Analog Devices

MAX202ECSE+G068 - 2/2 RS-232 Transceiver | Analog Devices

N.º de pieza: MAX202ECSE+G068 ✓ Activo
4.5 V to 5.5 V Vdss 16-pin SOIC, 0.154 inch body width, 3.90 mm body width Package
MOQ: 1 |

MAX202ECSE+G068 Descripción general

The Analog Devices MAX202ECSE+G068 is a 2/2 RS-232 transceiver with two transmitters and two receivers, a 4.5 V to 5.5 V supply range, and a 16-pin SOIC package. Designed for RS-232 and V.28 communications, it provides bidirectional line-interface conversion between TTL-compatible logic and differential-style RS-232 signals. The E designation identifies the ESD-protected family, and the G068 ordering code distinguishes this manufacturer-specified configuration.

An RS-232 transceiver is an interface IC that converts low-voltage digital logic signals into RS-232 line levels and converts received RS-232 signals back into logic-compatible levels. This dual-transceiver, dual-receiver arrangement belongs to the broader line-driver and receiver hierarchy, where interface ICs connect modern digital equipment to established serial-bus systems. Charge-pump circuitry allows the MAX202 family to generate the positive and negative voltage levels required by RS-232 without an external negative supply.

The MAX202ECSE+G068 provides 2 transmitter outputs and 2 receiver inputs for compact bidirectional serial links. Its operating supply range of 4.5 V to 5.5 V supports conventional 5 V equipment. The listed 15 kV ESD protection rating is a key feature for ports connected to external cables, where electrostatic discharge can reach the transceiver through unprotected connector paths. The 16-pin SOIC package is offered in tube packaging according to the manufacturer ordering information.

The interface architecture is intended for point-to-point RS-232 and V.28 communications in equipment that requires multiple serial channels. Because RS-232 uses unbalanced signaling with defined logic thresholds, the transmitter converts host-side logic into valid line voltages, while the receiver converts the line voltage into a host-readable logic state. The integrated charge-pump support reduces external circuitry compared with solutions requiring a separate negative rail or discrete level-shifting networks.

Typical applications include industrial serial-control panels, point-of-sale equipment, instrumentation links, data-acquisition systems, and communications equipment that needs more than one RS-232 port. In those systems, the device separates low-voltage controller signals from cable-side RS-232 levels while limiting the number of external level-conversion components. Its compact 16-pin SOIC footprint also supports PCB layouts where connector-side routing space is limited.

For a robust design, route the external serial connector through the shortest practical path to the transceiver, maintain the device's specified supply and decoupling requirements, and use the pin-description table in the Analog Devices datasheet when assigning PCB tracks. Cable-side protection and chassis-ground strategy should be selected according to the installation environment, especially when exposed to industrial transients.

This page organizes the MAX202ECSE+G068 interface details, sourcing information, same-footprint alternatives, comparison parameters, and application-oriented engineering guidance into a practical selection reference for engineers designing 5 V RS-232 equipment.

Alternativas directas para MAX202ECSE+G068 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MAX202ECSE+G068 (mismo factor de forma y huella) — difiere en Package, Transceiver Configuration, ESD Protection, Supported Protocol.

Maxim Integrated
Package: 16-pin narrow SOIC
Transceiver Configuration: 2/2 full-duplex
ESD Protection: ±15 kV HBM
Comparar con MAX202ECSE+G068 →
Analog Devices
Package: 16-SOIC, 0.154 in x 3.90 mm width
Transceiver Configuration: 2/2 full RS-232
Supported Protocol: RS-232
Comparar con MAX202ECSE+G068 →

MAX202ECSE+

✅ Sustitución directa
📦 16-SOIC
Same 2/2 RS-232 configuration, 4.5 V to 5.5 V supply, and 16-pin SOIC package; ordering suffix differs by 0 percentage points on the listed key ratings

📋 Alternativa de referencia (no en el catálogo)

MAX202ECSE+TG068

✅ Sustitución directa
Analog Devices
📦 16-SOIC
2 · 2 · 2/2 full RS-232 · RS-232 · 4.5 V to 5.5 V · 15 kV · 16-SOIC, 0.154 in x 3.90 mm width · Tape and reel

Consulte el precio

Ver hoja de datos →

MAX202ECSE+T

✅ Sustitución directa
Maxim Integrated
📦 16-SOIC
RS-232 transceiver · 2/2 full-duplex · 2 · 2 · +5 V · 120 kbit/s · 30 V/µs · ±15 kV HBM

Consulte el precio

Ver hoja de datos →

MAX202ECSE+G068 Especificaciones

Number of Drivers 2
Number of Receivers 2
Transceiver Configuration 2/2 full-duplex RS-232 transceiver
Supported Protocol RS-232 and V.28
Supply Voltage Range 4.5 V to 5.5 V
ESD Protection 15 kV
Encapsulado 16-pin SOIC, 0.154 inch body width, 3.90 mm body width
Package Type SOIC-16
Tipo de montaje Surface mount
Manufacturer Packaging Tube
Número de pines 16
Interface Category RS-232, RS-422 and RS-485 interface device family listing
Transmitter Outputs 2
Receiver Inputs 2
Charge-Pump Support Integrated for RS-232 level generation

Guía de configuración de pines de MAX202ECSE+G068 soic-16

Configuración de pines para MAX202ECSE+G068 (encapsulado soic-16). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado soic-16 para MAX202ECSE+G068

No hay datos detallados de patillaje disponibles para MAX202ECSE+G068.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MAX202ECSE+G068 es adecuado para 6 aplicacións: Industrial Serial Control Panels, Point-of-Sale Terminal Interfaces, Data-Acquisition Instruments, Security and Access-Control Equipment, Communication and Network Equipment, Test and Measurement Systems.

🏭

Industrial Serial Control Panels

The MAX202ECSE+G068 suits industrial control panels that need two RS-232 paths between a controller and external equipment. Its 2/2 configuration supports two transmitters and two receivers, while the 4.5 V to 5.5 V supply range integrates with conventional 5 V control electronics. The listed 15 kV ESD protection improves robustness at connector-facing circuits exposed to electrostatic discharge. Install the transceiver near the serial connector, keep the cable-side traces short, and provide local supply decoupling. The device implements RS-232 and V.28 signaling, making it appropriate for configuration ports, service interfaces, and supervisory links where longer-distance point-to-point communication is required.

🔧

Point-of-Sale Terminal Interfaces

The MAX202ECSE+G068 can connect a point-of-sale terminal or peripheral controller to two RS-232 ports without requiring a separate negative supply rail. Its two transmitters and two receivers support compact multi-port serial equipment, while the 5 V supply range aligns with common embedded logic systems. The 16-pin SOIC package reduces board area compared with larger discrete interface arrangements. Position the transceiver near the connector to minimize exposed cable-side routing, and confirm the manufacturer pin assignments before laying out the PCB. The E-series ESD protection is particularly relevant at user-accessible peripheral ports, although it does not replace correctly selected external surge and cable protection.

📡

Data-Acquisition Instruments

The MAX202ECSE+G068 is appropriate for laboratory and industrial data-acquisition instruments that exchange commands and results through RS-232. Its 2/2 transceiver arrangement can handle separate control and measurement channels, and the 4.5 V to 5.5 V supply range supports a 5 V instrument architecture. Integrating the transceiver near the DB9 or equivalent connector helps keep the cable interface compact. For bench equipment, pay particular attention to grounding, cable length, and receiver behavior. The manufacturer documentation identifies the part for RS-232 and V.28 communication, allowing it to bridge modern TTL logic with established instrumentation-control ports.

🛡️

Security and Access-Control Equipment

The MAX202ECSE+G068 can support serial programming and diagnostic ports in access-control and security equipment. Two RS-232 channels provide flexibility for connecting a reader, controller, or service interface while the 15 kV ESD protection helps manage electrostatic discharge reaching connector-facing electronics. Use the transceiver near the connector and observe the manufacturer’s supply and grounding guidance. Because security devices may also carry sensitive data, the serial interface should not be treated as a security boundary by itself; authentication and encryption belong at a higher protocol layer. The 16-pin SOIC package provides a compact implementation in space-constrained reader and controller assemblies.

🌐

Communication and Network Equipment

The MAX202ECSE+G068 is useful in communication equipment that retains RS-232 service, console, or management ports alongside newer digital interfaces. Its 2/2 configuration permits two independent serial paths, and the single 5 V supply range simplifies integration with embedded processors and programmable logic. The ESD-protected E-series implementation is advantageous when serial connectors are exposed to maintenance personnel or cable-borne electrostatic discharge. Route the interface toward the connector without long stubs, maintain continuous ground references, and follow the datasheet layout guidance. For networked equipment, the MAX202 handles only the physical RS-232 layer, so the connected system must implement the required protocol and security behavior.

🖥️

Test and Measurement Systems

The MAX202ECSE+G068 can serve as the RS-232 interface in test equipment, programmable instruments, and laboratory controllers. The 2 transmitters and 2 receivers support command and response channels, while the 4.5 V to 5.5 V supply range works with 5 V measurement platforms. Its 16-pin SOIC footprint allows placement close to the external connector, reducing the area occupied by cable-side routing. For accurate measurements, maintain a consistent signal-reference ground and use shielded cable where required by the installation. Review the Analog Devices pin table and electrical characteristics for the exact ordering code before finalizing the schematic and PCB.

What is the MAX202ECSE+G068?
The MAX202ECSE+G068 is a dual-transceiver, dual-receiver RS-232 interface IC from Analog Devices. It operates from a 4.5 V to 5.5 V supply and is packaged in a 16-pin SOIC. According to the Analog Devices MAX202 product family documentation, the MAX202 family is designed for RS-232 and V.28 communications, while the E-version family provides enhanced ESD protection for cable-connected equipment.
How many RS-232 transmitters and receivers does MAX202ECSE+G068 have?
The MAX202ECSE+G068 contains 2 transmitters and 2 receivers, giving it a 2/2 transceiver configuration. According to the Analog Devices product documentation and the manufacturer product listing, this allows one package to support two RS-232 channels or separate transmit and receive paths. The device is intended for RS-232 and V.28 serial communications and operates from a single 4.5 V to 5.5 V supply.
What is the operating voltage of MAX202ECSE+G068?
The MAX202ECSE+G068 operates from 4.5 V to 5.5 V. The Analog Devices MAX202 family documentation identifies a single 5 V supply architecture, with charge-pump circuitry providing the bipolar voltage levels required by RS-232. Keep the supply within the stated range, and follow the manufacturer’s recommended decoupling and operating-limit guidance when placing the device in a 5 V system.
Where can I download the MAX202ECSE+G068 datasheet PDF?
The official MAX202E family documentation is available from Analog Devices at https://www.analog.com/en/products/max202e.html. The MAX202ECSE+G068 is a member of the MAX202E family, so the manufacturer datasheet provides the electrical characteristics, package drawings, and device pin information. Use the ordering information to confirm the exact E suffix, G068 code, package, and tube-packaging configuration.
Where is the MAX202ECSE+G068 pinout?
The MAX202ECSE+G068 pinout is shown in the pin-description table and package drawing in the Analog Devices MAX202E datasheet. The device uses a 16-pin SOIC package with pin 1 identified in the standard surface-mount orientation. Assign signal and power connections from the manufacturer table rather than relying on a generic RS-232 transceiver diagram because similarly packaged devices can use different ENABLE, shutdown, or receiver-control assignments.
What is the best drop-in replacement for MAX202ECSE+G068?
The closest same-family options are MAX202ECSE+ and MAX202ECSE+TG068 because each is identified as a 2/2 RS-232 transceiver in a 16-pin SOIC. Compatibility still depends on the exact ordering suffix, ESD grade, temperature range, and packaging arrangement. Before approving a replacement, compare the manufacturer pin descriptions and electrical limits for the specific ordering code rather than treating a shared package name alone as proof of interchangeability.
Can MAX202ECSE+TG068 replace MAX202ECSE+G068?
MAX202ECSE+TG068 can serve as a candidate replacement because both are listed as 2/2 RS-232 transceivers in 16-pin SOIC packages and use the MAX202ECSE+ family construction. The ordering codes differ, however, so verify whether the change affects tube versus tape-and-reel delivery, temperature grade, or other commercial attributes. Confirm the exact pin functions and electrical limits against the Analog Devices datasheet before production use.
Is MAX202ECSE+G068 suitable for industrial serial communication?
The MAX202ECSE+G068 is suitable for many industrial serial-control and instrumentation links because it supports RS-232 and V.28 communication, provides 15 kV ESD protection, and requires a 4.5 V to 5.5 V supply. Industrial suitability also depends on the complete system: use an appropriate isolation strategy, connector-side surge protection, grounding arrangement, and cable routing for the installation environment.
What can replace the MAX202ECSE+G068 in a 5 V RS-232 design?
A replacement must provide a 2/2 RS-232 interface, operate from 4.5 V to 5.5 V, use the same 16-pin SOIC footprint, and preserve the device pin functions. MAX202ECSE+ and MAX202ECSE+TG068 are the nearest family candidates identified in the manufacturer listings. For another manufacturer’s device, first verify the complete pin configuration and charge-pump requirements; a similar protocol label alone does not establish drop-in compatibility.
Is MAX202ECSE+G068 the same as MAX202ECSE+?
MAX202ECSE+G068 and MAX202ECSE+ belong to the same MAX202ECSE+ product family and share the 2/2 RS-232, 4.5 V to 5.5 V, and 16-pin SOIC characteristics, but their complete ordering codes are not identical. Check the manufacturer ordering table for the meaning of the G068 suffix and confirm temperature grade and packaging before treating the two markings as interchangeable.
What are the key specifications of MAX202ECSE+G068 that engineers should know?
The MAX202ECSE+G068 is a 5 V RS-232 transceiver with 2 transmitters, 2 receivers, a 4.5 V to 5.5 V supply range, 15 kV ESD protection, and a 16-pin SOIC package. The Analog Devices family documentation also identifies support for RS-232 and V.28 communications. These parameters place it in the RS-232 line-driver/receiver category and define its principal role as bidirectional logic-level conversion.
What is the best Analog Devices equivalent for MAX202ECSE+G068?
The nearest identified Analog Devices alternatives are MAX202ECSE+ and MAX202ECSE+TG068, both listed as 2/2 RS-232 transceivers in 16-pin SOIC packages. MAX202ECSE+T is another family ordering option documented in an RS-232 replacement comparison. Because suffix changes can affect packaging or qualification, compare the exact ordering table, electrical characteristics, and pin descriptions before releasing a substitution.
Where can I buy MAX202ECSE+G068 online?
Use the Request a Quote form on this XAIPART product page to request availability, lead time, and order handling for MAX202ECSE+G068. The manufacturer ordering information identifies the component as an Analog Devices MAX202ECSE+G068 2/2 RS-232 transceiver in a 16-pin SOIC, supplied in tube packaging. Confirm the requested suffix and packaging arrangement when submitting the inquiry.
What is the price of MAX202ECSE+G068?
Use the Request a Quote form on this page for the current MAX202ECSE+G068 price and quantity availability. The Analog Devices product information identifies the device as a 2/2 RS-232 transceiver in a 16-pin SOIC with a 4.5 V to 5.5 V supply range. Include the required order quantity, tube-packaging preference, and target delivery location in the request for an actionable quotation.
What is the lead time and stock status for MAX202ECSE+G068?
Request the current lead time and stock status through the Request a Quote form on this page. The MAX202ECSE+G068 is identified as an Analog Devices 2/2 RS-232 transceiver in a 16-pin SOIC, with tube packaging specified by the manufacturer ordering information. Providing your required quantity and annual usage enables the distributor to confirm allocation and production scheduling.

Datos de referencia de ingeniería para MAX202ECSE+G068 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MAX202ECSE+G068 when the design needs a 2/2 RS-232 transceiver operating from 4.5 V to 5.5 V in a 16-pin SOIC, particularly when the interface is exposed to electrostatic discharge. MAX202ECSE+ is the closest listed base-family alternative and retains the same 2/2, 5 V, 16-SOIC characteristics; use it when its exact ordering code matches the required electrical, temperature, and delivery configuration. MAX202ECSE+TG068 is another same-footprint family option identified in the manufacturer listings. MAX202ECSE+T provides the same core RS-232 interface for designs whose approved ordering code differs. For any substitution, verify the complete manufacturer ordering table, pin descriptions, and electrical limits. Do not choose based solely on the shared SOIC outline, because ordering suffixes can encode packaging or qualification differences.

Comparación con alternativas

Parámetro Este producto MAX202ECSE+ MAX202ECSE+TG068 MAX202ECSE+T
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-SOIC 16-SOIC - same 16-SOIC - same 16-SOIC - same
Number of Drivers/Receivers 2/2 2/2 2/2 2/2
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V
Protocol RS-232 and V.28 RS-232 and V.28 RS-232 and V.28 RS-232 and V.28
ESD Protection 15 kV 15 kV 15 kV 15 kV

Diferenciadores clave

  • Two transmitters and two receivers in one 16-pin SOIC (frente a MAX202ECSE+)
  • Single 5 V supply operation (frente a MAX202ECSE+TG068)
  • 15 kV ESD-protected E-series interface (frente a MAX202ECSE+T)

Notas de diseño

Place the MAX202ECSE+G068 close to the external serial connector and route the receiver and transmitter paths directly to their respective pins. Keep the 16-pin SOIC footprint free of copper keepouts or tooling conflicts, and use the manufacturer pin-description table to confirm pin 1 orientation. The connector-side ground and signal paths should have a continuous reference plane to minimize noise pickup and ESD-current loops.

Operate the device from a stable 4.5 V to 5.5 V supply, with local high-frequency bypass placed close to the supply pins. Do not assume that the integrated charge pump eliminates all supply-transient requirements; ringing, inadequate source impedance, or an undersized local capacitor can affect transmitter and receiver operation. Follow the capacitor values and layout guidance in the Analog Devices datasheet for the selected configuration.

A shared 16-pin SOIC outline does not by itself prove that another MAX202 ordering code is interchangeable. Before substituting a candidate, compare ENABLE or shutdown polarity, receiver-control pins, temperature grade, ESD level, and package suffix. Also verify the external charge-pump capacitor connections in the schematic and PCB layout; incorrect capacitor values or placement can prevent reliable RS-232 voltage generation.

Keep the RS-232 cable interface physically separated from sensitive analog and high-speed digital paths, and route it away from switching-node areas. Use a continuous ground reference and controlled connector return path to reduce common-mode noise. For industrial installations, evaluate whether additional connector-side surge protection, isolation, or filtering is required beyond the device’s stated 15 kV ESD protection.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The E-series family is listed with 15 kV ESD protection. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements for the exact MAX202ECSE+G068 ordering code were not identified.

Datos verificados el: 2026-11-09 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MAX202ECSE+G068 datasheet MAX202ECSE+G068 pinout MAX202ECSE+G068 datasheet pdf MAX202ECSE+G068 equivalent MAX202ECSE+G068 replacement MAX202ECSE+G068 cross reference MAX202ECSE+G068 footprint MAX202ECSE+G068 price MAX202ECSE+G068 stock Analog Devices MAX202ECSE+G068 MAX202ECSE+G068 vs MAX202ECSE+ MAX202 2/2 RS-232 16-SOIC MAX202ECSE+G068 industrial serial interface MAX202ECSE+G068 tube packaging

Componentes & términos relacionados

Analog Devices MAX202ECSE+G068 MAX202ECSE+ MAX202ECSE+TG068 MAX202ECSE+T RS-232 V.28 RS-232 transceiver line driver line receiver interface IC semiconductor charge-pump circuitry ESD protection 15 kV ESD protection SOIC-16 SOIC package family surface-mount package TTL logic industrial serial communication point-of-sale equipment data acquisition test and measurement 4.5 V to 5.5 V supply
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ