LAN8710AI-EZK-TR-ABC - 10/100 Ethernet PHY | Microchip
N.º de pieza: LAN8710AI-EZK-TR-ABC ✓ ActivoLAN8710AI-EZK-TR-ABC Descripción general
An Ethernet PHY is the physical-layer device that converts logical data from an Ethernet MAC into signals that can traverse a copper cable. The PHY sits below the MAC in the Ethernet hierarchy and directly controls the 10BASE-T or 100BASE-TX physical link. The LAN8710AI-EZK-TR-ABC combines this physical-layer function with flexible digital interfacing, automatic link negotiation, and low-power operation in a compact surface-mount package.
Key features include support for both 10 Mb/s and 100 Mb/s Ethernet operation, MII and RMII interfaces, variable digital I/O voltage, HP Auto-MDIX, and automatic speed and duplex negotiation. The industrial-temperature option supports operation from -40°C to 85°C, making the device suitable for industrial controls, embedded systems, communications equipment, and connected products that require a compact 10/100 Ethernet interface.
The LAN8710AI family uses Microchip flexPWR technology and is designed for space-constrained, power-sensitive applications. Its MII interface provides parallel digital signaling for implementations requiring broader MAC control, while RMII reduces the number of interface signals for designs seeking a smaller, lower-power connection. The manufacturer documentation identifies IEEE 802.3-2005 compliance and both commercial and industrial temperature variants within the family.
Typical applications include industrial Ethernet controllers, embedded Linux platforms, factory automation equipment, serial-to-Ethernet systems, network interface cards, set-top equipment, and embedded network interfaces requiring 10/100BASE-TX connectivity. The small 5x5 mm package also supports compact industrial control boards and connected instrumentation where board area is limited.
Designers should preserve the manufacturer's recommended power and decoupling networks, provide an appropriate crystal or clock source, and follow the reference layout in the LAN8710A/LAN8710Ai datasheet. The exposed thermal pad requires suitable ground-plane copper and thermal-via treatment. Magnetic isolation between the PHY and Ethernet cable is normally implemented in the external magnetics and RJ45 interface network.
This page combines manufacturer specifications, application guidance, practical PCB considerations, and a parameter-focused comparison with same-package alternatives. It is designed to help engineers determine whether the LAN8710AI-EZK-TR-ABC matches the required Ethernet speed, MAC interface, package, temperature range, and industrial design constraints.
Alternativas directas para LAN8710AI-EZK-TR-ABC — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con LAN8710AI-EZK-TR-ABC (mismo factor de forma y huella) — difiere en Package, Power Technology, MAC Interface, Cable Support, Channel Count.
LAN8710A-EZK
✅ Sustitución directaConsulte el precio
Ver hoja de datos →LAN8710AI-EZK-ABC
✅ Sustitución directaConsulte el precio
Ver hoja de datos →LAN8710A-EZC-AB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LAN8710AI-EZK-TR-ABC Especificaciones
| Product Type | 10BASE-T/100BASE-TX Ethernet physical-layer transceiver |
| Supported Ethernet Speeds | 10 Mb/s and 100 Mb/s |
| MAC Interface | MII or RMII digital interface |
| Encapsulado | 32-SQFN, 5x5 mm |
| Tipo de montaje | Surface mount |
| Industrial Temperature Range | -40°C to 85°C |
| Cable Support | 10BASE-T and 100BASE-TX |
| Auto-Negotiation | Supported |
| Auto-MDIX | HP Auto-MDIX supported |
| Digital I/O | Variable voltage |
| Low-Power Technology | Microchip flexPWR technology |
| Ethernet Compliance | IEEE 802.3-2005 |
| Manufacturer Product Family | LAN8710A/LAN8710Ai |
| Transceiver Count | 1 Ethernet transceiver |
| Estado RoHS | Compliant |
Guía de configuración de pines de LAN8710AI-EZK-TR-ABC 32-sqfn, 5x5 mm
Configuración de pines para LAN8710AI-EZK-TR-ABC (encapsulado 32-sqfn, 5x5 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para LAN8710AI-EZK-TR-ABC.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
LAN8710AI-EZK-TR-ABC es adecuado para 6 aplicacións: Industrial Ethernet Control Systems, Embedded Linux Network Interfaces, Factory Automation Terminals, Serial-to-Ethernet Gateways, Network Measurement Instruments, Connected Consumer and Appliance Products.
Industrial Ethernet Control Systems
The LAN8710AI-EZK-TR-ABC is appropriate for compact industrial controllers that require 10BASE-T or 100BASE-TX connectivity without allocating a large board area to the Ethernet PHY. Its 32-SQFN 5x5 mm package and industrial -40°C to 85°C rating fit equipment exposed to factory temperature variation. The PHY provides automatic speed and duplex negotiation plus HP Auto-MDIX, allowing the controller to connect reliably with direct or crossover cables. Designers should follow the manufacturer's reference layout, preserve the clock and decoupling networks, and implement the external magnetics network specified by the LAN8710A datasheet.
Recomendado
Embedded Linux Network Interfaces
The LAN8710AI-EZK-TR-ABC can provide the physical layer beneath an embedded Linux MAC in industrial gateways, embedded servers, and connected test equipment. Support for both MII and RMII lets the host processor be selected according to bus width and platform architecture rather than forcing one interface style across every design. At 10 Mb/s or 100 Mb/s, automatic negotiation allows the system to adapt to the available switch port. A disciplined approach to the exposed thermal pad, supply bypass capacitors, clock source, and Ethernet magnetics is essential for maintaining signal integrity and predictable boot-up behavior.
Recomendado
Factory Automation Terminals
Factory terminals and remote I/O stations benefit from the LAN8710AI-EZK-TR-ABC's combination of a small 32-SQFN footprint, low-power operation, and an extended industrial temperature range. The PHY's HP Auto-MDIX capability reduces cable-configuration constraints on installation sites where technicians may encounter direct or crossover connections. Automatic speed and duplex negotiation simplifies interoperability with legacy 10 Mb/s equipment and modern 100 Mb/s infrastructure. Board implementation should provide the manufacturer-recommended magnetic isolation and controlled-impedance routing between the PHY, magnetics, and RJ45 connector.
Recomendado
Serial-to-Ethernet Gateways
A serial-to-Ethernet gateway can use the LAN8710AI-EZK-TR-ABC as the 10/100BASE-TX physical interface while an embedded controller handles packet processing and serial conversion. MII support is useful when the host controller already implements a wider parallel MAC interface, whereas RMII can reduce pin count and board complexity in space-constrained gateways. The industrial temperature option supports equipment deployed outside controlled rooms. Engineers should budget PCB area for magnetics, provide stable clocking, and use the datasheet reference layout to minimize radiated emissions and susceptibility to industrial noise.
Recomendado
Network Measurement Instruments
The LAN8710AI-EZK-TR-ABC is suitable for measurement instruments and communication analyzers requiring a compact 10/100 Ethernet management port. Its automatic negotiation and HP Auto-MDIX functions improve setup compatibility across laboratory and field networks, while the small package leaves more PCB area for analog, display, or processing circuitry. The MAC interface must be configured to match the host bus timing and voltage requirements. Maintain short return paths, place supply decoupling close to the device, and isolate the Ethernet magnetics from sensitive analog sections to reduce coupling.
Recomendado
Connected Consumer and Appliance Products
Space-constrained consumer appliances and connected products can use the LAN8710AI-EZK-TR-ABC when an embedded Ethernet connection is required alongside a main application processor. The 5x5 mm SQFN footprint supports dense boards, while MII or RMII selection lets the implementation match the host processor interface. Automatic negotiation and HP Auto-MDIX improve user setup reliability when connected to varied home and office switches. Although the industrial temperature grade provides useful margin, developers should still validate the complete system for condensation, vibration, ESD, and Ethernet cable-surge requirements.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para LAN8710AI-EZK-TR-ABC — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | LAN8710A-EZK | LAN8710AI-EZK-ABC | LAN8710A-EZC-AB |
|---|---|---|---|---|
| Package | 32-SQFN (5x5 mm) | 32-QFN (5x5 mm) | 32-SQFN (5x5 mm) | 32-QFN |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Ethernet Speeds | 10 Mb/s and 100 Mb/s | 10 Mb/s and 100 Mb/s | 10 Mb/s and 100 Mb/s | 10 Mb/s and 100 Mb/s |
| MAC Interface | MII or RMII | MII or RMII | MII or RMII | MII or RMII |
| Ordering-Code Difference | Industrial AI grade, EZK package, tape-and-reel TR suffix, ABC suffix | Extended-commercial A grade with EZK package | Industrial AI grade with EZK package and ABC suffix | A grade with EZC package and AB suffix |
Diferenciadores clave
- Broader industrial temperature coverage (frente a LAN8710A-EZK)
- Direct industrial-grade ordering option (frente a LAN8710AI-EZK-ABC)
- Same family footprint for controlled redesigns (frente a LAN8710A-EZC-AB)
Notas de diseño
Follow the LAN8710A/LAN8710Ai reference layout and place all input and output bypass capacitors immediately adjacent to their associated supply pins. Route the PHY-to-MAC interface as a short, controlled-impedance digital bus, and keep the clock source and traces away from the Ethernet magnetics and cable-side network. The 32-SQFN exposed pad should be tied to ground using the manufacturer's recommended via pattern, while preserving adequate ground copper for both electrical return current and thermal dissipation.
The Ethernet copper interface should use the external magnetics and reference network shown in the manufacturer application circuit. Maintain controlled differential-impedance routing between the PHY and magnetic components, use symmetrical geometry for the pair, and avoid stubs or test-point structures that create discontinuities. Keep the cable-side network physically separated from clocks, switching regulators, and sensitive analog circuitry to reduce emissions and improve immunity to industrial electrical noise.
Design the supply network around the voltage requirements in the manufacturer datasheet and verify the operating limits against the selected MAC and clocking scheme. Because the LAN8710A family supports variable digital I/O voltage, the digital interface supply must match the host MAC rather than being assumed to match the PHY core supply. Use local bulk and high-frequency decoupling, provide a low-noise clock, and account for startup current so the Ethernet PHY does not disturb adjacent signal-chain rails.
Do not substitute a functional 10/100 PHY without checking the complete hardware contract. Confirm the 32-pin package, exposed-pad arrangement, MII or RMII selection, clock source, reset behavior, strap options, supply voltages, and magnetics topology. A same-speed PHY with a different pin assignment can require a PCB redesign, and a different interface mode can produce an apparently dead Ethernet link even when the PHY itself is operating correctly.
Información de cumplimiento
RoHS compliance is reported for the exact ordering code. No manufacturer statement confirming REACH, lead-free status, halogen-free status, conflict-minerals compliance, or automotive qualification was identified.