Lattice Semiconductor

LC4064V-25T44C - 64-Macro, 2.5ns CPLD | Lattice Semiconductor

N.º de pieza: LC4064V-25T44C ✗ Fin de vida
3.3 V, 2.5 V, and 1.8 V Vdss 44-pin TQFP Package 2.5 ns Speed
MOQ: 1 |

LC4064V-25T44C Descripción general

The Lattice Semiconductor LC4064V-25T44C is a 64-macro-cell complex programmable logic device in a 44-pin TQFP package, with a 2.5 ns indicated speed designation and support for 3.3 V, 2.5 V, and 1.8 V supply options. It belongs to the ispMACH 4000 family of SuperFAST high-density programmable logic devices and combines the ispLSI 2000 and ispMACH 4A architectures.

A CPLD is a user-programmable digital logic device organized around interconnected macro cells, programmable interconnect resources, and I/O structures. Positioned as a complex programmable logic device, it bridges the gap between simple programmable logic arrays and larger FPGAs. This hierarchy places the LC4064V within programmable logic, then programmable-logic devices, and finally the broader semiconductor category.

The device provides 64 macro cells, a 2.5 ns speed designation, and a 44-pin TQFP package. The ispMACH 4000 architecture supports in-system programmability, allowing a circuit to be configured through its programming interface without being removed from its assembled PCB. The family supports multiple nominal supply options of 3.3 V, 2.5 V, and 1.8 V, enabling designers to match the device to different logic-system power requirements.

The SuperFAST designation reflects a design intended for higher logic performance than conventional CPLDs. Its macro-cell architecture supports the implementation of combinational and registered logic used for control, decoding, interface translation, address handling, and glue logic. The 44-pin TQFP package also provides a surface-mount option for compact programmable-logic assemblies, although the physical footprint and pin assignments must be checked against the manufacturer pin table before layout release.

Typical uses include industrial control logic, peripheral-interface controllers, data-format converters, sequencers, and system-level control blocks. Because the part is obsolete according to distributor lifecycle information, it is most appropriate for maintenance of existing equipment, replication of an established board, or a design where the exact archived device and its programmed configuration are required.

For new layouts, preserve the original power, ground, programming, and I/O routing conventions of the LC4064V-25T44C. Do not substitute a different package or a device with different I/O assignments without checking the pin description and programming configuration. Confirm the obsolete-part sourcing status and availability before committing production quantities.

This page combines the device identity, lifecycle status, package information, pin-compatible family options, and application guidance to support obsolete CPLD maintenance and replacement planning. It also distinguishes documented electrical facts from parameters that require confirmation from the manufacturer datasheet before a new PCB or safety-related production release.

Alternativas directas para LC4064V-25T44C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

LC4064V-25TN44C

✅ Sustitución directa
📦 TQFP-44
Same 44-pin TQFP footprint and 2.5 ns speed designation; suffix-specific temperature, package, or qualification differences must be checked.

📋 Alternativa de referencia (no en el catálogo)

LC4064V-10TN44C

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 TQFP-44
Same 44-pin TQFP family footprint and 64-macro-cell resource class, but the 10 designation differs from the target 25 speed code by 15 ns.

📋 Alternativa de referencia (no en el catálogo)

LC4064V-33TN44C

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 TQFP-44
Same 44-pin TQFP family footprint and 64-macro-cell resource class, but the 33 designation differs from the target 25 speed code by 8 ns.

📋 Alternativa de referencia (no en el catálogo)

LC4064V-50TN44C

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 TQFP-44
Same 44-pin TQFP family footprint and 64-macro-cell resource class, but the 50 designation differs from the target 25 speed code by 25 ns.

📋 Alternativa de referencia (no en el catálogo)

LC4064V-75TN44C

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 TQFP-44
Same 44-pin TQFP family footprint and 64-macro-cell resource class, but the 75 designation differs from the target 25 speed code by 50 ns.

📋 Alternativa de referencia (no en el catálogo)

LC4064V-25T44C Valores máximos y características eléctricas

Device Type Complex Programmable Logic Device (CPLD)
Product Family ispMACH 4000 SuperFAST High-Density PLD
Macro Cell Count 64 macro cells
Speed Designation 2.5 ns
Maximum Frequency 454.5 MHz
Encapsulado 44-pin TQFP
Package Body Size 0.8 mm pitch
Programming Type In-System Programmable
Supported Supply Options 3.3 V, 2.5 V, and 1.8 V
Tipo de montaje Surface Mount
Product Temperature Designator C suffix
Estado del ciclo de vida Obsolete

Guía de configuración de pines de LC4064V-25T44C 0.8 mm pitch

Configuración de pines para LC4064V-25T44C (encapsulado 0.8 mm pitch). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 0.8 mm pitch para LC4064V-25T44C

No hay datos detallados de patillaje disponibles para LC4064V-25T44C.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

LC4064V-25T44C es adecuado para 6 aplicacións: Industrial Control Logic, Peripheral Interface Control, Address Decoding and Glue Logic, Data Acquisition Conditioning, Communication Equipment Control, Test and Measurement Equipment.

🏭

Industrial Control Logic

The LC4064V-25T44C fits legacy industrial control equipment where compact, reprogrammable logic is needed for sequencing, interlock evaluation, and command decoding. Its 64 macro cells provide configurable combinational and registered logic, while the 2.5 ns speed designation supports timing designs built around the original ispMACH 4000 architecture. The 44-pin TQFP package fits the established control-board footprint. Because the device is obsolete, maintenance programs should preserve its exact ordering suffix, programming file, and tested supply configuration rather than adopting an unchecked faster grade. Confirm operating-temperature requirements and I/O direction against the datasheet before qualification.

🔧

Peripheral Interface Control

The LC4064V-25T44C can implement peripheral-interface controllers, protocol state machines, and data-format converters in compact embedded platforms. Sixty-four macro cells allow multiple registered state elements and combinational decode functions to be consolidated in one programmable device, while in-system programmability supports configuration during board test or field update procedures. The 2.5 ns part designation preserves the timing class of the original design, and the 44-pin TQFP package avoids introducing a new footprint. For retrofit programs, validate signal timing, I/O standards, and the original configuration file. A faster family grade may alter internal timing margins and should not be installed solely on package similarity.

🖥️

Address Decoding and Glue Logic

The LC4064V-25T44C is appropriate for address decoding, bus arbitration, interrupt routing, and board-level glue logic in systems designed around the ispMACH 4000 family. Its 64 macro cells can consolidate multiple decode and register functions, while the 2.5 ns designation supports the timing assumptions of an existing control interface. The 44-pin TQFP package makes it practical to reproduce an obsolete board without changing its mechanical footprint. During maintenance, verify every power pin and I/O direction from the datasheet, preserve the original configuration, and run timing tests across voltage and temperature. Faster alternatives may consume different dynamic power or change board timing and therefore require design review.

🧩

Data Acquisition Conditioning

The LC4064V-25T44C can support legacy data-acquisition systems by implementing channel sequencing, control-word generation, status decoding, and data-format conversion. The device's 64 macro cells allow control functions to be consolidated close to sensors and converters, reducing the amount of separate fixed-function glue logic. Its 2.5 ns speed designation and in-system programmability support deterministic control and board-level configuration. The 44-pin TQFP package is useful for repairing existing acquisition hardware. Engineers should verify voltage compatibility, input thresholds, output timing, and operating temperature for the target installation. For safety or calibration-critical equipment, preserve the approved device and configuration rather than substituting an unverified family speed grade.

🌐

Communication Equipment Control

The LC4064V-25T44C can implement command framing, line-control sequencing, status multiplexing, and fault-handling logic in older communication equipment. Sixty-four macro cells support a compact combination of registered and combinational functions, while the 2.5 ns speed designation preserves the original timing class. The 44-pin TQFP package allows board-level maintenance without a footprint conversion. Production reuse requires careful attention to programming-file retention, device marking, and condition because the CPLD is obsolete. Verify that replacement candidates expose the same programming interface, supply rails, and I/O behavior. A package-compatible but faster part can change power behavior and timing margins, so it requires board-level validation.

📺

Test and Measurement Equipment

The LC4064V-25T44C is suitable for maintaining legacy test and measurement instruments that use it for panel decoding, trigger routing, mode selection, and sequencing. The 64-macro-cell device provides enough configurable logic to consolidate multiple control functions, and the 2.5 ns speed designation supports deterministic control paths. Its 44-pin TQFP package matches established instrument boards. Since the part is obsolete, repair documentation should record the exact suffix, configuration data, and inspection requirements. Confirm supply-voltage tolerances and I/O signal integrity with the manufacturer datasheet. Same-package alternatives should be evaluated for timing margin, power behavior, and programming-device support rather than selected solely by footprint compatibility.

Where can I download the LC4064V-25T44C datasheet PDF?
The LC4064V-25T44C datasheet is available through the linked Lattice Semiconductor datasheet mirror. The document identifies the part as a 64-macro-cell ispMACH 4000 SuperFAST CPLD in a 44-pin TQFP package and describes 3.3 V, 2.5 V, and 1.8 V in-system programmable devices. Use the manufacturer pin-description table and electrical-characteristics sections when assigning PCB tracks or checking operating limits.
What is the LC4064V-25T44C and what does it do?
The LC4064V-25T44C is a 64-macro-cell complex programmable logic device with a 2.5 ns speed designation in a 44-pin TQFP package. It belongs to Lattice Semiconductor's ispMACH 4000 SuperFAST family and supports in-system programming. The device is used to implement configurable combinational, registered, control, decoding, and interface logic in compact embedded systems.
Is the LC4064V-25T44C active or obsolete?
The LC4064V-25T44C is listed as obsolete and no longer manufactured by distributor lifecycle information. The device was designed for maintenance of systems built around the ispMACH 4000 architecture. For new production, confirm archival availability and inspect the device carefully for condition, traceability, and programming compatibility before committing it to a new assembly.
Where can I buy the LC4064V-25T44C?
Use the Request a Quote form on this page to ask about LC4064V-25T44C availability, condition, minimum order quantity, and delivery. Because the part is obsolete, a quotation should specify whether the requirement is for an exact programmed or unprogrammed device. Obtain written confirmation of device condition and inspect the shipping configuration before authorizing production use.
What is the price of the LC4064V-25T44C?
The current commercial price for the LC4064V-25T44C should be requested through the Request a Quote form on this page. Obsolete programmable-logic inventory can vary by programmed state, package condition, traceability, and quantity. The form allows the request to state those requirements without relying on a static price that may not represent available inventory.
What is the lead time for the LC4064V-25T44C?
The current lead time for the LC4064V-25T44C must be confirmed through the Request a Quote form on this page. Lifecycle and availability for an obsolete CPLD can change more quickly than for an active component, so request a delivery commitment for the exact quantity. Also specify whether the device must be programmed, tested, or supplied as an unprogrammed original component.
Is the LC4064V-25T44C in stock?
Stock status should be confirmed through the Request a Quote form on this page rather than inferred from an obsolete-part catalog entry. When requesting the LC4064V-25T44C, specify the required quantity and whether the device must be new, programmed, or traceable. Firm availability is assigned to the individual inventory lot and may differ between package and programming configurations.
LC4064V-25T44C vs LC4064V-25TN44C — which is the better replacement?
The LC4064V-25TN44C is the closest documented same-speed, same-44-pin-TQFP alternative because it retains the 25 designation and 2.5 ns speed class. It should be selected only after checking its temperature suffix, ordering code, supply options, and programming-device compatibility against the original design. The LC4064V-25TN44C product listing identifies the ispMACH 4000V family with 64 macro cells and 3.3 V operation.
What is the difference between LC4064V-25T44C and LC4064V-25TN44C?
Both parts are identified with 64 macro cells, a 2.5 ns speed designation, and a 44-pin TQFP format, but their ordering suffixes may encode different manufacturing, temperature, or packaging information. The comparison should therefore verify the exact datasheet ordering table, temperature grade, supply configuration, and programming file compatibility. Do not infer interchangeability from the shared family name and speed code alone.
When should I choose the LC4064V-25T44C over a faster speed grade?
Choose the exact LC4064V-25T44C when preserving an existing system's timing margin, bill of materials, or approved component configuration is more important than obtaining a current active-family option. Its 2.5 ns designation matches the documented LC4064V-25TN44C alternative, while faster ispMACH 4000V grades may alter timing, power, qualification, and sourcing assumptions. Validate every change against the original timing and thermal analysis.
Is the LC4064V-25T44C suitable for industrial control systems?
The LC4064V-25T44C can be suitable for industrial control applications requiring the documented 64 macro cells, 2.5 ns speed designation, and in-system programmability. Its C suffix requires confirmation against the manufacturer ordering table before the part is used in a temperature- or qualification-sensitive design. The device is obsolete, so long-term availability and change-control requirements should be addressed before production release.
What can replace the LC4064V-25T44C?
The LC4064V-25TN44C is the leading documented drop-in candidate because it preserves the 44-pin TQFP package and 2.5 ns speed designation. Faster same-family speed grades may fit the footprint, but their timing and operating conditions must be reviewed because a lower timing number represents a different performance class. No verified cross-brand drop-in equivalent was established, so the replacement decision should remain within the documented Lattice family.
Is there a cross-brand drop-in replacement for the LC4064V-25T44C?
No verified cross-brand drop-in replacement was identified for the LC4064V-25T44C. A true replacement must retain the 44-pin TQFP footprint, compatible I/O and power pins, suitable voltage support, adequate macro-cell resources, and compatible programming behavior. Cross-family devices with similar macro-cell counts are not automatically interchangeable, even when their package dimensions appear similar.
Where can I find the LC4064V-25T44C pinout?
Use the pin-description table in the LC4064V-25T44C manufacturer datasheet to locate every power, ground, I/O, and programming signal. The device uses a 44-pin TQFP package, but the precise counter-clockwise pin numbering and exposed-pad treatment must be copied from the datasheet rather than reconstructed from the package family. A complete production pin table could not be established from the available search results.
What are the key specifications of LC4064V-25T44C that engineers should know?
The LC4064V-25T44C combines 64 macro cells, a 2.5 ns speed designation, a maximum-frequency figure of 454.5 MHz, in-system programmability, and a 44-pin TQFP package with 0.8 mm pitch. The ispMACH 4000 family supports 3.3 V, 2.5 V, and 1.8 V supply options. These facts position it for compact control, decode, sequencing, and interface logic, subject to confirming operating limits in the datasheet.

Datos de referencia de ingeniería para LC4064V-25T44C — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the exact LC4064V-25T44C when repairing or cloning an existing ispMACH 4000 design whose BOM specifies a 64-macro-cell, 2.5 ns device in a 44-pin TQFP. The LC4064V-25TN44C is the first alternative to evaluate because it preserves the documented speed code and package; confirm suffix-specific temperature, programming, and supply details before substitution. Same-family speed grades can retain the footprint but may alter timing and power behavior, so they require schematic, timing, and qualification review. Do not use a 48-pin or other package-size variant as a direct drop-in choice. For new designs, an active programmable-logic family is generally preferable, but the obsolete target remains appropriate for legacy maintenance where exact configuration, timing, and supply behavior must be preserved.

Comparación con alternativas

Parámetro Este producto LC4064V-25TN44C LC4064V-10TN44C LC4064V-33TN44C LC4064V-50TN44C LC4064V-75TN44C
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package 44-pin TQFP 44-pin TQFP 44-pin TQFP 44-pin TQFP 44-pin TQFP 44-pin TQFP
Macro Cell Count 64 macro cells 64 macro cells 64 macro cells 64 macro cells 64 macro cells 64 macro cells
Speed Designation 2.5 ns 2.5 ns 1.0 ns 3.3 ns 5.0 ns 7.5 ns

Diferenciadores clave

  • Closest documented same-speed package alternative (frente a LC4064V-25TN44C)
  • Original 2.5 ns timing class retained (frente a LC4064V-10TN44C)
  • Closer timing match than slower family options (frente a LC4064V-33TN44C)
  • Compact 44-pin surface-mount implementation (frente a LC4064V-25T48C)

Notas de diseño

Do not treat a shared TQFP outline as sufficient proof of drop-in compatibility. Verify the pin-number sequence, power rails, ground connections, I/O directions, and programming interface against the manufacturer datasheet. Pay particular attention to the C, N, and other ordering suffixes because they may identify different commercial, temperature, or packaging variants. For an obsolete board, preserve the original configuration file and document the exact installed device marking.

Reuse the existing 44-pin TQFP land pattern rather than creating a new footprint from package dimensions alone. Confirm pin 1 orientation, courtyard clearance, solder-mask definition, and pin pitch from the manufacturer package drawing. Inspect an existing assembled board for rework damage or lifted pads before placing the replacement. For a newly created board, maintain a defined programming interface and accessible power rails that meet the datasheet sequencing requirements.

Validate every replaced I/O path with the original clock, control, and data signals in the target system. A faster or slower family grade can change propagation delay and timing margins even when the package and logic resource count match. Use the manufacturer timing models and worst-case corner analysis, then test the board across its intended voltage and temperature range. Do not assume that a different speed suffix is timing-neutral.

Confirm the correct supply voltage and decoupling arrangement from the manufacturer datasheet before energizing a reused board. The ispMACH 4000 family is associated with 3.3 V, 2.5 V, and 1.8 V options, but the installed ordering suffix determines the applicable configuration. Check input voltage limits, power-up behavior, and output-drive requirements against the original schematic. Replacement programming should occur only within the device's specified supply conditions.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The searchable product information does not establish the required compliance status for the exact obsolete ordering suffix. AEC-Q100 is not applicable because the device is an industrial or commercial programmable-logic IC rather than an automotive-qualified device.

Datos verificados el: 2026-11-15 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

lc4064v datasheet LC4064V-25T44C datasheet LC4064V-25T44C pinout LC4064V-25T44C datasheet pdf LC4064V-25T44C equivalent LC4064V-25T44C replacement LC4064V-25T44C cross reference LC4064V-25T44C footprint LC4064V-25T44C price LC4064V-25T44C stock Lattice LC4064V-25T44C LC4064V-25T44C vs LC4064V-25TN44C LC4064V 64 macro CPLD LC4064V TQFP-44 replacement LC4064V industrial control logic

Componentes & términos relacionados

Lattice Semiconductor LC4064V-25T44C LC4064V-25TN44C LC4064V-10TN44C LC4064V-33TN44C LC4064V-50TN44C LC4064V-75TN44C LC4064V-25T48C ispMACH 4000 ispMACH 4000V ispLSI 2000 ispMACH 4A CPLD complex programmable logic device programmable logic device FPGA semiconductor macro cell in-system programming SuperFAST TQFP-44 TQFP package family surface-mount package SMD 454.5 MHz 2.5 ns speed designation industrial control address decoding RoHS REACH
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ