MAX3221EEAE+G071 - 250kbps RS-232 Transceiver | Maxim
N.º de pieza: MAX3221EEAE+G071 ✓ ActivoMAX3221EEAE+G071 Descripción general
An RS-232 transceiver is an interface IC that translates logic-level signals between a computer or embedded controller and a RS-232 communications link. The driver converts a low-voltage digital signal into RS-232 levels, while the receiver converts an incoming RS-232 signal into a logic-compatible signal. In the electronics hierarchy, the MAX3221EEAE+G071 belongs to the interface IC class and specifically implements an EIA/TIA-232 communications interface with automatic shutdown and wake-up behavior.
The 3.0V to 5.5V supply range allows operation from regulated 3.3V and 5V systems. Its 250kbps maximum data rate supports legacy serial links used in point-to-point equipment, industrial controllers, data-acquisition systems, and service interfaces. Automatic shutdown reduces supply current to 1uA when no valid receiver signal is detected, helping conserve power in systems that spend substantial time idle. The integrated ±15kV ESD protection strengthens the external serial interface against electrostatic discharge events.
The MAX3221EEAE+G071 uses Maxim Integrated's charge-pump interface architecture to generate the bipolar voltage levels required by RS-232 from a single low-voltage supply. One transmitter and one receiver make it suitable for designs requiring a single serial data path rather than multiple RS-232 channels. Automatic wake-up allows the device to return to operating mode after a valid signal appears, reducing the need for external power-management logic around the serial port.
Typical applications include industrial control equipment, instrumentation, data-logging systems, configuration ports, service and debug interfaces, and embedded serial adapters. It is particularly useful where low standby consumption is important and where the host operates from either 3.3V or 5V power. The 16-SSOP package also supports compact board layouts where a larger SOIC or dual-channel transceiver would be unnecessary.
When laying out a board, place the charge-pump capacitors and the RS-232 interface components directly beside the IC according to the manufacturer's pin-description and typical-application diagrams. Route the exposed RS-232 connector pins away from sensitive low-level circuitry, and provide the specified power and ground-plane connections to minimize return-path disturbance.
This product page combines interface specifications, package details, application guidance, and a parameter-focused comparison with compatible RS-232 transceiver options. It also identifies design considerations for power management, ESD protection, signal routing, and component replacement so engineers can evaluate the device before integrating it into a new board.
Alternativas directas para MAX3221EEAE+G071 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MAX3221EEAE+G071 (mismo factor de forma y huella) — difiere en ESD Protection, Maximum Data Rate, Package, Product Type, Supply Voltage Range.
MAX3221IDB
✅ Sustitución directaConsulte el precio
Ver hoja de datos →SN65C3221EDB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
SN65C3221DB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MAX3221EEAE+G071 Especificaciones
| Product Type | Single-channel RS-232 transceiver IC |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 250kbps |
| Shutdown Supply Current | 1uA |
| ESD Protection | ±15kV |
| Transmitter Count | 1 driver |
| Receiver Count | 1 receiver |
| Automatic Shutdown | Supported |
| Automatic Wake-Up | Supported |
| Encapsulado | 16-SSOP |
| Tipo de montaje | Surface mount |
| Moisture Sensitivity Level | MSL 1 |
| Peak Reflow Temperature | 260C |
| Peak Reflow Time | 30s maximum |
| Terminal Finish | Matte tin |
| JESD-609 Code | e3 |
| Número de pines | 16 pins |
Guía de configuración de pines de MAX3221EEAE+G071 16-ssop
Configuración de pines para MAX3221EEAE+G071 (encapsulado 16-ssop). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para MAX3221EEAE+G071.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MAX3221EEAE+G071 es adecuado para 6 aplicacións: Industrial Controller Serial Port, Data-Acquisition Equipment, Instrument Service and Configuration Port, Legacy Serial Adapter, Low-Power Embedded System, Point-to-Point Communications Equipment.
Industrial Controller Serial Port
The MAX3221EEAE+G071 fits a point-to-point industrial controller that must communicate with a service computer, programming fixture, or external automation device. Its single RS-232 driver and receiver are sufficient for one serial channel, while operation from 3.0V to 5.5V supports both 3.3V and 5V controller platforms. The 250kbps capability covers standard legacy serial traffic, and automatic shutdown can reduce the idle current to 1uA when the remote device is disconnected. Place the interface close to the connector and follow the manufacturer’s charge-pump capacitor layout to minimize switching disturbance on controller circuitry.
Recomendado
Data-Acquisition Equipment
A data-acquisition unit can use the MAX3221EEAE+G071 to connect a controller to a host computer over an RS-232 command or configuration link. The transceiver converts between digital logic levels and RS-232 line levels, and its one-driver, one-receiver arrangement matches a single full-duplex communications path. Operation across 3.0V to 5.5V simplifies compatibility with mixed legacy and modern control hardware. At rates up to 250kbps, it is appropriate for command exchange and periodic measurement transfer. The 1uA shutdown state also helps limit standby consumption when the acquisition unit is inactive.
Recomendado
Instrument Service and Configuration Port
The MAX3221EEAE+G071 is suitable for the service connector of laboratory or test instruments that use a computer for calibration, status retrieval, or firmware configuration. Its ±15kV ESD protection helps protect the interface when the cable is connected or disconnected in a typical industrial environment. The 16-SSOP package permits a compact implementation, and the 3.0V to 5.5V operating range supports both 3.3V and 5V instrument architectures. Automatic wake-up allows the interface to become operational when a valid remote signal is detected, reducing the burden on the host controller.
Recomendado
Legacy Serial Adapter
A compact legacy serial adapter can be built around the MAX3221EEAE+G071 when a modern USB host or embedded system needs an RS-232 port. The interface needs one transmit path and one receive path, which the single-driver, single-receiver device provides. Its 250kbps maximum data rate supports conventional serial adapters, diagnostics links, and equipment configuration channels. The 16-SSOP footprint helps control board area, while the 3.3V compatibility permits operation from modern digital rails. Use the manufacturer’s recommended interface components and keep the cable-side protection and ground routing physically separated from sensitive logic.
Recomendado
Low-Power Embedded System
The MAX3221EEAE+G071 is useful in an embedded system that occasionally connects to an RS-232 service tool. Its 1uA shutdown current reduces standby consumption when no valid receiver activity is present, while automatic wake-up supports reconnection without continuous enable-control circuitry. The device operates from 3.0V to 5.5V, allowing it to share common embedded supply rails. One transmitter and one receiver are sufficient for a basic diagnostic channel at rates up to 250kbps. Designers should still verify startup timing and capacitor selection in the final power sequence so the interface remains inactive until the embedded system is ready.
Recomendado
Point-to-Point Communications Equipment
The MAX3221EEAE+G071 can serve as the RS-232 interface in point-to-point equipment that exchanges commands between two systems over a dedicated cable. A single driver and receiver provide the required communication paths without adding a dual-channel transceiver, while the 3.0V to 5.5V range supports common supply voltages. The 250kbps rating provides useful margin for many legacy protocols, and ±15kV ESD protection improves robustness at the external line interface. Correct charge-pump capacitor placement and careful routing of the RS-232 pins are essential for dependable operation in a compact multilayer board.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MAX3221EEAE+G071 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MAX3221IDB | SN65C3221EDB | SN65C3221DB |
|---|---|---|---|---|
| Brand | Maxim Integrated | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP |
| Transmitter and Receiver Count | 1 driver and 1 receiver | 1 driver and 1 receiver | 1 driver and 1 receiver | 1 driver and 1 receiver |
| ESD Protection | ±15kV | ±15kV | ±15kV | ±15kV |
| Interface Standard | EIA/TIA-232 and V.28/V.24 | EIA/TIA-232 and V.28/V.24 | RS-232 | RS-232 |
Diferenciadores clave
- Single-channel interface in a compact 16-SSOP package (frente a MAX3232ECAE+T)
- Automatic shutdown with 1uA current (frente a SN65C3221EDB)
- 250kbps operation over a 3.0V to 5.5V range (frente a MAX3221IDB)
Notas de diseño
Place the charge-pump capacitors and all interface components directly beside their associated MAX3221EEAE+G071 pins. Keep the RS-232 route short and physically separated from clocks, sensor inputs, analog traces, and other sensitive nets. A compact placement reduces the area in which charge-pump currents can couple into unrelated circuitry and supports stable operation with the manufacturer’s recommended component values.
Design the 3.0V to 5.5V supply rail so the transceiver remains within its specified operating range during startup, shutdown, and line activity. Use local supply decoupling at the IC and follow the datasheet’s capacitor guidance. Automatic shutdown reduces current to 1uA when no valid receiver signal is present, but it does not remove the need for a properly sequenced and decoupled supply rail.
Do not select a substitute solely because it is labeled RS-232 or uses a 16-SSOP package. Verify the numbered pin functions, supply limits, charge-pump capacitor values, shutdown polarity, wake-up behavior, and ESD rating. MAX3221IDB, SN65C3221EDB, and SN65C3221DB are candidates for engineering review, but each requires a complete manufacturer-data review before a production substitution.
Provide a low-impedance ground reference for the interface and route the cable-side return path without long loops through the board. Keep protection components close to the external connector, and maintain separation between the RS-232 pins and sensitive logic. This arrangement limits ground-potential effects and reduces the chance that electrostatic-discharge current or cable transients will disturb surrounding circuitry.
Información de cumplimiento
The package documentation identifies MSL 1, a 260C peak reflow temperature for 30 seconds, matte-tin terminal finish, and JESD-609 code e3. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer documentation.