LC4064V-25T44C - 64-Macro, 2.5ns CPLD | Lattice Semiconductor
MPN: LC4064V-25T44C ✗ Akhir HidupLC4064V-25T44C Ringkasan
A CPLD is a user-programmable digital logic device organized around interconnected macro cells, programmable interconnect resources, and I/O structures. Positioned as a complex programmable logic device, it bridges the gap between simple programmable logic arrays and larger FPGAs. This hierarchy places the LC4064V within programmable logic, then programmable-logic devices, and finally the broader semiconductor category.
The device provides 64 macro cells, a 2.5 ns speed designation, and a 44-pin TQFP package. The ispMACH 4000 architecture supports in-system programmability, allowing a circuit to be configured through its programming interface without being removed from its assembled PCB. The family supports multiple nominal supply options of 3.3 V, 2.5 V, and 1.8 V, enabling designers to match the device to different logic-system power requirements.
The SuperFAST designation reflects a design intended for higher logic performance than conventional CPLDs. Its macro-cell architecture supports the implementation of combinational and registered logic used for control, decoding, interface translation, address handling, and glue logic. The 44-pin TQFP package also provides a surface-mount option for compact programmable-logic assemblies, although the physical footprint and pin assignments must be checked against the manufacturer pin table before layout release.
Typical uses include industrial control logic, peripheral-interface controllers, data-format converters, sequencers, and system-level control blocks. Because the part is obsolete according to distributor lifecycle information, it is most appropriate for maintenance of existing equipment, replication of an established board, or a design where the exact archived device and its programmed configuration are required.
For new layouts, preserve the original power, ground, programming, and I/O routing conventions of the LC4064V-25T44C. Do not substitute a different package or a device with different I/O assignments without checking the pin description and programming configuration. Confirm the obsolete-part sourcing status and availability before committing production quantities.
This page combines the device identity, lifecycle status, package information, pin-compatible family options, and application guidance to support obsolete CPLD maintenance and replacement planning. It also distinguishes documented electrical facts from parameters that require confirmation from the manufacturer datasheet before a new PCB or safety-related production release.
Alternatif penggantian untuk LC4064V-25T44C — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
LC4064V-25TN44C
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LC4064V-10TN44C
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LC4064V-33TN44C
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LC4064V-50TN44C
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LC4064V-75TN44C
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LC4064V-25T44C Rating Maksimal & Karakteristik Listrik
| Device Type | Complex Programmable Logic Device (CPLD) |
| Product Family | ispMACH 4000 SuperFAST High-Density PLD |
| Macro Cell Count | 64 macro cells |
| Speed Designation | 2.5 ns |
| Maximum Frequency | 454.5 MHz |
| Paket | 44-pin TQFP |
| Package Body Size | 0.8 mm pitch |
| Programming Type | In-System Programmable |
| Supported Supply Options | 3.3 V, 2.5 V, and 1.8 V |
| Tipe Mounting | Surface Mount |
| Product Temperature Designator | C suffix |
| Status Lingkungan Hidup | Obsolete |
LC4064V-25T44C 0.8 mm pitch Diamant Konfigurasi Panduan
Konfigurasi pin untuk LC4064V-25T44C (0.8 mm pitch pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk LC4064V-25T44C.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
LC4064V-25T44C cocok untuk 6 aplikasis: Industrial Control Logic, Peripheral Interface Control, Address Decoding and Glue Logic, Data Acquisition Conditioning, Communication Equipment Control, Test and Measurement Equipment.
Industrial Control Logic
The LC4064V-25T44C fits legacy industrial control equipment where compact, reprogrammable logic is needed for sequencing, interlock evaluation, and command decoding. Its 64 macro cells provide configurable combinational and registered logic, while the 2.5 ns speed designation supports timing designs built around the original ispMACH 4000 architecture. The 44-pin TQFP package fits the established control-board footprint. Because the device is obsolete, maintenance programs should preserve its exact ordering suffix, programming file, and tested supply configuration rather than adopting an unchecked faster grade. Confirm operating-temperature requirements and I/O direction against the datasheet before qualification.
Direkomendasikan
Peripheral Interface Control
The LC4064V-25T44C can implement peripheral-interface controllers, protocol state machines, and data-format converters in compact embedded platforms. Sixty-four macro cells allow multiple registered state elements and combinational decode functions to be consolidated in one programmable device, while in-system programmability supports configuration during board test or field update procedures. The 2.5 ns part designation preserves the timing class of the original design, and the 44-pin TQFP package avoids introducing a new footprint. For retrofit programs, validate signal timing, I/O standards, and the original configuration file. A faster family grade may alter internal timing margins and should not be installed solely on package similarity.
Direkomendasikan
Address Decoding and Glue Logic
The LC4064V-25T44C is appropriate for address decoding, bus arbitration, interrupt routing, and board-level glue logic in systems designed around the ispMACH 4000 family. Its 64 macro cells can consolidate multiple decode and register functions, while the 2.5 ns designation supports the timing assumptions of an existing control interface. The 44-pin TQFP package makes it practical to reproduce an obsolete board without changing its mechanical footprint. During maintenance, verify every power pin and I/O direction from the datasheet, preserve the original configuration, and run timing tests across voltage and temperature. Faster alternatives may consume different dynamic power or change board timing and therefore require design review.
Direkomendasikan
Data Acquisition Conditioning
The LC4064V-25T44C can support legacy data-acquisition systems by implementing channel sequencing, control-word generation, status decoding, and data-format conversion. The device's 64 macro cells allow control functions to be consolidated close to sensors and converters, reducing the amount of separate fixed-function glue logic. Its 2.5 ns speed designation and in-system programmability support deterministic control and board-level configuration. The 44-pin TQFP package is useful for repairing existing acquisition hardware. Engineers should verify voltage compatibility, input thresholds, output timing, and operating temperature for the target installation. For safety or calibration-critical equipment, preserve the approved device and configuration rather than substituting an unverified family speed grade.
Direkomendasikan
Communication Equipment Control
The LC4064V-25T44C can implement command framing, line-control sequencing, status multiplexing, and fault-handling logic in older communication equipment. Sixty-four macro cells support a compact combination of registered and combinational functions, while the 2.5 ns speed designation preserves the original timing class. The 44-pin TQFP package allows board-level maintenance without a footprint conversion. Production reuse requires careful attention to programming-file retention, device marking, and condition because the CPLD is obsolete. Verify that replacement candidates expose the same programming interface, supply rails, and I/O behavior. A package-compatible but faster part can change power behavior and timing margins, so it requires board-level validation.
Direkomendasikan
Test and Measurement Equipment
The LC4064V-25T44C is suitable for maintaining legacy test and measurement instruments that use it for panel decoding, trigger routing, mode selection, and sequencing. The 64-macro-cell device provides enough configurable logic to consolidate multiple control functions, and the 2.5 ns speed designation supports deterministic control paths. Its 44-pin TQFP package matches established instrument boards. Since the part is obsolete, repair documentation should record the exact suffix, configuration data, and inspection requirements. Confirm supply-voltage tolerances and I/O signal integrity with the manufacturer datasheet. Same-package alternatives should be evaluated for timing margin, power behavior, and programming-device support rather than selected solely by footprint compatibility.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk LC4064V-25T44C — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | LC4064V-25TN44C | LC4064V-10TN44C | LC4064V-33TN44C | LC4064V-50TN44C | LC4064V-75TN44C |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 44-pin TQFP | 44-pin TQFP | 44-pin TQFP | 44-pin TQFP | 44-pin TQFP | 44-pin TQFP |
| Macro Cell Count | 64 macro cells | 64 macro cells | 64 macro cells | 64 macro cells | 64 macro cells | 64 macro cells |
| Speed Designation | 2.5 ns | 2.5 ns | 1.0 ns | 3.3 ns | 5.0 ns | 7.5 ns |
Diferensiator Kunci
- Closest documented same-speed package alternative (vsLC4064V-25TN44C)
- Original 2.5 ns timing class retained (vsLC4064V-10TN44C)
- Closer timing match than slower family options (vsLC4064V-33TN44C)
- Compact 44-pin surface-mount implementation (vsLC4064V-25T48C)
Catatan Desain
Do not treat a shared TQFP outline as sufficient proof of drop-in compatibility. Verify the pin-number sequence, power rails, ground connections, I/O directions, and programming interface against the manufacturer datasheet. Pay particular attention to the C, N, and other ordering suffixes because they may identify different commercial, temperature, or packaging variants. For an obsolete board, preserve the original configuration file and document the exact installed device marking.
Reuse the existing 44-pin TQFP land pattern rather than creating a new footprint from package dimensions alone. Confirm pin 1 orientation, courtyard clearance, solder-mask definition, and pin pitch from the manufacturer package drawing. Inspect an existing assembled board for rework damage or lifted pads before placing the replacement. For a newly created board, maintain a defined programming interface and accessible power rails that meet the datasheet sequencing requirements.
Validate every replaced I/O path with the original clock, control, and data signals in the target system. A faster or slower family grade can change propagation delay and timing margins even when the package and logic resource count match. Use the manufacturer timing models and worst-case corner analysis, then test the board across its intended voltage and temperature range. Do not assume that a different speed suffix is timing-neutral.
Confirm the correct supply voltage and decoupling arrangement from the manufacturer datasheet before energizing a reused board. The ispMACH 4000 family is associated with 3.3 V, 2.5 V, and 1.8 V options, but the installed ordering suffix determines the applicable configuration. Check input voltage limits, power-up behavior, and output-drive requirements against the original schematic. Replacement programming should occur only within the device's specified supply conditions.
Informasi Konformitas
The searchable product information does not establish the required compliance status for the exact obsolete ordering suffix. AEC-Q100 is not applicable because the device is an industrial or commercial programmable-logic IC rather than an automotive-qualified device.