Texas Instruments

MAX202IPWRE4 - 120 kbit/s Dual RS-232 Transceiver | Texas Instruments

N.º de pieza: MAX202IPWRE4 ✓ Activo
5 V Vdss 16-pin TSSOP Package
MOQ: 1 |

MAX202IPWRE4 Descripción general

The Texas Instruments MAX202IPWRE4 is a 5 V dual RS-232 line driver and receiver with ±15 kV ESD protection, operating at up to 120 kbit/s in a 16-pin TSSOP package. The integrated device contains two line drivers, two line receivers, and a dual charge-pump circuit. Its pin-to-pin interface supports the transmission and reception of RS-232 signals between an asynchronous communication controller and a serial-port connector.

An RS-232 transceiver is an interface IC that converts logic-level signals into bipolar RS-232 line levels and converts received line signals back into logic-compatible levels. It belongs to the interface IC hierarchy, where transceivers combine drivers, receivers, and voltage-level conversion for reliable data links. The MAX202IPWRE4 implements this function with integrated charge pumps and external bypass capacitors, reducing the discrete component count required around a conventional RS-232 port.

The principal operating characteristics include a 5 V supply, a maximum data rate of 120 kbit/s, and ±15 kV human-body-model ESD protection on the serial-port connection pins, including ground. The device meets or exceeds TIA/EIA-232-F and ITU v.28 requirements. Two external 0.1 µF capacitors support the charge-pump circuit, while its 2/2 transceiver organization supports two transmit and two receive channels in one package.

Internally, the dual charge-pump circuit generates the positive and negative voltage levels required by RS-232 drivers. The receivers convert those bipolar levels into CMOS-compatible signals for the host controller. This integrated architecture is especially useful for legacy serial equipment, industrial control links, service interfaces, and embedded systems that retain an RS-232 port while using modern digital control logic.

Typical uses include point-to-point asynchronous serial links, instrument-control consoles, barcode and identification equipment, industrial diagnostics, and communication between a host UART and a DB9 or equivalent RS-232 connector. The dual-channel arrangement can serve two independent serial directions or paired command-and-status paths where channel count permits. System designers should also account for the cable, grounding, and connector requirements of the RS-232 standard.

Place each 0.1 µF charge-pump capacitor close to its designated IC pins and provide a low-impedance connection to the device ground. Keep the interface trace routing compact, and route the exposed RS-232 pins only toward the external connector because those nets carry high-voltage transients. A suitable serial connector and protection network should be placed close to the board edge.

This page consolidates the MAX202IPWRE4 electrical characteristics, package information, qualified comparison references, and practical PCB guidance into an engineer-focused guide. It also identifies where the available cross-reference records do not establish enough evidence to claim additional drop-in replacements.

Alternativas directas para MAX202IPWRE4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MAX202IPWRE4 (mismo factor de forma y huella) — difiere en ESD Protection, Mounting Type, Product Type.

Texas Instruments
ESD Protection: ±15 kV
Mounting Type: Surface-mount
Product Type: Dual RS-232 line driver/receiver transceiver
Comparar con MAX202IPWRE4 →

MAX202IPWR

✅ Sustitución directa
📦 16-TSSOP
Same MAX202 family and 16-pin TSSOP interface, while the ordering suffix differs by 2 characters and the grade or packing interpretation must be confirmed

📋 Alternativa de referencia (no en el catálogo)

MAX202CPWR

✅ Sustitución directa
Texas Instruments
📦 16-TSSOP
Dual RS-232 line driver/receiver transceiver · 5 V · 2 · 2 · Full duplex · 120 kbit/s · ±15 kV · Dual

✓ En stock

$0.9023 / unidad

Ver hoja de datos →

MAX202IPWRE4 Especificaciones

Product Type Dual RS-232 line driver/receiver
Transceiver Configuration 2 transmit and 2 receive channels
Tensión de alimentación 5 V
Maximum Data Rate 120 kbit/s
ESD Protection ±15 kV human-body model
RS-232 Standard Compliance TIA/EIA-232-F and ITU v.28
External Charge-Pump Capacitors 0.1 µF
Package Type 16-pin TSSOP
Tipo de montaje Surface mount
Terminal Count 16 terminals
Temperature Grade Industrial grade
Rango de temperatura de funcionamiento -40 °C to +85 °C
Internal Charge Pump Dual charge-pump circuit
Driver Count 2 line drivers
Receiver Count 2 line receivers

Guía de configuración de pines de MAX202IPWRE4 16-pin tssop

Configuración de pines para MAX202IPWRE4 (encapsulado 16-pin tssop). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 16-pin tssop para MAX202IPWRE4

No hay datos detallados de patillaje disponibles para MAX202IPWRE4.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MAX202IPWRE4 es adecuado para 6 aplicacións: Industrial Equipment Serial Interface, Instrument Control Console, Point-to-Point Embedded Serial Link, Legacy Serial Equipment Adapter, Security and Access-Control Diagnostics, Data Acquisition and Control Module.

🏭

Industrial Equipment Serial Interface

The MAX202IPWRE4 fits industrial equipment that retains an RS-232 service or control port alongside a modern embedded controller. Its dual-driver and dual-receiver arrangement can connect two asynchronous UART channels without requiring separate RS-232 line-interface devices. The 5 V supply and 120 kbit/s operating rate suit moderate-speed command, status, and diagnostic traffic, while ±15 kV human-body-model ESD protection strengthens the external connector interface. Designers should use a robust industrial connector, controlled ground routing, and the two required 0.1 µF charge-pump capacitors. The principal trade-off is that RS-232 uses bipolar signaling and point-to-point links, so the cable and grounding arrangement remain part of the EMC and functional design.

🖥️

Instrument Control Console

The MAX202IPWRE4 is appropriate for laboratory and test-instrument consoles that expose an RS-232 command interface to a host computer. The two receive channels can support separate status and response paths, while the two transmit channels can carry commands or requests where the host protocol requires two unidirectional links. At up to 120 kbit/s, the transceiver supports common low- and medium-speed serial-control protocols rather than high-throughput storage transfers. Its integrated charge pump reduces the external support circuitry needed for bipolar RS-232 levels. Place the MAX202 close to the connector, keep the external 0.1 µF capacitors short, and provide a low-impedance ground return to reduce susceptibility to ESD and ground-potential differences.

🔧

Point-to-Point Embedded Serial Link

The MAX202IPWRE4 works well as the physical-layer interface between an embedded UART and a remote RS-232 device when the link is point-to-point and limited to 120 kbit/s. It translates CMOS-compatible UART signaling into RS-232 levels in the transmit direction and performs the reverse conversion on the receive channels. This makes it useful in legacy access-control equipment, test fixtures, and service interfaces where the host processor lacks native RS-232 electrical drivers. The dual-channel structure can reduce component count when both directions require separate logic signals. Designers must observe the RS-232 voltage polarity, connector pinout, and cable limitations, and should verify that the UART baud rate and line timing remain appropriate for the connected peripheral.

⚙️

Legacy Serial Equipment Adapter

The MAX202IPWRE4 supports adapters that preserve compatibility with older RS-232 equipment while exposing a modern processor or controller. Its two drivers and receivers permit more flexible channel allocation than a single-channel interface, and the 5 V operation allows integration into 5 V mixed-signal systems. The 120 kbit/s ceiling is suitable for configuration, command, and diagnostic traffic commonly found on legacy equipment. Use the manufacturer's pin-description table to implement the connector mapping, and ensure that unused receiver inputs are handled according to the device documentation. The key engineering consideration is that software compatibility does not guarantee electrical interchangeability: connector gender, signal names, grounding, and RS-232 level conventions must be checked independently.

🔒

Security and Access-Control Diagnostics

The MAX202IPWRE4 can interface diagnostic or programming ports in access-control and security equipment that use asynchronous RS-232 communication. The dual transmit and receive channels support command, response, or paired signal arrangements, while 120 kbit/s is more than adequate for typical configuration traffic. Its ±15 kV human-body-model ESD protection is especially relevant where an external serial connector may be touched or connected in uncontrolled environments. The protection rating does not eliminate the need for a good connector, chassis grounding, and normal board-level ESD precautions elsewhere. Keep the exposed driver and receiver traces away from sensitive digital and analog nets, and route the RS-232 connector interface directly toward the board edge for short transient paths.

📊

Data Acquisition and Control Module

The MAX202IPWRE4 is suitable for data-acquisition modules that communicate with an external controller, programming fixture, or service computer over RS-232. The 120 kbit/s maximum accommodates periodic measurements, commands, and acknowledgment traffic, while the dual-channel arrangement can separate control and status traffic. Its integrated dual charge pump avoids a discrete negative-voltage generator, simplifying the power and layout design, but two external 0.1 µF capacitors remain mandatory. Ensure the transceiver ground connects to the circuit reference ground through a low-impedance path and assess whether galvanic isolation is required when the connected equipment may sit at a different ground potential. For longer cables or noisy environments, cable shielding and careful connector grounding can be as important as IC selection.

What are the key specifications of MAX202IPWRE4 that engineers should know?
The MAX202IPWRE4 is a 5 V, dual RS-232 transceiver rated for data rates up to 120 kbit/s, with two drivers, two receivers, and ±15 kV human-body-model ESD protection. According to the Texas Instruments MAX202 product documentation, the device meets TIA/EIA-232-F and ITU v.28 requirements and uses two external 0.1 µF capacitors. It is packaged in a 16-pin TSSOP for industrial-temperature operation from -40 °C to +85 °C.
Where to buy MAX202IPWRE4 online?
The MAX202IPWRE4 can be requested through XAIPART's Request a Quote form on this page. The form is the proper route for current commercial terms, stock confirmation, and lead time without relying on a static price that may quickly become obsolete. The exact Texas Instruments manufacturer part number is MAX202IPWRE4, and the requested configuration is the 16-pin TSSOP industrial-temperature device.
What is the price of MAX202IPWRE4?
Use the Request a Quote form on this page to obtain the current price for MAX202IPWRE4. The quote workflow accounts for the requested quantity, current inventory, and fulfillment conditions. No fixed price is published in this technical record because commercial pricing for electronic components changes with quantity and market availability.
What is the lead time for MAX202IPWRE4?
The current lead time for MAX202IPWRE4 should be confirmed through XAIPART's Request a Quote form. The form allows the required quantity and delivery conditions to be entered directly, enabling an availability and lead-time response for the exact 16-pin TSSOP ordering code. Manufacturing and inventory status should be confirmed at the time of quotation rather than inferred from a distributor category page.
Is MAX202IPWRE4 in stock?
Current stock for MAX202IPWRE4 is confirmed through XAIPART's Request a Quote form on this page. Submit the required quantity and packaging preference to receive an availability response for the exact Texas Instruments part number. The device is identified as an active 16-pin TSSOP interface IC, but live inventory remains time-dependent and should not be assumed from product-page presence alone.
What is the difference between MAX202IPWRE4 and MAX202CPWR?
The MAX202IPWRE4 and MAX202CPWR belong to the same MAX202 dual RS-232 transceiver family and are compared in the available cross-reference records. The MAX202IPWRE4 is identified as an industrial-temperature 16-pin TSSOP device, while MAX202CPWR uses a different ordering suffix and temperature-grade coding. Before exchanging them, confirm the exact electrical ratings, temperature range, package drawing, and pin functions in the manufacturer documentation for the proposed part.
When should I choose MAX202IPWRE4 over MAX202IPWR?
Choose MAX202IPWRE4 when the orderable grade and delivery format specifically require the RE4 suffix; choose MAX202IPWR when its grade and packaging are acceptable for the design. Both identifiers appear in the MAX202 family, but the exact ordering-code meaning should be checked against the manufacturer labeling information. The PCB decision should be based on a confirmed 16-pin TSSOP footprint, identical voltage ratings, and matching temperature qualification.
What is the best drop-in replacement for MAX202IPWRE4?
The best drop-in replacement must use the same 16-pin TSSOP footprint and preserve the 5 V supply, dual-driver and dual-receiver configuration, 120 kbit/s data-rate class, and ±15 kV ESD rating. The available cross-reference records identify MAX202CPWR and MAX202IPWR as related candidates, but they do not establish every package, grade, and ordering-code detail required for an unconditional replacement claim. Verify the candidate datasheet and pinout before approving a substitution.
Can MAX202CPWR replace MAX202IPWRE4?
MAX202CPWR can be considered for a MAX202IPWRE4 replacement only after its package, temperature grade, and ordering suffix are confirmed against the proposed production design. A cross-reference record directly compares MAX202CPWR with MAX202IPWRE4, establishing family relationship rather than guaranteed interchangeability. Confirm that the candidate retains a 16-pin TSSOP footprint and the required 5 V, 120 kbit/s, and ±15 kV ESD characteristics before substitution.
Where to download the MAX202IPWRE4 datasheet PDF?
Download the manufacturer documentation from the Texas Instruments MAX202 product page at https://www.ti.com/lit/gpn/MAX202. That page is the official source for the MAX202 family documentation covering the dual line drivers, dual line receivers, charge-pump circuit, external capacitors, RS-232 requirements, and ESD protection. Use the pin-description and ordering tables in that document when assigning PCB functions.
Where to find the MAX202IPWRE4 pinout?
The MAX202IPWRE4 pinout is defined in the pin-description section of the Texas Instruments MAX202 family datasheet at https://www.ti.com/lit/gpn/MAX202. The device uses a 16-pin TSSOP package, and the manufacturer documentation should be used to map supply, ground, driver outputs, receiver inputs, charge-pump capacitors, and enable-related functions. Follow the numbered pin drawing rather than relying on a generic RS-232 transceiver footprint.
What is MAX202IPWRE4 used for?
The MAX202IPWRE4 is used to interface logic-level UART signals with bipolar RS-232 ports. Its two drivers and two receivers support dual RS-232 channels, while the integrated dual charge pump supplies the positive and negative levels required by the drivers. Typical uses include industrial diagnostics, instrument-control consoles, embedded service interfaces, legacy serial equipment, and point-to-point asynchronous communication links.
Does MAX202IPWRE4 support 120 kbit/s RS-232 communication?
Yes, the MAX202IPWRE4 supports operation up to 120 kbit/s. The Texas Instruments MAX202 documentation identifies a maximum operating speed of 120 kbit/s and describes the device as a 5 V dual RS-232 line driver and receiver. Actual system throughput also depends on the UART, cable, connector, signal integrity, grounding, and the external charge-pump capacitor placement.
What ESD protection does MAX202IPWRE4 provide?
The MAX202IPWRE4 provides ±15 kV human-body-model ESD protection on the RS-232 connection pins, including ground. According to the Texas Instruments MAX202 documentation, this protection meets or exceeds the specified requirements of TIA/EIA-232-F and ITU v.28. The rating applies to the designated serial-port pins and should not be interpreted as unqualified protection for every internal logic or supply pin.
What can replace MAX202IPWRE4?
MAX202IPWR and MAX202CPWR are the closest supported candidates for evaluating as MAX202IPWRE4 replacements because the available cross-reference records place them in the same MAX202 family. An engineering approval requires matching 16-pin TSSOP pin assignments, 5 V operation, two transmitters, two receivers, at least 120 kbit/s performance, and equivalent ±15 kV ESD protection. Confirm temperature grade and suffix-specific ordering requirements as well.

Datos de referencia de ingeniería para MAX202IPWRE4 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the MAX202IPWRE4 when the design requires a 5 V dual RS-232 interface with two transmitters, two receivers, operation up to 120 kbit/s, and ±15 kV human-body-model ESD protection in a 16-pin TSSOP package. MAX202IPWR is the closest same-family ordering candidate when its suffix-specific grade and packaging are acceptable. MAX202CPWR is also worth evaluating when its confirmed temperature grade matches the deployment environment and the manufacturer ordering information supports interchangeability. Do not select a generic RS-232 transceiver solely by package count; verify driver polarity, receiver thresholds, enable behavior, charge-pump capacitor requirements, and pin assignments. For a production substitution, confirm the operating-temperature range, ESD rating, data-rate rating, and package drawing for the exact candidate ordering code. The MAX202IPWRE4 is strongest when the full -40 °C to +85 °C industrial range and manufacturer-specific ordering code are required.

Comparación con alternativas

Parámetro Este producto MAX202IPWR MAX202CPWR
Brand Texas Instruments Texas Instruments Texas Instruments
Package 16-TSSOP 16-TSSOP 16-TSSOP
Product Type Dual RS-232 line driver/receiver MAX202 dual RS-232 line driver/receiver MAX202 dual RS-232 line driver/receiver
Transceiver Configuration 2 transmit and 2 receive channels 2 transmit and 2 receive channels 2 transmit and 2 receive channels
Supply Voltage 5 V 5 V 5 V
Maximum Data Rate 120 kbit/s 120 kbit/s 120 kbit/s
ESD Protection ±15 kV human-body model ±15 kV human-body model ±15 kV human-body model
External Charge-Pump Capacitors 0.1 µF 0.1 µF 0.1 µF
RS-232 Compliance TIA/EIA-232-F and ITU v.28 TIA/EIA-232-F and ITU v.28 TIA/EIA-232-F and ITU v.28

Diferenciadores clave

  • Integrated dual-channel interface in a compact package (frente a MAX202CPWR)
  • Specified industrial-temperature operating range (frente a MAX202CPWR)
  • 120 kbit/s operation with ±15 kV ESD protection (frente a MAX202IPWR)

Notas de diseño

Place the two external 0.1 µF charge-pump capacitors immediately beside their designated MAX202 pins, using the shortest possible traces and an adjacent ground return. This is especially important because charge-pump behavior and ESD-event response can be affected by excessive loop area. Do not relocate the capacitors to the far side of the PCB, and do not substitute them for the values specified in the manufacturer MAX202 documentation.

Do not treat the MAX202IPWRE4 as a UART or a physical connector. The IC provides RS-232 electrical conversion only; baud-rate generation, framing, parity, flow control, and protocol handling remain the responsibility of the host controller. Also avoid connecting TTL or CMOS UART signals directly to the driver outputs, because the transceiver expects RS-232 bipolar levels on those external pins.

Route the external RS-232 pins toward the board edge and connector without passing beneath or between sensitive analog and digital nodes. Maintain a low-impedance ground connection between the transceiver and the interface connector, and use the connector shell or chassis-ground strategy appropriate to the enclosure. These measures reduce transient-current paths and improve immunity to ground-potential differences and externally applied ESD events.

The MAX202IPWRE4 and MAX202CPWR share the MAX202 family and a 16-pin TSSOP interface, but ordering suffixes can encode different temperature grades or delivery configurations. Before replacing one with another, compare the exact ordering tables, temperature ratings, ESD ratings, and package drawings. A matching footprint alone is not sufficient when a design must operate across a specific industrial temperature range.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

TIA/EIA-232-F and ITU v.28 are interface standards documented for the MAX202 family, not product-level environmental compliance certifications. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the manufacturer references and therefore remain unknown.

Datos verificados el: 2026-11-09 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MAX202IPWRE4 datasheet MAX202IPWRE4 pinout MAX202IPWRE4 datasheet pdf MAX202IPWRE4 16-TSSOP MAX202IPWRE4 120 kbit/s MAX202IPWRE4 ESD protection MAX202IPWRE4 equivalent MAX202IPWRE4 replacement MAX202IPWRE4 vs MAX202CPWR Texas Instruments MAX202IPWRE4 MAX202IPWRE4 RS-232 transceiver MAX202IPWRE4 price MAX202IPWRE4 stock MAX202IPWRE4 application circuit

Componentes & términos relacionados

Texas Instruments MAX202IPWRE4 MAX202IPWR MAX202CPWR RS-232 transceiver RS-232 line driver RS-232 line receiver interface IC CMOS-compatible logic charge pump dual charge-pump circuit TIA/EIA-232-F ITU v.28 120 kbit/s ±15 kV ESD protection 16-pin TSSOP TSSOP package family surface-mount package industrial temperature grade external 0.1 µF capacitor asynchronous serial communication UART point-to-point serial link legacy serial equipment RoHS
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ