LFE2-50E-7F484C - 48K ECP2 FPGA, 420MHz | Lattice Semiconductor
N.º de pieza: LFE2-50E-7F484C ✗ Fin de vidaLFE2-50E-7F484C Descripción general
A field-programmable gate array is a programmable-logic semiconductor whose interconnected logic blocks, memory, and I/O can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy above fixed-function logic devices and below broader digital semiconductors. ECP2 devices sit between low-capacity programmable logic and larger FPGAs, providing moderate logic density, embedded RAM, and performance for control-plane, communications, instrumentation, and embedded-processing designs.
The ECP2 family provides 48,000 logic elements, equivalent to 48K LUTs, together with 396,288 total RAM bits. The LFE2-50E-7F484C provides 339 I/O and supports operation up to 420 MHz. These resources allow parallel datapaths, state machines, protocol handling, and control logic to be consolidated without using a separate collection of discrete logic devices.
The “-7” portion identifies the device speed grade, while the “F484C” portion identifies the 484-ball package configuration. The suffix and ordering code also convey the ordering package and temperature or grade details defined by Lattice Semiconductor. Designers should consult the manufacturer ordering guide before treating two similarly named ECP2 devices as interchangeable because package, speed grade, series, and qualification can differ.
Typical applications include industrial automation, communications infrastructure, test and measurement equipment, embedded control, and digital signal processing. The 48K logic-element capacity is especially useful when a design needs parallel interfaces or substantial state-machine logic, while the 339 I/O provide connections for external memories, converters, transceivers, and control signals.
PCB implementation requires careful attention to the dense 484-ball BGA footprint, power delivery, decoupling, and routing escape requirements. Ball assignment, voltage rails, configuration pins, and I/O constraints must be taken directly from the pin-description tables because a full pin list cannot be reconstructed safely from a distributor summary.
This page consolidates capacity, memory, I/O, frequency, package, lifecycle, and migration information into an engineering-focused comparison. It also distinguishes verified drop-in family options from broader functional alternatives and highlights the checks required before replacing an FPGA in an existing PCB design.
Alternativas directas para LFE2-50E-7F484C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con LFE2-50E-7F484C (mismo factor de forma y huella) — difiere en Core Supply Voltage, Logic Elements, Package, Speed Grade, Terminal Count.
LFE2-50SE-7F484C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LFE2-50E-7FN484C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LFE2-50SE-7FN484C
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
LFE2-50E-6F484C
✅ Sustitución directaConsulte el precio
Ver hoja de datos →LFE2-50SE-6F484C
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
LFE2-50E-7F484C Valores máximos y características eléctricas
| Device Type | ECP2 field-programmable gate array (FPGA) |
| Logic Elements | 48,000 |
| Equivalent LUT Count | 48K LUTs |
| LAB or CLB Count | 6,000 |
| Total RAM | 396,288 bits |
| Maximum Frequency | 420 MHz |
| I/O Count | 339 |
| Encapsulado | 484-BBGA, square BGA |
| Terminal Count | 484 balls |
| Speed Grade | -7 |
| Product Series | ECP2 |
| Tipo de montaje | Surface mount |
| Core Supply Voltage | 1.2 V |
Guía de configuración de pines de LFE2-50E-7F484C 484-bbga, square bga
Configuración de pines para LFE2-50E-7F484C (encapsulado 484-bbga, square bga). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para LFE2-50E-7F484C.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
LFE2-50E-7F484C es adecuado para 6 aplicacións: Industrial Automation and Control, Communications Interface Consolidation, Test and Measurement Instrumentation, Embedded Signal Processing, Programmable Interface Bridging, Embedded Control and System Management.
Industrial Automation and Control
The LFE2-50E-7F484C fits industrial controllers that require deterministic parallel logic, extensive machine interfaces, and embedded state-machine capacity. Its 48,000 logic elements, 6,000 LABs or CLBs, and 339 I/O can support motor sequencing, interlocks, sensor conditioning interfaces, counters, timers, and communications logic in one programmable device. The 420 MHz maximum operating frequency provides headroom for parallel control paths, although deployed timing should be checked against routing depth and external interface latency. Use the manufacturer pin and electrical documentation to assign isolated I/O, supply rails, clock inputs, and configuration pins.
Recomendado
Communications Interface Consolidation
The LFE2-50E-7F484C is suitable for communications equipment that must combine framing logic, buffers, status tracking, and multiple peripheral interfaces. Its 339 user I/O provide substantial connectivity for transceivers, memories, clock sources, and management signals, while 396,288 RAM bits can support packet buffers, lookup structures, or wide parallel data paths. The 48K logic-element capacity allows multiple parallel channels to be implemented without external CPLDs. Because protocol timing is sensitive to I/O delay and clock quality, a migration should preserve the original clocking scheme and rerun static timing analysis rather than relying only on the nominal 420 MHz device frequency.
Recomendado
Test and Measurement Instrumentation
The LFE2-50E-7F484C can consolidate acquisition sequencing, trigger logic, calibration tables, and instrument-control interfaces in a compact programmable-logic device. The 48K LUT-class capacity is useful for parallel measurement pipelines, while 396,288 RAM bits can implement capture buffers or working storage. Its 339 I/O allow direct connection to converters, sensors, memories, and control peripherals, subject to the electrical limits of the selected bank and package pin. For instrumentation, pay particular attention to clock jitter, input thresholds, output timing, and grounding. A lower-speed ECP2 grade may fit noncritical paths, but all timing constraints must be regenerated and closed after replacement.
Recomendado
Embedded Signal Processing
The LFE2-50E-7F484C supports parallel embedded signal-processing functions such as filtering, correlation, data conditioning, and fixed-point arithmetic when a design benefits from programmable implementation. Its 48,000 logic elements provide substantial parallel arithmetic resources, while the embedded RAM can serve coefficient, delay-line, or buffering purposes. The 420 MHz maximum frequency permits high-speed pipeline architectures, but real performance depends on placement, routing, memory inference, and I/O timing. When substituting another ECP2 grade, re-synthesize the design, review inferred-memory placement, and compare post-route timing instead of assuming that identical logic capacity produces identical performance.
Recomendado
Programmable Interface Bridging
The LFE2-50E-7F484C is useful where a system must bridge parallel buses, translate asynchronous interfaces, or adapt legacy logic to a wider digital architecture. Its 339 I/O and 48K logic-element capacity allow multiple bridge paths, control registers, and buffer logic to share one FPGA. The 396,288 RAM bits can support depth for asynchronous FIFO-style structures, while the programmable fabric enables protocol-specific behavior. Place boundary-crossing registers appropriately and apply timing constraints to every asynchronous interface. During a drop-in migration, verify that all balls used by the original bridge remain available and that bank voltage, drive strength, and I/O-standard assignments remain supported.
Recomendado
Embedded Control and System Management
The LFE2-50E-7F484C can act as a supervisory controller for complex electronic systems, coordinating resets, power sequencing, health monitoring, watchdog functions, and peripheral configuration. The 6,000 LABs or CLBs provide distributed control resources, while 339 I/O simplify connections to sensors, regulators, memories, and status indicators. Its programmable nature permits product-specific logic without a separate microcontroller or fixed-function controller. For safety-oriented monitoring, review metastability handling, clock-domain crossing, configuration behavior, and fault coverage. A replacement from the same ECP2 family still requires a fresh synthesis, pin assignment check, bitstream test, and validation of configuration and power-up behavior.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para LFE2-50E-7F484C — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | LFE2-50SE-7F484C | LFE2-50E-7FN484C | LFE2-50SE-7FN484C | LFE2-50E-6F484C | LFE2-50SE-6F484C |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 484-BBGA | 484-BBGA - same | 484-BBGA - same | 484-BBGA - same | 484-BBGA - same | 484-BBGA - same |
| Logic Capacity | 48K LUTs / 48,000 logic elements | 48K LUTs | 48K LUTs | 48K LUTs | 48K LUTs | 48K LUTs |
| I/O Count | 339 | 339 | 339 | 339 | 339 | 339 |
| Speed Grade | -7 | -7 | -7 | -7 | -6 | -6 |
| Product Series | ECP2 E-series | ECP2 S-series | ECP2 E-series | ECP2 S-series | ECP2 E-series | ECP2 S-series |
Diferenciadores clave
- Direct -7 speed-grade migration path in the same 484-BBGA footprint (frente a LFE2-50E-6F484C)
- Same package, speed grade, and 48K logic class (frente a LFE2-50E-7FN484C)
- S-series migration option preserves logic and I/O density (frente a LFE2-50SE-7F484C)
Notas de diseño
Treat the 484-BBGA as a high-density fan-out and escape-routing problem. Use the manufacturer package drawing to define pad, solder-mask, and paste geometry, and reserve clean escape paths for every power, ground, clock, configuration, and active user-I/O ball. Because the generic package library does not contain this exact BGA, the physical footprint and ball map must come from the Lattice Semiconductor package documentation rather than from a generic 484-ball symbol.
Follow the ECP2 power-supply and decoupling requirements for every voltage rail and I/O bank. Place the smallest recommended bypass capacitors directly at the relevant package balls and provide low-impedance planes or pours for core and I/O current. Bank voltage and sequencing must match the selected LFE2-50E-7F484C configuration, especially when clocks, memories, transceivers, or external converters share the board.
Do not approve a replacement based only on the 484-BBGA package and 48K LUT count. Compare the exact ball map, voltage rails, configuration pins, supported I/O standards, speed grade, package dimensions, and device features. The LFE2-50SE options can differ in series behavior, while the -6 options have less timing margin. Rebuild the bitstream, regenerate constraints, and run post-route timing and hardware tests before production release.
Preserve the original clock topology and re-evaluate every source-synchronous, chip-to-chip, and asynchronous interface during migration. The 339-I/O capacity does not guarantee that every electrical function remains interchangeable across ECP2 ordering options. Check I/O standard support, slew, drive strength, pull behavior, clock pins, and bank restrictions for both ends of each interface, then measure edge margin on assembled prototypes.
Información de cumplimiento
No device-specific compliance declarations were identified for the LFE2-50E-7F484C. Review the manufacturer material declaration and the exact ordering code before making environmental or automotive qualification claims.