IPQ8072 - Quad-core Wi-Fi 6 SoC, 2.2GHz, Networking Pro 1200 | Qualcomm
N.º de pieza: IPQ8072 ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $38.5 | $38,50 |
| 10 | $35.2 | $352,00 |
| 100 | $31.8 | $3.180,00 |
| 500 | $28.4 | $14.200,00 |
| 1.000 | $25.6 | $25.600,00 |
IPQ8072 Descripción general
A Wi-Fi 6 SoC is a system-on-chip that consolidates the application processor, Wi-Fi baseband/MAC, networking offloads, and crypto engines into a single die, replacing what was historically a CPU-plus-discrete-Wi-Fi-chipset architecture. Within the platform hierarchy, the IPQ8072 sits at the premium tier of Qualcomm's Networking Pro family, between the mid-range IPQ6018/IPQ6024 series and the Wi-Fi 7 flagship IPQ9574. It is intended for carrier-grade CPE, enterprise access points, and retail tri-band/quad-band routers that demand deterministic MU-MIMO and OFDMA scheduling.
Key differentiating features include 12-stream 8x8 + 4x4 MU-MIMO with OFDMA, hardware-accelerated encryption (IPSec/L2TP/SSL/TLS) via dedicated engines, a quad-core A53 CPU at 2.2 GHz for control plane and SDK extensibility, support for up to 2.5 Gbps Ethernet (HSGMII/PSGMII), and integrated RF/PHY for simultaneous tri-band operation. The 14 nm process node and 772-ball FCBGA package enable compact router designs with reduced BOM.
Architecturally, the IPQ8072 pairs a quad-core CPU cluster with hardware packet processing accelerators, offloading NAT, QoS, and crypto from the CPU to maintain wire-speed throughput. The integrated Wi-Fi subsystem supports 1024-QAM, MU-MIMO uplink/downlink, OFDMA, BSS coloring, target wake time (TWT), and dynamic frequency selection (DFS) for global regulatory compliance. The Networking Pro 1200 platform framing also brings platform-level features like Qualcomm's Wi-Fi SON (Self-Organizing Network) for mesh.
Typical applications include Wi-Fi 6 tri-band/quad-band consumer routers, carrier-grade gateways, enterprise access points, mesh nodes, and small-business firewalls. The wide temperature range and carrier-grade SDK make it suitable for industrial deployments and outdoor CPE.
When designing with IPQ8072, allocate at least 6 layers of PCB stack-up with continuous ground planes beneath the FCBGA, follow Qualcomm's reference thermal solution (heat spreader plus 1 oz copper pour), and validate PCIe/NSS pin assignments against the QSDK BSP for your chosen QCN radio companion. Use M.2 or mPCIe slots to attach QCN9074 5 GHz or 6 GHz radio cards.
This page synthesizes distributor stock, package-level drop-in alternatives, and reference design considerations beyond the raw datasheet - including the IPQ8072A stepping upgrade and the sibling IPQ8074 (higher-end) / IPQ6018 (mid-range) alternatives.
Alternativas directas para IPQ8072 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
IPQ8072A-0-772FCBGA-MT-00-0
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
IPQ-8072-0-772FCBGA-TR-02-0
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
IPQ-8072-0-772FCBGA-MT-02-0
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
IPQ8074
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
IPQ8072 Valores máximos y características eléctricas
| Platform | Qualcomm Networking Pro 1200 |
| CPU Architecture | Quad-core 64-bit ARM Cortex-A53 |
| CPU Clock Speed | Up to 2.2 GHz |
| Process Node | 14 nm |
| Wi-Fi Standard | 802.11ax (Wi-Fi 6) |
| Spatial Streams | Up to 12 streams (8x8 + 4x4) |
| Aggregate PHY Rate | Up to 5.4 Gbps |
| Frequency Bands | 2.4 GHz / 5 GHz / 6 GHz (tri-band with companion radio) |
| MU-MIMO | 8x8 + 4x4 uplink/downlink |
| Modulation | 1024-QAM, OFDMA, BSS coloring |
| Ethernet | Up to 2.5 Gbps (HSGMII/PSGMII) |
| Hardware Crypto Engines | IPSec / L2TP / SSL / TLS acceleration |
| Companion Radio | QCN9074 / QCN9024 (external via PCIe/M.2) |
| Encapsulado | 772-ball FCBGA |
| Estado RoHS | Compliant |
Guía de configuración de pines de IPQ8072 772-ball fcbga
Configuración de pines para IPQ8072 (encapsulado 772-ball fcbga). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para IPQ8072.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
IPQ8072 es adecuado para 6 aplicacións: Wi-Fi 6 Tri-Band Consumer Router, Carrier-Grade Wi-Fi 6 Gateway / ONT, Enterprise Wi-Fi 6 Access Point, Wi-Fi 6 Mesh Node / Satellite, Small-Business UTM Firewall / SD-WAN Edge, Industrial Wi-Fi 6 Outdoor CPE.
Wi-Fi 6 Tri-Band Consumer Router
The IPQ8072's 12 spatial streams across 2.4/5/6 GHz bands (with QCN9074 companion radio) and 5.4 Gbps aggregate PHY rate make it ideal for flagship consumer tri-band routers that require simultaneous 8x8 + 4x4 MU-MIMO with OFDMA for high-density households. Placed at the heart of the router motherboard with DDR3L memory, 2.5 GbE WAN port via HSGMII, and an M.2 slot for the QCN9074 5 GHz or 6 GHz radio card. Unlike mid-range SoCs, IPQ8072 sustains full 1024-QAM throughput across all bands with hardware-accelerated packet processing.
Recomendado
Carrier-Grade Wi-Fi 6 Gateway / ONT
The IPQ8072's hardware crypto engines (IPSec, L2TP, SSL, TLS) and 2.2 GHz quad-core A53 CPU deliver carrier-grade throughput for xPON, xGS-PON, and 10G-PON ONTs with integrated Wi-Fi 6. Its support for up to 2.5 Gbps Ethernet (HSGMII/PSGMII) interfaces directly to PON MAC SoCs without bottlenecks. Compared to mid-range IPQ6018 designs, IPQ8072 sustains full TR-069 and TR-181 management plane traffic without compromising Wi-Fi throughput, even under simultaneous VPN and parental-control load.
Recomendado
Enterprise Wi-Fi 6 Access Point
The IPQ8072's Wi-Fi SON (Self-Organizing Network) support, DFS, and 12 spatial streams make it the SoC of choice for enterprise-grade tri-band APs with seamless roaming, band steering, and air-time fairness. The quad-core A53 CPU at 2.2 GHz provides headroom for RADIUS/TLS termination, captive portal hosting, and DPI firewalls without external co-processors. Placed alongside a QCN9074 radio and 2-4 port GbE switch with PoE-PD support; unlike consumer routers, enterprise APs benefit from the IPQ8072's ability to maintain 4x4 + 4x4 MU-MIMO across two bands simultaneously.
Recomendado
Wi-Fi 6 Mesh Node / Satellite
The IPQ8072 powers Wi-Fi SON mesh satellites with dedicated backhaul radios (5 GHz 4x4) and concurrent 2.4/5/6 GHz service radios. The SoC's hardware packet acceleration maintains throughput across mesh hops without CPU saturation, while 1024-QAM and OFDMA preserve spectral efficiency at long range. Unlike entry-level mesh SoCs, IPQ8072 nodes support >8 spatial streams for backhaul plus service, eliminating the throughput loss typical in dual-radio mesh designs.
Recomendado
Small-Business UTM Firewall / SD-WAN Edge
The IPQ8072's dedicated hardware crypto engines accelerate IPSec and SSL VPNs at line rate, making it a strong fit for small-business UTM firewalls and SD-WAN edge appliances. The 2.2 GHz quad-core A53 handles DPI, web filtering, and QoS control plane without sacrificing VPN wire-speed. Compared to IPQ6018-based designs, IPQ8072 delivers roughly 1.5x encrypted throughput, and unlike consumer SoCs, it supports multiple concurrent WAN tunnels with hardware QoS scheduling.
Recomendado
Industrial Wi-Fi 6 Outdoor CPE
The IPQ8072's wide operating temperature range, 14 nm process efficiency, and rugged 772-ball FCBGA package enable industrial-grade outdoor CPE designs for manufacturing, mining, and smart-city deployments. The SoC integrates DFS and dynamic band-steering for noisy industrial RF environments. Industrial reference designs pair IPQ8072 with IP67-rated QCN9074 radios for weatherproof APs; unlike consumer routers, IPQ8072 outdoor designs sustain 24/7 operation across -40°C to +85°C ambient.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para IPQ8072 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | IPQ8072A-0-772FCBGA-MT-00-0 | IPQ-8072-0-772FCBGA-TR-02-0 | IPQ-8072-0-772FCBGA-MT-02-0 | IPQ8074 |
|---|---|---|---|---|---|
| Brand | Qualcomm | Qualcomm | Qualcomm | Qualcomm | Qualcomm |
| Package | 772-ball FCBGA | 772-ball FCBGA - same | 772-ball FCBGA - same | 772-ball FCBGA - same | 772-ball FCBGA - same |
| CPU Architecture | Quad-core Cortex-A53 | Quad-core Cortex-A53 | Quad-core Cortex-A53 | Quad-core Cortex-A53 | Quad-core Cortex-A53 |
| CPU Clock Speed | Up to 2.2 GHz | Up to 2.2 GHz | Up to 2.2 GHz | Up to 2.2 GHz | Up to 2.2 GHz |
| Spatial Streams | Up to 12 (8x8 + 4x4) | Up to 12 (8x8 + 4x4) | Up to 12 (8x8 + 4x4) | Up to 12 (8x8 + 4x4) | Up to 16 (+33%) |
| Aggregate PHY Rate | Up to 5.4 Gbps | Up to 5.4 Gbps | Up to 5.4 Gbps | Up to 5.4 Gbps | Up to 7.2 Gbps |
| Wi-Fi Standard | 802.11ax (Wi-Fi 6) | 802.11ax (Wi-Fi 6) | 802.11ax (Wi-Fi 6) | 802.11ax (Wi-Fi 6) | 802.11ax (Wi-Fi 6) |
| Hardware Crypto Acceleration | IPSec/L2TP/SSL/TLS | IPSec/L2TP/SSL/TLS | IPSec/L2TP/SSL/TLS | IPSec/L2TP/SSL/TLS | IPSec/L2TP/SSL/TLS + enhanced |
Diferenciadores clave
- Latest stepping A revision (frente a IPQ8072A-0-772FCBGA-MT-00-0)
- Higher scalability with same package (frente a IPQ8074)
- Tri-band Wi-Fi 6 with 6 GHz readiness (frente a IPQ6018)
Notas de diseño
Estimated: The IPQ8072 772-ball FCBGA at full Wi-Fi load (12 streams, 2.2 GHz CPU, encryption acceleration active) dissipates approximately 6-9 W. A heat spreader is mandatory; pair it with at least 4 square inches of 1 oz copper ground pour on top and inner PCB layers. Without adequate thermal relief, junction temperature can climb beyond 105°C during sustained mesh-backhaul operation, triggering thermal throttling. Industrial designs must derate to 8 streams at +85°C ambient.
The 772-ball FCBGA requires at least 6 PCB layers with continuous ground planes beneath the package to control impedance for DDR3L and PCIe traces. Microvia-in-pad construction is strongly recommended for the inner balls; use ENIG or ENEPIG surface finish for reliable solder joint formation. Place decoupling capacitors within 1 mm of each power pin, and route the QCN9074 PCIe Gen 2 lanes as 85 ohm differential with length matching to within 150 mil.
Do not assume the IPQ8072A stepping is firmware-compatible without verifying the QSDK BSP version - some A-stepping parts require BSP 2.x or later for proper 6 GHz operation. Watch out for counterfeit or remarked IPQ8072 units on open-market brokers; always validate the laser-etched date code against Qualcomm's authorized distributor list. The 772-ball FCBGA is not reworkable by hand; production failures require BGA rework stations and X-ray inspection.
Route DDR3L traces to the IPQ8072 with controlled impedance of 50 ohm single-ended (100 ohm differential for clock/address). Keep DDR traces on internal stripline layers with reference ground planes both above and below. PCIe Gen 2 lanes to the QCN9074 radio must be length-matched within 5 ps of each other to avoid eye-diagram degradation. Reference the Qualcomm QSDK hardware design guide for exact via pattern recommendations around the FCBGA break-out region.
Información de cumplimiento
RoHS compliant per Qualcomm Networking Pro 1200 platform documentation. Not AEC-Q100 qualified - this is a commercial/industrial-grade networking SoC, not an automotive MCU.
