LC4064C-5T100C - SuperFAST High-Density CPLD | Lattice
N.º de pieza: LC4064C-5T100C ✗ Fin de vidaLC4064C-5T100C Descripción general
A complex programmable logic device, or CPLD, is a programmable digital semiconductor that combines multiple programmable logic blocks with a deterministic interconnect structure. The broader hierarchy is CPLD → programmable logic device → programmable logic → semiconductor. Unlike a software-driven processor, a CPLD executes its configured Boolean and sequential logic directly in hardware, providing deterministic response times and allowing design revisions through reprogramming.
The LC4064C architecture provides a large platform for integrating control, interface, decoding, and glue-logic functions. Its family is identified as a SuperFAST high-density PLD, while the LC4064C part family supports 3.3 V, 2.5 V, and 1.8 V operation. This multi-voltage capability is useful when the device must interface with logic operating at different supply levels. Programming and configuration details must be implemented using the procedures and device support specified by Lattice Semiconductor.
The -5 suffix denotes a nominal 5 ns speed grade. This timing classification is more useful than a generic clock-frequency claim because CPLD propagation and pin timing are specified across multiple operating conditions. System timing closure should therefore use the manufacturer's pin characteristics, AC test conditions, setup requirements, and hold requirements rather than treating the speed suffix as a standalone system-clock limit.
Typical applications include industrial control and automation, general-purpose interface logic, data acquisition systems, consumer peripherals, communications equipment, and embedded control subsystems. In each case, the device can consolidate parallel logic, control sequencing, address decoding, state-machine behavior, and board-level interface functions into one programmable component while retaining a fixed pin-compatible hardware design between program revisions.
The primary design consideration is exact footprint and timing validation. Confirm the physical TQFP-100 land pattern, pin assignments, supply rails, decoupling requirements, configuration interface, and I/O standards against the manufacturer datasheet before committing a PCB. Although the -5 grade provides strong timing performance, every external interface still requires propagation-delay and timing-margin analysis under the intended voltage, temperature, and load conditions.
This product record combines the manufacturer device description, catalog identifiers, lifecycle information, and cross-reference candidates into an engineering-focused selection guide. It also distinguishes true package-compatible replacement candidates from comparisons that may require a different footprint, supply arrangement, programming file, or timing review. That practical distinction helps shorten sourcing and redesign evaluation for obsolete or end-of-life programmable-logic designs.
Alternativas directas para LC4064C-5T100C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con LC4064C-5T100C (mismo factor de forma y huella) — difiere en Device Type, Package, Internal Supply Range, Speed Grade.
LC4064C-5TN100C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LC4064C-5T100I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →LC4064V-5T100C
✅ Sustitución directaConsulte el precio
Ver hoja de datos →LC4064B-5T100C
✅ Sustitución directaConsulte el precio
Ver hoja de datos →LC4064ZE-5TN100C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LC4064V-75TN100C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LC4064C-5T100C Valores máximos y características eléctricas
| Device Type | SuperFAST high-density complex programmable logic device |
| Device Family | LC4064C |
| Programmability | In-system programmable |
| Supported Supply Voltages | 3.3 V, 2.5 V, and 1.8 V |
| Speed Grade | -5 nominal 5 ns grade |
| Encapsulado | 100-pin TQFP |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de LC4064C-5T100C 100-pin tqfp
Configuración de pines para LC4064C-5T100C (encapsulado 100-pin tqfp). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para LC4064C-5T100C.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
LC4064C-5T100C es adecuado para 6 aplicacións: Industrial Control and Automation, Data Acquisition and Signal Conditioning, Communication Interface Consolidation, Embedded Control Subsystems, Consumer Peripheral Interface Logic, Test and Measurement Equipment.
Industrial Control and Automation
The LC4064C-5T100C is appropriate for deterministic industrial-control logic that combines sequencing, state-machine behavior, limit checking, and peripheral-interface decoding. Its -5 nominal speed grade supports timing-sensitive logic, while the 100-pin TQFP package provides a substantial number of connections for shared buses and field I/O. In-System programming allows control revisions to be deployed without changing the PCB. Designers should verify the selected temperature grade, isolation boundaries, supply levels, and I/O standards against the Lattice datasheet before connecting field-facing signals.
Recomendado
Data Acquisition and Signal Conditioning
The LC4064C-5T100C can implement acquisition-system control logic, including channel selection, timing coordination, data-format conversion, trigger routing, and status reporting. A CPLD provides deterministic hardware behavior without the interrupt overhead of a general-purpose processor. The -5 timing classification is relevant to control paths, but analog acquisition accuracy remains governed by the external sensors, amplifiers, reference circuitry, and converters. Signal-conditioning designers should partition sensitive analog paths from digital activity, follow grounding recommendations, and validate every input threshold against the device electrical characteristics.
Recomendado
Communication Interface Consolidation
The LC4064C-5T100C is suitable for consolidating parallel communication interfaces, protocol adapters, framing logic, CRC generation, command decoding, and buffer arbitration into one programmable device. The 100-pin TQFP package supports numerous I/O assignments, making it useful where several legacy interface blocks would otherwise occupy multiple fixed-logic devices. Its 3.3 V, 2.5 V, and 1.8 V family support is useful for mixed-voltage interfaces, but each external I/O still requires explicit voltage-level and timing validation. Programming-file version control is essential when interface logic changes.
Recomendado
Embedded Control Subsystems
Within an embedded controller, the LC4064C-5T100C can implement peripheral chip selects, bus arbitration, watchdog supervision, power sequencing, actuator-command decoding, and deterministic interlocks. Its hardware execution model gives repeatable response behavior for time-critical paths, while in-system programming simplifies production testing and field upgrades. Because the LC4064C family is end-of-life, designers should document the configuration file, programming algorithm, pin constraints, and approved alternate source before committing a new long-lived platform.
Recomendado
Consumer Peripheral Interface Logic
The LC4064C-5T100C can consolidate programmable glue logic around displays, buttons, sensors, storage interfaces, and external converters. The 100-pin package is useful when a product includes multiple buses and discrete control signals that must be routed according to product configuration. Its 1.8 V, 2.5 V, and 3.3 V family support can simplify interface planning across several logic domains. Verify pin multiplexing, configuration behavior, and supply sequencing with the manufacturer documentation, and treat any end-of-life sourcing plan as a controlled lifecycle-management activity.
Recomendado
Test and Measurement Equipment
The LC4064C-5T100C is useful in programmable test and measurement systems for sequencing, relay-control logic, instrument-bus decoding, trigger distribution, and front-panel I/O. The -5 nominal speed grade benefits short control paths, while deterministic hardware operation supports repeatable sequencing. A robust design should include configuration checksum monitoring, safe outputs during initialization, and clear separation between external measurement paths and digital control circuitry. Verify operating-temperature requirements, pin tolerance, and I/O drive limits for every instrument connection before production release.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para LC4064C-5T100C — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | LC4064C-5TN100C | LC4064C-5T100I | LC4064V-5T100C | LC4064B-5T100C | LC4064ZE-5TN100C |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor Corporation | Lattice Semiconductor Corporation | Lattice Semiconductor Corporation | Lattice Semiconductor Corporation | Lattice Semiconductor Corporation | Lattice Semiconductor Corporation |
| Package | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 |
| Device Family | LC4064C | LC4064C | LC4064C | LC4064V | LC4064B | LC4064ZE |
| Nominal Speed Suffix | -5 | -5 | -5 | -5 | -5 | -5 |
| Temperature Grade Suffix | C | N | I | C | C | N |
Diferenciadores clave
- Direct selection of the LC4064C architecture and C temperature grade (frente a LC4064C-5T100I)
- Maintains the nominal 5 ns speed class across the closest family candidates (frente a LC4064V-75TN100C)
- Uses the standard LC4064C family designation for the intended configuration workflow (frente a LC4064ZE-5TN100C)
Notas de diseño
Do not treat every LC4064 suffix variant as interchangeable. The C, V, B, and ZE family codes can identify different architectures, while the N, I, and C suffix codes identify environmental grades. Before substitution, compare the complete pin-description table, configuration interface, supply requirements, programmable logic capacity, AC timing, and package drawings. A matching TQFP-100 footprint establishes mechanical compatibility only; it does not by itself establish functional or electrical interchangeability.
Route the configuration and programming signals according to the Lattice layout guidance and keep them away from sensitive analog or high-speed nets. Place required bypass capacitors close to their associated supply and ground pins, with short return paths and a quiet ground-plane strategy. Because this is a 100-pin fine-pitch TQFP, use the manufacturer land pattern dimensions and check solder-mask, paste, and assembly tolerances rather than constructing a footprint solely from the generic package name.
The LC4064C family supports 3.3 V, 2.5 V, and 1.8 V environments, but each rail has distinct operating limits and configuration behavior. Confirm the exact core and I/O supply arrangement, sequencing requirements, input thresholds, output-drive limits, and I/O standard from the manufacturer electrical tables. Do not assume that a neighboring 3.3 V peripheral can be connected directly to a 2.5 V or 1.8 V section without checking voltage tolerance and configuration settings.
For an end-of-life design, preserve the programmed configuration file, its checksum, the device programmer settings, and the package orientation documentation. Use a hardware configuration checksum or equivalent monitoring scheme so a failed or incomplete configuration is detected before control outputs become active. When moving to a substitute device, generate and inspect a fresh timing report rather than assuming that an identical -5 suffix preserves the original design’s timing margin.
Información de cumplimiento
The LC4064C family is identified as discontinued. Specific environmental, lead-free, halogen-free, and conflict-minerals declarations were not confirmed in the cited product records and require manufacturer documentation for the exact device.