LTC6406IMS8E - 3 GHz Differential Amplifier | Analog Devices
N.º de pieza: LTC6406IMS8E ⚠ Última compra| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $9.9931 | $9,99 |
| 10 | $9.9931 | $99,93 |
| 100 | $9.9931 | $999,31 |
| 500 | $9.9931 | $4.996,55 |
| 1.000 | $9.9931 | $9.993,10 |
LTC6406IMS8E Descripción general
A fully differential amplifier is an active signal-conditioning circuit that amplifies the difference between two input voltages while providing differential outputs. This device family sits between low-level sensors or converters and downstream ADC front ends, combining differential gain, common-mode voltage control, and high-speed operation in one package. The rail-to-rail input common-mode range helps accommodate signals near the supply rails, while VOCM provides an independent output bias control for system-level signal-chain alignment.
The verified manufacturer material identifies the LTC6406 as a low-noise, low-distortion, fully differential input/output amplifier for 3 V operation and lists a 3 GHz bandwidth-related feature. Search results also identify the LTC6406IMS8E#PBF ordering code as an 8-MSOP-EP package variant. The industrial-temperature suffix and package suffix should be confirmed against the exact datasheet ordering table before production release, especially when exposed-pad thermal construction is involved.
The architecture is appropriate for high-speed ADC interfaces, differential signal chains, communications receivers, and instrumentation where the source is differential. VOCM can be driven from a common-mode reference or filtered control network, helping set the output bias independently of the input signal. The main engineering checks are stability with the selected gain setting, proper treatment of the exposed pad, input/output return-loss considerations, and confirmation that the output common-mode range matches the receiving ADC.
Because the product is marked LAST TIME BUY on the Analog Devices product page, procurement should treat it as a lifecycle-constrained item rather than a routine new-design choice. Designers should compare current availability, inspect the manufacturer datasheet and application information, and validate a qualified replacement before committing new production volumes. This page combines verified source snippets, lifecycle information, procurement caveats, and design-oriented guidance for engineers evaluating the LTC6406.
Alternativas directas para LTC6406IMS8E — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
LTC6406IMS8E#PBF
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LTC6406IMS8E#TRPBF
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LTC6406IMS8E Valores máximos y características eléctricas
| Product Type | Fully differential amplifier/driver |
| Nominal Bandwidth | 3 GHz |
| Supply Operation | 3 V single supply |
| Input Common-Mode Range | Rail-to-rail |
| Output Common-Mode Control | Independently adjustable through VOCM pin |
| Encapsulado | 8-lead MSOP-EP |
| Differential Input/Output | Fully differential input/output |
| Noise Classification | Low noise |
| Distortion Classification | Low distortion |
| Industrial Temperature Range | -40°C to +85°C |
| Nominal Supply Current | 18 mA |
| Corriente de apagado | 300 µA |
| Shutdown Feature | Hardware shutdown |
| Terminal Count | 8 |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de LTC6406IMS8E 8-lead msop-ep
Configuración de pines para LTC6406IMS8E (encapsulado 8-lead msop-ep). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.
No hay datos detallados de patillaje disponibles para LTC6406IMS8E.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
LTC6406IMS8E es adecuado para 6 aplicacións: High-Speed ADC Signal Conditioning, Communications Receiver Front End, Data-Acquisition Instrumentation, Balanced Audio and Low-Level Analog, Industrial Sensor Signal Conditioning, Portable Test and Measurement Equipment.
High-Speed ADC Signal Conditioning
The LTC6406IMS8E is well suited to differential ADC front ends because the verified manufacturer description identifies a 3 GHz-class, low-noise fully differential amplifier/driver with rail-to-rail input common mode and independently adjustable VOCM. Place it between the analog source and the ADC input, using VOCM to establish the ADC’s required common-mode level. Keep the differential routes short and symmetric, and confirm ADC input impedance, gain, bandwidth, noise, distortion, and output-swing limits against the complete datasheet.
Recomendado
Communications Receiver Front End
For communications receivers, the LTC6406IMS8E provides a dedicated differential amplifier/driver function with a 3 GHz bandwidth figure and VOCM-based output bias control. It can condition balanced IF or baseband signals while preserving differential signal integrity. Use short, impedance-controlled traces and select the gain and output common-mode voltage for the receiver ADC or mixer interface; verify return loss, channel balance, and stability in the completed layout.
Recomendado
Data-Acquisition Instrumentation
The LTC6406IMS8E is appropriate for precision data-acquisition systems requiring a fully differential signal path and rail-to-rail input common-mode capability. Its low-noise, low-distortion positioning helps preserve small-signal information before digitization, while VOCM provides a controlled output bias for the acquisition stage. Designers should budget for the approximately 18 mA operating current identified in the source data and confirm shutdown behavior, exposed-pad thermal handling, and ADC compatibility.
Recomendado
Balanced Audio and Low-Level Analog
The fully differential topology can be used for balanced low-level analog signal conditioning when common-mode control and differential balance are important. The rail-to-rail input range allows the source to operate close to the supply limits, while VOCM allows the output bias to be aligned with a downstream converter. Actual audio suitability depends on the required bandwidth, noise density, distortion, gain, and output swing; these values must be checked in the manufacturer datasheet before committing to a specific audio topology.
Recomendado
Industrial Sensor Signal Conditioning
For industrial sensors producing differential outputs, the LTC6406IMS8E provides a high-speed, low-noise differential path while VOCM helps align the output to a downstream ADC. The verified industrial temperature information of -40°C to +85°C is relevant to equipment operating across ordinary industrial environments. Apply input protection and filtering ahead of the amplifier, maintain common-impedance control, and validate offset, gain stability, noise, and calibration behavior over the required temperature range.
Recomendado
Portable Test and Measurement Equipment
The LTC6406IMS8E can serve as a high-speed differential driver in portable instrumentation where a compact surface-mount package and controllable output common mode are useful. The 3 V single-supply focus suits battery- or low-voltage-derived systems, while shutdown can reduce consumption to approximately 300 µA according to the verified source information. Account for power-supply rejection, board-level thermal rise, grounding, and the relatively high operating current when estimating battery life.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para LTC6406IMS8E — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | LTC6406IMS8E#PBF | LTC6406IMS8E#TRPBF |
|---|---|---|---|
| Package | 8-MSOP-EP | 8-MSOP-EP | 8-MSOP-EP, tape-and-reel ordering context |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Bandwidth | 3 GHz | 3 GHz | 3 GHz |
| Supply | 3 V single supply | 3 V single supply | 3 V single supply |
| Input Common Mode | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Output Common Mode | VOCM adjustable | VOCM adjustable | VOCM adjustable |
| Operating Current | 18 mA | 18 mA | 18 mA |
| Shutdown Current | 300 µA | 300 µA | 300 µA |
| Lifecycle Status | Last time buy | Last time buy family context | Last time buy family context |
Diferenciadores clave
- Dedicated 3 GHz differential ADC-driver positioning (frente a LTC6247IKC)
- Independent output common-mode adjustment (frente a LTC6247IKC)
- Rail-to-rail input common mode (frente a LTC6406IMS8E#PBF)
Notas de diseño
Use a short, symmetric differential layout for both inputs and outputs. Keep the gain-setting network close to the relevant pins, and place supply bypass capacitors at the device pins rather than at a remote supply entry point. The 3 GHz bandwidth figure means trace geometry, return paths, impedance, and parasitic capacitance can materially affect stability and signal integrity.
Estimated: with the verified operating current of approximately 18 mA and a 3 V supply, the device supply power is approximately 0.054 W before adding external-load dissipation. That estimate does not include AC output swing, PCB copper heat spreading, or adjacent-circuit losses. Use the exact operating mode from the datasheet and thermal package data for a final thermal design.
Do not select a replacement based only on the LTC6406 family name or the 8-MSOP package. Verify pin names, exposed-pad connection, VOCM range, output swing, gain stability, supply tolerances, shutdown polarity, temperature grade, and lifecycle status. Because the product is marked LAST TIME BUY, also confirm authorized sourcing and lot traceability before production commitment.
Información de cumplimiento
The supplied search data includes a #PBF ordering code, which commonly indicates a lead-free package marking, but the official compliance statements were not provided. RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification status remain unknown from the verified material.
