최종 구매 공지: LC4064C-5T100C 단종에 가까워지고 있습니다. 최종 주문일: 문의하기. 사용 가능한 대체 부품 보기 →
Lattice Semiconductor

LC4064C-5T100C - SuperFAST High-Density CPLD | Lattice

부품 번호: LC4064C-5T100C ✗ 단종
3.3 V, 2.5 V, and 1.8 V Vdss 100-pin TQFP Package -5 nominal 5 ns grade Speed
MOQ: 1 |

LC4064C-5T100C 개요

Lattice Semiconductor Corporation LC4064C-5T100C is a SuperFAST high-density complex programmable logic device in a 100-pin TQFP package. It is an in-system programmable PLD designed for multi-voltage digital logic systems and supports 3.3 V, 2.5 V, and 1.8 V supply environments. Its -5 speed designation identifies it as the 5 ns performance grade within the LC4064C family.

A complex programmable logic device, or CPLD, is a programmable digital semiconductor that combines multiple programmable logic blocks with a deterministic interconnect structure. The broader hierarchy is CPLD → programmable logic device → programmable logic → semiconductor. Unlike a software-driven processor, a CPLD executes its configured Boolean and sequential logic directly in hardware, providing deterministic response times and allowing design revisions through reprogramming.

The LC4064C architecture provides a large platform for integrating control, interface, decoding, and glue-logic functions. Its family is identified as a SuperFAST high-density PLD, while the LC4064C part family supports 3.3 V, 2.5 V, and 1.8 V operation. This multi-voltage capability is useful when the device must interface with logic operating at different supply levels. Programming and configuration details must be implemented using the procedures and device support specified by Lattice Semiconductor.

The -5 suffix denotes a nominal 5 ns speed grade. This timing classification is more useful than a generic clock-frequency claim because CPLD propagation and pin timing are specified across multiple operating conditions. System timing closure should therefore use the manufacturer's pin characteristics, AC test conditions, setup requirements, and hold requirements rather than treating the speed suffix as a standalone system-clock limit.

Typical applications include industrial control and automation, general-purpose interface logic, data acquisition systems, consumer peripherals, communications equipment, and embedded control subsystems. In each case, the device can consolidate parallel logic, control sequencing, address decoding, state-machine behavior, and board-level interface functions into one programmable component while retaining a fixed pin-compatible hardware design between program revisions.

The primary design consideration is exact footprint and timing validation. Confirm the physical TQFP-100 land pattern, pin assignments, supply rails, decoupling requirements, configuration interface, and I/O standards against the manufacturer datasheet before committing a PCB. Although the -5 grade provides strong timing performance, every external interface still requires propagation-delay and timing-margin analysis under the intended voltage, temperature, and load conditions.

This product record combines the manufacturer device description, catalog identifiers, lifecycle information, and cross-reference candidates into an engineering-focused selection guide. It also distinguishes true package-compatible replacement candidates from comparisons that may require a different footprint, supply arrangement, programming file, or timing review. That practical distinction helps shorten sourcing and redesign evaluation for obsolete or end-of-life programmable-logic designs.

드롭인 대체품: LC4064C-5T100C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: LC4064C-5T100C (동일 폼 팩터 및 풋프린트) — 차이점: Device Type, Package, Internal Supply Range, Speed Grade.

Lattice Semiconductor
Device Type: ispMACH 4000C CPLD
Internal Supply Range: 1.65 V to 1.95 V
비교 대상: LC4064C-5T100C →
Lattice Semiconductor
Package: 100-pin TQFP, 14 mm x 14 mm
Internal Supply Range: 3.0 V to 3.6 V
Speed Grade: 5 ns grade
비교 대상: LC4064C-5T100C →

LC4064C-5TN100C

✅ 드롭인
📦 TQFP-100
Same LC4064C family, -5 speed class, and 100-pin footprint; N temperature grade changes the operating-temperature class versus the C grade.

📋 참조 대체품 (카탈로그에 없음)

LC4064C-5T100I

✅ 드롭인
Lattice Semiconductor
📦 TQFP-100
ispMACH 4000C CPLD · 64 macrocells · 227 MHz · 5 ns · 1.8 V · 1.65 V to 1.95 V · 100-pin TQFP · Surface mount

가격 문의

데이터시트 보기 →

LC4064V-5T100C

✅ 드롭인
Lattice Semiconductor
📦 TQFP-100
SuperFAST high-density complex programmable logic device · 3.3 V · 3.0 V to 3.6 V · 64 I/O · 3.3 V, 2.5 V, and 1.8 V · In-system programmable · 5 ns grade · 100-pin TQFP, 14 mm x 14 mm

가격 문의

데이터시트 보기 →

LC4064B-5T100C

✅ 드롭인
Lattice Semiconductor
📦 TQFP-100
Complex Programmable Logic Device (CPLD) · ispMACH 4000B · 64 macrocells · 64 I/O pins · 5 ns · 227 MHz · 2.3 V to 2.7 V · In-system programmable

가격 문의

데이터시트 보기 →

LC4064ZE-5TN100C

✅ 드롭인
📦 TQFP-100
Same 100-pin package footprint and nominal 5 ns class; the ZE family and N temperature suffix change electrical, functional, and environmental requirements.

📋 참조 대체품 (카탈로그에 없음)

LC4064V-75TN100C

✅ 드롭인
📦 TQFP-100
Same 100-pin footprint, but the -75 speed designation is 70 ns slower than the nominal -5 class, a 1,400% increase in nominal timing value.

📋 참조 대체품 (카탈로그에 없음)

LC4064C-5T100C 최대 정격 & 전기적 특성

Device Type SuperFAST high-density complex programmable logic device
Device Family LC4064C
Programmability In-system programmable
Supported Supply Voltages 3.3 V, 2.5 V, and 1.8 V
Speed Grade -5 nominal 5 ns grade
패키지 100-pin TQFP
실장 유형 Surface mount

LC4064C-5T100C 100-pin tqfp 핀 구성 가이드

LC4064C-5T100C(100-pin tqfp 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

LC4064C-5T100C의 100-pin tqfp 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: LC4064C-5T100C.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

LC4064C-5T100C 적합 용도: 6 애플리케이션s: Industrial Control and Automation, Data Acquisition and Signal Conditioning, Communication Interface Consolidation, Embedded Control Subsystems, Consumer Peripheral Interface Logic, Test and Measurement Equipment.

🏭

Industrial Control and Automation

The LC4064C-5T100C is appropriate for deterministic industrial-control logic that combines sequencing, state-machine behavior, limit checking, and peripheral-interface decoding. Its -5 nominal speed grade supports timing-sensitive logic, while the 100-pin TQFP package provides a substantial number of connections for shared buses and field I/O. In-System programming allows control revisions to be deployed without changing the PCB. Designers should verify the selected temperature grade, isolation boundaries, supply levels, and I/O standards against the Lattice datasheet before connecting field-facing signals.

📟

Data Acquisition and Signal Conditioning

The LC4064C-5T100C can implement acquisition-system control logic, including channel selection, timing coordination, data-format conversion, trigger routing, and status reporting. A CPLD provides deterministic hardware behavior without the interrupt overhead of a general-purpose processor. The -5 timing classification is relevant to control paths, but analog acquisition accuracy remains governed by the external sensors, amplifiers, reference circuitry, and converters. Signal-conditioning designers should partition sensitive analog paths from digital activity, follow grounding recommendations, and validate every input threshold against the device electrical characteristics.

🌐

Communication Interface Consolidation

The LC4064C-5T100C is suitable for consolidating parallel communication interfaces, protocol adapters, framing logic, CRC generation, command decoding, and buffer arbitration into one programmable device. The 100-pin TQFP package supports numerous I/O assignments, making it useful where several legacy interface blocks would otherwise occupy multiple fixed-logic devices. Its 3.3 V, 2.5 V, and 1.8 V family support is useful for mixed-voltage interfaces, but each external I/O still requires explicit voltage-level and timing validation. Programming-file version control is essential when interface logic changes.

🔧

Embedded Control Subsystems

Within an embedded controller, the LC4064C-5T100C can implement peripheral chip selects, bus arbitration, watchdog supervision, power sequencing, actuator-command decoding, and deterministic interlocks. Its hardware execution model gives repeatable response behavior for time-critical paths, while in-system programming simplifies production testing and field upgrades. Because the LC4064C family is end-of-life, designers should document the configuration file, programming algorithm, pin constraints, and approved alternate source before committing a new long-lived platform.

📱

Consumer Peripheral Interface Logic

The LC4064C-5T100C can consolidate programmable glue logic around displays, buttons, sensors, storage interfaces, and external converters. The 100-pin package is useful when a product includes multiple buses and discrete control signals that must be routed according to product configuration. Its 1.8 V, 2.5 V, and 3.3 V family support can simplify interface planning across several logic domains. Verify pin multiplexing, configuration behavior, and supply sequencing with the manufacturer documentation, and treat any end-of-life sourcing plan as a controlled lifecycle-management activity.

🖥️

Test and Measurement Equipment

The LC4064C-5T100C is useful in programmable test and measurement systems for sequencing, relay-control logic, instrument-bus decoding, trigger distribution, and front-panel I/O. The -5 nominal speed grade benefits short control paths, while deterministic hardware operation supports repeatable sequencing. A robust design should include configuration checksum monitoring, safe outputs during initialization, and clear separation between external measurement paths and digital control circuitry. Verify operating-temperature requirements, pin tolerance, and I/O drive limits for every instrument connection before production release.

추천 제품 요약

LC4064C-5T100I Lattice Semiconductor 사용처: Industrial Control and Automation, Data Acquisition and Signal Conditioning, Embedded Control Subsystems, Test and Measurement Equipment LC4064C-5TN100C Same-family package-compatible option 사용처: Industrial Control and Automation, Communication Interface Consolidation, Consumer Peripheral Interface Logic LC4064V-5T100C Lattice Semiconductor 사용처: Data Acquisition and Signal Conditioning, Embedded Control Subsystems LC4064B-5T100C Lattice Semiconductor 사용처: Communication Interface Consolidation LC4064ZE-5TN100C Same-footprint alternate family candidate 사용처: Consumer Peripheral Interface Logic LC4064V-75TN100C Same-footprint slower-speed candidate 사용처: Test and Measurement Equipment
What is the LC4064C-5T100C?
The LC4064C-5T100C is a Lattice Semiconductor Corporation SuperFAST high-density complex programmable logic device with in-system programming support. It is supplied in a 100-pin TQFP package and is intended for multi-voltage digital logic designs. According to the Lattice device documentation, the LC4064C family supports 3.3 V, 2.5 V, and 1.8 V supply environments, with the -5 suffix identifying a nominal 5 ns speed grade.
What are the key specifications of LC4064C-5T100C that engineers should know?
The LC4064C-5T100C is a 5 ns SuperFAST CPLD in a 100-pin TQFP package with in-system programming and 3.3 V, 2.5 V, or 1.8 V support. Lattice describes the LC4064C as a high-density programmable logic device. Use these identifiers for initial family matching, then consult the manufacturer datasheet for logic capacity, I/O count, AC timing, configuration details, electrical limits, and package dimensions before completing a design.
What does the -5 designation mean for LC4064C-5T100C?
The -5 designation identifies the nominal 5 ns speed grade of the LC4064C-5T100C. It is a timing classification for the programmable logic device, not a promise that every circuit will operate at 200 MHz. Actual timing depends on the implemented logic path, package, I/O standard, supply voltage, temperature, and loading. Use the Lattice AC characteristics and timing-reporting information for final timing closure.
Where can I download the LC4064C-5T100C datasheet PDF?
The LC4064C-5T100C datasheet can be accessed through the Lattice Semiconductor datasheet listing and the associated PDF-hosting result for this exact part number. The manufacturer document is titled “3.3V/2.5V/1.8V In-System Programmable SuperFAST High Density PLDs.” Use the pin-description table, electrical-characteristics section, and package drawings in that document when assigning PCB land patterns and verifying operating limits.
Where can I find the LC4064C-5T100C pinout?
The LC4064C-5T100C pinout is defined in the Lattice Semiconductor datasheet under the TQFP-100 package pin-description and pinout tables. The device uses 100 numbered package positions, including supply, ground, configuration, clock, and programmable I/O assignments. Follow the numbered drawing and package orientation mark when assigning PCB pads; do not infer the pinout from the MPN alone.
Is LC4064C-5T100C suitable for industrial control applications?
The LC4064C-5T100C is suitable for deterministic control and interface logic when its electrical limits, configuration method, and timing support the operating environment. Its in-system programmability allows control sequences, state machines, interface decoding, and auxiliary logic to be consolidated in one CPLD. Confirm the exact temperature grade, supply tolerances, I/O standards, and AEC-Q100 status from the manufacturer documentation before assigning it to a safety- or automotive-related design.
What is the best drop-in replacement for LC4064C-5T100C?
The closest drop-in candidates are same-family LC4064 variants that retain the 100-pin TQFP footprint, such as LC4064C-5TN100C, LC4064C-5T100I, and LC4064V-5T100C, subject to their individual voltage, temperature, timing, and configuration ratings. No verified cross-brand, pin-compatible replacement was identified. A valid substitution must be checked against the complete pin-description table, configuration interface, electrical limits, and required programming file.
Can LC4064C-5T100I replace LC4064C-5T100C?
LC4064C-5T100I can be considered as a same-family package-compatible candidate for LC4064C-5T100C because both use the 100-pin TQFP naming and LC4064C family designation. The C suffix identifies the commercial temperature class, while I identifies the industrial class. Before replacement, verify that the alternative supports every required supply voltage and I/O standard, that its configuration method remains compatible, and that all critical AC timing constraints remain satisfied.
LC4064C-5T100C vs LC4064V-5T100C — which is better for an interface design?
Choose LC4064C-5T100C when the design specifically targets the LC4064C device architecture and its documented voltage support. Choose LC4064V-5T100C only after comparing the complete electrical tables, configuration procedure, pin functions, and timing requirements. Both candidates use the -5 performance class and 100-pin package designation, but family-level naming alone does not guarantee that an existing configuration file or board-level interface can be transferred without validation.
When should I choose LC4064C-5T100C over LC4064B-5T100C?
Choose LC4064C-5T100C when the design is assigned to the LC4064C family and requires its documented multi-voltage operation or architecture. Consider LC4064B-5T100C only if an engineering review confirms equivalent logic resources, pin functions, configuration behavior, electrical limits, and timing. Although both carry the -5 speed designation and 100-pin package code, the B and C family suffixes can denote different device revisions or architectures that are not automatically interchangeable.
Is LC4064C-5T100C the same as LC4064ZE-5TN100C?
No. LC4064C-5T100C and LC4064ZE-5TN100C are not automatically equivalent despite both appearing in comparison listings and using a 100-pin package designation. The family, suffix, and operating-grade codes differ, and the ZE designation requires separate examination of its electrical and functional characteristics. Treat this as a redesign candidate until the manufacturer pin tables, timing data, supply requirements, configuration method, and required programming file have been matched.
What is the best cross-brand equivalent for LC4064C-5T100C?
No verified cross-brand equivalent was identified for the LC4064C-5T100C. A valid replacement must provide the same 100-pin TQFP land pattern, compatible I/O and supply assignments, an equivalent configuration interface, and timing that satisfies every critical path. Use the Request a Quote form on this page when seeking sourcing support for the original device or a reviewed same-family substitute, and request the manufacturer documentation before committing a substitute.
Where to buy LC4064C-5T100C online?
Use the Request a Quote form on this page to request the LC4064C-5T100C and confirm current availability, order quantity, packaging, and delivery information. Because this CPLD is a discontinued Lattice Semiconductor device, a current stock position should be confirmed rather than assumed. Include your required quantity, acceptable date codes, target package form, and programming-file status with the request.
What is the lead time for LC4064C-5T100C?
The current lead time for LC4064C-5T100C depends on remaining factory or authorized-channel inventory and should be confirmed through the Request a Quote form on this page. For an end-of-life programmable device, quantity breaks and delivery schedules can change with the available lot. Provide your annual usage and scheduled build dates when requesting a quote so the supplier can quote the most relevant packaged quantity and schedule.
Is LC4064C-5T100C in stock?
LC4064C-5T100C stock status should be confirmed through the Request a Quote form on this page. The LC4064C family is discontinued, so inventory may be limited and can vary by lot, package form, and shipment location. Include the required quantity and target date in the request. Do not begin a new production build without confirmed allocation, date-code information, and a complete incoming-inspection plan.

엔지니어링 참조 데이터: LC4064C-5T100C — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose LC4064C-5T100C when maintaining an existing LC4064C-based PCB, preserving the established configuration workflow, and retaining the commercial C temperature-grade requirement. LC4064C-5T100I is the preferred same-family option when industrial-temperature coverage is required, provided its electrical limits and supply behavior match. LC4064C-5TN100C can be evaluated when the N temperature class is suitable and the complete device ratings remain acceptable. LC4064V-5T100C may suit a compatible interface design after architecture, configuration, and timing checks, while LC4064B-5T100C requires closer scrutiny because the family revision may alter logic behavior. Use LC4064ZE-5TN100C only after a full electrical and functional comparison. For all options, confirm the TQFP-100 footprint, pin assignments, programming file, I/O standards, timing margins, and lifecycle supply plan before releasing a new production build.

대체품과의 비교

파라미터 이 제품 LC4064C-5TN100C LC4064C-5T100I LC4064V-5T100C LC4064B-5T100C LC4064ZE-5TN100C
Brand Lattice Semiconductor Corporation Lattice Semiconductor Corporation Lattice Semiconductor Corporation Lattice Semiconductor Corporation Lattice Semiconductor Corporation Lattice Semiconductor Corporation
Package TQFP-100 TQFP-100 TQFP-100 TQFP-100 TQFP-100 TQFP-100
Device Family LC4064C LC4064C LC4064C LC4064V LC4064B LC4064ZE
Nominal Speed Suffix -5 -5 -5 -5 -5 -5
Temperature Grade Suffix C N I C C N

주요 차별점

  • Direct selection of the LC4064C architecture and C temperature grade (vs LC4064C-5T100I)
  • Maintains the nominal 5 ns speed class across the closest family candidates (vs LC4064V-75TN100C)
  • Uses the standard LC4064C family designation for the intended configuration workflow (vs LC4064ZE-5TN100C)

설계 노트

Do not treat every LC4064 suffix variant as interchangeable. The C, V, B, and ZE family codes can identify different architectures, while the N, I, and C suffix codes identify environmental grades. Before substitution, compare the complete pin-description table, configuration interface, supply requirements, programmable logic capacity, AC timing, and package drawings. A matching TQFP-100 footprint establishes mechanical compatibility only; it does not by itself establish functional or electrical interchangeability.

Route the configuration and programming signals according to the Lattice layout guidance and keep them away from sensitive analog or high-speed nets. Place required bypass capacitors close to their associated supply and ground pins, with short return paths and a quiet ground-plane strategy. Because this is a 100-pin fine-pitch TQFP, use the manufacturer land pattern dimensions and check solder-mask, paste, and assembly tolerances rather than constructing a footprint solely from the generic package name.

The LC4064C family supports 3.3 V, 2.5 V, and 1.8 V environments, but each rail has distinct operating limits and configuration behavior. Confirm the exact core and I/O supply arrangement, sequencing requirements, input thresholds, output-drive limits, and I/O standard from the manufacturer electrical tables. Do not assume that a neighboring 3.3 V peripheral can be connected directly to a 2.5 V or 1.8 V section without checking voltage tolerance and configuration settings.

For an end-of-life design, preserve the programmed configuration file, its checksum, the device programmer settings, and the package orientation documentation. Use a hardware configuration checksum or equivalent monitoring scheme so a failed or incomplete configuration is detected before control outputs become active. When moving to a substitute device, generate and inspect a fresh timing report rather than assuming that an identical -5 suffix preserves the original design’s timing margin.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The LC4064C family is identified as discontinued. Specific environmental, lead-free, halogen-free, and conflict-minerals declarations were not confirmed in the cited product records and require manufacturer documentation for the exact device.

관련 검색

LC4064C-5T100C datasheet LC4064C-5T100C pinout LC4064C-5T100C datasheet pdf LC4064C-5T100C equivalent LC4064C-5T100C replacement LC4064C-5T100C cross reference LC4064C-5T100C TQFP-100 LC4064C-5T100C price LC4064C-5T100C stock Lattice LC4064C-5T100C LC4064C-5T100C vs LC4064V-5T100C LC4064C-5T100C configuration

관련 부품 & 용어

Lattice Semiconductor Corporation LC4064C-5T100C LC4064C-5TN100C LC4064C-5T100I LC4064V-5T100C LC4064B-5T100C LC4064ZE-5TN100C LC4064V-75TN100C CPLD complex programmable logic device PLD programmable logic device semiconductor in-system programming SuperFAST TQFP-100 TQFP package family surface mount SMD 3.3 V 2.5 V 1.8 V nominal 5 ns speed grade digital logic synthesis industrial control data acquisition communication interface embedded control test and measurement
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기