Maxim Integrated

MAX3221EEAE+G071 - 250kbps RS-232 Transceiver | Maxim

Référence : MAX3221EEAE+G071 ✓ Actif
3.0V to 5.5V Vdss 1uA Id 16-SSOP Package
MOQ : 1 |

MAX3221EEAE+G071 Présentation

Maxim Integrated MAX3221EEAE+G071 is a single-channel RS-232 transceiver IC with 3.0V to 5.5V operation, a maximum data rate of 250kbps, 1uA shutdown current, and ±15kV ESD protection. The device contains one line driver and one line receiver and is packaged in a 16-SSOP package.

An RS-232 transceiver is an interface IC that translates logic-level signals between a computer or embedded controller and a RS-232 communications link. The driver converts a low-voltage digital signal into RS-232 levels, while the receiver converts an incoming RS-232 signal into a logic-compatible signal. In the electronics hierarchy, the MAX3221EEAE+G071 belongs to the interface IC class and specifically implements an EIA/TIA-232 communications interface with automatic shutdown and wake-up behavior.

The 3.0V to 5.5V supply range allows operation from regulated 3.3V and 5V systems. Its 250kbps maximum data rate supports legacy serial links used in point-to-point equipment, industrial controllers, data-acquisition systems, and service interfaces. Automatic shutdown reduces supply current to 1uA when no valid receiver signal is detected, helping conserve power in systems that spend substantial time idle. The integrated ±15kV ESD protection strengthens the external serial interface against electrostatic discharge events.

The MAX3221EEAE+G071 uses Maxim Integrated's charge-pump interface architecture to generate the bipolar voltage levels required by RS-232 from a single low-voltage supply. One transmitter and one receiver make it suitable for designs requiring a single serial data path rather than multiple RS-232 channels. Automatic wake-up allows the device to return to operating mode after a valid signal appears, reducing the need for external power-management logic around the serial port.

Typical applications include industrial control equipment, instrumentation, data-logging systems, configuration ports, service and debug interfaces, and embedded serial adapters. It is particularly useful where low standby consumption is important and where the host operates from either 3.3V or 5V power. The 16-SSOP package also supports compact board layouts where a larger SOIC or dual-channel transceiver would be unnecessary.

When laying out a board, place the charge-pump capacitors and the RS-232 interface components directly beside the IC according to the manufacturer's pin-description and typical-application diagrams. Route the exposed RS-232 connector pins away from sensitive low-level circuitry, and provide the specified power and ground-plane connections to minimize return-path disturbance.

This product page combines interface specifications, package details, application guidance, and a parameter-focused comparison with compatible RS-232 transceiver options. It also identifies design considerations for power management, ESD protection, signal routing, and component replacement so engineers can evaluate the device before integrating it into a new board.

Alternatives de remplacement direct pour MAX3221EEAE+G071 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MAX3221EEAE+G071 (même facteur de forme et même empreinte) — différant par ESD Protection, Maximum Data Rate, Package, Product Type, Supply Voltage Range.

Texas Instruments
ESD Protection: ±15 kV pin to pin
Maximum Data Rate: 250 kbps
Package: 16-pin SSOP
Comparer avec MAX3221EEAE+G071 →

MAX3221IDB

✅ Remplacement direct
Texas Instruments
📦 16-SSOP
Single-channel RS-232 line driver/receiver · 3 V to 5.5 V · 250 kbps · ±15 kV pin to pin · 1 driver · 1 receiver · Dedicated enable pin · Dual charge-pump circuit

Contactez-nous pour le prix

Voir la fiche technique →

SN65C3221EDB

✅ Remplacement direct
📦 16-SSOP
Same 16-SSOP and same 1-driver, 1-receiver count with matching ±15kV ESD protection; interface-count difference is 0, while supply and timing values require final comparison

📋 Alternative de référence (hors catalogue)

SN65C3221DB

✅ Remplacement direct
📦 16-SSOP
Same 16-SSOP and same 1-driver, 1-receiver count; documented ESD-protection class matches at ±15kV, with 0% channel-count difference

📋 Alternative de référence (hors catalogue)

MAX3221EEAE+G071 Spécifications

Product Type Single-channel RS-232 transceiver IC
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 250kbps
Shutdown Supply Current 1uA
ESD Protection ±15kV
Transmitter Count 1 driver
Receiver Count 1 receiver
Automatic Shutdown Supported
Automatic Wake-Up Supported
Boîtier 16-SSOP
Type de montage Surface mount
Moisture Sensitivity Level MSL 1
Peak Reflow Temperature 260C
Peak Reflow Time 30s maximum
Terminal Finish Matte tin
JESD-609 Code e3
Nombre de broches 16 pins

Guide de configuration des broches du MAX3221EEAE+G071 16-ssop

Configuration des broches du MAX3221EEAE+G071 (boîtier 16-ssop). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 16-ssop pour le MAX3221EEAE+G071

Aucune donnée de brochage détaillée disponible pour MAX3221EEAE+G071.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MAX3221EEAE+G071 convient pour 6 applications: Industrial Controller Serial Port, Data-Acquisition Equipment, Instrument Service and Configuration Port, Legacy Serial Adapter, Low-Power Embedded System, Point-to-Point Communications Equipment.

🏭

Industrial Controller Serial Port

The MAX3221EEAE+G071 fits a point-to-point industrial controller that must communicate with a service computer, programming fixture, or external automation device. Its single RS-232 driver and receiver are sufficient for one serial channel, while operation from 3.0V to 5.5V supports both 3.3V and 5V controller platforms. The 250kbps capability covers standard legacy serial traffic, and automatic shutdown can reduce the idle current to 1uA when the remote device is disconnected. Place the interface close to the connector and follow the manufacturer’s charge-pump capacitor layout to minimize switching disturbance on controller circuitry.

📊

Data-Acquisition Equipment

A data-acquisition unit can use the MAX3221EEAE+G071 to connect a controller to a host computer over an RS-232 command or configuration link. The transceiver converts between digital logic levels and RS-232 line levels, and its one-driver, one-receiver arrangement matches a single full-duplex communications path. Operation across 3.0V to 5.5V simplifies compatibility with mixed legacy and modern control hardware. At rates up to 250kbps, it is appropriate for command exchange and periodic measurement transfer. The 1uA shutdown state also helps limit standby consumption when the acquisition unit is inactive.

🧪

Instrument Service and Configuration Port

The MAX3221EEAE+G071 is suitable for the service connector of laboratory or test instruments that use a computer for calibration, status retrieval, or firmware configuration. Its ±15kV ESD protection helps protect the interface when the cable is connected or disconnected in a typical industrial environment. The 16-SSOP package permits a compact implementation, and the 3.0V to 5.5V operating range supports both 3.3V and 5V instrument architectures. Automatic wake-up allows the interface to become operational when a valid remote signal is detected, reducing the burden on the host controller.

🔧

Legacy Serial Adapter

A compact legacy serial adapter can be built around the MAX3221EEAE+G071 when a modern USB host or embedded system needs an RS-232 port. The interface needs one transmit path and one receive path, which the single-driver, single-receiver device provides. Its 250kbps maximum data rate supports conventional serial adapters, diagnostics links, and equipment configuration channels. The 16-SSOP footprint helps control board area, while the 3.3V compatibility permits operation from modern digital rails. Use the manufacturer’s recommended interface components and keep the cable-side protection and ground routing physically separated from sensitive logic.

🧩

Low-Power Embedded System

The MAX3221EEAE+G071 is useful in an embedded system that occasionally connects to an RS-232 service tool. Its 1uA shutdown current reduces standby consumption when no valid receiver activity is present, while automatic wake-up supports reconnection without continuous enable-control circuitry. The device operates from 3.0V to 5.5V, allowing it to share common embedded supply rails. One transmitter and one receiver are sufficient for a basic diagnostic channel at rates up to 250kbps. Designers should still verify startup timing and capacitor selection in the final power sequence so the interface remains inactive until the embedded system is ready.

🌐

Point-to-Point Communications Equipment

The MAX3221EEAE+G071 can serve as the RS-232 interface in point-to-point equipment that exchanges commands between two systems over a dedicated cable. A single driver and receiver provide the required communication paths without adding a dual-channel transceiver, while the 3.0V to 5.5V range supports common supply voltages. The 250kbps rating provides useful margin for many legacy protocols, and ±15kV ESD protection improves robustness at the external line interface. Correct charge-pump capacitor placement and careful routing of the RS-232 pins are essential for dependable operation in a compact multilayer board.

Récapitulatif des produits recommandés

MAX3221IDB Texas Instruments Utilisé dans : Industrial Controller Serial Port, Data-Acquisition Equipment, Instrument Service and Configuration Port, Legacy Serial Adapter, Low-Power Embedded System, Point-to-Point Communications Equipment SN65C3221EDB Single-channel RS-232 interface option Utilisé dans : Industrial Controller Serial Port, Instrument Service and Configuration Port, Low-Power Embedded System SN65C3221DB Single-channel RS-232 interface option Utilisé dans : Data-Acquisition Equipment, Legacy Serial Adapter, Point-to-Point Communications Equipment
What are the key specifications of MAX3221EEAE+G071 that engineers should know?
The MAX3221EEAE+G071 is a 3.0V to 5.5V, single-channel RS-232 transceiver rated for 250kbps, with 1uA shutdown current and ±15kV ESD protection. It provides one line driver, one line receiver, automatic shutdown, and automatic wake-up in a 16-SSOP package. According to the Maxim Integrated product page, these devices are designed for EIA/TIA-232 and V.28/V.24 communications interfaces.
Where can I download the MAX3221EEAE+G071 datasheet PDF?
The MAX3221EEAE+G071 datasheet PDF is available from the linked manufacturer-data document for this part. The Maxim Integrated MAX3221E family documentation describes the 3.0V to 5.5V supply range, 250kbps operation, automatic shutdown and wake-up, and enhanced electrostatic-discharge protection. Use the PDF pin-description table and typical application circuit when assigning PCB connections.
Where can I find the MAX3221EEAE+G071 pinout?
The MAX3221EEAE+G071 pinout is defined in the manufacturer datasheet for its 16-SSOP package. Assign signals using the numbered pin-description table rather than relying only on the functional block diagram, especially for the charge-pump capacitor pins and RS-232 line pins. The package is a 16-lead surface-mount SSOP, so the physical footprint and pin-1 orientation must match the board layout.
What can replace MAX3221EEAE+G071?
The closest documented drop-in options are MAX3221IDB, SN65C3221EDB, and SN65C3221DB because each is associated with the same 16-SSOP single-driver, single-receiver RS-232 interface class and ±15kV ESD-protected operation. Confirm the complete pin-description table, shutdown polarity, wake-up timing, and capacitor requirements before substituting any part. Only three documented alternatives met the package and interface-count constraints.
Is MAX3221EEAE+G071 suitable for 3.3V systems?
Yes. The MAX3221EEAE+G071 operates from 3.0V to 5.5V, so it is suitable for regulated 3.3V systems as well as 5V systems. Its 250kbps maximum data rate supports the required legacy RS-232 link rate, while automatic shutdown limits standby consumption to 1uA. Confirm the surrounding charge-pump capacitors and line-interface components against the family datasheet.
How much power does MAX3221EEAE+G071 use when idle?
The MAX3221EEAE+G071 has a shutdown supply current of 1uA. Automatic shutdown is triggered when the receiver does not detect a valid signal, allowing the on-board power supply and drivers to enter a low-power state. This makes the device useful for battery-powered or intermittently connected equipment. The 1uA figure is the shutdown condition, not the active operating current.
What is the difference between MAX3221EEAE+G071 and MAX3221IDB?
MAX3221IDB is the closest documented same-footprint option, using a 16-SSOP package for the same single-driver, single-receiver RS-232 interface class. Both device families are described as 3V-powered interfaces with automatic shutdown and wake-up, 250kbps-class operation, and ±15kV ESD protection. Verify the exact MAX3221IDB ordering suffix and pin descriptions before treating it as a production drop-in replacement.
Is MAX3221EEAE+G071 the same as SN65C3221EDB?
No, although both are single-driver, single-receiver RS-232 interface devices associated with a 16-SSOP package and ±15kV ESD protection. They come from different manufacturers and may differ in shutdown behavior, electrical timing, charge-pump implementation, and recommended external components. Compare the manufacturer pin tables and operating specifications before substituting SN65C3221EDB for MAX3221EEAE+G071.
When should I choose MAX3221EEAE+G071 over MAX3221IDB?
Choose MAX3221EEAE+G071 when the design is tied to the Maxim Integrated MAX3221E family and its documented 3.0V to 5.5V, 250kbps, automatic-shutdown behavior. Choose MAX3221IDB when its ordering suffix, lifecycle status, electrical limits, and external-capacitor requirements are fully verified for the intended production build. Both are 16-SSOP single-channel options, so the decision should not rely on package appearance alone.
What is the best Texas Instruments equivalent for MAX3221EEAE+G071?
The best documented cross-brand candidates are SN65C3221EDB and SN65C3221DB, both associated with single-driver, single-receiver RS-232 interfaces in a 16-SSOP package. The SN65C3221 family includes a dual charge-pump circuit and ±15kV ESD protection. A production substitution still requires checking pin-level shutdown logic, timing, supply limits, and capacitor values against the target design.
Where to buy MAX3221EEAE+G071 online?
Use the Request a Quote form on this page to request MAX3221EEAE+G071 availability, lead time, order quantity, and commercial terms. The request can be submitted with the exact 16-SSOP ordering code MAX3221EEAE+G071, which helps avoid confusion with base or packaging variants. Current inventory and delivery scheduling should be confirmed through the quote response.
What is the price of MAX3221EEAE+G071?
Use the Request a Quote form on this page for the current price, quantity breaks, stock position, and lead time for MAX3221EEAE+G071. Quote-based handling keeps the commercial response aligned with the exact ordering suffix, package, quantity, and delivery requirements. No static price should be used for budgeting because distributor pricing and availability change with market conditions.
What is the lead time for MAX3221EEAE+G071?
The current lead time for MAX3221EEAE+G071 should be requested through the Request a Quote form on this page. Include the required quantity, production schedule, and shipment destination so the supplier can confirm allocation and delivery timing for the exact 16-SSOP part. Avoid substituting a related MAX3221EEAE ordering code unless its qualification and packaging requirements have been reviewed.
Is MAX3221EEAE+G071 in stock?
Confirm current stock for MAX3221EEAE+G071 through the Request a Quote form on this page. The response should cover the exact ordering code, requested quantity, pack orientation, and estimated dispatch timing. Because RS-232 transceiver inventory can vary by package and order quantity, a general availability statement for the broader MAX3221 family is not sufficient for production planning.
What RS-232 applications suit MAX3221EEAE+G071?
MAX3221EEAE+G071 fits point-to-point equipment that needs one RS-232 driver and one receiver at rates up to 250kbps. Typical uses include industrial controllers, data-acquisition units, instrument service ports, embedded configuration interfaces, and legacy serial adapters. The 1uA shutdown current is especially useful in intermittently powered equipment, while ±15kV ESD protection adds resilience at an external connector.

Données de référence d'ingénierie pour MAX3221EEAE+G071 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose MAX3221EEAE+G071 when the design needs a compact, single-channel RS-232 interface operating from a 3.3V or 5V rail, with automatic shutdown, automatic wake-up, 250kbps operation, and ±15kV ESD protection. Its one-driver, one-receiver configuration is appropriate for point-to-point service, configuration, and legacy communications links without adding unused channels. Consider MAX3221IDB when the production BOM is tied to the Texas Instruments MAX3221IDB device; the headline 3.0V-to-5.5V and 250kbps ratings align, but the exact pin functions and ordering suffix still require verification. SN65C3221EDB and SN65C3221DB are alternative 16-SSOP candidates worth reviewing for cross-brand sourcing, especially when their electrical timing, shutdown behavior, and external-capacitor requirements match the original circuit. Do not substitute a dual-channel transceiver unless the PCB pinout and unused-channel treatment are verified.

Comparaison avec les alternatives

Paramètre Ce produit MAX3221IDB SN65C3221EDB SN65C3221DB
Brand Maxim Integrated Texas Instruments Texas Instruments Texas Instruments
Package 16-SSOP 16-SSOP 16-SSOP 16-SSOP
Transmitter and Receiver Count 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver
ESD Protection ±15kV ±15kV ±15kV ±15kV
Interface Standard EIA/TIA-232 and V.28/V.24 EIA/TIA-232 and V.28/V.24 RS-232 RS-232

Principaux différenciateurs

  • Single-channel interface in a compact 16-SSOP package (vs MAX3232ECAE+T)
  • Automatic shutdown with 1uA current (vs SN65C3221EDB)
  • 250kbps operation over a 3.0V to 5.5V range (vs MAX3221IDB)

Notes de conception

Place the charge-pump capacitors and all interface components directly beside their associated MAX3221EEAE+G071 pins. Keep the RS-232 route short and physically separated from clocks, sensor inputs, analog traces, and other sensitive nets. A compact placement reduces the area in which charge-pump currents can couple into unrelated circuitry and supports stable operation with the manufacturer’s recommended component values.

Design the 3.0V to 5.5V supply rail so the transceiver remains within its specified operating range during startup, shutdown, and line activity. Use local supply decoupling at the IC and follow the datasheet’s capacitor guidance. Automatic shutdown reduces current to 1uA when no valid receiver signal is present, but it does not remove the need for a properly sequenced and decoupled supply rail.

Do not select a substitute solely because it is labeled RS-232 or uses a 16-SSOP package. Verify the numbered pin functions, supply limits, charge-pump capacitor values, shutdown polarity, wake-up behavior, and ESD rating. MAX3221IDB, SN65C3221EDB, and SN65C3221DB are candidates for engineering review, but each requires a complete manufacturer-data review before a production substitution.

Provide a low-impedance ground reference for the interface and route the cable-side return path without long loops through the board. Keep protection components close to the external connector, and maintain separation between the RS-232 pins and sensitive logic. This arrangement limits ground-potential effects and reduces the chance that electrostatic-discharge current or cable transients will disturb surrounding circuitry.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The package documentation identifies MSL 1, a 260C peak reflow temperature for 30 seconds, matte-tin terminal finish, and JESD-609 code e3. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from current manufacturer documentation.

Données vérifiées le : 2026-11-09 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MAX3221EEAE+G071 datasheet MAX3221EEAE+G071 datasheet pdf MAX3221EEAE+G071 pinout MAX3221EEAE+G071 equivalent MAX3221EEAE+G071 replacement MAX3221EEAE+G071 cross reference MAX3221EEAE+G071 vs MAX3221IDB MAX3221EEAE+G071 vs SN65C3221EDB MAX3221EEAE+G071 footprint MAX3221EEAE+G071 price MAX3221EEAE+G071 stock Maxim Integrated MAX3221EEAE+G071 MAX3221EEAE+G071 application circuit MAX3221EEAE+G071 RS-232 transceiver MAX3221EEAE+G071 16-SSOP pinout

Composants & termes associés

Maxim Integrated Analog Devices MAX3221EEAE+G071 MAX3221IDB SN65C3221EDB SN65C3221DB MAX3232ECAE+T RS-232 transceiver interface IC line driver line receiver EIA/TIA-232 V.28 V.24 charge-pump circuit automatic shutdown automatic wake-up ESD protection 250kbps data rate 3.0V to 5.5V supply 16-SSOP SSOP package family surface-mount device industrial control equipment data-acquisition equipment
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ