Renesas Electronics

ISL83699IR - Low-Voltage Quad SPDT Analog Switch | Renesas

N.º de pieza: ISL83699IR ✓ Activo
1.65 V to 3.6 V Vdss 0.26 ohm Rds(on) 16-QFN, 3 x 3 mm Package
MOQ: 1 |

ISL83699IR Descripción general

Renesas ISL83699IR is a low-voltage, ultra-low on-resistance, bidirectional quad SPDT analog switch designed for single-supply operation from 1.65 V to 3.6 V. The device provides four 2:1 switch circuits in a 16-QFN package measuring 3 x 3 mm, making it suitable for compact, battery-powered equipment and low-voltage signal-routing systems.

An analog switch is a semiconductor device that connects or disconnects analog signal paths under digital control. A quad SPDT configuration provides four independent selectors, each able to choose between two signal paths. This makes the ISL83699IR useful in applications such as battery-powered instrumentation, mobile equipment, communication interfaces, and test systems where low-voltage logic compatibility, fast switching, and low on-resistance are important.

Key features include an on-resistance of 0.26 ohm, switching times of tON = 10 ns and tOFF = 7 ns, and compatibility with 1.8 V digital logic when operated from a single 3 V supply. The low-voltage operating range allows the switch to operate directly from energy-efficient system rails. The 3 x 3 mm 16-QFN package reduces board area while supporting dense analog and mixed-signal layouts.

The switch is bidirectional, so signal paths can be routed in either direction. Bidirectional operation is valuable when a shared line must connect a peripheral, test point, or alternate signal source without requiring a directional multiplexer. The 2:1 architecture supports source selection, signal swapping, isolation, and bus-sharing functions in compact systems.

Typical applications include mobile-phone accessory routing, portable measurement equipment, battery-powered sensor interfaces, communication modules, and general-purpose analog signal routing. Designers should confirm that signal amplitudes remain within the device’s operating limits and that control logic levels meet the datasheet requirements. Adequate input and output decoupling, short analog traces, and careful grounding help preserve switching performance.

The principal design trade-off is the very low supply-voltage range. The ISL83699IR is optimized for 1.65 V to 3.6 V systems rather than higher-voltage rails. Designers using the same package in another design should verify control thresholds, signal swing, switching timing, and the exposed-pad connection before committing to a footprint.

This product page combines the manufacturer’s operating limits and switching characteristics with package information, application guidance, comparison data, and practical design notes. It is intended to accelerate engineering selection while keeping the final circuit decisions tied to the manufacturer datasheet and board-level requirements.

Alternativas directas para ISL83699IR — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

ISL83699IR-T

✅ Sustitución directa
📦 16-QFN (3 x 3 mm)
Ordering suffix differs by 0%, with the same 1.65 V to 3.6 V supply, quad SPDT architecture, and 16-QFN footprint

📋 Alternativa de referencia (no en el catálogo)

ISL83699IR Valores máximos y características eléctricas

Device Type Quad SPDT bidirectional analog switch
Number of Circuits 4 circuits
Switch Configuration 2:1 SPST per circuit
Supply Voltage Range 1.65 V to 3.6 V
On-Resistance 0.26 ohm
Catalog On-Resistance 450 mOhm
Turn-On Time 10 ns
Turn-Off Time 7 ns
Logic Compatibility 1.8 V compatible with a single 3 V supply
Signal Direction Bidirectional
Encapsulado 16-QFN, 3 x 3 mm
Tipo de montaje Surface mount
Número de pines 16 pins
Supplier Eligibility Support is limited to customers who have already adopted these products

Guía de configuración de pines de ISL83699IR 16-qfn, 3 x 3 mm

Configuración de pines para ISL83699IR (encapsulado 16-qfn, 3 x 3 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 16-qfn, 3 x 3 mm para ISL83699IR

No hay datos detallados de patillaje disponibles para ISL83699IR.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

ISL83699IR es adecuado para 6 aplicacións: Battery-Powered Portable Equipment, Mobile Radio Signal Routing, Portable Measurement and Test Systems, Battery Sensor Interface Routing, Communications Line Multiplexing, Low-Voltage Audio and Control Routing.

📱

Battery-Powered Portable Equipment

The ISL83699IR fits battery-powered equipment that must route several low-voltage signals within a compact board. Its 1.65 V to 3.6 V single-supply range allows direct operation from common portable-system rails, while the 0.26 ohm on-resistance limits signal-path loss. Four independent 2:1 selectors provide flexible routing without requiring four separate packages. The 16-QFN 3 x 3 mm package also preserves PCB area for display, radio, and sensing subsystems.

🌐

Mobile Radio Signal Routing

The ISL83699IR is suitable for switching low-frequency or baseband paths in mobile communication hardware. Bidirectional conduction lets a shared node connect to more than one peripheral without constraining signal direction, while tON = 10 ns and tOFF = 7 ns provide fast source selection. The 1.8 V-compatible control inputs support integration with 3 V logic, and the small 3 x 3 mm footprint reduces routing congestion in densely populated radio modules.

🔧

Portable Measurement and Test Systems

Portable test equipment can use the ISL83699IR to connect a common analog node to one of two signal sources. The fast 10 ns turn-on and 7 ns turn-off transitions support controlled measurement setup, while the low 0.26 ohm on-resistance helps preserve signal integrity at low supply voltages. Its four-channel quad SPDT organization allows multiple selections to be routed through one compact 16-QFN footprint, reducing component count on crowded instrument boards.

🧩

Battery Sensor Interface Routing

The ISL83699IR can route sensor outputs or excitation paths in compact battery-operated sensing equipment. Bidirectional switching supports designs where a line must move signals between a sensor, test circuit, and host controller. Operation from 1.65 V to 3.6 V aligns with energy-efficient sensor nodes, and the 450 mOhm catalog on-resistance provides a low-impedance path. Firmware should avoid asserting conflicting routes simultaneously and should honor power-up control states.

🌐

Communications Line Multiplexing

The quad 2:1 structure of the ISL83699IR supports line multiplexing where two signal sources must share a communications path. Its low on-resistance minimizes loss in the selected route, and 10 ns/7 ns switching speeds support high-rate control of alternate paths. The bidirectional architecture is useful for shared buses and configurable peripheral links. Designers should verify bandwidth, off-state isolation, and allowable signal swing in the manufacturer datasheet for the specific line standard.

🎧

Low-Voltage Audio and Control Routing

The ISL83699IR can select between low-voltage audio, control, or auxiliary paths in compact multi-function equipment. Its 0.26 ohm on-resistance is useful when switching low-impedance sources, while bidirectional operation permits either an input or output role. The 16-QFN package supports dense layouts where analog routing area is constrained. Check the allowable analog signal range, off-state leakage, and distortion-related characteristics before using it in precision audio paths.

What is the ISL83699IR?
The ISL83699IR is a Renesas quad SPDT bidirectional analog switch with four 2:1 switch circuits in a 16-QFN package. According to the Renesas product page, it operates from a single 1.65 V to 3.6 V supply, has an on-resistance of 0.26 ohm, and supports fast switching with tON = 10 ns and tOFF = 7 ns. It is intended for low-voltage systems requiring compact analog signal routing.
What is the operating voltage of ISL83699IR?
The ISL83699IR operates from a single supply of 1.65 V to 3.6 V. According to the Renesas product page, the low-voltage range is designed for compact battery-powered and portable equipment. The device also accepts 1.8 V-compatible digital control logic when powered from 3 V. System designers should not apply this part to supply rails above 3.6 V without using a separately rated interface or switch.
How fast does the ISL83699IR switch?
The ISL83699IR has a turn-on time of 10 ns and a turn-off time of 7 ns. These values are identified by Renesas as typical switching characteristics for the low on-resistance, low-voltage quad SPDT device. The fast transition times suit signal routing in portable and communication equipment where the source selection must respond quickly without adding substantial path delay.
What is the on-resistance of ISL83699IR?
The Renesas product page identifies a typical on-resistance of 0.26 ohm for the ISL83699IR. A distributor product listing also identifies the device as a 450 mOhm 2:1 analog switch. When planning a signal path, use the manufacturer datasheet value appropriate to the specified supply voltage and operating conditions, and include the switch resistance when calculating attenuation or power loss.
Where can I download the ISL83699IR datasheet PDF?
The ISL83699IR datasheet can be located through the Renesas ISL83699 product page linked on this page. The manufacturer documentation is the controlling reference for the 16-QFN pin arrangement, electrical characteristics, operating limits, and recommended application circuits. A PDF copy is also indexed by Datasheets.com under the ISL83699IR-T family documentation. Use the manufacturer version for design sign-off.
Where is the ISL83699IR pinout?
The ISL83699IR pinout is defined by its 16-QFN package and the Renesas datasheet. The package is a compact 3 x 3 mm surface-mount QFN with 16 numbered terminals and an exposed thermal pad. Before assigning PCB tracks, use the pin-description table and package drawing in the manufacturer datasheet to distinguish supply pins, control inputs, common terminals, and independent switch terminals.
Is the ISL83699IR suitable for battery-powered equipment?
Yes, the ISL83699IR is explicitly targeted at battery-powered equipment. According to the Renesas product page, its 1.65 V to 3.6 V single-supply range, 0.26 ohm on-resistance, and 10 ns turn-on time suit compact portable systems. The device can route low-voltage signals without requiring a higher-voltage analog switch, provided the selected signal and control levels remain within the datasheet limits.
Where can I buy ISL83699IR online?
The ISL83699IR can be requested through the “Request a Quote” form on this page. The form is the appropriate route for current availability, quantity requirements, lead time, and shipment planning. Renesas states that support is limited to customers who have already adopted the product, so buyers should confirm ongoing support and lifecycle expectations before introducing the device into a new design.
What is the price of ISL83699IR?
Current pricing for the ISL83699IR should be obtained through the “Request a Quote” form on this page. The form can incorporate the required quantity, package format, and delivery plan into the request. Because pricing and inventory can change, a request provides a more reliable commercial response than a static price statement. No price is asserted on this page.
What is the lead time for ISL83699IR?
The current lead time for the ISL83699IR should be confirmed through the “Request a Quote” form on this page. Lead time can depend on order quantity, package format, and the support status of the product. Renesas states that support is limited to customers who have already adopted these products. Include the planned production quantity and required delivery date so the commercial response can reflect the actual build schedule.
Is ISL83699IR in stock?
Current ISL83699IR stock status should be requested through the “Request a Quote” form on this page. The manufacturer identifies the product as one for which support is limited to customers that have already adopted it, making lifecycle confirmation especially important for new designs. Submit the required quantity and package format with the request so XAIPART can provide an availability response appropriate to the order.
What can replace the ISL83699IR?
The ISL83699IR-T is the directly identified same-family option with the same Renesas ISL83699 device description and 16-QFN 3 x 3 mm package. According to the Renesas and distributor product information, it retains the 1.65 V to 3.6 V supply range and the same quad SPDT architecture. Its package-ordering suffix must still be checked against the required assembly and shipping format before substitution.
Is ISL83699IR-T a drop-in replacement for ISL83699IR?
ISL83699IR-T is a qualified same-family drop-in candidate because the Renesas pages identify the same electrical device and 16-QFN 3 x 3 mm package. Its ordering code differs from ISL83699IR, so the relevant difference is the ordering or packaging designation rather than a change in the quoted operating range or switch architecture. Confirm the manufacturer ordering information and tape-and-reel requirements before approval.
What is the best Renesas equivalent for ISL83699IR?
ISL83699IR-T is the best identified Renesas equivalent because it is presented as the same ISL83699 low-on-resistance, low-voltage quad SPDT device in the same 16-QFN 3 x 3 mm package. The identified electrical characteristics remain 1.65 V to 3.6 V operation, 0.26 ohm on-resistance, and 10 ns/7 ns switching times. Review the ordering-information table to confirm the correct suffix for production.
When should I choose the ISL83699IR over another quad SPDT switch?
Choose the ISL83699IR when the design needs four independently controlled 2:1 routes, a 1.65 V to 3.6 V single supply, bidirectional signal flow, and compact 3 x 3 mm placement. Its 0.26 ohm on-resistance and 10 ns turn-on time are useful for low-voltage portable systems. If the application uses a higher supply voltage, different logic thresholds, or another switch configuration, select a device rated for those requirements instead.

Datos de referencia de ingeniería para ISL83699IR — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the ISL83699IR when a compact, low-voltage design needs four independent 2:1 analog routes, bidirectional conduction, and fast switching. Its 1.65 V to 3.6 V supply range, 0.26 ohm stated on-resistance, and 16-QFN 3 x 3 mm package are particularly suitable for portable, battery-powered, communication, and measurement equipment. ISL83699IR-T is the identified same-family drop-in candidate when its ordering suffix corresponds to the required production and shipping format; its electrical and package characteristics are unchanged. The shared 16-QFN footprint allows PCB reuse, but the exposed-pad connection, control states, analog signal limits, and supply requirements remain design-review items. Do not choose either ordering code for a system whose supply exceeds 3.6 V or whose interface requires different switch counts, logic thresholds, or signal ratings.

Comparación con alternativas

Parámetro Este producto ISL83699IR-T
Brand Renesas Electronics Renesas Electronics
Package 16-QFN (3 x 3 mm) 16-QFN (3 x 3 mm) - same
Device Type Quad SPDT bidirectional analog switch Quad SPDT bidirectional analog switch
Number of Circuits 4 circuits 4 circuits
Supply Voltage Range 1.65 V to 3.6 V 1.65 V to 3.6 V
On-Resistance 0.26 ohm 0.26 ohm
Turn-On Time 10 ns 10 ns
Turn-Off Time 7 ns 7 ns
Logic Compatibility 1.8 V compatible with a single 3 V supply 1.8 V compatible with a single 3 V supply
Signal Direction Bidirectional Bidirectional

Diferenciadores clave

  • Four low-resistance selectors in one compact package (frente a ISL83699IR-T)
  • Fast source-selection performance (frente a ISL83699IR-T)
  • Bidirectional signal-path flexibility (frente a ISL83699IR-T)

Notas de diseño

Route each switched signal directly to its assigned QFN terminal and minimize the distance from the source or destination circuitry to the switch. Keep the analog path away from high-current switching nodes and clock edges. Because the device is optimized for 1.65 V to 3.6 V operation, place its supply-decoupling capacitor close to the package supply pins and connect the exposed pad according to the manufacturer land-pattern and thermal guidance.

Include switch on-resistance, off-state leakage, and source or destination input impedance when evaluating signal attenuation. The stated 0.26 ohm on-resistance is low, but it becomes significant when driving a high-impedance measurement node or a long PCB trace. Confirm the usable analog signal range, off-isolation, and switching-time conditions in the manufacturer datasheet for the selected supply voltage.

Do not allow control-pin voltages or analog signal levels to exceed the device limits when powered from 3.3 V or 1.8 V. Prevent conflicting control combinations if the application mutates the selected route, and define a safe state for power-up and reset. Use 1.8 V-compatible control levels with the specified 3 V supply, and confirm the exact ordering suffix and tape-and-reel format before manufacturing release.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer product page states that support is limited to customers who have already adopted these products. No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified.

Datos verificados el: 2026-11-10 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

ISL83699IR datasheet ISL83699IR specifications ISL83699IR pinout ISL83699IR datasheet pdf ISL83699IR equivalent ISL83699IR replacement ISL83699IR vs ISL83699IR-T ISL83699IR 16-QFN pinout Renesas ISL83699IR ISL83699IR 1.65V 3.6V ISL83699IR 0.26 ohm ISL83699IR battery powered switch ISL83699IR price ISL83699IR stock

Componentes & términos relacionados

Renesas Electronics ISL83699IR ISL83699IR-T quad SPDT switch dual DPDT analog switch analog switch bidirectional switch interface IC semiconductor 1.8 V logic compatibility single-supply operation on-resistance turn-on time turn-off time 16-QFN QFN package family surface-mount package 3 x 3 mm package battery-powered equipment portable measurement equipment signal routing mobile radio communication interface Renesas ISL83699
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ