KSZ8841-32MVLI - 10/100 Ethernet Controller | Microchip
Référence : KSZ8841-32MVLI ✓ ActifKSZ8841-32MVLI Présentation
An Ethernet MAC controller is an interface IC that manages frame transmission and reception between a processor and an Ethernet network. The associated PHY converts between digital Ethernet symbols and signals carried by twisted-pair cabling. Together, a MAC controller and PHY form the hardware boundary between a digital embedded system and a 10/100 Base-T network, reducing the number of discrete components required for an Ethernet port.
The KSZ8841-32MVLI provides a generic 32-bit bus interface rather than the PCI interface used by the PCI version of the KSZ8841 family. This makes it suitable for embedded processors, industrial controllers, and other systems that can connect through a parallel host bus. Its integrated 10/100 Base-T/TX PHY supports connection to standard 10/100 Ethernet networks through the appropriate magnetics and external circuit implementation described by the manufacturer.
The device is offered in a 128-LQFP package measuring 14 x 14 mm, providing many external signal connections for host-bus control, data, clocks, interrupts, power, and Ethernet physical-layer functions. The manufacturer classifies the KSZ8841 series as a family of single-port controllers with both PCI and non-PCI CPU-interface options. The 32MVLI ordering code identifies the non-PCI, generic 32-bit-interface configuration.
Typical uses include industrial Ethernet gateways, embedded control systems, programmable logic controller communications, instrumentation equipment, and compact network adapters. The integrated MAC/PHY architecture simplifies the hardware and software boundary for a connected embedded product, while the parallel host interface provides a direct path between the Ethernet engine and a microprocessor or other bus master.
Designers should follow the manufacturer reference design when assigning the generic host-bus signals, supplying the required clocks and decoupling, and implementing the Ethernet magnetics and analog network interface. Clock timing, signal-integrity practices, and controlled board layout are particularly important because the LQFP exposes numerous high-speed digital and Ethernet-related connections.
This product overview consolidates the verified device classification, interface configuration, package information, sourcing data, comparison points, and implementation guidance. It also distinguishes genuine same-footprint alternatives from related parts with different bus widths so engineers can evaluate PCB reuse without relying on family-name similarity alone.
Alternatives de remplacement direct pour KSZ8841-32MVLI — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec KSZ8841-32MVLI (même facteur de forme et même empreinte).
KSZ8841-32MVL
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
KSZ8842-32MVLI
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
KSZ8842-32MVL
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
KSZ8842-16MVLI
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
KSZ8841-16MVLI
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →KSZ8841-32MVLI Spécifications
| Product Type | Single-port Ethernet MAC controller |
| Ethernet Standard | 10/100 Base-T |
| Integrated PHY | 10/100 Base-T/TX PHY |
| Host Interface | Generic 32-bit bus |
| CPU Interface Family | Non-PCI controller |
| Port Count | 1 Ethernet port |
| Package Type | 128-LQFP |
| Package Dimensions | 14 x 14 mm |
| Type de montage | Surface mount |
| Supplier Device Category | Controllers |
| Ethernet Interface Category | Ethernet interface IC |
Guide de configuration des broches du KSZ8841-32MVLI 14 x 14 mm
Configuration des broches du KSZ8841-32MVLI (boîtier 14 x 14 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour KSZ8841-32MVLI.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
KSZ8841-32MVLI convient pour 6 applications: Industrial Ethernet Gateway, Embedded Programmable Controller, PLC Communication Module, Test and Measurement Instrument, Network Appliance with Legacy CPU Bus, Industrial Sensor and Data Gateway.
Industrial Ethernet Gateway
The KSZ8841-32MVLI fits an industrial gateway requiring one 10/100 Base-T port and a direct processor connection. Its integrated 10/100 Base-T/TX PHY combines the Ethernet physical layer with the MAC controller, reducing the number of separate network-interface devices. The generic 32-bit non-PCI bus can connect to a suitable embedded processor or controller without requiring a PCI host. Implement the manufacturer reference circuit around the 128-LQFP, including its bypass capacitors, clocking, Ethernet magnetics, controlled routing, and connector protection. The benefit is a compact network boundary with a parallel host interface, although operating-temperature, isolation, surge, and EMC requirements must be checked for the target industrial environment.
Recommandé
Embedded Programmable Controller
The KSZ8841-32MVLI is suitable for an embedded controller that must exchange Ethernet frames with a host processor over a generic parallel bus. The 32-bit interface provides a wider data path than the 16-bit members of the KSZ8841 family, while the non-PCI organization avoids imposing a PCI host requirement. Place the controller close to the processor and route the host clock and data signals according to the manufacturer's timing guidance. Ethernet magnetics and the external network interface network remain essential for a complete twisted-pair port. The principal design trade-off is the 128-LQFP footprint and its numerous host, clock, power, and PHY connections, which require careful fan-out and multilayer routing.
Recommandé
PLC Communication Module
The KSZ8841-32MVLI can serve as the Ethernet interface in a programmable logic controller or distributed automation module requiring a 10/100 Base-T connection. Integrating the MAC controller and Base-T/TX PHY provides one complete digital network subsystem for frame processing and physical signaling. Its generic 32-bit interface allows a PLC control processor to manage Ethernet traffic without embedding a separate PCI subsystem. Use the manufacturer reference layout for the 128-LQFP, preserve ground continuity beneath the device, and isolate high-speed or externally accessible network interfaces as required by the installation class. Functional suitability still depends on temperature range, power behavior, EMC performance, and network certification for the finished equipment.
Recommandé
Test and Measurement Instrument
The KSZ8841-32MVLI is appropriate for an Ethernet-enabled measurement instrument that requires a compact 10/100 network port and processor-managed communications. The integrated 10/100 Base-T/TX PHY simplifies the physical-layer implementation, while the generic 32-bit host bus can support direct access to the Ethernet engine for status monitoring and configuration. Place decoupling capacitors at the power pins and route the host clock as a short, controlled-length signal to limit timing degradation. The Ethernet analog section and magnetics should follow the manufacturer reference design to reduce radiated emissions and maintain network performance. For laboratory instruments, add the required port protection and verify enclosure grounding, isolation, and EMC behavior during system validation.
Recommandé
Network Appliance with Legacy CPU Bus
The KSZ8841-32MVLI is useful in compact network appliances built around a legacy or embedded CPU that does not provide a native PCI interface. Its generic 32-bit bus gives the processor a direct parallel path to the single-port Ethernet controller, while the integrated 10/100 Base-T/TX PHY handles copper-network signaling. This architecture can reduce board area compared with separate MAC and PHY implementations. The design must accommodate a 128-LQFP with connections distributed across all four sides, so component placement, bus topology, fan-out, and layer transitions should be planned early. Use the manufacturer clocking and decoupling recommendations and avoid routing host-bus signals adjacent to the external Ethernet interface until signal-integrity simulations or measurements confirm adequate spacing.
Recommandé
Industrial Sensor and Data Gateway
The KSZ8841-32MVLI can connect a distributed sensor or data-acquisition gateway to a 10/100 Ethernet backbone. A generic 32-bit host interface allows the gateway processor to transfer measurement and configuration data efficiently, and the integrated PHY limits the Ethernet hardware footprint to one controller and the required external network components. The implementation should preserve short clock routes, continuous supply and ground distribution, and controlled separation between the digital host bus and Ethernet network section. External surge, isolation, and enclosure grounding may be required for cables leaving the enclosure. Confirm that the controller's operating limits meet the deployment temperature, power, and regulatory requirements rather than assuming that the 10/100 network rating alone covers field reliability.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour KSZ8841-32MVLI — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | KSZ8841-32MVL | KSZ8842-32MVLI | KSZ8842-32MVL | KSZ8842-16MVLI | KSZ8841-16MVLI |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 128-LQFP (14 x 14 mm) | 128-LQFP (14 x 14 mm) | 128-LQFP (14 x 14 mm) | 128-LQFP (14 x 14 mm) | 128-LQFP (14 x 14 mm) | 128-LQFP (14 x 14 mm) |
| Ethernet Port Count | 1 | 1 | 1 | 1 | 1 | 1 |
| Host Bus Width | 32-bit | 32-bit | 32-bit | 32-bit | 16-bit | 16-bit |
| CPU Interface Type | Generic non-PCI bus | Generic non-PCI bus | Generic 32-bit bus | Generic 32-bit bus | Generic 16-bit bus | Generic 16-bit bus |
| Pin Count | 128 pins | 128 pins | 128 pins | 128 pins | 128 pins | 128 pins |
Principaux différenciateurs
- Direct 32-bit generic host interface (vs KSZ8841-16MVLI)
- Non-PCI embedded CPU integration (vs KSZ8842-32MVLI)
- Integrated Ethernet physical layer (vs KSZ8842-32MVL)
Notes de conception
Implement the 128-LQFP layout from the manufacturer reference design rather than treating the controller as a simple Ethernet PHY. Keep the host clock, clock input, and high-speed data routes short, provide the specified bypass capacitors directly at their associated pins, and maintain uninterrupted ground planes beneath and around the device. Plan escape routing for all four sides early because the 14 x 14 mm LQFP exposes a large number of host-bus and PHY signals.
Separate the Ethernet physical-layer section from the digital host-bus routing as recommended in the KSZ8841-MQL reference design. Preserve the specified component placement around the PHY and magnetics interface, use controlled return paths, and avoid long copper stubs. The integrated 10/100 Base-T/TX PHY does not remove the need for careful analog-and-digital partitioning; external magnetics, termination, protection, and connector selection remain part of the complete Ethernet channel.
Validate host-bus timing from the manufacturer specifications rather than assuming that nominal clock and data rates guarantee operation. Account for processor output delay, PCB propagation, input threshold, loading, and the controller's tolerance in the timing budget. For 32-bit replacements, verify every address and data connection and the associated enable or chip-select sequence. A 16-bit alternative may change bus width, address mapping, and software driver assumptions even if the package outline remains similar.
Do not approve a replacement based only on the Ethernet speed, bus-width description, or package outline. Compare the complete manufacturer pin tables, power pins, ground pins, clock requirements, strap options, PHY behavior, interrupt functions, reset sequencing, and package dimensions. Also verify driver support and any differences in register behavior. This prevents a nominally similar controller from causing an inoperable Ethernet port after PCB substitution.
Informations de conformité
The manufacturer product page and verified catalog results do not state a specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this exact ordering code.