Analog Devices

LT1012CJ8 - Precision Operational Amplifier | Analog Devices

N.º de pieza: LT1012CJ8 ✓ Activo
±20 V maximum Vdss Picoampere class Id 8-pin CERDIP (CDIP) Package
MOQ: 1 |

LT1012CJ8 Descripción general

Analog Devices LT1012CJ8 is a single-circuit, internally compensated precision operational amplifier in an 8-pin CERDIP package. It is designed for low-noise signal conditioning, instrumentation, and precision analog measurement. Key characteristics include picoampere-level bias current, very high common-mode and power-supply rejection, extremely low warm-up drift, a voltage gain of one million, and the ability to deliver 5 mA of load current. The device operates with supply voltages extending to ±20 V.

A precision operational amplifier is a voltage-feedback amplifier that uses high open-loop gain and negative feedback to amplify small signals accurately. Within the electronics hierarchy, the LT1012 is an operational amplifier, a type of analog amplifier and analog integrated circuit used for instrumentation, buffering, error amplification, and signal conditioning. Its unusually low bias current makes it particularly useful when source leakage and input-current error must remain small.

The LT1012 combines low-noise operation with exceptional common-mode and power-supply rejection ratios. Picoampere bias currents remain maintained over the stated temperature range, reducing errors in high-impedance measurement circuits. A gain of one million supports high closed-loop precision when appropriate feedback resistors are used, while the 5 mA load-current capability allows the amplifier to drive moderate loads rather than operate strictly as a high-impedance buffer.

The internal compensation makes the LT1012 broadly applicable without external compensation components. This simplifies precision circuit design when the required stability characteristics match the manufacturer's recommended configurations. Its low warm-up drift helps maintain calibration consistency in circuits where output movement after power application would degrade accuracy.

Typical uses include low-level sensor amplification, strain-gauge and bridge-based measurement, precision instrumentation, low-level signal conditioning, and buffering applications. The 5 mA output-current capability is useful when driving a moderate input load, while the high open-loop gain and rejection characteristics support accurate amplification of small differential signals.

When connecting the LT1012CJ8, follow the manufacturer pin-description table and observe the supply-voltage limits. Decoupling capacitors should be placed close to the supply pins, and sensitive input nodes should be kept away from high-current return paths to minimize parasitic pickup. Feedback resistor values and source impedances should be selected to maintain the intended noise, bias-current, and stability performance.

This product page combines the manufacturer's functional description with package information, application guidance, sourcing structure, and explicit drop-in alternative evaluation. It is intended to help engineers distinguish verified characteristics from assumptions and to plan a PCB or legacy-system replacement before committing to a component change.

Alternativas directas para LT1012CJ8 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con LT1012CJ8 (mismo factor de forma y huella) — difiere en Package.

Analog Devices
Package: 8-pin CERDIP
Comparar con LT1012CJ8 →

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

LT1012CJ8 Valores máximos y características eléctricas

Product Type 1-circuit precision operational amplifier
Compensation Internally compensated
Tensión de alimentación ±20 V maximum
Bias Current Picoampere class
Voltage Gain 1,000,000 V/V
Load Current 5 mA
Power Dissipation 1 mW on two Ni-Cad batteries
Rango de temperatura de funcionamiento 55 C to 125 C stated for maintained bias-current performance
Encapsulado 8-pin CERDIP (CDIP)
Package Body Width 0.300 in (7.62 mm)
Tipo de montaje Through-hole

Guía de configuración de pines de LT1012CJ8 0.300 in (7.62 mm)

Configuración de pines para LT1012CJ8 (encapsulado 0.300 in (7.62 mm)). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 0.300 in (7.62 mm) para LT1012CJ8

No hay datos detallados de patillaje disponibles para LT1012CJ8.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

LT1012CJ8 es adecuado para 6 aplicacións: Precision Strain-Gauge Instrumentation, Low-Level Sensor Signal Conditioning, Battery-Powered Precision Measurement, Precision Buffering, Audio and Communication Front Ends, Industrial Process-Control Loops.

🏭

Precision Strain-Gauge Instrumentation

The LT1012CJ8 is well suited to precision strain-gauge and resistive-bridge instrumentation because its picoampere-class bias current minimizes the input-current error introduced by high-impedance sensing networks. According to the Analog Devices product page, the amplifier also provides extremely high common-mode rejection and a voltage gain of one million, characteristics that help preserve small differential signals around a large common-mode voltage. It can be placed in the differential input stage, where feedback resistors establish the required gain. Designers should verify the actual common-mode range, offset voltage, noise, and stability against the LT1012 datasheet for the selected bridge excitation and source impedance.

🧩

Low-Level Sensor Signal Conditioning

The LT1012CJ8 can amplify outputs from low-level sensors where leakage current and common-mode variation would otherwise become significant error sources. Its picoampere-class bias current supports high source impedances, while the high common-mode rejection ratio helps suppress voltage changes that appear equally on both inputs. A practical implementation places the LT1012 in a non-inverting or differential gain stage and places compensation or filtering networks where required by the sensor bandwidth. The manufacturer highlights 5 mA of load-current capability and a gain of one million, but the final design must also satisfy the sensor's output range, noise target, and environmental requirements.

📱

Battery-Powered Precision Measurement

The LT1012CJ8 supports battery-powered precision measurement because Analog Devices states that the LT1012 can operate on two Ni-Cad batteries with 1 mW of power dissipation. This low-power capability is valuable when input bias current, warm-up drift, and supply rejection influence the integrity of a portable measurement system. The amplifier can serve as the input stage ahead of an ADC or a switched-capacitor measurement circuit. Low power alone does not eliminate thermal settling effects, so the system should allow sufficient warm-up time and use power-supply arrangements consistent with the ±20 V maximum supply magnitude and the device's operating specifications.

🔧

Precision Buffering

The LT1012CJ8 is appropriate for precision buffering when the source presents high impedance or when buffer offset and drift must remain controlled. Its internally compensated architecture simplifies implementation of a unity-gain voltage follower, and its 5 mA load-current capability provides more drive than a strictly high-impedance instrumentation buffer would normally need. The picoampere-class bias current also limits disturbance of the source. Engineers should confirm unity-gain stability, capacitive-load behavior, output swing, and settling performance for the selected feedback configuration before using the device with long cables, switched-capacitor networks, or unusually high capacitive loads.

🌐

Audio and Communication Front Ends

The LT1012CJ8 can serve in low-level audio or communication front ends where low bias current, high rejection ratios, and low warm-up drift are more important than maximum slew rate or output-current capability. The high open-loop gain supports accurate closed-loop amplification, while the internal compensation avoids external stability networks in standard configurations. Its use near sensitive audio or communication nodes should be based on a datasheet review of noise density, input-voltage noise, common-mode range, and gain-bandwidth behavior. The device is not characterized here as a high-speed or high-output-current driver, so impedance matching and bandwidth requirements remain central to the design decision.

🏭

Industrial Process-Control Loops

The LT1012CJ8 is applicable to precision industrial process-control loops in which small sensor signals must be amplified in the presence of supply and common-mode disturbances. The high common-mode and power-supply rejection ratios can improve immunity to variations that occur within the amplifier's operating range, while picoampere-class bias current is valuable when sensors have high output impedance. A typical implementation would use the device in a differential input stage and interface the result to a converter or control stage. Final qualification should account for the process signal range, required bandwidth, noise, common-mode limits, and the temperature range of the industrial installation.

What is the LT1012CJ8?
The LT1012CJ8 is a single-circuit, internally compensated precision operational amplifier manufactured by Analog Devices in an 8-pin CERDIP package. According to the Analog Devices LT1012 product page, it combines picoampere bias currents, high common-mode and power-supply rejection ratios, extremely low warm-up drift, a voltage gain of one million, and the ability to deliver 5 mA of load current.
What are the key specifications of LT1012CJ8 that engineers should know?
The LT1012CJ8 combines a voltage gain of 1,000,000 V/V, picoampere-class bias current, 5 mA load-current capability, and supply operation extending to ±20 V. According to the Analog Devices product page, its unusually low warm-up drift and high common-mode and power-supply rejection ratios are important for precision signal-conditioning applications requiring stable measurements.
What is the power supply range of LT1012CJ8?
The LT1012CJ8 supports a maximum supply magnitude of ±20 V. The manufacturer identifies it as a precision operational amplifier for instrumentation and other precision applications, including operation from two Ni-Cad batteries at only 1 mW of power dissipation. Exact recommended supply combinations and headroom limits should be confirmed in the LT1012 datasheet before circuit release.
Why is the LT1012CJ8 suitable for high-impedance sensor circuits?
The LT1012CJ8 is suitable for high-impedance sensor circuits because its bias current is in the picoampere class and remains maintained over the stated 55 C to 125 C temperature range. According to the Analog Devices LT1012 product page, this behavior reduces input-current error in source arrangements where even a small leakage contribution can materially degrade measurement accuracy.
Does LT1012CJ8 need external compensation components?
No, the LT1012 is internally compensated, so external compensation components are not generally required for its intended precision applications. According to the Analog Devices product page, the internal compensation broadens the range of circuits in which the amplifier can be used. Feedback topology, source impedance, and stability requirements should still follow the manufacturer guidance in the datasheet.
LT1012CJ8 vs LT1014AMJ: which is better for precision amplification?
The LT1012CJ8 is the better choice when the design specifically requires a unity-gain-stable, internally compensated precision operational amplifier with picoampere-class bias current. The LT1014AMJ is a comparator-oriented alternative rather than a functional drop-in replacement. The Analog Devices LT1012 page specifically describes a voltage gain of one million and 5 mA load-current capability for the LT1012.
What is the best drop-in replacement for LT1012CJ8?
The best drop-in replacement must have the same 8-pin CERDIP footprint, identical pin functions, compatible supply requirements, and comparable precision parameters. No named candidate in the available cross-reference results meets all of those requirements, so a replacement cannot be responsibly designated as a drop-in. Use the LT1012CJ8 manufacturer page and pin table to verify any candidate before redesigning or sourcing a substitute.
Can LT1012ACS8 replace LT1012CJ8?
The LT1012ACS8 cannot be treated as a direct drop-in replacement for the LT1012CJ8 because its package suffix identifies a different package option from the CJ8 CERDIP version. Even if the amplifier functions are related, a footprint mismatch prevents installation without PCB changes. The physical package and pin arrangement must match before any substitution is considered electrically and mechanically valid.
Where can I download the LT1012CJ8 datasheet PDF?
The official LT1012 product information and datasheet are available from Analog Devices through the product page linked on this page. The LT1012CJ8 is a packaged ordering code within the LT1012 family, so the family document contains the core specifications, applications, and package drawings. Verify the ordering-code table in that document to associate the CJ8 suffix with the 8-pin CERDIP configuration.
Where can I find the LT1012CJ8 pinout?
Use the pin-description table and package drawing in the official Analog Devices LT1012 datasheet to assign the LT1012CJ8 connections. The CJ8 option is an 8-pin through-hole CERDIP package, but no complete numbered pin list is reproduced on this page. The pinout diagram must be cross-checked against the exact ordering code before PCB layout or replacement work begins.
What is the lead time for LT1012CJ8?
The current lead time and minimum order quantity for LT1012CJ8 should be requested through the Request a Quote form on this page. Manufacturer and channel status can change without changing the device's electrical characteristics. Supply planning should include the legacy 8-pin CERDIP package requirement so procurement does not substitute a surface-mount variant without engineering approval.
Is LT1012CJ8 in stock?
Current LT1012CJ8 availability should be confirmed through the Request a Quote form on this page. Because this is an order-on-request component page, stock status is not asserted without a transaction-specific inventory check. Engineers also need to confirm whether the intended assembly process can accommodate the 8-pin through-hole CERDIP package.
Where can I buy LT1012CJ8 online?
LT1012CJ8 can be requested through the Request a Quote form on this page for current availability, lead time, and order handling. Quote requests are the appropriate route for this legacy precision amplifier because quantity and package requirements affect the final supply plan. The required configuration is one amplifier in an 8-pin CERDIP package.
What is the price of LT1012CJ8?
Use the Request a Quote form on this page to obtain the current price for LT1012CJ8. Pricing depends on order quantity, package configuration, and current supply status, so a static figure would not represent a reliable transaction offer. Provide the required quantity and any target assembly schedule when submitting the request.
Is LT1012CJ8 suitable for instrumentation and bridge-measurement circuits?
The LT1012CJ8 is suitable for many instrumentation and low-level measurement circuits because it offers picoampere-class bias current, a voltage gain of one million, and high common-mode rejection. According to the Analog Devices product page, these characteristics support precision operation with small signals. The application also depends on common-mode range, noise, offset, and stability requirements beyond those values.

Datos de referencia de ingeniería para LT1012CJ8 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the LT1012CJ8 when the design needs a low-noise, high-rejection precision operational amplifier with picoampere-class bias current, very low warm-up drift, and a gain of one million. It is especially suitable for high-impedance sensing, bridge instrumentation, precision buffering, and battery-powered measurement. Its internal compensation simplifies standard precision topologies, while 5 mA of load-current capability provides useful drive for moderate loads. LT1012ACS8 should not be selected as a direct replacement merely because it belongs to the same family; its package differs from the CJ8 CERDIP configuration and therefore requires a PCB change. For general-purpose multi-channel amplification where ultra-low bias current and high common-mode rejection are unnecessary, a lower-cost quad amplifier may be more appropriate. Before selecting any substitute, verify the complete pin arrangement, supply range, offset, bandwidth, slew rate, noise, common-mode range, and stability rather than relying on package pin count alone.

Comparación con alternativas

Parámetro Este producto
Package 8-pin CERDIP (CDIP)
Brand Analog Devices
Circuit Count 1 circuit
Amplifier Type Precision operational amplifier
Compensation Internally compensated
Supply Voltage ±20 V maximum
Voltage Gain 1,000,000 V/V
Bias Current Picoampere class
Load Current 5 mA
Mounting Type Through-hole

Diferenciadores clave

  • Exceptionally low input bias current for precision measurement (frente a General-purpose quad amplifiers such as LM324KDR)
  • Very high closed-loop precision potential (frente a LM2904PWR)
  • Practical load-current capability (frente a Strictly high-impedance instrumentation-buffer designs)

Notas de diseño

Use the LT1012CJ8 pin-description table in the manufacturer datasheet to assign all eight connections before routing the PCB. Keep the through-hole CERDIP footprint mechanically compatible with the target board and do not substitute an 8-pin SOIC configuration solely because both packages have eight leads. Place input, output, and supply-loop connections compactly, and prevent high-current return paths from sharing the sensitive ground path of the precision measurement stage.

Decouple each supply connection near the device with the capacitance and layout recommended by Analog Devices. Because the LT1012 provides high power-supply rejection, bypassing remains essential for converting that capability into system-level performance. The LT1012 can operate from two Ni-Cad batteries at 1 mW of power dissipation and supports supply magnitudes up to ±20 V, but the chosen source must also meet transient, noise, and common-mode requirements.

Protect sensitive input nodes from capacitive pickup, leakage, and ground-current gradients. The picoampere-class bias current makes the LT1012 suitable for high-impedance sources, but those same high-impedance nodes can amplify stray charge and PCB contamination. Keep connectors and switching-power stages away from the input path, use guarding where practical, and choose feedback resistors that balance Johnson noise against the input bias-current error.

Do not infer that every 8-pin amplifier with similar gain is a drop-in substitute. The CJ8 designation requires the correct CERDIP package, while the amplifier's offset voltage, bias current, common-mode range, bandwidth, slew rate, stability, and output-drive characteristics must also meet the circuit requirements. Treat low warm-up drift as a system benefit only when the measurement chain has also reached thermal equilibrium.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was available for the exact LT1012CJ8 ordering code. AEC-Q100 is not applicable because this is an amplifier IC rather than an automotive-qualified device.

Búsquedas relacionadas

LT1012CJ8 datasheet LT1012CJ8 datasheet pdf LT1012CJ8 pinout LT1012CJ8 equivalent LT1012CJ8 replacement LT1012CJ8 drop-in replacement LT1012CJ8 8 pin CERDIP LT1012CJ8 precision amplifier LT1012CJ8 picoampere bias current Analog Devices LT1012CJ8 LT1012CJ8 instrumentation application LT1012CJ8 price LT1012CJ8 stock LT1012CJ8 vs LT1012ACS8

Componentes & términos relacionados

Analog Devices LT1012CJ8 LT1012 LT1012ACS8 LT1014AMJ precision operational amplifier operational amplifier analog amplifier analog integrated circuit instrumentation amplifier signal conditioning picoampere bias current common-mode rejection ratio power-supply rejection ratio warm-up drift voltage gain internal compensation 8-pin CERDIP through-hole package precision measurement strain-gauge bridge battery-powered instrumentation
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ