Microchip Technology

KSZ8841-32MVLI - 10/100 Ethernet Controller | Microchip

N.º de pieza: KSZ8841-32MVLI ✓ Activo
128-LQFP Package
MOQ: 1 |

KSZ8841-32MVLI Descripción general

The Microchip Technology KSZ8841-32MVLI is a single-port Ethernet MAC controller with an integrated 10/100 Base-T/TX PHY and a generic 32-bit host-bus interface, housed in a 128-LQFP 14 x 14 mm package. It combines Ethernet media-access control, physical-layer signaling, and host-interface functions in one integrated circuit for compact industrial networking equipment.

An Ethernet MAC controller is an interface IC that manages frame transmission and reception between a processor and an Ethernet network. The associated PHY converts between digital Ethernet symbols and signals carried by twisted-pair cabling. Together, a MAC controller and PHY form the hardware boundary between a digital embedded system and a 10/100 Base-T network, reducing the number of discrete components required for an Ethernet port.

The KSZ8841-32MVLI provides a generic 32-bit bus interface rather than the PCI interface used by the PCI version of the KSZ8841 family. This makes it suitable for embedded processors, industrial controllers, and other systems that can connect through a parallel host bus. Its integrated 10/100 Base-T/TX PHY supports connection to standard 10/100 Ethernet networks through the appropriate magnetics and external circuit implementation described by the manufacturer.

The device is offered in a 128-LQFP package measuring 14 x 14 mm, providing many external signal connections for host-bus control, data, clocks, interrupts, power, and Ethernet physical-layer functions. The manufacturer classifies the KSZ8841 series as a family of single-port controllers with both PCI and non-PCI CPU-interface options. The 32MVLI ordering code identifies the non-PCI, generic 32-bit-interface configuration.

Typical uses include industrial Ethernet gateways, embedded control systems, programmable logic controller communications, instrumentation equipment, and compact network adapters. The integrated MAC/PHY architecture simplifies the hardware and software boundary for a connected embedded product, while the parallel host interface provides a direct path between the Ethernet engine and a microprocessor or other bus master.

Designers should follow the manufacturer reference design when assigning the generic host-bus signals, supplying the required clocks and decoupling, and implementing the Ethernet magnetics and analog network interface. Clock timing, signal-integrity practices, and controlled board layout are particularly important because the LQFP exposes numerous high-speed digital and Ethernet-related connections.

This product overview consolidates the verified device classification, interface configuration, package information, sourcing data, comparison points, and implementation guidance. It also distinguishes genuine same-footprint alternatives from related parts with different bus widths so engineers can evaluate PCB reuse without relying on family-name similarity alone.

Alternativas directas para KSZ8841-32MVLI — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con KSZ8841-32MVLI (mismo factor de forma y huella).

KSZ8841-32MVL

✅ Sustitución directa
📦 128-LQFP (14 x 14 mm)
Same 32-bit generic-interface family; suffix-grade characteristics require datasheet confirmation

📋 Alternativa de referencia (no en el catálogo)

KSZ8842-32MVLI

✅ Sustitución directa
📦 128-LQFP (14 x 14 mm)
Same 32-bit controller configuration; KSZ8842 family features differ

📋 Alternativa de referencia (no en el catálogo)

KSZ8842-32MVL

✅ Sustitución directa
📦 128-LQFP (14 x 14 mm)
Same 32-bit controller family; suffix-grade characteristics require datasheet confirmation

📋 Alternativa de referencia (no en el catálogo)

KSZ8842-16MVLI

✅ Sustitución directa
📦 128-LQFP (14 x 14 mm)
Host bus is 16-bit rather than 32-bit, a 50% reduction in bus width

📋 Alternativa de referencia (no en el catálogo)

KSZ8841-16MVLI

✅ Sustitución directa
Microchip Technology
📦 128-LQFP (14 x 14 mm)
Single-port Ethernet MAC controller with integrated PHY · 10/100 Mb/s · 10/100 Base-T/TX · 16 bit · 8/16/32 bit · 1 port · Yes · 4 byte

Consulte el precio

Ver hoja de datos →

KSZ8841-32MVLI Especificaciones

Product Type Single-port Ethernet MAC controller
Ethernet Standard 10/100 Base-T
Integrated PHY 10/100 Base-T/TX PHY
Host Interface Generic 32-bit bus
CPU Interface Family Non-PCI controller
Port Count 1 Ethernet port
Package Type 128-LQFP
Package Dimensions 14 x 14 mm
Tipo de montaje Surface mount
Supplier Device Category Controllers
Ethernet Interface Category Ethernet interface IC

Guía de configuración de pines de KSZ8841-32MVLI 14 x 14 mm

Configuración de pines para KSZ8841-32MVLI (encapsulado 14 x 14 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 14 x 14 mm para KSZ8841-32MVLI

No hay datos detallados de patillaje disponibles para KSZ8841-32MVLI.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

KSZ8841-32MVLI es adecuado para 6 aplicacións: Industrial Ethernet Gateway, Embedded Programmable Controller, PLC Communication Module, Test and Measurement Instrument, Network Appliance with Legacy CPU Bus, Industrial Sensor and Data Gateway.

🏭

Industrial Ethernet Gateway

The KSZ8841-32MVLI fits an industrial gateway requiring one 10/100 Base-T port and a direct processor connection. Its integrated 10/100 Base-T/TX PHY combines the Ethernet physical layer with the MAC controller, reducing the number of separate network-interface devices. The generic 32-bit non-PCI bus can connect to a suitable embedded processor or controller without requiring a PCI host. Implement the manufacturer reference circuit around the 128-LQFP, including its bypass capacitors, clocking, Ethernet magnetics, controlled routing, and connector protection. The benefit is a compact network boundary with a parallel host interface, although operating-temperature, isolation, surge, and EMC requirements must be checked for the target industrial environment.

🔧

Embedded Programmable Controller

The KSZ8841-32MVLI is suitable for an embedded controller that must exchange Ethernet frames with a host processor over a generic parallel bus. The 32-bit interface provides a wider data path than the 16-bit members of the KSZ8841 family, while the non-PCI organization avoids imposing a PCI host requirement. Place the controller close to the processor and route the host clock and data signals according to the manufacturer's timing guidance. Ethernet magnetics and the external network interface network remain essential for a complete twisted-pair port. The principal design trade-off is the 128-LQFP footprint and its numerous host, clock, power, and PHY connections, which require careful fan-out and multilayer routing.

⚙️

PLC Communication Module

The KSZ8841-32MVLI can serve as the Ethernet interface in a programmable logic controller or distributed automation module requiring a 10/100 Base-T connection. Integrating the MAC controller and Base-T/TX PHY provides one complete digital network subsystem for frame processing and physical signaling. Its generic 32-bit interface allows a PLC control processor to manage Ethernet traffic without embedding a separate PCI subsystem. Use the manufacturer reference layout for the 128-LQFP, preserve ground continuity beneath the device, and isolate high-speed or externally accessible network interfaces as required by the installation class. Functional suitability still depends on temperature range, power behavior, EMC performance, and network certification for the finished equipment.

🖥️

Test and Measurement Instrument

The KSZ8841-32MVLI is appropriate for an Ethernet-enabled measurement instrument that requires a compact 10/100 network port and processor-managed communications. The integrated 10/100 Base-T/TX PHY simplifies the physical-layer implementation, while the generic 32-bit host bus can support direct access to the Ethernet engine for status monitoring and configuration. Place decoupling capacitors at the power pins and route the host clock as a short, controlled-length signal to limit timing degradation. The Ethernet analog section and magnetics should follow the manufacturer reference design to reduce radiated emissions and maintain network performance. For laboratory instruments, add the required port protection and verify enclosure grounding, isolation, and EMC behavior during system validation.

🌐

Network Appliance with Legacy CPU Bus

The KSZ8841-32MVLI is useful in compact network appliances built around a legacy or embedded CPU that does not provide a native PCI interface. Its generic 32-bit bus gives the processor a direct parallel path to the single-port Ethernet controller, while the integrated 10/100 Base-T/TX PHY handles copper-network signaling. This architecture can reduce board area compared with separate MAC and PHY implementations. The design must accommodate a 128-LQFP with connections distributed across all four sides, so component placement, bus topology, fan-out, and layer transitions should be planned early. Use the manufacturer clocking and decoupling recommendations and avoid routing host-bus signals adjacent to the external Ethernet interface until signal-integrity simulations or measurements confirm adequate spacing.

🧩

Industrial Sensor and Data Gateway

The KSZ8841-32MVLI can connect a distributed sensor or data-acquisition gateway to a 10/100 Ethernet backbone. A generic 32-bit host interface allows the gateway processor to transfer measurement and configuration data efficiently, and the integrated PHY limits the Ethernet hardware footprint to one controller and the required external network components. The implementation should preserve short clock routes, continuous supply and ground distribution, and controlled separation between the digital host bus and Ethernet network section. External surge, isolation, and enclosure grounding may be required for cables leaving the enclosure. Confirm that the controller's operating limits meet the deployment temperature, power, and regulatory requirements rather than assuming that the 10/100 network rating alone covers field reliability.

Resumen de productos recomendados

KSZ8842-32MVLI Related single-port Ethernet controller Se usa en: Industrial Ethernet Gateway, Embedded Programmable Controller, Network Appliance with Legacy CPU Bus KSZ8841-16MVLI Microchip Technology Se usa en: Industrial Ethernet Gateway, PLC Communication Module, Industrial Sensor and Data Gateway KSZ8841-32MVL Related ordering variant Se usa en: Embedded Programmable Controller, Network Appliance with Legacy CPU Bus KSZ8842-16MVLI Related single-port controller Se usa en: PLC Communication Module, Industrial Sensor and Data Gateway KSZ8842-32MVL Related 32-bit controller Se usa en: Test and Measurement Instrument KSZ8841-32MVLI Microchip Technology Se usa en: Test and Measurement Instrument
What is the KSZ8841-32MVLI?
The KSZ8841-32MVLI is a single-port Ethernet MAC controller with an integrated 10/100 Base-T/TX PHY and a generic 32-bit host-bus interface. Microchip Technology packages it in a 128-LQFP measuring 14 x 14 mm. The non-PCI host interface makes it appropriate for embedded processors and industrial controllers that require a parallel CPU connection rather than a PCI bus.
Where can I download the KSZ8841-32MVLI datasheet?
The KSZ8841-32MVLI datasheet is accessible through the Microchip Technology KSZ8841 product page at https://www.microchip.com/en-us/product/KSZ8841. The manufacturer states that non-PCI controller information is associated with the KSZ8841-MQL documentation, while the PCI version uses separate documentation. Use the manufacturer's PDF for authoritative pin assignments, timing, electrical characteristics, and application circuits.
Where can I find the KSZ8841-32MVLI pinout?
The KSZ8841-32MVLI pinout is found in the KSZ8841-MQL manufacturer datasheet and its pin-description table. The device uses a 128-LQFP package, so the complete package includes 128 numbered positions. Assign PCB tracks from that table rather than relying on the generic Ethernet-controller classification, because the host-bus, clock, power, interrupt, and PHY signals must match exactly.
What are the key specifications of KSZ8841-32MVLI?
The KSZ8841-32MVLI combines one 10/100 Base-T/TX PHY with a generic 32-bit non-PCI host interface in a 128-LQFP 14 x 14 mm package. It is classified as a single-port Ethernet MAC controller for embedded and industrial networking equipment. The verified product data does not specify operating voltage, clock frequency, thermal limits, or dissipation, so those values should be taken from the manufacturer datasheet.
Is KSZ8841-32MVLI suitable for an industrial Ethernet controller?
The KSZ8841-32MVLI is suitable when the system needs one 10/100 Ethernet port, an integrated Base-T/TX PHY, and a generic 32-bit processor interface. Its non-PCI architecture can connect to embedded processors without requiring a PCI host. The manufacturer lists controllers as the product category, while final industrial suitability depends on temperature, operating voltage, qualification, and EMC requirements in the complete design.
What is the difference between KSZ8841-32MVLI and KSZ8841-16MVLI?
The principal difference is the host-bus width: KSZ8841-32MVLI uses a generic 32-bit interface, while KSZ8841-16MVLI uses a generic 16-bit interface. Both belong to the single-port 10/100 Ethernet controller family, but a 16-bit device may use different bus-width and address-related connections. Confirm every pin and signal timing in the manufacturer documentation before considering a board substitution.
Can KSZ8841-32MVLI replace KSZ8842-32MVLI?
KSZ8841-32MVLI and KSZ8842-32MVLI are closely related single-port Ethernet controllers with generic 32-bit interfaces, but they are not automatically interchangeable. The KSZ8842 family can differ in supported CPU interface, management features, and device-specific functions. Use the manufacturer comparison and both pin tables to confirm PCB, firmware, register, and timing compatibility before approving the substitution.
When should I choose KSZ8841-32MVLI over a KSZ8842 variant?
Choose KSZ8841-32MVLI when the design requires a single-port 10/100 Ethernet controller with a generic 32-bit non-PCI host interface and does not require the additional KSZ8842-family capabilities. A KSZ8842 variant is preferable only when its documented features are needed. Compare host-bus signals, PHY support, management features, clocking, package, and software-driver requirements before selecting the device.
What is the best drop-in replacement for KSZ8841-32MVLI?
The closest same-footprint candidate is KSZ8841-32MVL because it retains the 32-bit generic-interface ordering family and is associated with the same controller documentation. It should still undergo a formal pin, timing, lifecycle, and firmware review before substitution because suffix changes can indicate grade or packaging differences. The KSZ8841-16MVLI is not a drop-in choice when the existing board requires a 32-bit data path.
Is KSZ8841-32MVLI the same as KSZ8842-32MVLI?
No. KSZ8841-32MVLI and KSZ8842-32MVLI share the 32-bit single-port Ethernet-controller concept, but device features and CPU-interface arrangements can differ. The manufacturer product page distinguishes the KSZ8841 PCI and non-PCI controller families, and cross-reference material identifies KSZ8842-16MVLI and KSZ8842-32MVLI as separate comparisons. Check both datasheets before treating them as equivalent.
What is the best Microchip alternative for KSZ8841-32MVLI?
The closest Microchip alternative identified for a board-level review is KSZ8842-32MVLI because it preserves the generic 32-bit controller configuration. KSZ8842-16MVLI provides the same family with a narrower 16-bit interface, so it is not a direct replacement for a design requiring 32-bit transfers. Verify package pins, timing, supported PHY modes, and host-driver assumptions before selecting either alternative.
Where can I buy KSZ8841-32MVLI online?
Use the Request a Quote form on this XAIPART product page to request KSZ8841-32MVLI pricing, stock confirmation, lead time, and order quantities. The current sourcing landscape includes authorized catalog listings and other electronic-component channels, but availability can change without notice. Submit the exact MPN and required quantity so the quotation can reflect the appropriate package, grade, and delivery conditions.
What is the price of KSZ8841-32MVLI?
The current customer price for KSZ8841-32MVLI should be obtained through the Request a Quote form on this page. Commercial terms can vary with quantity, inventory, date code, packaging, and delivery requirements, so a static quote may not reflect a specific order. Provide the required quantity, target date, and shipment destination with the request.
What is the lead time and stock status of KSZ8841-32MVLI?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this XAIPART page. One catalog result described the exact MPN as in stock, but inventory is time-sensitive and does not establish a guaranteed allocation. Confirm the quantity, package, manufacturing date, and required delivery date when placing the request.
What design considerations apply to a KSZ8841-32MVLI PCB?
A KSZ8841-32MVLI layout should follow the manufacturer reference design, especially for the 128-LQFP power, ground, clock, host-bus, and Ethernet physical-layer connections. Keep clock and high-speed host signals short, provide the specified bypass capacitors close to their pins, maintain continuous ground planes, and implement the recommended Ethernet magnetics and routing. Confirm pin assignments against the KSZ8841-MQL datasheet before layout release.

Datos de referencia de ingeniería para KSZ8841-32MVLI — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the KSZ8841-32MVLI for an embedded design that needs one 10/100 Base-T port, an integrated Base-T/TX PHY, and a generic 32-bit non-PCI host bus. The KSZ8841-32MVL is the closest ordering-family candidate for an existing 32-bit design, subject to a complete review of suffix-related characteristics and lifecycle status. Consider KSZ8842-32MVLI or KSZ8842-32MVL only when the additional KSZ8842-family functions are useful and its documented CPU interface, clocking, register set, and driver support match the system. The KSZ8841-16MVLI and KSZ8842-16MVLI are not first choices for a board requiring a full 32-bit path because their bus width is reduced by 50%, potentially changing throughput, address wiring, and firmware. In every case, compare the manufacturer pin tables, timing requirements, power architecture, and package tolerances before approving a substitution.

Comparación con alternativas

Parámetro Este producto KSZ8841-32MVL KSZ8842-32MVLI KSZ8842-32MVL KSZ8842-16MVLI KSZ8841-16MVLI
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 128-LQFP (14 x 14 mm) 128-LQFP (14 x 14 mm) 128-LQFP (14 x 14 mm) 128-LQFP (14 x 14 mm) 128-LQFP (14 x 14 mm) 128-LQFP (14 x 14 mm)
Ethernet Port Count 1 1 1 1 1 1
Host Bus Width 32-bit 32-bit 32-bit 32-bit 16-bit 16-bit
CPU Interface Type Generic non-PCI bus Generic non-PCI bus Generic 32-bit bus Generic 32-bit bus Generic 16-bit bus Generic 16-bit bus
Pin Count 128 pins 128 pins 128 pins 128 pins 128 pins 128 pins

Diferenciadores clave

  • Direct 32-bit generic host interface (frente a KSZ8841-16MVLI)
  • Non-PCI embedded CPU integration (frente a KSZ8842-32MVLI)
  • Integrated Ethernet physical layer (frente a KSZ8842-32MVL)

Notas de diseño

Implement the 128-LQFP layout from the manufacturer reference design rather than treating the controller as a simple Ethernet PHY. Keep the host clock, clock input, and high-speed data routes short, provide the specified bypass capacitors directly at their associated pins, and maintain uninterrupted ground planes beneath and around the device. Plan escape routing for all four sides early because the 14 x 14 mm LQFP exposes a large number of host-bus and PHY signals.

Separate the Ethernet physical-layer section from the digital host-bus routing as recommended in the KSZ8841-MQL reference design. Preserve the specified component placement around the PHY and magnetics interface, use controlled return paths, and avoid long copper stubs. The integrated 10/100 Base-T/TX PHY does not remove the need for careful analog-and-digital partitioning; external magnetics, termination, protection, and connector selection remain part of the complete Ethernet channel.

Validate host-bus timing from the manufacturer specifications rather than assuming that nominal clock and data rates guarantee operation. Account for processor output delay, PCB propagation, input threshold, loading, and the controller's tolerance in the timing budget. For 32-bit replacements, verify every address and data connection and the associated enable or chip-select sequence. A 16-bit alternative may change bus width, address mapping, and software driver assumptions even if the package outline remains similar.

Do not approve a replacement based only on the Ethernet speed, bus-width description, or package outline. Compare the complete manufacturer pin tables, power pins, ground pins, clock requirements, strap options, PHY behavior, interrupt functions, reset sequencing, and package dimensions. Also verify driver support and any differences in register behavior. This prevents a nominally similar controller from causing an inoperable Ethernet port after PCB substitution.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer product page and verified catalog results do not state a specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this exact ordering code.

Datos verificados el: 2026-11-14 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

ksz8841 pmqli tr ksz8841 pmql ksz8841 datasheet KSZ8841-32MVLI datasheet KSZ8841-32MVLI pinout KSZ8841-32MVLI datasheet pdf KSZ8841-32MVLI equivalent KSZ8841-32MVLI replacement KSZ8841-32MVLI cross reference KSZ8841-32MVLI vs KSZ8842-32MVLI KSZ8841-32MVLI 128-LQFP footprint KSZ8841-32MVLI price KSZ8841-32MVLI stock Microchip KSZ8841-32MVLI KSZ8841-32MVLI industrial Ethernet controller

Componentes & términos relacionados

Microchip Technology KSZ8841-32MVLI KSZ8841-32MVL KSZ8841-16MVLI KSZ8842-32MVLI KSZ8842-32MVL KSZ8842-16MVLI Ethernet MAC controller 10/100 Base-T/TX PHY Ethernet physical layer generic 32-bit host bus non-PCI CPU interface single-port Ethernet controller 128-LQFP LQFP package family surface-mount semiconductor integrated circuit Ethernet interface IC industrial Ethernet embedded controller network interface Ethernet magnetics host clock RoHS REACH
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ