LMR358F-GE2 - Dual Ground-Sense Op Amp | ROHM Semiconductor
N.º de pieza: LMR358F-GE2 ✓ ActivoLMR358F-GE2 Descripción general
An operational amplifier is an analog integrated circuit that compares an inverting input with a non-inverting input and amplifies the voltage difference between them. A ground-sense amplifier is designed to maintain useful input and output behavior near the lower supply rail, making it suitable for sensor signals, battery-powered systems, and low-voltage instrumentation. Within the broader semiconductor hierarchy, this device is a dual-channel operational amplifier, analog amplifier IC, and low-power voltage-feedback amplifier.
The principal features of the LMR358F-GE2 are its dual-channel configuration, low-power operating concept, low-voltage supply capability, ground-sense positioning, rail-to-rail output, and ability to swing the output close to the supply rails. The 8-SOP package provides a compact surface-mount footprint for two independent amplifier channels. Its general-purpose positioning also makes it suitable for buffering, amplification, voltage comparison, and signal-conditioning functions rather than limiting it to one specialized measurement topology.
The LMR358F family shares its operating concept with the single-channel LMR321 and the quad-channel LMR324. This family relationship provides a practical path for common amplifier functions across different channel counts. The two-channel LMR358F is appropriate when a board requires two amplifiers but does not need the four channels of a quad device. Its full-swing output behavior can simplify interface design when the available output headroom is limited by a low supply voltage.
Typical applications include battery-powered sensor conditioning, portable measurement systems, low-voltage industrial interfaces, current-sense amplifiers, general-purpose buffers, and embedded control analog sections. The device can amplify sensor outputs close to ground while operating from a constrained supply, making it particularly useful when the signal of interest occupies only a small portion of the available supply range. It can also be used where two independent analog channels provide a simpler layout than duplicating discrete amplifiers.
When designing around the LMR358F-GE2, verify the input common-mode range, output swing, supply voltage, input bias current, noise, offset voltage, and stability requirements against the manufacturer datasheet for the selected operating conditions. Place input and output components close to the relevant device pins, maintain the recommended bypass capacitance, and route feedback paths away from noisy or high-impedance input nodes. Confirm the exposed or exposed-pad details only if the exact mechanical drawing indicates an exposed pad.
This product page combines the manufacturer classification, package and channel details, commercial sourcing path, and engineering guidance with a conservative drop-in replacement assessment. It distinguishes a verified same-footprint family alternative from broader LM358-type devices whose package, pin arrangement, or electrical ratings may not support a true drop-in replacement.
Alternativas directas para LMR358F-GE2 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
LMR358FJ-GE2
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LMR358F-GE2 Valores máximos y características eléctricas
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Channels | 2 channels |
| Número de pines | 8 pins |
| Encapsulado | 8-pin SOP |
| Operating Class | Low-power operational amplifier |
| Supply Class | Low-voltage operation |
| Input Type | Ground-sense input |
| Output Characteristic | Rail-to-rail output |
| Output Swing | Full-swing output |
| Estado RoHS | Compliant |
Configuración de pines de LMR358F-GE2
| Pin 1 | OUT1 — Amplifier 1 output |
| Pin 2 | IN1- — Amplifier 1 inverting input |
| Pin 3 | IN1+ — Amplifier 1 non-inverting input |
| Pin 4 | V- — Negative supply connection |
| Pin 5 | IN2+ — Amplifier 2 non-inverting input |
| Pin 6 | IN2- — Amplifier 2 inverting input |
| Pin 7 | OUT2 — Amplifier 2 output |
| Pin 8 | V+ — Positive supply connection |
Aplicaciones típicas
LMR358F-GE2 es adecuado para 6 aplicacións: Battery-Powered Sensor Conditioning, Portable Measurement Systems, Low-Voltage Industrial Interfaces, Current-Sense Amplification, General-Purpose Signal Buffering, Embedded Control Analog Front End.
Battery-Powered Sensor Conditioning
The LMR358F-GE2 is appropriate for conditioning two low-level sensor signals in a battery-powered system because its two channels share one compact 8-pin SOP package and its ground-sense architecture targets operation near the lower supply rail. One channel can buffer a sensor output while the other performs a related amplification or comparison function. The low-power operating concept helps preserve system energy budget, while full-swing output provides more usable signal range at constrained supply voltages. Verify the actual input common-mode range, supply limits, output swing, input bias current, and noise before selecting the gain network.
Recomendado
Portable Measurement Systems
The dual LMR358F-GE2 supports portable measurement systems that need two analog channels without allocating two separate amplifier packages. A typical arrangement uses one channel for input conditioning and the other for gain, offset, or reference-related functions. Its ground-sense capability is valuable when measured signals occupy a small range near ground, while its full-swing output helps preserve measurement amplitude. The compact 8-pin SOP construction also reduces board area. For precision instruments, check offset voltage, drift, input bias current, noise, settling time, and common-mode limits under the actual supply voltage.
Recomendado
Low-Voltage Industrial Interfaces
The LMR358F-GE2 can support low-voltage industrial interface circuits where sensor or control signals require amplification near ground. Its two amplifier channels allow a board to process or buffer two related low-level signals while keeping the footprint small. The low-power, low-voltage focus is useful in distributed equipment where supply energy and board area are constrained, and the full-swing output can reduce the signal headroom required by the next circuit stage. Validate industrial temperature requirements, noise immunity, transient exposure, and supply limits against the manufacturer datasheet.
Recomendado
Current-Sense Amplification
The LMR358F-GE2 can amplify a small voltage developed across a current-sense resistor when that voltage lies close to the lower supply rail. One channel may provide gain for the sense voltage while the second channel handles filtering, reference comparison, or another related low-level signal. Its ground-sense positioning helps preserve small differential signals, and the full-swing output offers useful range at low supply voltage. Check the input common-mode limits at the minimum operating supply, confirm the gain-bandwidth and slew-rate requirements, and account for input bias-current error across the complete resistor tolerance range.
Recomendado
General-Purpose Signal Buffering
The LMR358F-GE2 can function as two unity-gain or finite-gain buffers in control, embedded, and interface circuits. A dual amplifier reduces package count while retaining independent channels for source impedance isolation, level conditioning, and impedance conversion. The 8-pin SOP footprint suits compact surface-mount assemblies, and the low-power operating concept is appropriate for embedded systems with limited supply capacity. Confirm that each signal remains inside the common-mode range, that output loading does not degrade stability, and that input capacitance does not create excessive overshoot or ringing at the selected gain.
Recomendado
Embedded Control Analog Front End
The LMR358F-GE2 can condition analog inputs around a low-voltage embedded controller by providing two channels for sensor amplification, threshold conversion, or actuator feedback. Its low-voltage and low-power characteristics fit systems where the amplifier must operate from a compact supply, while the ground-sense architecture helps process signals near the lower rail. The dual 8-pin SOP package simplifies routing compared with two separate amplifiers. Confirm supply startup behavior, input protection requirements, output drive into the controller or downstream load, and the manufacturer's recommended bypass-capacitor network before finalizing the PCB.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para LMR358F-GE2 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | LMR358FJ-GE2 |
|---|---|---|
| Brand | ROHM Semiconductor | ROHM Semiconductor |
| Package | 8-pin SOP | 8-pin SOP |
| Number of Channels | 2 channels | 2 channels |
| Number of Pins | 8 pins | 8 pins |
| Operating Class | Low-power operational amplifier | Low-power operational amplifier |
| Input Type | Ground sense | Ground sense |
| Output Characteristic | Rail-to-rail output | Rail-to-rail output |
Diferenciadores clave
- Two ground-sense channels in one compact package (frente a LMR358FJ-GE2)
- Low-power operation for constrained supplies (frente a LMR358FJ-GE2)
- Ground-sense and full-swing output positioning (frente a LMR358FJ-GE2)
Notas de diseño
Place the supply bypass capacitor and each amplifier's feedback or gain-setting components close to the associated LMR358F-GE2 pins. Keep input-node copper paths short and isolate them from output and return-current paths. Because the package contains two channels, maintain separate, symmetric routing for amplifier 1 and amplifier 2 unless the circuit intentionally shares a reference or filter network.
Do not assume that every LM358-family amplifier is interchangeable with the LMR358F-GE2. Check the common-mode input range at the minimum supply voltage, output swing into the actual load, input bias current, offset voltage, noise, slew rate, and stability configuration. A nominal dual-op-amp pin count does not by itself guarantee equivalent signal behavior or acceptable bias-current error.
For a ground-sense input, calculate the worst-case input-referred error produced by input bias current and the effective source resistance. Keep impedances around the non-inverting input balanced where practical, and use guarding or shielding if the node is sensitive to leakage. Also evaluate capacitive loading at the output because excessive capacitance can affect settling and stability.
Decouple each supply rail locally and verify the regulator's behavior during startup, shutdown, and load transients. The dual amplifier can present a changing load as each channel enters or leaves its operating state. Confirm that the supply remains within the manufacturer's allowed range and that output saturation during rail collapse cannot create an unsafe system-level control action.
Información de cumplimiento
RoHS status is listed as true in the LMR358F-GE2 comparison record. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was established for this ordering code.