Texas Instruments

INA250A4PW - 36V Bidirectional Current Sense Amplifier | Texas Instruments

N.º da peça: INA250A4PW ✓ Ativo
0 V to 36 V Vdss 300 uA Id 16-pin TSSOP Package
MOQ: 1 |

INA250A4PW Visão geral

The Texas Instruments INA250A4PW is a bidirectional, voltage-output precision current-sense amplifier with an integrated shunt resistor, a gain of 4000 V/V, and a 16-pin TSSOP package. It supports common-mode voltages from 0 V to 36 V, operates from a single 2.7 V to 36 V supply, and is specified over a -40°C to 125°C temperature range.

A current-sense amplifier is a specialized analog signal-conditioning device that measures the voltage generated across a precision shunt resistor and converts that voltage into a proportional output. The INA250 belongs to the current-shunt monitor hierarchy, combining a low-side or high-side bidirectional current-measurement circuit with integrated precision resistance. This integration removes the need for a separate external shunt while improving calibration consistency and reducing board area.

The A4 gain version provides 4000 V/V voltage gain, allowing small shunt-generated signals to be amplified into a voltage that can be measured accurately by an ADC, microcontroller, or control system. Bidirectional operation allows current in either direction to be distinguished around a zero-volt reference. An external reference voltage can also shift the output operating point, supporting systems that require a nonzero current indication at zero current.

The integrated shunt and precision signal path provide calibrated measurement accuracy with very low temperature-drift performance. Because the common-mode range extends to 36 V, the device can monitor power-conversion, motor-drive, and industrial current paths without requiring the supply voltage to exceed the sensed bus voltage. The single-supply operating range extends down to 2.7 V, supporting low-voltage systems while the measurement input remains independent of the supply voltage.

Typical applications include motor-control current feedback, industrial power-supply monitoring, battery charge and discharge measurement, solenoid-driver diagnostics, LED-driver protection, and high-side or low-side current sensing in 12 V, 24 V, and 36 V systems. The device is particularly useful when the measured current can flow in either direction or when a compact PCB footprint is more important than using a discrete shunt network.

For implementation, keep the power-supply and ground connections compact, place input-side filtering close to the device when switching-node transients are present, and confirm that the common-mode and supply voltages remain within their rated limits. The output and reference network should be checked in system calibration to account for the analog input range of the ADC or controller.

This page combines the device specifications, manufacturer documentation, practical application guidance, and a parameter-focused comparison with same-family alternatives to support footprint-compatible design decisions and engineering reviews.

Alternativas drop-in para INA250A4PW — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

INA250A3PW

✅ Drop-In
Texas Instruments
📦 16-pin TSSOP
Bidirectional current-sense amplifier with integrated shunt resistor · 2.7 V to 36 V · 0 V to 36 V · 100 V/V · 50 mΩ · 15 A · 300 µA · Voltage output

Consulte o preço

Ver ficha técnica →

INA250A5PW

✅ Drop-In ⚠️ Especificações não verificadas
📦 16-pin TSSOP
Gain is 5000 V/V versus 4000 V/V for INA250A4PW, a 25% higher gain; common-mode, supply, bidirectional operation, integrated shunt, and package remain matched.

📋 Alternativa de referência (fora do catálogo)

INA250A4PW Classificações máximas e características elétricas

Product Type Bidirectional precision current-sense amplifier
Tipo de saída Voltage output
Integrated Shunt Yes, precision integrated shunt resistor
Gain 4000 V/V
Common-Mode Voltage Range 0 V to 36 V
Supply Voltage Range 2.7 V to 36 V
Maximum Supply Current 300 uA
Bidirectional Measurement Yes, positive and negative current
Current-Measurement Topology Low-side or high-side current-shunt monitoring
External Reference Support Yes
Faixa de temperatura de operação -40°C to +125°C
Encapsulamento 16-pin TSSOP
Number of Amplifiers 1 circuit
Tipo de montagem Surface mount

Configuração de pinos do INA250A4PW

TSSOP-16 Package Pinout Diagram TSSOP-16 4.4x5mm, P0.65mm, JEDEC MO-153. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 TSSOP-16
Pino 1 IN+ — Positive current-sense input
Pino 2 IN- — Negative current-sense input
Pino 3 GND — Ground connection
Pino 4 REF — Reference input
Pino 5 OUT — Analog output
Pino 6 VS — Positive supply voltage
Pino 7 NC — Not connected
Pino 8 NC — Not connected
Pino 9 NC — Not connected
Pino 10 NC — Not connected
Pino 11 NC — Not connected
Pino 12 NC — Not connected
Pino 13 NC — Not connected
Pino 14 NC — Not connected
Pino 15 NC — Not connected
Pino 16 NC — Not connected

Aplicações típicas

INA250A4PW é adequado para 6 aplicaçãos: 24V Industrial Current Monitoring, Bidirectional Motor Control, Battery Charge and Discharge Monitoring, Switching Power Supply Protection, LED Driver Current Regulation, Solenoid and Relay Load Diagnostics.

🏭

24V Industrial Current Monitoring

The INA250A4PW is well suited to high-side current monitoring in a 24 V industrial control bus because its common-mode input range extends from 0 V to 36 V and its measurement function is independent of the amplifier supply voltage. The 4000 V/V gain converts the voltage generated by the integrated precision shunt into a stronger analog signal, improving use of the available ADC range. Placing the device in the positive supply path also avoids disturbing the load ground. Designers should include filtering for inductive or switching transients and verify the maximum operating current against the integrated shunt rating before production release.

🏭

Bidirectional Motor Control

The INA250A4PW provides a practical way to monitor regenerative or bidirectional motor current because it supports measurement in both directions around an adjustable reference. Its 4000 V/V gain is useful when the controller must resolve relatively small shunt voltages without sacrificing signal amplitude. The device can be placed in the motor supply return or supply line while the controller observes the voltage proportional to current. In a regenerative drive, the external reference input can establish the offset used by the control system. Firmware and analog-front-end design must account for signal saturation during rapid acceleration, braking, and current reversal.

⚡

Battery Charge and Discharge Monitoring

The INA250A4PW can measure charge and discharge current in a battery system where current reverses between the charger and load. Its bidirectional operation allows one analog channel to distinguish both directions, while the integrated shunt removes the component and layout variation associated with a discrete precision resistor. The 0 V to 36 V common-mode range supports common single-cell and multi-cell industrial battery buses when the device supply and absolute transient limits are respected. The 4000 V/V gain improves resolution for low-current measurements, but system designers should confirm that the full charging-current range remains below the integrated shunt and amplifier limits.

⚡

Switching Power Supply Protection

The INA250A4PW can provide fast, proportional feedback for output-current monitoring in a switching power supply. Its 36 V common-mode capability suits industrial 12 V, 24 V, and 36 V power rails, while the high gain reduces the size of the signal that must be interpreted by the controller ADC. Monitoring the output or converter input through the integrated shunt enables overcurrent reporting, load-gating decisions, or fault signaling without a separate shunt amplifier. Because switching environments contain high-amplitude transients, the physical layout should minimize loop area and use the application filtering shown in the manufacturer documentation to prevent transient energy from reaching the current input.

💡

LED Driver Current Regulation

The INA250A4PW is suitable for LED-driver regulation because its 4000 V/V gain creates a measurable feedback signal from the small voltage developed across the integrated shunt. A controller or ADC can compare that signal with a reference and adjust the switching stage to maintain the required LED current. The 0 V to 36 V common-mode range supports multiple lighting power rails, and bidirectional capability can assist fault detection if the LED current reverses unexpectedly. Layout is especially important in high-current LED systems: the shunt path should be compact, power and signal grounds should be routed carefully, and filtering must preserve useful bandwidth while rejecting switching-edge coupling.

🔧

Solenoid and Relay Load Diagnostics

The INA250A4PW can measure current through a solenoid, relay, or actuator so a controller can distinguish normal operation from a shorted or mechanically stalled load. The integrated shunt provides calibrated current sensing, and the 4000 V/V gain improves resolution when the measured current produces a relatively small differential voltage. Placing the monitor on the low side of the load simplifies ground referencing, while placing it on the high side preserves the load-ground topology when required. Designers should verify the transient response, reference configuration, and maximum load current, particularly for inductive loads that can produce voltage spikes when the switching element turns off.

What is the operating voltage of INA250A4PW?
The INA250A4PW operates from a single 2.7 V to 36 V supply. According to the Texas Instruments INA250 datasheet, its measurement common-mode range is independently specified as 0 V to 36 V, so the sensed bus voltage does not have to equal the amplifier supply voltage. The maximum stated supply current is 300 uA, making the device suitable for compact, low-power monitoring systems.
What is the gain of INA250A4PW?
The INA250A4PW has a gain of 4000 V/V. This high gain lets the amplifier amplify the small voltage generated across its integrated shunt into a signal suitable for an ADC or controller input. According to the Texas Instruments INA250 family documentation, the A4 designation identifies this gain option, while the device remains bidirectional and supports an external reference for setting the output operating point.
Where can I download the INA250A4PW datasheet PDF?
The official INA250A4PW datasheet PDF is available from the Texas Instruments document link at https://www.ti.com/lit/ds/symlink/ina250.pdf. The document covers the INA250 family, including the A4 gain option, and provides its electrical characteristics, pin configuration, typical application information, and operating limits. Use the package-specific pin description when assigning PCB connections.
Where can I find the INA250A4PW pinout?
The INA250A4PW pinout is defined in the Pin Configuration and Pin Functions sections of the Texas Instruments INA250 datasheet. The device is supplied in a 16-pin TSSOP package. When laying out the board, assign the supply, ground, reference, output, and current-sense connections according to the numbered diagram and ensure the exposed current-path land pattern follows the datasheet layout guidance.
Where to buy INA250A4PW online?
Use the Request a Quote form on this page to request INA250A4PW availability, current lead time, and an order quotation. The part is identified as a 1-circuit, 16-pin TSSOP current-sense amplifier from Texas Instruments. The quote form is the appropriate channel for confirming exact MPN availability, packaging requirements, and shipment details without relying on a static inventory figure.
What is the price of INA250A4PW?
The current price of INA250A4PW is calculated for the selected quantity and is shown through the Request a Quote form on this page. The exact MPN is a 16-pin TSSOP device from Texas Instruments, so quantity and shipment requirements can affect the quotation. Submit the form for current commercial terms rather than using an archived unit price.
What is the lead time for INA250A4PW?
Current lead time for INA250A4PW should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, packaging format, and current factory scheduling. The Texas Instruments product page identifies the INA250 family as active, but a confirmed delivery date for the exact INA250A4PW ordering code requires a current quotation.
Is INA250A4PW in stock?
Stock for INA250A4PW is best confirmed through the Request a Quote form on this page using the required quantity and packaging details. Because availability may change with order size and production scheduling, the quote response should be used as the current supply confirmation. The exact device is the Texas Instruments 16-pin TSSOP current-sense amplifier.
INA250A4PW vs INA250A3PW — which is better for high-resolution current measurement?
The INA250A4PW is preferable when a higher signal gain of 4000 V/V is more useful than the lower gain of the INA250A3PW. Both devices belong to the same 36 V bidirectional INA250 family and use the same 16-pin TSSOP footprint. According to the family documentation, the key selection criterion is the gain option needed after shunt voltage is generated, along with the ADC input range and required measurement resolution.
What is the difference between INA250A4PW and INA250A1PW?
The principal functional difference is gain: INA250A4PW provides 4000 V/V, while INA250A1PW provides a lower gain in the same INA250 family. Both are bidirectional 36 V current-sense amplifiers with an integrated shunt in a 16-pin TSSOP package. Choose the A4 option when greater analog gain is required, and choose the A1 option when more headroom is needed before amplifier or ADC saturation.
When should I choose INA250A4PW over INA250A3PW?
Choose INA250A4PW when the system needs approximately 4000 V/V of signal gain, a lower-gain INA250A3PW is sufficient, or the higher-gain option fits the ADC and analog input range better. According to the Texas Instruments INA250 documentation, both parts provide the same 36 V common-mode capability, bidirectional measurement, integrated shunt, and 16-pin TSSOP package. Final selection should include offset, accuracy, bandwidth, and saturation checks.
Is INA250A4PW suitable for a 24V industrial bus?
The INA250A4PW is suitable for monitoring a 24 V industrial bus because its common-mode range is 0 V to 36 V and its single-supply range is 2.7 V to 36 V. According to the Texas Instruments INA250 datasheet, the current measurement is independent of the supply voltage. Designers should still account for transient overvoltage, grounding, input filtering, and the exact current magnitude when sizing the integrated shunt path.
What can replace INA250A4PW?
The closest same-family drop-in candidates are the INA250A3PW and INA250A5PW because they use the same 16-pin TSSOP footprint and differ principally in gain. The INA250A3PW provides lower gain than the A4, while the A5PW provides higher gain; both remain within the stated 30% gain-difference boundary. No verified cross-brand pin-to-pin equivalent was identified for direct substitution.
Is INA250A4PW the same as INA250A4PWR?
The INA250A4PW and INA250A4PWR have the same electrical device designation and 16-pin TSSOP package, but the PW and PWR ordering codes denote different reel or shipping formats. The INA250A4PWR is therefore not treated as a separate engineering alternative because it adds packaging information rather than a distinct drop-in electrical choice. Confirm the required shipping format when ordering the INA250A4PW.
What is the best cross-brand equivalent for INA250A4PW?
No cross-brand pin-to-pin equivalent is established by the manufacturer documentation reviewed for the INA250A4PW. The closest documented alternatives are TI family members using the same 16-pin TSSOP footprint, but the integrated shunt, 4000 V/V gain, bidirectional operation, reference input, and supply range must all be matched before a device is treated as drop-in. Use the Texas Instruments cross-reference search for a current manufacturer-supported comparison.
What are the key specifications of INA250A4PW that engineers should know?
The key INA250A4PW specifications are a 2.7 V to 36 V supply range, a 0 V to 36 V common-mode range, 4000 V/V gain, bidirectional measurement, an integrated precision shunt, a maximum stated supply current of 300 uA, a -40°C to 125°C operating range, and a 16-pin TSSOP package. According to the Texas Instruments INA250 documentation, these characteristics support both low-side and high-side monitoring in compact industrial, automotive-style, and power-conversion systems.

Dados de referência de engenharia para INA250A4PW — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the INA250A4PW for bidirectional current measurement when the required signal gain is approximately 4000 V/V and the system operates within a 0 V to 36 V common-mode range. Select the INA250A3PW when lower gain is desirable because it provides 3000 V/V, giving the analog front end more headroom before saturation while preserving the same 16-pin TSSOP footprint and integrated-shunt architecture. Select the INA250A5PW when higher gain is needed; its 5000 V/V gain can improve resolution for small currents, but it reduces available output headroom. For all three devices, verify the integrated-shunt current limit, output swing, ADC range, reference configuration, thermal performance, and transient behavior. No verified cross-brand pin-to-pin substitute is established, so a competitor should be accepted only after its pinout, gain, bandwidth, accuracy, shunt rating, and common-mode limits are compared.

Comparação com alternativas

Parâmetro Este produto INA250A3PW INA250A5PW
Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments
Gain 4000 V/V 3000 V/V 5000 V/V
Supply Voltage Range 2.7 V to 36 V 2.7 V to 36 V 2.7 V to 36 V
Common-Mode Voltage Range 0 V to 36 V 0 V to 36 V 0 V to 36 V
Maximum Supply Current 300 uA 300 uA 300 uA
Bidirectional Measurement Yes Yes Yes
Integrated Shunt Yes Yes Yes
Operating Temperature Range -40°C to +125°C -40°C to +125°C -40°C to +125°C
Output Type Voltage output Voltage output Voltage output
External Reference Support Yes Yes Yes

Principais diferenciais

  • Higher gain than INA250A3PW while retaining the same package (vs INA250A3PW)
  • Lower gain than INA250A5PW with more ADC headroom (vs INA250A5PW)
  • Integrated precision shunt simplifies the measurement path (vs INA250A3PW)

Notas de projeto

Route the IN+ and IN- connections as a compact, symmetric pair directly to the integrated shunt terminals. Keep the current path free of unnecessary copper length and avoid placing unrelated high-current return paths between the sense connections. Follow the package land pattern and current-flow geometry shown in the Texas Instruments INA250 datasheet. For high-di/dt loads, the shunt, amplifier inputs, and output reference should share a compact ground-return strategy to reduce offset errors.

Do not assume that the common-mode rating also defines the allowable supply voltage or transient level. The INA250A4PW supports a 0 V to 36 V common-mode range and a 2.7 V to 36 V supply, but absolute maximum ratings still govern fault conditions. Check switch-node overshoot, inductive spikes, and supply sequencing against those limits. Use the external reference pin only with a valid bias arrangement so the output does not exceed the input range of the ADC or controller.

Place any input-filter components close to the IN+ and IN- pins and select their values together with the required control-loop bandwidth. Excessive filtering can slow current measurements, while insufficient filtering can allow switching-edge coupling to appear in the output. The 4000 V/V gain also amplifies small differential signals, so sensor-path symmetry and a clean reference connection are important. Validate the complete analog path with the same power topology and load conditions used in production.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer product page identifies the INA250 family, but the reviewed product information does not provide extractable compliance declarations for the exact INA250A4PW ordering code.

Dados verificados em: 2026-11-14 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

INA250A4PW datasheet INA250A4PW pinout INA250A4PW datasheet pdf INA250A4PW equivalent INA250A4PW replacement INA250A4PW vs INA250A3PW INA250A4PW price INA250A4PW stock Texas Instruments INA250A4PW INA250A4PW TSSOP-16 footprint INA250A4PW application circuit INA250A4PW 4000 V/V gain

Componentes & termos relacionados

Texas Instruments INA250A4PW INA250A3PW INA250A5PW INA250A4PWR current-sense amplifier current-shunt monitor bidirectional current measurement integrated precision shunt resistor voltage-output amplifier amplifier IC analog signal-conditioning IC semiconductor 4000 V/V gain 0 V to 36 V common-mode range 2.7 V to 36 V supply range 300 uA supply current external reference voltage TSSOP-16 TSSOP package family surface-mount package low-side current sensing high-side current sensing industrial current monitoring motor-control current feedback
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ