Lattice Semiconductor

LFE2-50E-7F484C - 48K ECP2 FPGA, 420MHz | Lattice Semiconductor

MPN: LFE2-50E-7F484C ✗ סוף ייצור
1.2 V Vdss 484-BBGA, square BGA Package 420 MHz Speed
כמות הזמנה מינימלית: 1 |

LFE2-50E-7F484C סקירה

Lattice Semiconductor LFE2-50E-7F484C is an ECP2 field-programmable gate array with 48,000 logic elements, 396,288 RAM bits, 339 I/O, and a maximum operating frequency of 420 MHz, packaged in a 484-ball BGA. The device combines programmable logic, embedded memory, and programmable I/O in a single surface-mount semiconductor for complex digital control, interface, and signal-processing systems.

A field-programmable gate array is a programmable-logic semiconductor whose interconnected logic blocks, memory, and I/O can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy above fixed-function logic devices and below broader digital semiconductors. ECP2 devices sit between low-capacity programmable logic and larger FPGAs, providing moderate logic density, embedded RAM, and performance for control-plane, communications, instrumentation, and embedded-processing designs.

The ECP2 family provides 48,000 logic elements, equivalent to 48K LUTs, together with 396,288 total RAM bits. The LFE2-50E-7F484C provides 339 I/O and supports operation up to 420 MHz. These resources allow parallel datapaths, state machines, protocol handling, and control logic to be consolidated without using a separate collection of discrete logic devices.

The “-7” portion identifies the device speed grade, while the “F484C” portion identifies the 484-ball package configuration. The suffix and ordering code also convey the ordering package and temperature or grade details defined by Lattice Semiconductor. Designers should consult the manufacturer ordering guide before treating two similarly named ECP2 devices as interchangeable because package, speed grade, series, and qualification can differ.

Typical applications include industrial automation, communications infrastructure, test and measurement equipment, embedded control, and digital signal processing. The 48K logic-element capacity is especially useful when a design needs parallel interfaces or substantial state-machine logic, while the 339 I/O provide connections for external memories, converters, transceivers, and control signals.

PCB implementation requires careful attention to the dense 484-ball BGA footprint, power delivery, decoupling, and routing escape requirements. Ball assignment, voltage rails, configuration pins, and I/O constraints must be taken directly from the pin-description tables because a full pin list cannot be reconstructed safely from a distributor summary.

This page consolidates capacity, memory, I/O, frequency, package, lifecycle, and migration information into an engineering-focused comparison. It also distinguishes verified drop-in family options from broader functional alternatives and highlights the checks required before replacing an FPGA in an existing PCB design.

חלופות תחליף ישיר עבור LFE2-50E-7F484C — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם LFE2-50E-7F484C (אותו גורם צורה וטביעת רגל) — שונים ב Core Supply Voltage, Logic Elements, Package, Speed Grade, Terminal Count.

Lattice Semiconductor
Core Supply Voltage: 1.14 V to 1.26 V
Logic Elements: 48,000 logic elements
Package: 484-BBGA
השווה עם LFE2-50E-7F484C →

LFE2-50SE-7F484C

✅ Drop-In
📦 484-BBGA
48K LUT class retained, a 0% logic-capacity difference, and the same -7 speed designation; S-series features require validation

📋 חלופה להתייחסות (לא בקטלוג)

LFE2-50E-7FN484C

✅ Drop-In
📦 484-BBGA
48K LUT class and -7 speed designation retained, a 0% logic-capacity difference; the N ordering suffix must be checked

📋 חלופה להתייחסות (לא בקטלוג)

LFE2-50SE-7FN484C

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 484-BBGA
48K LUT class and -7 speed designation retained, a 0% logic-capacity difference; S-series and N-ordering details require validation

📋 חלופה להתייחסות (לא בקטלוג)

LFE2-50E-6F484C

✅ Drop-In
Lattice Semiconductor
📦 484-BBGA
ECP2 field-programmable gate array (FPGA) · 48,000 logic elements · 6,000 LUTs · 50,000 cells · 396,288 bits · 339 I/O · 1.14 V to 1.26 V · 1.2 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LFE2-50SE-6F484C

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 484-BBGA
48K LUT class retained, a 0% logic-capacity difference, while the speed grade changes from -7 to -6 and the device uses S-series ordering

📋 חלופה להתייחסות (לא בקטלוג)

LFE2-50E-7F484C דירוגים מרביים ומאפיינים חשמליים

Device Type ECP2 field-programmable gate array (FPGA)
Logic Elements 48,000
Equivalent LUT Count 48K LUTs
LAB or CLB Count 6,000
Total RAM 396,288 bits
Maximum Frequency 420 MHz
I/O Count 339
מארז 484-BBGA, square BGA
Terminal Count 484 balls
Speed Grade -7
Product Series ECP2
סוג הרכבה Surface mount
Core Supply Voltage 1.2 V

מדריך תצורת פינים של LFE2-50E-7F484C 484-bbga, square bga

תצורת פינים עבור LFE2-50E-7F484C (מארזת 484-bbga, square bga). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 484-bbga, square bga עבור LFE2-50E-7F484C

אין נתוני פריסת פינים מפורטים עבור LFE2-50E-7F484C.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

LFE2-50E-7F484C מתאים עבור 6 יישוםs: Industrial Automation and Control, Communications Interface Consolidation, Test and Measurement Instrumentation, Embedded Signal Processing, Programmable Interface Bridging, Embedded Control and System Management.

🏭

Industrial Automation and Control

The LFE2-50E-7F484C fits industrial controllers that require deterministic parallel logic, extensive machine interfaces, and embedded state-machine capacity. Its 48,000 logic elements, 6,000 LABs or CLBs, and 339 I/O can support motor sequencing, interlocks, sensor conditioning interfaces, counters, timers, and communications logic in one programmable device. The 420 MHz maximum operating frequency provides headroom for parallel control paths, although deployed timing should be checked against routing depth and external interface latency. Use the manufacturer pin and electrical documentation to assign isolated I/O, supply rails, clock inputs, and configuration pins.

🌐

Communications Interface Consolidation

The LFE2-50E-7F484C is suitable for communications equipment that must combine framing logic, buffers, status tracking, and multiple peripheral interfaces. Its 339 user I/O provide substantial connectivity for transceivers, memories, clock sources, and management signals, while 396,288 RAM bits can support packet buffers, lookup structures, or wide parallel data paths. The 48K logic-element capacity allows multiple parallel channels to be implemented without external CPLDs. Because protocol timing is sensitive to I/O delay and clock quality, a migration should preserve the original clocking scheme and rerun static timing analysis rather than relying only on the nominal 420 MHz device frequency.

🔧

Test and Measurement Instrumentation

The LFE2-50E-7F484C can consolidate acquisition sequencing, trigger logic, calibration tables, and instrument-control interfaces in a compact programmable-logic device. The 48K LUT-class capacity is useful for parallel measurement pipelines, while 396,288 RAM bits can implement capture buffers or working storage. Its 339 I/O allow direct connection to converters, sensors, memories, and control peripherals, subject to the electrical limits of the selected bank and package pin. For instrumentation, pay particular attention to clock jitter, input thresholds, output timing, and grounding. A lower-speed ECP2 grade may fit noncritical paths, but all timing constraints must be regenerated and closed after replacement.

📡

Embedded Signal Processing

The LFE2-50E-7F484C supports parallel embedded signal-processing functions such as filtering, correlation, data conditioning, and fixed-point arithmetic when a design benefits from programmable implementation. Its 48,000 logic elements provide substantial parallel arithmetic resources, while the embedded RAM can serve coefficient, delay-line, or buffering purposes. The 420 MHz maximum frequency permits high-speed pipeline architectures, but real performance depends on placement, routing, memory inference, and I/O timing. When substituting another ECP2 grade, re-synthesize the design, review inferred-memory placement, and compare post-route timing instead of assuming that identical logic capacity produces identical performance.

🖥️

Programmable Interface Bridging

The LFE2-50E-7F484C is useful where a system must bridge parallel buses, translate asynchronous interfaces, or adapt legacy logic to a wider digital architecture. Its 339 I/O and 48K logic-element capacity allow multiple bridge paths, control registers, and buffer logic to share one FPGA. The 396,288 RAM bits can support depth for asynchronous FIFO-style structures, while the programmable fabric enables protocol-specific behavior. Place boundary-crossing registers appropriately and apply timing constraints to every asynchronous interface. During a drop-in migration, verify that all balls used by the original bridge remain available and that bank voltage, drive strength, and I/O-standard assignments remain supported.

🧩

Embedded Control and System Management

The LFE2-50E-7F484C can act as a supervisory controller for complex electronic systems, coordinating resets, power sequencing, health monitoring, watchdog functions, and peripheral configuration. The 6,000 LABs or CLBs provide distributed control resources, while 339 I/O simplify connections to sensors, regulators, memories, and status indicators. Its programmable nature permits product-specific logic without a separate microcontroller or fixed-function controller. For safety-oriented monitoring, review metastability handling, clock-domain crossing, configuration behavior, and fault coverage. A replacement from the same ECP2 family still requires a fresh synthesis, pin assignment check, bitstream test, and validation of configuration and power-up behavior.

סיכום מוצרים מומלצים

LFE2-50SE-7F484C same-footprint ECP2 migration candidate בשימוש ב-: Industrial Automation and Control, Test and Measurement Instrumentation, Programmable Interface Bridging LFE2-50E-6F484C Lattice Semiconductor בשימוש ב-: Industrial Automation and Control, Test and Measurement Instrumentation, Embedded Signal Processing, Embedded Control and System Management LFE2-50E-7FN484C same-package ECP2 ordering alternative בשימוש ב-: Communications Interface Consolidation, Programmable Interface Bridging LFE2-50SE-7FN484C same-footprint S-series migration candidate בשימוש ב-: Communications Interface Consolidation, Embedded Control and System Management LFE2-50SE-6F484C same-package lower-speed migration candidate בשימוש ב-: Embedded Signal Processing
What is the LFE2-50E-7F484C?
The LFE2-50E-7F484C is a Lattice Semiconductor ECP2 field-programmable gate array with 48,000 logic elements, 396,288 RAM bits, 339 I/O, and a maximum frequency of 420 MHz. It is packaged in a 484-BBGA. According to the manufacturer ECP2 documentation, this device combines programmable logic and embedded RAM for complex embedded, communications, control, and signal-processing designs.
How much logic and memory does the LFE2-50E-7F484C contain?
The LFE2-50E-7F484C contains 48,000 logic elements organized into 6,000 LABs or CLBs and provides 396,288 total RAM bits. Its logic capacity is commonly described as 48K LUTs. These figures make the device suitable for parallel datapaths, protocol engines, control state machines, and designs requiring more programmable logic than a basic CPLD.
What is the maximum operating frequency of the LFE2-50E-7F484C?
The LFE2-50E-7F484C has a maximum operating frequency of 420 MHz. According to the Lattice Semiconductor product information, the -7 suffix identifies its speed grade. The 420 MHz figure describes the device's maximum stated operating frequency; a practical design may operate below that limit because of routing, logic depth, I/O standards, timing constraints, and board-level conditions.
Where can I download the LFE2-50E-7F484C datasheet PDF?
The LFE2-50E-7F484C datasheet can be accessed through the datasheet reference linked on this page or through Lattice Semiconductor's ECP2 documentation. The document should provide the authoritative pin list, electrical limits, configuration information, timing models, package drawings, and ordering codes. Verify that the document specifically covers the ECP2 family and the exact 484-ball ordering code.
Where can I find the LFE2-50E-7F484C pinout?
The LFE2-50E-7F484C pinout is defined by the Lattice Semiconductor ECP2 package and pin-description documentation. Use the pin-description table to assign the 484 BGA balls, including power, ground, configuration, clock, and user I/O functions. Do not infer a complete ball map from the distributor summary because the generic 484-BBGA library diagram does not identify every device-specific ball function.
Is the LFE2-50E-7F484C active or obsolete?
The LFE2-50E-7F484C is listed as obsolete and no longer manufactured. Because the device is not being produced, engineers should plan a controlled migration rather than assume long-term supply. Review the original design's FPGA project, pin constraints, memory map, configuration method, timing, and I/O standards before approving a replacement.
Where can I buy the LFE2-50E-7F484C?
Use the Request a Quote form on this page to request the LFE2-50E-7F484C, current stock position, minimum order quantity, and lead time. Because the device is obsolete, availability may be limited and the result may depend on existing inventory or approved supply channels. The form allows engineers to request a quotation without relying on a potentially stale distributor price.
What is the price of the LFE2-50E-7F484C?
The current price of the LFE2-50E-7F484C should be requested through the Request a Quote form on this page. As an obsolete ECP2 device, its commercial value depends on quantity, traceable inventory, condition, and packaging. A quote is more useful than a static price because obsolete-component supply can change quickly and may be constrained.
What is the lead time for the LFE2-50E-7F484C?
The lead time for the LFE2-50E-7F484C should be confirmed through the Request a Quote form on this page. The manufacturer has discontinued the device, so production lead time is not the appropriate planning metric. Instead, request the available inventory quantity, ownership status, inspection options, and expected shipment schedule for the exact 484-BBGA ordering code.
Is the LFE2-50E-7F484C in stock?
Stock for the LFE2-50E-7F484C should be confirmed through the Request a Quote form on this page. Although retailer pages may display a buy or shipping message, the device is identified as obsolete and no longer manufactured. A current quotation and stock confirmation are therefore required before relying on availability for production or prototype builds.
What is the best drop-in replacement for the LFE2-50E-7F484C?
The closest same-footprint migration candidates are the 484-BBGA ECP2 variants that preserve the 48K logic class, such as LFE2-50SE-7F484C and LFE2-50E-7FN484C. According to Lattice ECP2 ordering information, the -7 speed grade and 484-ball package are retained. The S-series designation may change configuration or performance characteristics, so the pin table and migration guide must be checked before production use.
Can LFE2-50SE-7F484C replace the LFE2-50E-7F484C?
The LFE2-50SE-7F484C is a potential same-package migration because both devices use the 484-BBGA package, the 48K logic class, and the -7 speed designation. It is not automatically interchangeable: the SE part belongs to the S-series and may differ in configuration, performance, or system behavior. Revalidate pin constraints, timing, bitstream generation, and boot flow before substituting it.
LFE2-50E-7F484C vs LFE2-50E-7FN484C: which is the better replacement?
Choose the LFE2-50E-7FN484C when the original PCB and design can use the N ordering option without changing device-specific behavior. Both devices appear in the 484-BBGA ECP2 family and retain the 48K logic class and -7 speed grade. The N designation can affect ordering or qualification details, so compare the exact package drawing, temperature grade, lifecycle terms, and configuration compatibility.
When should I choose the LFE2-50E-6F484C over the -7 device?
The LFE2-50E-6F484C is appropriate only when the lower speed grade is sufficient for the design and the complete design has been revalidated. It retains the 48K LUT class, 339 I/O, and 484-BBGA format, but the -6 designation represents a lower speed grade than the target's -7 designation. Timing closure, synchronization, and external interface margins require fresh constraint analysis.
What are the key specifications of the LFE2-50E-7F484C?
The key specifications of the LFE2-50E-7F484C are 48,000 logic elements, 6,000 LABs or CLBs, 396,288 RAM bits, 339 I/O, a 420 MHz maximum operating frequency, and a 484-BBGA package. It is an ECP2 FPGA designed for programmable logic, embedded memory, control, communications, instrumentation, and parallel digital-processing systems.
What Lattice Semiconductor equivalent is available for the LFE2-50E-7F484C?
The closest Lattice Semiconductor migration path is the ECP2 484-BBGA family, including LFE2-50SE-7F484C, LFE2-50E-7FN484C, LFE2-50SE-7FN484C, and the lower-speed LFE2-50E-6F484C. No verified cross-manufacturer drop-in equivalent was identified. Because FPGA interchangeability depends on exact balls, configuration pins, voltage rails, timing, and bitstream support, an alternative device should never be selected from capacity alone.

נתוני עזר הנדסיים עבור LFE2-50E-7F484C — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the original LFE2-50E-7F484C when an exact, documented configuration has no proven migration and existing inventory can satisfy the build plan. For a same-footprint transition, evaluate LFE2-50SE-7F484C first when its S-series characteristics meet the system requirements, and evaluate LFE2-50E-7FN484C when its ordering and qualification terms are acceptable. Use LFE2-50E-6F484C only when the -6 timing grade closes with adequate margin; otherwise retain the -7 grade. The LFE2-50SE-6F484C option combines both changes and therefore requires the most extensive validation. For every candidate, compare exact balls, voltage rails, configuration pins, I/O standards, memory behavior, and timing. Package equality alone does not guarantee that an obsolete FPGA can be replaced without recompiling and hardware qualification.

השוואה עם חלופות

פרמטר מוצר זה LFE2-50SE-7F484C LFE2-50E-7FN484C LFE2-50SE-7FN484C LFE2-50E-6F484C LFE2-50SE-6F484C
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package 484-BBGA 484-BBGA - same 484-BBGA - same 484-BBGA - same 484-BBGA - same 484-BBGA - same
Logic Capacity 48K LUTs / 48,000 logic elements 48K LUTs 48K LUTs 48K LUTs 48K LUTs 48K LUTs
I/O Count 339 339 339 339 339 339
Speed Grade -7 -7 -7 -7 -6 -6
Product Series ECP2 E-series ECP2 S-series ECP2 E-series ECP2 S-series ECP2 E-series ECP2 S-series

מבדילים עיקריים

  • Direct -7 speed-grade migration path in the same 484-BBGA footprint (לעומתLFE2-50E-6F484C)
  • Same package, speed grade, and 48K logic class (לעומתLFE2-50E-7FN484C)
  • S-series migration option preserves logic and I/O density (לעומתLFE2-50SE-7F484C)

הערות תכנון

Treat the 484-BBGA as a high-density fan-out and escape-routing problem. Use the manufacturer package drawing to define pad, solder-mask, and paste geometry, and reserve clean escape paths for every power, ground, clock, configuration, and active user-I/O ball. Because the generic package library does not contain this exact BGA, the physical footprint and ball map must come from the Lattice Semiconductor package documentation rather than from a generic 484-ball symbol.

Follow the ECP2 power-supply and decoupling requirements for every voltage rail and I/O bank. Place the smallest recommended bypass capacitors directly at the relevant package balls and provide low-impedance planes or pours for core and I/O current. Bank voltage and sequencing must match the selected LFE2-50E-7F484C configuration, especially when clocks, memories, transceivers, or external converters share the board.

Do not approve a replacement based only on the 484-BBGA package and 48K LUT count. Compare the exact ball map, voltage rails, configuration pins, supported I/O standards, speed grade, package dimensions, and device features. The LFE2-50SE options can differ in series behavior, while the -6 options have less timing margin. Rebuild the bitstream, regenerate constraints, and run post-route timing and hardware tests before production release.

Preserve the original clock topology and re-evaluate every source-synchronous, chip-to-chip, and asynchronous interface during migration. The 339-I/O capacity does not guarantee that every electrical function remains interchangeable across ECP2 ordering options. Check I/O standard support, slew, drive strength, pull behavior, clock pins, and bank restrictions for both ends of each interface, then measure edge margin on assembled prototypes.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No device-specific compliance declarations were identified for the LFE2-50E-7F484C. Review the manufacturer material declaration and the exact ordering code before making environmental or automotive qualification claims.

הנתונים אומתו בתאריך: 2026-11-10 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

LFE2-50E-7F484C datasheet LFE2-50E-7F484C pinout LFE2-50E-7F484C datasheet pdf LFE2-50E-7F484C equivalent LFE2-50E-7F484C replacement LFE2-50E-7F484C cross reference LFE2-50E-7F484C price LFE2-50E-7F484C stock LFE2-50E-7F484C 420MHz LFE2-50E-7F484C 484-BBGA LFE2-50E-7F484C vs LFE2-50SE-7F484C Lattice Semiconductor LFE2-50E-7F484C LFE2-50E-7F484C FPGA application circuit

רכיבים ומונחים קשורים

Lattice Semiconductor LFE2-50E-7F484C LFE2-50SE-7F484C LFE2-50E-7FN484C LFE2-50SE-7FN484C LFE2-50E-6F484C LFE2-50SE-6F484C ECP2 FPGA field-programmable gate array programmable logic logic element LUT LAB CLB embedded RAM I/O 484-BBGA BGA package family surface-mount semiconductor maximum operating frequency speed grade industrial automation communications infrastructure test and measurement embedded signal processing
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר