MAX232ECNG4 - Dual RS-232 Transceiver | Texas Instruments
N.º de pieza: MAX232ECNG4 ✓ ActivoMAX232ECNG4 Descripción general
An RS-232 transceiver is an interface IC that translates low-voltage CMOS or TTL-compatible logic levels to and from the higher-voltage bipolar signaling used by RS-232. A complete interface path commonly includes a transceiver for the main serial connection, a driver for additional lines, and a receiver for incoming data. The MAX232ECNG4 belongs to the RS-232 interface level within the broader semiconductor and interface IC hierarchy.
The principal feature of the MAX232ECNG4 is its integrated 2-transceiver arrangement. One channel can transmit while the other receives, allowing full-duplex communication with only two device channels. Integrated ESD protection is particularly useful at exposed connector pins, where static discharge from cables and connected equipment can damage a communications interface. The through-hole 16-pin package also supports conventional PCB assembly and connector-routing layouts.
This device is associated with the MAX232 product family from Maxim, which was acquired by Analog Devices and is now offered through Texas Instruments. The ECNG4 ordering code identifies the specific commercial-temperature, 16-pin plastic DIP configuration. Exact electrical ratings, driver and receiver thresholds, charge-pump performance, supply limits, and environmental classifications must be confirmed in the manufacturer datasheet before the circuit is released for production.
Typical uses include industrial control consoles, data-acquisition equipment, test systems, service interfaces, and embedded serial ports. The MAX232ECNG4 can also pair with dedicated RS-232 line drivers or receivers when a system requires more than two channels or an RS-485-to-RS-232 conversion stage. Connection to a modern host generally requires a logic-level UART, while the opposite side connects to an RS-232 connector and its external signal ground.
The principal design consideration is ensuring the transceiver operates with valid logic levels and supply voltage throughout startup, data transmission, and cable disconnection. Decoupling capacitors, cable routing, signal-ground handling, and ESD exposure all affect reliability. Confirm the required charge-pump capacitor values, driver slew behavior, receiver thresholds, and maximum data rate in the manufacturer datasheet before finalizing the layout.
This product record combines interface identification, package information, application guidance, comparison criteria, and practical design notes. It also distinguishes verified drop-in alternatives by package, temperature grade, and functional fit so engineers can narrow replacements without treating every similar RS-232 transceiver as an automatic substitution.
Alternativas directas para MAX232ECNG4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MAX232ECNG4 (mismo factor de forma y huella) — difiere en Package, RoHS Status, Supply Voltage, Data Rate, ESD Protection.
MAX232EPE
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →MAX232CPE
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →MAX232ACPE+
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →MAX232AAPE
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MAX232ECNG4 Especificaciones
| Transceiver Configuration | 2 transmit and 2 receive channels |
| Tipo de interfaz | RS-232 |
| Driver and Receiver Count | 2 drivers and 2 receivers |
| ESD Protection | Integrated ESD protection |
| Package Type | 16-pin plastic dual in-line package |
| Package Length | 0.300 in |
| Package Body Width | 7.62 mm |
| Package Pitch | 7.62 mm |
| Estilo de montaje | Through-hole |
Guía de configuración de pines de MAX232ECNG4 7.62 mm
Configuración de pines para MAX232ECNG4 (encapsulado 7.62 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para MAX232ECNG4.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MAX232ECNG4 es adecuado para 6 aplicacións: Industrial Control Console, Data-Acquisition Equipment, Embedded Service Interface, Test and Measurement Instrument, RS-232 Port Expansion, Legacy Equipment Communication.
Industrial Control Console
The MAX232ECNG4 is appropriate for a control console that exchanges commands and status data with an RS-232 service port. Its two transceiver channels allow a full-duplex connection between the controller logic and an external RS-232 connector, while integrated ESD protection helps protect connector-facing pins from cable-borne static discharge. The 16-PDIP package supports through-hole assembly and conventional routing between the controller and interface connector. Before release, verify the exact supply voltage, temperature grade, charge-pump capacitor values, and driver and receiver thresholds in the manufacturer datasheet, then include protection appropriate to the field-cable environment.
Recomendado
Data-Acquisition Equipment
The MAX232ECNG4 can bridge a modern controller or test engine to an RS-232 acquisition unit when the design requires one receive and one transmit path. Its dual-driver and dual-receiver arrangement supports two full-duplex channels, and integrated ESD protection is useful when the serial line reaches a user-accessible connector. The 16-PDIP format provides a straightforward through-hole layout with a 7.62 mm row spacing. Confirm the MAX232ECNG4 maximum data rate, input thresholds, output slew behavior, supply range, and capacitor requirements in the datasheet before selecting cable length and baud rate.
Recomendado
Embedded Service Interface
The MAX232ECNG4 fits an embedded service port used for configuration, diagnostics, or firmware retrieval when an RS-232 physical interface is required. The transceiver converts logic-level UART signals to RS-232 levels, while its integrated ESD protection helps manage static discharge at an external connector. Its two channels can provide transmit and receive functions for a full-duplex link without requiring separate line-driver and receiver packages. The designer should verify signal-ground isolation, cable routing, supply-noise behavior, and the device's exact operating-temperature limits before deploying the interface into temperature-controlled or exposed equipment.
Recomendado
Test and Measurement Instrument
The MAX232ECNG4 can provide the RS-232 communication path in a bench instrument or programmable test fixture. Two integrated transceiver channels support full-duplex operation, and integrated ESD protection is beneficial when users attach external leads to the instrument. The 16-PDIP package is practical for fixture construction and through-hole prototypes because it provides generous spacing between pins. Before choosing the baud rate and cable length, consult the manufacturer datasheet for the maximum data rate, receiver thresholds, driver slew rate, supply requirements, and recommended charge-pump capacitance.
Recomendado
RS-232 Port Expansion
The MAX232ECNG4 can expand a host with limited serial capability when two additional RS-232 channels are required. Its integrated transmitters and receivers reduce the number of discrete interface components needed for a full-duplex port, and the through-hole 16-PDIP package simplifies assembly where a small logic footprint is not essential. The design must still include the manufacturer's specified charge-pump capacitors, proper bypass capacitance, and correct signal-ground connection. Verify that all software-controlled line states remain valid at startup and during cable disconnection.
Recomendado
Legacy Equipment Communication
The MAX232ECNG4 is useful when a modern controller must communicate with older RS-232 equipment through a physical serial port. Its 2/2 transceiver arrangement supports bidirectional data transfer, while the integrated ESD protection helps limit interface damage from electrostatic discharge on connected cables. The 16-PDIP package allows direct PCB replacement of a conventional through-hole interface circuit and is well suited to equipment designed around axial or through-hole components. Check the legacy device's logic polarity, baud rate, handshake requirements, connector pinout, and signal-ground reference before enabling communication.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MAX232ECNG4 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MAX232EPE | MAX232CPE | MAX232ACPE | MAX232AAPE |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-PDIP (0.300 in, 7.62 mm) | 16-PDIP (0.300 in, 7.62 mm) | 16-PDIP (0.300 in, 7.62 mm) | 16-PDIP (0.300 in, 7.62 mm) | 16-PDIP (0.300 in, 7.62 mm) |
| Transceiver Configuration | 2 transmit and 2 receive channels | 2 transmit and 2 receive channels | 2 transmit and 2 receive channels | 2 transmit and 2 receive channels | 2 transmit and 2 receive channels |
| Interface Type | RS-232 | RS-232 | RS-232 | RS-232 | RS-232 |
| ESD Protection | Integrated ESD protection | Integrated ESD protection | Integrated ESD protection | Integrated ESD protection | Integrated ESD protection |
| Operating Temperature Range | -40C to +85C | -40C to +85C | 0C to +70C | 0C to +70C | 0C to +70C |
| A-Grade Features | Standard MAX232E performance | Standard MAX232E performance | Standard MAX232C performance | MAX232A performance | MAX232A performance |
| Mounting Style | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
Diferenciadores clave
- Wider operating-temperature range than the commercial MAX232C alternative (frente a MAX232CPE)
- Standard E-grade performance rather than A-grade changes (frente a MAX232AAPE)
- Integrated two-channel RS-232 interface in a single 16-pin package (frente a MC1488NE4)
- Pin-compatible 16-PDIP construction for through-hole reuse (frente a MAX232EPE)
Notas de diseño
Place the manufacturer-recommended charge-pump capacitors and the device bypass capacitor close to their designated pins. Keep the RS-232 driver outputs and receiver inputs away from switching nodes and high-current return paths because parasitic coupling can appear as receiver errors. Route the interface ground as a signal reference rather than combining it indiscriminately with noisy chassis or power-return current. Confirm the footprint against the 16-pin plastic DIP drawing before committing the PCB.
Do not treat a 5 V UART signal as an RS-232 line. The MAX232ECNG4 converts logic-level UART signals to the bipolar RS-232 interface levels, and the UART voltage levels are not interchangeable with those line levels. Verify baud rate, data format, handshake direction, signal-ground reference, connector pin assignment, and behavior during reset or cable disconnection. Also compare the complete operating-temperature grade before substituting MAX232CPE for an extended-temperature installation.
Treat each RS-232 cable as a potential noise and electrostatic-discharge source. Keep the connector, protection network, transceiver pins, and ground reference grouped together, while separating them from switching regulators and high-current outputs. Use the manufacturer specifications for ESD protection and do not assume that the integrated protection eliminates the need for a sound enclosure, controlled ground reference, or suitable cable. Validate conducted and radiated emissions at the final product level.
Confirm the maximum supported data rate, receiver threshold, driver slew rate, and external capacitance before selecting a baud rate and cable length. Longer or slower RS-232 links generally require more conservative timing and grounding, while capacitance and poor signal references can cause transitions to become rounded or misinterpreted. Use oscilloscope measurements at the connector during startup and maximum traffic to verify that the installed cable and protection components do not degrade signal integrity.
Información de cumplimiento
Compliance status for the exact MAX232ECNG4 ordering code is not stated in the available product information. Verify RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation for the exact suffix before procurement.