Maxim Integrated

MAX232BEAWE+T - 2/2 RS-232 Transceiver | Maxim Integrated

N.º de pieza: MAX232BEAWE+T ✓ Activo
16-pin SOIC Package
MOQ: 1 |

MAX232BEAWE+T Descripción general

The Maxim Integrated MAX232BEAWE+T is a 2/2 RS-232 transceiver, meaning it combines two line drivers and two line receivers in one device. The integrated circuit is supplied in a 16-pin SOIC package and is intended for bidirectional serial-interface designs requiring conversion between RS-232 signal levels and CMOS/TTL-compatible logic levels. Its two-driver, two-receiver arrangement allows two data channels to share one physical interface circuit.

An RS-232 transceiver is an interface integrated circuit used to connect logic-level equipment to a serial port. The driver section converts low-voltage digital signals into RS-232-compatible levels, while the receiver section converts incoming RS-232 signals back into logic-compatible voltages. This transceiver belongs to the broader semiconductor hierarchy of interface ICs, line drivers and receivers, communication interfaces, and signal-conditioning semiconductors.

The MAX232BEAWE+T provides a practical way to add two RS-232 channels without using separate driver and receiver packages. Its 16-SOIC format supports conventional surface-mount PCB assembly. The manufacturer documentation identifies the component as a 2/2 full RS-232 transceiver, allowing it to support both transmission and reception functions in systems such as industrial controllers, data-acquisition equipment, service interfaces, and embedded serial-port equipment.

The MAX232 family is commonly used when legacy RS-232 equipment must communicate with a modern digital system. In a typical interface, the MAX232BEAWE+T sits between a host UART and an external RS-232 connector. Logic-level transmit signals enter the drivers, and the receivers return logic-level signals from the connector to the host. The IC therefore handles voltage translation at the physical interface while the UART handles character framing and serial protocol behavior.

Typical uses include point-to-point control links, configuration interfaces, instrument-control ports, industrial equipment communication, and embedded service connections. Two integrated channels can reduce the component count compared with separate single-channel transceiver circuits. Board designers must still account for the external charge-pump capacitors, signal grounding, connector protection, cable routing, and the electrical limits that apply to the selected RS-232 standard and connected equipment.

For layout, place the device close to the RS-232 connector or interface barrier, keep the driver and receiver routes short, and connect the charge-pump capacitor network exactly as shown in the manufacturer datasheet. The interface should also follow the recommended grounding and protection arrangement for the installed connector. Component values, electrical limits, timing characteristics, and environmental ratings should be confirmed against the datasheet for the exact MAX232BEAWE+T ordering code before release to production.

This page combines the exact MAX232BEAWE+T device identification, package information, interface-application guidance, verified drop-in cross-reference options, and practical PCB considerations in a format intended to accelerate engineering selection and implementation.

Alternativas directas para MAX232BEAWE+T — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MAX232BEAWE+T (mismo factor de forma y huella) — difiere en Package, Number of Drivers, Number of Receivers, Product Type.

Analog Devices
Package: 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width)
Number of Drivers: 2
Number of Receivers: 2
Comparar con MAX232BEAWE+T →
Analog Devices
Product Type: RS-232 transceiver interface IC
Comparar con MAX232BEAWE+T →

MAX232ESE+T

✅ Sustitución directa
Analog Devices
📦 16-SOIC
RS-232 transceiver interface IC · 2 drivers and 2 receivers · 4.5 V to 5.5 V · 120 kbps · EIA/TIA-232E and CCITT V.28 · V.28 and V.24 · On-chip capacitive voltage generator · 16 pins

Consulte el precio

Ver hoja de datos →

MAX232ACSE+T

✅ Sustitución directa
Analog Devices
📦 16-SOIC
RS-232 Transceiver (2 Driver / 2 Receiver) · 200 kbps · 4.5 V to 5.5 V · 2 · 2 · Full · ±30 V (HBM ESD tolerance on RS-232 inputs) · 0 °C to +70 °C (C grade)

Consulte el precio

Ver hoja de datos →

MAX232BEAWE+T Especificaciones

Product Type RS-232 transceiver
Transceiver Configuration 2/2 full duplex
Number of Drivers 2 drivers
Number of Receivers 2 receivers
Encapsulado 16-pin SOIC
Tipo de montaje Surface mount

Guía de configuración de pines de MAX232BEAWE+T 16-pin soic

Configuración de pines para MAX232BEAWE+T (encapsulado 16-pin soic). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 16-pin soic para MAX232BEAWE+T

No hay datos detallados de patillaje disponibles para MAX232BEAWE+T.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MAX232BEAWE+T es adecuado para 6 aplicacións: Embedded UART Serial Interface, Industrial Controller Service Port, Data-Acquisition Instrument Interface, Point-to-Point Control Link, Instrument Configuration Port, Legacy Serial Connectivity.

🔧

Embedded UART Serial Interface

The MAX232BEAWE+T fits an embedded controller that must communicate through a conventional RS-232 port. Its two drivers and two receivers support two bidirectional channels, while the 16-SOIC package keeps the interface compact for surface-mount assembly. Connect the host UART signals to the logic-side pins and the RS-232 connector to the line-side pins. The external charge-pump network remains essential, so component values and placement should follow the manufacturer application circuit exactly.

🏭

Industrial Controller Service Port

The MAX232BEAWE+T is useful for a service or configuration port on an industrial controller that must retain compatibility with RS-232 service equipment. Two integrated channels can support separate data and control connections when the surrounding software or equipment architecture benefits from more than one line. The device handles only physical-level translation, so protocol framing remains the responsibility of the host UART. Connector protection, grounding, and operating-temperature requirements should be verified against the installation environment.

🖥️

Data-Acquisition Instrument Interface

The MAX232BEAWE+T can connect laboratory or field data-acquisition equipment to a computer or controller through RS-232. Two full-duplex channels provide transmit and receive paths for commands and measurements in systems that do not require a more modern differential interface. Its 2/2 transceiver organization reduces the number of interface packages on the board. Designers should check supported data rate, cable limitations, signal levels, and grounding in the manufacturer documentation before finalizing the connection.

🌐

Point-to-Point Control Link

The MAX232BEAWE+T suits short point-to-point control links between legacy RS-232 equipment and a modern logic controller. The two drivers and two receivers allow bidirectional communication while the 16-SOIC package supports automated PCB assembly. The host UART generates and interprets characters, whereas the MAX232 performs RS-232 line-level conversion. Place the interface circuitry near the connector, route the serial nets away from sensitive analog paths, and apply suitable protection at an exposed user-accessible port.

📺

Instrument Configuration Port

The MAX232BEAWE+T can provide a dedicated RS-232 configuration path for test instruments, peripheral controllers, and diagnostic equipment. One channel can carry setup commands while another supports returned status or measurement data, reducing component count compared with two single-direction interface packages. The design must preserve the voltage levels and timing required by both the host UART and attached equipment. Confirm the exact pin mapping, external capacitors, and maximum operating conditions in the manufacturer datasheet.

🔧

Legacy Serial Connectivity

The MAX232BEAWE+T is appropriate for maintaining a legacy RS-232 connection when redesigning equipment around a modern embedded platform. Two full RS-232 channels provide a straightforward interface between logic-level controller pins and a DB-style or smaller connector arrangement. Because the transceiver does not implement the communication protocol, software must manage framing, parity, handshaking, and timing. Validate connector pinouts and signal-ground practices before connecting two powered systems to avoid ground-related damage.

What is the MAX232BEAWE+T?
The MAX232BEAWE+T is a 2/2 full RS-232 transceiver with two drivers and two receivers in a 16-pin SOIC package. According to the Maxim Integrated product documentation, it is designed for bidirectional RS-232 data interfaces and can translate between logic-level signals and RS-232 line levels. It is appropriate for embedded serial ports, control systems, and data-acquisition equipment using a conventional RS-232 interface.
How many RS-232 channels does MAX232BEAWE+T support?
The MAX232BEAWE+T supports two full-duplex RS-232 channels because it contains two drivers and two receivers. According to the manufacturer listing, the device is categorized as a 2/2 transceiver. Each channel can combine one transmitter and one receiver, allowing two bidirectional serial links to be implemented with one 16-SOIC package instead of separate single-channel interface circuits.
What package does MAX232BEAWE+T use?
The MAX232BEAWE+T uses a 16-pin SOIC package for surface-mount assembly. The manufacturer product listing identifies the package as 16-SOIC. The ordering suffix WE denotes the wide SOIC package configuration, while the trailing + identifies the lead-free, tape-and-reel ordering option. Confirm the package drawing, footprint, and soldering profile against the manufacturer datasheet.
Where can I download the MAX232BEAWE+T datasheet PDF?
The MAX232BEAWE+T datasheet PDF is available through the Maxim Integrated product documentation for the MAX232/MAX241 family. The document contains the electrical characteristics, truth tables, RS-232 driver and receiver specifications, charge-pump capacitor requirements, and the recommended application circuit. Use the device-specific ordering information in the datasheet to verify environmental ratings and package dimensions for MAX232BEAWE+T.
Where can I find the MAX232BEAWE+T pinout?
The MAX232BEAWE+T pinout is found in the pin-description and typical-application sections of the Maxim Integrated MAX232/MAX241 datasheet. The 16-SOIC drawing identifies the supply, ground, receiver, driver, and charge-pump connections. Assign PCB tracks from that manufacturer pin-description table and verify numbering against the selected package orientation rather than inferring connections from another interface IC.
How do I use MAX232BEAWE+T with a UART?
Connect the UART transmit line to one MAX232 driver input, route the corresponding driver output to the RS-232 connector, and connect the matching receiver input from the connector to the UART receive line. The second driver and receiver can serve another channel. According to the manufacturer application guidance, place the recommended external charge-pump capacitors near the device and follow the shown grounding arrangement.
Does MAX232BEAWE+T need external charge-pump capacitors?
The MAX232BEAWE+T application design uses external charge-pump capacitors to generate the bipolar voltage required by the RS-232 drivers. Capacitor values, voltage rating, ESR requirements, and placement guidance must be taken from the manufacturer datasheet. Keep these components close to their designated pins, provide a short return path, and account for their startup and supply-bypass behavior in the layout.
What can replace MAX232BEAWE+T?
The MAX232ESE+T and MAX232ACSE+T are identified in cross-reference results as alternatives to the MAX232BEAWE+T. Both are Maxim Integrated 2/2 RS-232 transceiver options associated with the 16-SOIC family, making them the most relevant candidates for a pin-compatible redesign review. Confirm supply voltage, electrical limits, temperature range, and exact pin mapping in the manufacturer datasheets before substitution.
What is the best Maxim Integrated equivalent for MAX232BEAWE+T?
The MAX232ESE+T is the closest Maxim Integrated alternative identified for a drop-in review of MAX232BEAWE+T. The cross-reference record associates it with the same MAX232 transceiver family and 2/2 RS-232 interface role. Confirm that its electrical ratings and pin assignment satisfy the original design, because package similarity alone does not guarantee identical operating limits or temperature coverage.
When should I choose MAX232BEAWE+T over MAX232ESE+T?
Choose MAX232BEAWE+T when the original design is qualified around that exact ordering code and its package, temperature range, and electrical limits are already validated. Consider MAX232ESE+T only after a direct manufacturer-datasheet comparison confirms compatible supply voltage, logic thresholds, RS-232 output levels, data rate, and pinout. The cross-reference identifies a candidate relationship but does not erase the need for application-specific verification.
Is MAX232BEAWE+T suitable for industrial equipment interfaces?
The MAX232BEAWE+T is suitable for industrial equipment interfaces when its documented operating temperature, electrical ratings, grounding, and protection requirements fit the installed environment. Its two RS-232 channels can connect a controller, test instrument, or service port to a host UART. Industrial qualification still depends on the exact operating grade and system-level EMC, surge, and ESD requirements.
What is the difference between MAX232BEAWE+T and MAX232ACSE+T?
The primary confirmed difference is the exact MAX232 family ordering code and its associated option set; the cross-reference record provides no complete parameter table for this comparison. Both devices occupy the 2/2 RS-232 transceiver role and appear in 16-SOIC-related comparisons. Before choosing MAX232ACSE+T, compare supply voltage, driver and receiver thresholds, data rate, temperature range, pin names, and external capacitor requirements directly from the manufacturer datasheets.
How should MAX232BEAWE+T be protected at an RS-232 connector?
Protect the connector side with an appropriate low-capacitance protection network and maintain a defined chassis or signal-ground path. Protection devices must be selected for the working voltage, surge environment, and data rate rather than copied from a generic RS-232 circuit. Place protection close to the connector and keep it electrically distant from sensitive logic nodes, while following the interface grounding strategy appropriate to the installation.
Can MAX232BEAWE+T operate from a 3.3 V system?
Whether MAX232BEAWE+T can operate from a 3.3 V system depends on the exact supply-voltage and logic-threshold ratings in the manufacturer datasheet. The product identification confirms a 2/2 RS-232 transceiver but does not itself establish 3.3 V compatibility. Verify the supply range, input thresholds, output levels, and charge-pump behavior against the exact ordering code before connecting it to a 3.3 V UART.
Is MAX232BEAWE+T in stock and how long is the lead time?
Current stock and production lead time should be requested through the Request a Quote form on this page. The part is identified as a MAX232BEAWE+T 2/2 RS-232 transceiver in a 16-SOIC package, but stock can change independently of this technical record. Include your required quantity, reel packaging needs, and target delivery date so the manufacturer can confirm availability and scheduling.

Datos de referencia de ingeniería para MAX232BEAWE+T — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MAX232BEAWE+T when the board is built around this exact Maxim Integrated ordering code and its validated electrical ratings, temperature range, and 16-SOIC footprint match the design. It is particularly suitable when two RS-232 channels are required in a compact embedded, controller, instrument, or data-acquisition design. Consider MAX232ESE+T when supply availability, lifecycle, or purchasing conditions favor another member of the same interface family, but only after checking its datasheet for identical logic thresholds, supply requirements, data rate, and pin mapping. Consider MAX232ACSE+T under the same verification process because it also appears in direct cross-reference comparisons. Neither alternative should be treated as interchangeable solely because it uses the same package outline. The essential checks are electrical, thermal, timing, and pin-level compatibility. For a new design, also evaluate whether the application really requires RS-232; modern differential interfaces may offer better noise immunity, cable reach, and integration.

Comparación con alternativas

Parámetro Este producto MAX232ESE+T MAX232ACSE+T
Package 16-SOIC 16-SOIC 16-SOIC
Brand Maxim Integrated Maxim Integrated Maxim Integrated
Product Type RS-232 transceiver RS-232 transceiver RS-232 transceiver
Driver Count 2 2 2
Receiver Count 2 2 2
Channel Configuration 2/2 full duplex 2/2 full duplex 2/2 full duplex

Diferenciadores clave

  • Two complete RS-232 channels in one package (frente a MAX232ESE+T)
  • Single-package dual-channel interface (frente a MAX232ACSE+T)
  • Surface-mount integration (frente a MAX232ESE+T)

Notas de diseño

Place the MAX232BEAWE+T and its external charge-pump capacitors close to the RS-232 connector-side circuitry. Follow the manufacturer pin-description table and typical application diagram exactly for capacitor connections. Keep the route from the RS-232 pins to the connector short, avoid routing driver outputs beneath sensitive analog circuitry, and provide a direct return connection to the interface ground.

Do not assume that every MAX232-family ordering code has identical supply voltage, logic thresholds, temperature range, or package dimensions. Validate MAX232BEAWE+T against the schematic requirements and compare the exact pin names and limits before releasing a substitute to production. Also verify that the external capacitor values and ESR meet the manufacturer recommendations rather than copying a generic charge-pump network.

RS-232 driver outputs are high-voltage, high-slew signals and should be confined to the connector-side region of the PCB. Keep them away from clocks, sensors, analog inputs, and crystal circuits. Use a defined chassis or signal-ground strategy, keep cable protection close to the connector, and test the assembled system for conducted and radiated emissions under its intended operating conditions.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The leading + marking indicates the manufacturer's lead-free ordering option, but no explicit RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals statement is included in the technical records. Confirm these attributes with the manufacturer using the exact ordering code.

Datos verificados el: 2026-11-09 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MAX232BEAWE+T datasheet MAX232BEAWE+T pinout MAX232BEAWE+T datasheet pdf MAX232BEAWE+T equivalent MAX232BEAWE+T replacement MAX232BEAWE+T cross reference MAX232BEAWE+T vs MAX232ESE+T MAX232BEAWE+T vs MAX232ACSE+T MAX232BEAWE+T application circuit MAX232BEAWE+T 16-SOIC footprint Maxim Integrated MAX232BEAWE+T MAX232BEAWE+T price

Componentes & términos relacionados

Maxim Integrated MAX232BEAWE+T MAX232ESE+T MAX232ACSE+T RS-232 transceiver RS-232 interface IC line driver line receiver full-duplex transceiver CMOS logic TTL logic UART charge-pump capacitor 16-SOIC SOIC family surface-mount package SMD semiconductor industrial communication data acquisition embedded serial interface ESD protection EMI
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ