pin 3 | GND — Ground connection |
| Pin 4 | REF — Reference input |
| Pin 5 | OUT — Analog output |
| Pin 6 | VS — Positive supply voltage |
| Pin 7 | NC — Not connected |
| Pin 8 | NC — Not connected |
| Pin 9 | NC — Not connected |
| Pin 10 | NC — Not connected |
| Pin 11 | NC — Not connected |
| Pin 12 | NC — Not connected |
| Pin 13 | NC — Not connected |
| Pin 14 | NC — Not connected |
| Pin 15 | NC — Not connected |
| Pin 16 | NC — Not connected |
Aplicaciones típicas
INA250A4PW es adecuado para 6 aplicacións: 24V Industrial Current Monitoring, Bidirectional Motor Control, Battery Charge and Discharge Monitoring, Switching Power Supply Protection, LED Driver Current Regulation, Solenoid and Relay Load Diagnostics.
24V Industrial Current Monitoring
The INA250A4PW is well suited to high-side current monitoring in a 24 V industrial control bus because its common-mode input range extends from 0 V to 36 V and its measurement function is independent of the amplifier supply voltage. The 4000 V/V gain converts the voltage generated by the integrated precision shunt into a stronger analog signal, improving use of the available ADC range. Placing the device in the positive supply path also avoids disturbing the load ground. Designers should include filtering for inductive or switching transients and verify the maximum operating current against the integrated shunt rating before production release.
Recomendado
Bidirectional Motor Control
The INA250A4PW provides a practical way to monitor regenerative or bidirectional motor current because it supports measurement in both directions around an adjustable reference. Its 4000 V/V gain is useful when the controller must resolve relatively small shunt voltages without sacrificing signal amplitude. The device can be placed in the motor supply return or supply line while the controller observes the voltage proportional to current. In a regenerative drive, the external reference input can establish the offset used by the control system. Firmware and analog-front-end design must account for signal saturation during rapid acceleration, braking, and current reversal.
Recomendado
Battery Charge and Discharge Monitoring
The INA250A4PW can measure charge and discharge current in a battery system where current reverses between the charger and load. Its bidirectional operation allows one analog channel to distinguish both directions, while the integrated shunt removes the component and layout variation associated with a discrete precision resistor. The 0 V to 36 V common-mode range supports common single-cell and multi-cell industrial battery buses when the device supply and absolute transient limits are respected. The 4000 V/V gain improves resolution for low-current measurements, but system designers should confirm that the full charging-current range remains below the integrated shunt and amplifier limits.
Recomendado
Switching Power Supply Protection
The INA250A4PW can provide fast, proportional feedback for output-current monitoring in a switching power supply. Its 36 V common-mode capability suits industrial 12 V, 24 V, and 36 V power rails, while the high gain reduces the size of the signal that must be interpreted by the controller ADC. Monitoring the output or converter input through the integrated shunt enables overcurrent reporting, load-gating decisions, or fault signaling without a separate shunt amplifier. Because switching environments contain high-amplitude transients, the physical layout should minimize loop area and use the application filtering shown in the manufacturer documentation to prevent transient energy from reaching the current input.
Recomendado
LED Driver Current Regulation
The INA250A4PW is suitable for LED-driver regulation because its 4000 V/V gain creates a measurable feedback signal from the small voltage developed across the integrated shunt. A controller or ADC can compare that signal with a reference and adjust the switching stage to maintain the required LED current. The 0 V to 36 V common-mode range supports multiple lighting power rails, and bidirectional capability can assist fault detection if the LED current reverses unexpectedly. Layout is especially important in high-current LED systems: the shunt path should be compact, power and signal grounds should be routed carefully, and filtering must preserve useful bandwidth while rejecting switching-edge coupling.
Recomendado
Solenoid and Relay Load Diagnostics
The INA250A4PW can measure current through a solenoid, relay, or actuator so a controller can distinguish normal operation from a shorted or mechanically stalled load. The integrated shunt provides calibrated current sensing, and the 4000 V/V gain improves resolution when the measured current produces a relatively small differential voltage. Placing the monitor on the low side of the load simplifies ground referencing, while placing it on the high side preserves the load-ground topology when required. Designers should verify the transient response, reference configuration, and maximum load current, particularly for inductive loads that can produce voltage spikes when the switching element turns off.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para INA250A4PW — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | INA250A3PW | INA250A5PW |
|---|---|---|---|
| Package | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Gain | 4000 V/V | 3000 V/V | 5000 V/V |
| Supply Voltage Range | 2.7 V to 36 V | 2.7 V to 36 V | 2.7 V to 36 V |
| Common-Mode Voltage Range | 0 V to 36 V | 0 V to 36 V | 0 V to 36 V |
| Maximum Supply Current | 300 uA | 300 uA | 300 uA |
| Bidirectional Measurement | Yes | Yes | Yes |
| Integrated Shunt | Yes | Yes | Yes |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C |
| Output Type | Voltage output | Voltage output | Voltage output |
| External Reference Support | Yes | Yes | Yes |
Diferenciadores clave
- Higher gain than INA250A3PW while retaining the same package (frente a INA250A3PW)
- Lower gain than INA250A5PW with more ADC headroom (frente a INA250A5PW)
- Integrated precision shunt simplifies the measurement path (frente a INA250A3PW)
Notas de diseño
Route the IN+ and IN- connections as a compact, symmetric pair directly to the integrated shunt terminals. Keep the current path free of unnecessary copper length and avoid placing unrelated high-current return paths between the sense connections. Follow the package land pattern and current-flow geometry shown in the Texas Instruments INA250 datasheet. For high-di/dt loads, the shunt, amplifier inputs, and output reference should share a compact ground-return strategy to reduce offset errors.
Do not assume that the common-mode rating also defines the allowable supply voltage or transient level. The INA250A4PW supports a 0 V to 36 V common-mode range and a 2.7 V to 36 V supply, but absolute maximum ratings still govern fault conditions. Check switch-node overshoot, inductive spikes, and supply sequencing against those limits. Use the external reference pin only with a valid bias arrangement so the output does not exceed the input range of the ADC or controller.
Place any input-filter components close to the IN+ and IN- pins and select their values together with the required control-loop bandwidth. Excessive filtering can slow current measurements, while insufficient filtering can allow switching-edge coupling to appear in the output. The 4000 V/V gain also amplifies small differential signals, so sensor-path symmetry and a clean reference connection are important. Validate the complete analog path with the same power topology and load conditions used in production.
Información de cumplimiento
The manufacturer product page identifies the INA250 family, but the reviewed product information does not provide extractable compliance declarations for the exact INA250A4PW ordering code.