Texas Instruments

MAX232ECNG4 - Dual RS-232 Transceiver | Texas Instruments

부품 번호: MAX232ECNG4 ✓ 활성
16-pin plastic dual in-line package Package
MOQ: 1 |

MAX232ECNG4 개요

The Texas Instruments MAX232ECNG4 is a dual RS-232 transceiver with one driver and one receiver per channel, integrated ESD protection, and a 16-pin plastic dual in-line package measuring 0.300 inch by 0.300 inch with a 7.62 mm body width. It is designed for systems that require bidirectional RS-232 conversion between modern digital logic and older serial interfaces.

An RS-232 transceiver is an interface IC that translates low-voltage CMOS or TTL-compatible logic levels to and from the higher-voltage bipolar signaling used by RS-232. A complete interface path commonly includes a transceiver for the main serial connection, a driver for additional lines, and a receiver for incoming data. The MAX232ECNG4 belongs to the RS-232 interface level within the broader semiconductor and interface IC hierarchy.

The principal feature of the MAX232ECNG4 is its integrated 2-transceiver arrangement. One channel can transmit while the other receives, allowing full-duplex communication with only two device channels. Integrated ESD protection is particularly useful at exposed connector pins, where static discharge from cables and connected equipment can damage a communications interface. The through-hole 16-pin package also supports conventional PCB assembly and connector-routing layouts.

This device is associated with the MAX232 product family from Maxim, which was acquired by Analog Devices and is now offered through Texas Instruments. The ECNG4 ordering code identifies the specific commercial-temperature, 16-pin plastic DIP configuration. Exact electrical ratings, driver and receiver thresholds, charge-pump performance, supply limits, and environmental classifications must be confirmed in the manufacturer datasheet before the circuit is released for production.

Typical uses include industrial control consoles, data-acquisition equipment, test systems, service interfaces, and embedded serial ports. The MAX232ECNG4 can also pair with dedicated RS-232 line drivers or receivers when a system requires more than two channels or an RS-485-to-RS-232 conversion stage. Connection to a modern host generally requires a logic-level UART, while the opposite side connects to an RS-232 connector and its external signal ground.

The principal design consideration is ensuring the transceiver operates with valid logic levels and supply voltage throughout startup, data transmission, and cable disconnection. Decoupling capacitors, cable routing, signal-ground handling, and ESD exposure all affect reliability. Confirm the required charge-pump capacitor values, driver slew behavior, receiver thresholds, and maximum data rate in the manufacturer datasheet before finalizing the layout.

This product record combines interface identification, package information, application guidance, comparison criteria, and practical design notes. It also distinguishes verified drop-in alternatives by package, temperature grade, and functional fit so engineers can narrow replacements without treating every similar RS-232 transceiver as an automatic substitution.

드롭인 대체품: MAX232ECNG4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: MAX232ECNG4 (동일 폼 팩터 및 풋프린트) — 차이점: Package, RoHS Status, Supply Voltage, Data Rate, ESD Protection.

Maxim Integrated
Package: 16-pin PDIP
RoHS Status: unknown
Supply Voltage: +5 V
비교 대상: MAX232ECNG4 →
Maxim Integrated
Package: 16-pin PDIP (PE)
RoHS Status: See compliance_info
Supply Voltage: 4.5 V to 5.5 V (single 5 V supply)
비교 대상: MAX232ECNG4 →
Maxim Integrated
Package: 16-PDIP (Plastic DIP, 0.300 inch / 7.62 mm)
RoHS Status: Compliant (lead-free + indicates lead-free finish)
Supply Voltage: 4.5 V to 5.5 V (single +5V supply)
비교 대상: MAX232ECNG4 →

MAX232EPE

✅ 드롭인 ⚠️ 사양 미검증
Maxim Integrated
📦 16-PDIP (0.300 in, 7.62 mm)
RS-232 Transceiver (Driver/Receiver) · 2 / 2 · 4.5 V to 5.5 V (single +5V supply) · 120 kbps (typical) · ±10 V (typical, generated internally by charge pump) · -40 C to +85 C (extended industrial) · 16-PDIP (Plastic DIP, 0.300 inch / 7.62 mm) · Through-Hole

가격 문의

데이터시트 보기 →

MAX232CPE

✅ 드롭인 ⚠️ 사양 미검증
Maxim Integrated
📦 16-PDIP (0.300 in, 7.62 mm)
RS-232 Transceiver (2 Drivers / 2 Receivers) · EIA/TIA-232E, V.28/V.24 · 4.5 V to 5.5 V (single 5 V supply) · 120 kbps · 2 · 2 · ±9 V typical (RS-232 load) · ±25 V

가격 문의

데이터시트 보기 →

MAX232ACPE+

✅ 드롭인 ⚠️ 사양 미검증
Maxim Integrated
📦 16-PDIP (0.300 in, 7.62 mm)
RS-232 transceiver · 2 · 2 · +5 V · EIA/TIA-232E and V.28/V.24 · 16-pin PDIP · Through-hole · Maxim Integrated

가격 문의

데이터시트 보기 →

MAX232AAPE

✅ 드롭인 ⚠️ 사양 미검증
📦 16-PDIP (0.300 in, 7.62 mm)
Same 16-PDIP footprint and dual RS-232 function; MAX232AAPE is an A-grade commercial-temperature member with a 0C lower limit, 70C upper limit, and grade-specific electrical characteristics.

📋 참조 대체품 (카탈로그에 없음)

MAX232ECNG4 사양

Transceiver Configuration 2 transmit and 2 receive channels
인터페이스 유형 RS-232
Driver and Receiver Count 2 drivers and 2 receivers
ESD Protection Integrated ESD protection
Package Type 16-pin plastic dual in-line package
Package Length 0.300 in
Package Body Width 7.62 mm
Package Pitch 7.62 mm
장착 스타일 Through-hole

MAX232ECNG4 7.62 mm 핀 구성 가이드

MAX232ECNG4(7.62 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

MAX232ECNG4의 7.62 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MAX232ECNG4.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MAX232ECNG4 적합 용도: 6 애플리케이션s: Industrial Control Console, Data-Acquisition Equipment, Embedded Service Interface, Test and Measurement Instrument, RS-232 Port Expansion, Legacy Equipment Communication.

🏭

Industrial Control Console

The MAX232ECNG4 is appropriate for a control console that exchanges commands and status data with an RS-232 service port. Its two transceiver channels allow a full-duplex connection between the controller logic and an external RS-232 connector, while integrated ESD protection helps protect connector-facing pins from cable-borne static discharge. The 16-PDIP package supports through-hole assembly and conventional routing between the controller and interface connector. Before release, verify the exact supply voltage, temperature grade, charge-pump capacitor values, and driver and receiver thresholds in the manufacturer datasheet, then include protection appropriate to the field-cable environment.

🖥️

Data-Acquisition Equipment

The MAX232ECNG4 can bridge a modern controller or test engine to an RS-232 acquisition unit when the design requires one receive and one transmit path. Its dual-driver and dual-receiver arrangement supports two full-duplex channels, and integrated ESD protection is useful when the serial line reaches a user-accessible connector. The 16-PDIP format provides a straightforward through-hole layout with a 7.62 mm row spacing. Confirm the MAX232ECNG4 maximum data rate, input thresholds, output slew behavior, supply range, and capacitor requirements in the datasheet before selecting cable length and baud rate.

🔧

Embedded Service Interface

The MAX232ECNG4 fits an embedded service port used for configuration, diagnostics, or firmware retrieval when an RS-232 physical interface is required. The transceiver converts logic-level UART signals to RS-232 levels, while its integrated ESD protection helps manage static discharge at an external connector. Its two channels can provide transmit and receive functions for a full-duplex link without requiring separate line-driver and receiver packages. The designer should verify signal-ground isolation, cable routing, supply-noise behavior, and the device's exact operating-temperature limits before deploying the interface into temperature-controlled or exposed equipment.

📟

Test and Measurement Instrument

The MAX232ECNG4 can provide the RS-232 communication path in a bench instrument or programmable test fixture. Two integrated transceiver channels support full-duplex operation, and integrated ESD protection is beneficial when users attach external leads to the instrument. The 16-PDIP package is practical for fixture construction and through-hole prototypes because it provides generous spacing between pins. Before choosing the baud rate and cable length, consult the manufacturer datasheet for the maximum data rate, receiver thresholds, driver slew rate, supply requirements, and recommended charge-pump capacitance.

🌐

RS-232 Port Expansion

The MAX232ECNG4 can expand a host with limited serial capability when two additional RS-232 channels are required. Its integrated transmitters and receivers reduce the number of discrete interface components needed for a full-duplex port, and the through-hole 16-PDIP package simplifies assembly where a small logic footprint is not essential. The design must still include the manufacturer's specified charge-pump capacitors, proper bypass capacitance, and correct signal-ground connection. Verify that all software-controlled line states remain valid at startup and during cable disconnection.

🖨️

Legacy Equipment Communication

The MAX232ECNG4 is useful when a modern controller must communicate with older RS-232 equipment through a physical serial port. Its 2/2 transceiver arrangement supports bidirectional data transfer, while the integrated ESD protection helps limit interface damage from electrostatic discharge on connected cables. The 16-PDIP package allows direct PCB replacement of a conventional through-hole interface circuit and is well suited to equipment designed around axial or through-hole components. Check the legacy device's logic polarity, baud rate, handshake requirements, connector pinout, and signal-ground reference before enabling communication.

What is the MAX232ECNG4?
The MAX232ECNG4 is a Texas Instruments 16-pin RS-232 transceiver containing two driver and two receiver channels with integrated ESD protection. According to the Texas Instruments MAX232 datasheet, it converts between logic-level serial signals and RS-232 line levels for bidirectional communications. The device is packaged in a through-hole 16-PDIP measuring 0.300 inch long and 7.62 mm wide, making it suitable for conventional PCB layouts that accept a standard 16-pin dual in-line footprint.
How many RS-232 channels does MAX232ECNG4 provide?
The MAX232ECNG4 provides two full RS-232 channels, with one transmitter and one receiver in each channel. According to the Texas Instruments MAX232 datasheet, the device can therefore support one full-duplex RS-232 link when the transmit and receive functions of a channel are connected to the same interface. For designs requiring more lines, the MAX232 family can be supplemented with additional RS-232 drivers or receivers rather than changing the host UART architecture.
Where can I download the MAX232ECNG4 datasheet PDF?
The MAX232ECNG4 datasheet PDF is available from the official Texas Instruments product page for the MAX232 family. According to the manufacturer, the document contains the recommended operating conditions, electrical characteristics, RS-232 driver and receiver thresholds, charge-pump circuit, ESD information, and package drawings. Use the manufacturer ordering information to confirm that MAX232ECNG4 denotes the 16-pin plastic DIP configuration before applying values to a finished design.
Where can I find the MAX232ECNG4 pinout?
The MAX232ECNG4 pinout is found in the pin-description and package-drawing sections of the Texas Instruments MAX232 datasheet. The exact MPN uses a 16-pin plastic dual in-line package, so its physical connection sequence follows the family documentation rather than a smaller surface-mount pinout. Assign PCB nets from the manufacturer pin table and verify the DIP orientation against the package drawing, especially for supply, ground, driver outputs, and receiver inputs.
What supply voltage does MAX232ECNG4 require?
The MAX232ECNG4 requires a single supply within the range specified by the Texas Instruments MAX232 datasheet. The family commonly uses a 5 V supply, but the exact allowable input-voltage limits and device-specific operating conditions must be checked before design release. The charge-pump capacitors connected to the designated pins must also match the manufacturer recommendation because their values establish the internal RS-232 voltage levels.
Is MAX232ECNG4 suitable for an industrial serial interface?
The MAX232ECNG4 can suit an industrial serial interface when its temperature range, ESD capability, and electrical limits satisfy the installation requirements. Its 2-transceiver arrangement supports bidirectional RS-232 communication, while integrated ESD protection helps protect connector-facing circuitry. According to the manufacturer datasheet, confirm the exact operating-temperature grade and isolation strategy for the enclosure, cable length, ground potential, and connected equipment.
What is the best drop-in replacement for MAX232ECNG4?
The closest drop-in alternatives are the 16-PDIP MAX232 family members MAX232EPE, MAX232CPE, MAX232ACPE, and MAX232AAPE, subject to temperature-grade and ordering-code verification. Each preserves the 16-pin through-hole transceiver footprint, but the operating-temperature ranges differ. According to the family documentation, MAX232CPE is the commercial-temperature option, while the MAX232EPE extends operation toward the wider industrial range; the A-grade members should be checked for their specified electrical distinctions.
Can MAX232CPE replace MAX232ECNG4?
MAX232CPE can serve as a pin-compatible replacement when the MAX232ECNG4 is not operating beyond the commercial-temperature limits of MAX232CPE. The MAX232CPE is the commercial-temperature 16-PDIP member, whereas MAX232ECNG4 is associated with the extended-temperature MAX232E ordering family. Before substitution, compare the complete datasheet tables for temperature, supply limits, electrical thresholds, ESD ratings, and obsolete or lifecycle status.
Is MAX232EPE the same as MAX232ECNG4?
MAX232EPE and MAX232ECNG4 are related MAX232 16-PDIP devices, but their complete ordering codes and manufacturer specifications must be treated separately. The MAX232EPE represents the older MAX232E package designation, while MAX232ECNG4 identifies the ECN G4 commercial-temperature configuration offered in the 16-pin plastic DIP. Their shared footprint makes substitution technically plausible, but procurement and lifecycle status should be confirmed for the exact suffix.
What can replace MAX232ECNG4 in an RS-232 design?
A replacement should use the same 16-PDIP footprint, provide two RS-232 channels, and match the required temperature and electrical performance. MAX232EPE, MAX232CPE, MAX232ACPE, and MAX232AAPE are same-family candidates, but their temperature grades and A-grade features differ. According to the manufacturer datasheets, compare pin functions, driver slew rate, receiver thresholds, supply range, ESD rating, and lifecycle status before treating any candidate as a drop-in replacement.
When should I choose MAX232ECNG4 over MAX232CPE?
Choose MAX232ECNG4 when the design requires the MAX232E family temperature range or a current manufacturer ordering code, while choosing MAX232CPE can be appropriate when all operating conditions remain inside the commercial-temperature range. Both use the same 16-PDIP format and provide two full RS-232 channels. The decision should follow an exact comparison of temperature grade, electrical characteristics, qualification requirements, and current availability rather than package similarity alone.
When should I choose MAX232ECNG4 over a separate RS-232 driver and receiver?
Choose MAX232ECNG4 when the design needs only two bidirectional RS-232 channels and benefits from integrating the driver, receiver, and ESD protection into one 16-pin device. Separate driver and receiver ICs can provide greater channel-count flexibility and may be easier to optimize for asymmetric links, but they require more components and board area. The MAX232ECNG4 is most attractive when simplicity, compact through-hole integration, and standard RS-232 levels are the main priorities.
Is MAX232ECNG4 suitable for RS-485 designs?
The MAX232ECNG4 is not an RS-485 transceiver because it is specified for RS-232 line signaling. It can be used only when the system specifically requires RS-232 levels. An RS-485 interface normally needs a different transceiver capable of differential driver outputs, receiver behavior, and bus-direction control. Do not substitute the MAX232ECNG4 into an RS-485 network without a suitable protocol and level-conversion circuit.
What are the key specifications of MAX232ECNG4 that engineers should know?
The MAX232ECNG4 is a 16-PDIP RS-232 interface IC with two driver and two receiver channels and integrated ESD protection. Its package is 0.300 inch long with a 7.62 mm body width and 7.62 mm pitch. According to the Texas Instruments MAX232 datasheet, the design must also account for the specified supply voltage, temperature range, charge-pump capacitors, data rate, RS-232 thresholds, and ESD withstand ratings.
Where can I buy MAX232ECNG4 and check its current lead time?
Use the Request a Quote form on this page to ask about MAX232ECNG4 availability, order quantity, and current lead time. The manufacturer ordering code is MAX232ECNG4, a 16-pin plastic DIP RS-232 transceiver from the MAX232 family. Before placing an order, confirm the temperature grade, package suffix, lifecycle status, and any customer-specific assembly or inspection requirements with the supplier.
What is the lead time for MAX232ECNG4?
The current lead time for MAX232ECNG4 should be requested through the Request a Quote form on this page because lead time can change with inventory and order quantity. Include the required package quantity, date code needs, traceability requirements, and target delivery date. Confirm that the quoted suffix is exactly MAX232ECNG4, since related MAX232 family members can have different temperature ranges, packaging codes, and production status.

엔지니어링 참조 데이터: MAX232ECNG4 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose MAX232ECNG4 for a through-hole RS-232 interface that needs two full-duplex channels, integrated ESD protection, and operation from -40C to +85C. Its 16-PDIP package is especially convenient for industrial controls, legacy equipment, data-acquisition units, and test instruments designed with conventional through-hole components. MAX232EPE is a closely related same-family part with the same footprint, but confirm its ordering details and production status before substitution. MAX232CPE, MAX232ACPE, and MAX232AAPE are sensible commercial-temperature options only when their 0C-to-70C range, A-grade characteristics, and exact electrical specifications fit the design. If two channels are insufficient, use a dedicated RS-232 driver or receiver such as MC1489NG4 or MC1488NE4. Always compare the complete manufacturer electrical tables rather than choosing solely by package, because data rate, thresholds, slew behavior, ESD ratings, and temperature limits determine final interchangeability.

대체품과의 비교

파라미터 이 제품 MAX232EPE MAX232CPE MAX232ACPE MAX232AAPE
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-PDIP (0.300 in, 7.62 mm) 16-PDIP (0.300 in, 7.62 mm) 16-PDIP (0.300 in, 7.62 mm) 16-PDIP (0.300 in, 7.62 mm) 16-PDIP (0.300 in, 7.62 mm)
Transceiver Configuration 2 transmit and 2 receive channels 2 transmit and 2 receive channels 2 transmit and 2 receive channels 2 transmit and 2 receive channels 2 transmit and 2 receive channels
Interface Type RS-232 RS-232 RS-232 RS-232 RS-232
ESD Protection Integrated ESD protection Integrated ESD protection Integrated ESD protection Integrated ESD protection Integrated ESD protection
Operating Temperature Range -40C to +85C -40C to +85C 0C to +70C 0C to +70C 0C to +70C
A-Grade Features Standard MAX232E performance Standard MAX232E performance Standard MAX232C performance MAX232A performance MAX232A performance
Mounting Style Through-hole Through-hole Through-hole Through-hole Through-hole

주요 차별점

  • Wider operating-temperature range than the commercial MAX232C alternative (vs MAX232CPE)
  • Standard E-grade performance rather than A-grade changes (vs MAX232AAPE)
  • Integrated two-channel RS-232 interface in a single 16-pin package (vs MC1488NE4)
  • Pin-compatible 16-PDIP construction for through-hole reuse (vs MAX232EPE)

설계 노트

Place the manufacturer-recommended charge-pump capacitors and the device bypass capacitor close to their designated pins. Keep the RS-232 driver outputs and receiver inputs away from switching nodes and high-current return paths because parasitic coupling can appear as receiver errors. Route the interface ground as a signal reference rather than combining it indiscriminately with noisy chassis or power-return current. Confirm the footprint against the 16-pin plastic DIP drawing before committing the PCB.

Do not treat a 5 V UART signal as an RS-232 line. The MAX232ECNG4 converts logic-level UART signals to the bipolar RS-232 interface levels, and the UART voltage levels are not interchangeable with those line levels. Verify baud rate, data format, handshake direction, signal-ground reference, connector pin assignment, and behavior during reset or cable disconnection. Also compare the complete operating-temperature grade before substituting MAX232CPE for an extended-temperature installation.

Treat each RS-232 cable as a potential noise and electrostatic-discharge source. Keep the connector, protection network, transceiver pins, and ground reference grouped together, while separating them from switching regulators and high-current outputs. Use the manufacturer specifications for ESD protection and do not assume that the integrated protection eliminates the need for a sound enclosure, controlled ground reference, or suitable cable. Validate conducted and radiated emissions at the final product level.

Confirm the maximum supported data rate, receiver threshold, driver slew rate, and external capacitance before selecting a baud rate and cable length. Longer or slower RS-232 links generally require more conservative timing and grounding, while capacitance and poor signal references can cause transitions to become rounded or misinterpreted. Use oscilloscope measurements at the connector during startup and maximum traffic to verify that the installed cable and protection components do not degrade signal integrity.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance status for the exact MAX232ECNG4 ordering code is not stated in the available product information. Verify RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation for the exact suffix before procurement.

관련 검색

MAX232ECNG4 datasheet MAX232ECNG4 pinout MAX232ECNG4 datasheet pdf MAX232ECNG4 equivalent MAX232ECNG4 replacement MAX232ECNG4 cross reference MAX232ECNG4 vs MAX232EPE MAX232ECNG4 footprint Texas Instruments MAX232ECNG4 MAX232ECNG4 price MAX232ECNG4 stock MAX232 16-PDIP pinout MAX232 RS-232 application circuit what is MAX232ECNG4

관련 부품 & 용어

Texas Instruments MAX232ECNG4 MAX232EPE MAX232CPE MAX232ACPE MAX232AAPE MAX232 RS-232 transceiver RS-232 interface IC line driver line receiver full-duplex communication integrated ESD protection charge-pump capacitor 16-PDIP plastic dual in-line package through-hole package CMOS logic TTL-compatible logic serial UART 7.62 mm 0.300 inch industrial control data acquisition
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기