Texas Instruments

MAX3232CDG4 - 3V Dual RS-232 Transceiver | Texas Instruments

N.º de pieza: MAX3232CDG4 ✓ Activo
3 V to 5.5 V Vdss 16-SOIC, 3.90 mm width Package
MOQ: 1 |

MAX3232CDG4 Descripción general

Texas Instruments MAX3232CDG4 is a dual RS-232 line-driver and line-receiver transceiver with two drivers, two receivers, a 3 V to 5.5 V supply range, and operation up to 250 kbit/s in a 16-pin SOIC package. The device provides ±15 kV electrostatic-discharge protection and is designed for compatibility with TIA/EIA-232-F and ITU V.28 interfaces. Its integrated charge-pump circuitry creates the positive and negative voltage levels required by RS-232 from a single low-voltage supply.

An RS-232 transceiver is an interface IC that converts between digital logic-level signals and the bipolar voltage levels used by RS-232 equipment. This device sits between a UART, microcontroller, or other host controller and a serial connector. Within the semiconductor hierarchy, the MAX3232CDG4 is an interface IC, a line transceiver, and a dual charge-pump RS-232 transceiver designed for reliable point-to-point serial links.

Key features include two transmit channels, two receive channels, low-power operation, a maximum data rate of 250 kbit/s, and a single 3 V to 5.5 V supply. Four external 0.1 µF capacitors support the charge-pump and supply functions. The 16-SOIC package is suitable for conventional surface-mount PCB assembly, while the C-grade version is intended for commercial-temperature operation from 0 °C to 70 °C.

The MAX3232 family includes the MAX3232E, which Texas Instruments describes as an improved direct drop-in replacement for the original MAX3232. The E variant offers a useful upgrade path for new designs, but engineers must verify the complete pinout, electrical limits, capacitor requirements, and operating-temperature range of the exact orderable suffix before replacing a populated board.

Typical uses include industrial serial consoles, point-of-sale equipment, data-acquisition controllers, instrumentation, and legacy peripheral interfaces that use an RS-232 port but operate from a modern 3.3 V or 5 V logic supply. The transceiver is especially useful where a UART needs true RS-232 electrical levels rather than TTL-level signaling.

For layout, place the required charge-pump capacitors close to their associated pins and route the RS-232 driver outputs and receiver inputs away from sensitive clock, reset, and analog signals. Confirm that the host UART logic voltage matches the receiver threshold and driver interface requirements. A common mistake is treating RS-232 as a differential or ground-referenced logic standard; it uses a single-ended bipolar signal referenced to the common ground connection.

This product page combines manufacturer specifications, package details, lifecycle considerations, drop-in alternatives, and application-specific design guidance. It supports faster component selection while keeping the electrical and mechanical checks needed for a safe PCB substitution.

Alternativas directas para MAX3232CDG4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MAX3232CDG4 (mismo factor de forma y huella) — difiere en ESD Protection, Package.

Texas Instruments
ESD Protection: ±15 kV
Package: 16-pin SOIC
Comparar con MAX3232CDG4 →

MAX3232CDE4

✅ Sustitución directa
Texas Instruments
📦 16-SOIC
RS-232 line driver/receiver transceiver · 2/2 · Full duplex · 3 V to 5.5 V · 250 kbps · ±15 kV HBM · 0 °C to 70 °C · 16-SOIC, 0.154 in (3.90 mm) width

Consulte el precio

Ver hoja de datos →

MAX3232EIDWR

✅ Sustitución directa
📦 16-SOIC
Texas Instruments identifies MAX3232E as an improved direct drop-in replacement for MAX3232; the EIDWR suffix provides a 16-pin SOIC industrial-temperature option.

📋 Alternativa de referencia (no en el catálogo)

MAX3232ID

✅ Sustitución directa
Texas Instruments
📦 16-SOIC
2/2 RS-232 line driver and receiver · 3 V to 5.5 V · 250 kbit/s · 2 · 2 · ±15 kV · 300 µA · 5 V logic

Consulte el precio

Ver hoja de datos →

MAX3232ECDR

✅ Sustitución directa
Texas Instruments
📦 16-SOIC
Dual RS-232 line driver and receiver · 2 channels · 3 V to 5.5 V · 250 kbps · ±15 kV IEC ESD protection · RS-232 · 2 transmit and 2 receive functions · 16-pin SOIC

Consulte el precio

Ver hoja de datos →

MAX3232ECWE

✅ Sustitución directa
📦 16-SOIC
E-generation MAX3232 in a 16-pin SOIC package; exact temperature grade, lifecycle status, and device limits should be verified against the target requirements.

📋 Alternativa de referencia (no en el catálogo)

SN65C3232D

✅ Sustitución directa
📦 16-SOIC
Two-channel RS-232 transceiver with two drivers, two receivers, dual charge pump, and ±15 kV ESD protection; exact pin mapping and limits require comparison.

📋 Alternativa de referencia (no en el catálogo)

MAX3232CDG4 Especificaciones

Device Type 2/2 RS-232 line transceiver
Number of Drivers 2
Number of Receivers 2
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbit/s
ESD Protection ±15 kV using the human-body model
Interface Standard TIA/EIA-232-F and ITU V.28
Rango de temperatura de funcionamiento 0 °C to 70 °C
Encapsulado 16-SOIC, 3.90 mm width
Tipo de montaje Surface mount
External Capacitors 4 × 0.1 µF
Supply Type Single supply
Charge-Pump Architecture Integrated dual charge pump
Logic Compatibility 3.3 V and 5 V CMOS logic
Packaging Tube
Lead-Free Status Lead free

Guía de configuración de pines de MAX3232CDG4 16-soic, 3.90 mm width

Configuración de pines para MAX3232CDG4 (encapsulado 16-soic, 3.90 mm width). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 16-soic, 3.90 mm width para MAX3232CDG4

No hay datos detallados de patillaje disponibles para MAX3232CDG4.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MAX3232CDG4 es adecuado para 6 aplicacións: Industrial Serial Consoles, Point-of-Sale Terminals, Data-Acquisition Instruments, Legacy Peripheral Connectivity, Network Equipment Management, Automated Test Equipment.

🏭

Industrial Serial Consoles

The MAX3232CDG4 fits industrial console and service-port designs that require a modern 3.3 V or 5 V host controller to communicate through a true RS-232 port. Its two drivers and two receivers support full-duplex serial links, while the 250 kbit/s maximum rate exceeds common console baud rates. The integrated charge pump reduces the number of external active components, although four 0.1 µF capacitors are still required. Place the capacitors close to their associated pins, connect the interface ground to the host ground, and route the bipolar driver outputs away from sensitive logic. The 0 °C to 70 °C operating range suits controlled indoor equipment, but outdoor machinery may require a wider-temperature alternative.

🖥️

Point-of-Sale Terminals

Point-of-sale equipment often combines a low-voltage application processor with legacy peripherals that expose RS-232 connections. The MAX3232CDG4 provides the electrical conversion needed between host-side CMOS logic and bipolar RS-232 signals. Two transmit and two receive channels are useful for paired service, printer, or peripheral links, and the 250 kbit/s capability provides ample margin for typical serial transactions. Its 3 V to 5.5 V operating range aligns with common embedded and industrial computing platforms. Designers should verify the UART signal levels, provide a reliable common ground, and keep charge-pump nodes and switching-capacitor current away from sensitive display, touchscreen, and communication circuitry.

🔧

Data-Acquisition Instruments

The MAX3232CDG4 can serve as the RS-232 interface for laboratory instruments, factory test equipment, and compact data-acquisition controllers. The device bridges a UART or microcontroller to a conventional RS-232 port at rates up to 250 kbit/s, allowing legacy host computers or test systems to exchange commands and measurement data. Its integrated charge-pump circuitry simplifies the physical interface compared with a discrete bipolar driver implementation. For reliable measurements, isolate noisy relay, motor, or actuator wiring from the transceiver, use a short ground-reference path, and confirm that external protection devices do not distort the receiver thresholds or driver rise and fall behavior.

🔌

Legacy Peripheral Connectivity

MAX3232CDG4 is useful when an embedded controller must maintain compatibility with legacy RS-232 printers, scanners, programmers, or service adapters. The two-channel architecture supports simultaneous transmit and receive paths, and the single 3 V to 5.5 V supply simplifies integration with modern digital systems. Its ±15 kV human-body-model ESD rating improves robustness at accessible connector points, although board-level protection and cable practices remain important. The design should account for the voltage reference of RS-232, which is ground-referenced and single-ended rather than differential. Confirm the pin mapping, connector protection, and UART baud-rate tolerance for every peripheral before releasing the PCB.

🌐

Network Equipment Management

The MAX3232CDG4 can provide a dedicated management or console interface for network appliances, gateways, and communications equipment. A low-power management processor can use the transceiver to connect an RS-232 service port to configuration equipment or a legacy management system. The 250 kbit/s signaling capability is more than sufficient for command traffic, while the 3 V to 5.5 V supply range supports embedded system rails. Place the interface near its connector, maintain a low-impedance common-ground connection, and separate the switching charge-pump region from clock-sensitive circuitry. The commercial-temperature version is appropriate where the enclosure remains within 0 °C to 70 °C.

⚡

Automated Test Equipment

The MAX3232CDG4 is appropriate for automated test equipment requiring a compact host-to-fixture RS-232 control path. Its dual drivers and receivers permit bidirectional command and status communication between a controller and legacy test hardware. The integrated charge pump provides the required bipolar interface from a 3.3 V or 5 V supply, and the 250 kbit/s rate supports common test-control protocols. Designers should establish one solid interface ground, protect the connector against cable transients, and route the RS-232 nets separately from high-voltage switching nodes. Because the C-grade device is rated from 0 °C to 70 °C, production test-floor temperature extremes may justify selecting an industrial-temperature alternative.

Resumen de productos recomendados

MAX3232CDWR Same MAX3232C family in a 16-SOIC package Se usa en: Industrial Serial Consoles MAX3232EIDWR Improved-generation RS-232 transceiver option Se usa en: Industrial Serial Consoles, Network Equipment Management, Automated Test Equipment SN65C3232D Dual RS-232 transceiver alternative Se usa en: Point-of-Sale Terminals, Legacy Peripheral Connectivity TS321IDR Texas Instruments Se usa en: Point-of-Sale Terminals MAX3232CDE4 Texas Instruments Se usa en: Data-Acquisition Instruments, Automated Test Equipment MAX3232ECDR Texas Instruments Se usa en: Data-Acquisition Instruments MAX3232ID Texas Instruments Se usa en: Legacy Peripheral Connectivity MAX3232ECWE E-generation MAX3232 interface option Se usa en: Network Equipment Management
What is the MAX3232CDG4?
The MAX3232CDG4 is a dual RS-232 transceiver from Texas Instruments with two line drivers, two line receivers, a 3 V to 5.5 V supply range, and operation up to 250 kbit/s. According to the manufacturer datasheet, the 16-pin SOIC device provides ±15 kV human-body-model ESD protection and uses four external 0.1 µF capacitors for its charge-pump and supply functions.
What are the key specifications of MAX3232CDG4 that engineers should know?
The MAX3232CDG4 provides two RS-232 transmitters, two receivers, a single 3 V to 5.5 V supply, and a maximum signaling rate of 250 kbit/s. Texas Instruments specifies ±15 kV human-body-model ESD protection, TIA/EIA-232-F and ITU V.28 compatibility, a 0 °C to 70 °C commercial-temperature range, and a 16-SOIC package. The design also requires four external 0.1 µF capacitors.
What is the operating voltage of MAX3232CDG4?
The MAX3232CDG4 operates from a 3 V to 5.5 V supply. According to the Texas Instruments datasheet, this range supports modern 3.3 V and 5 V host systems while the integrated charge pump generates the positive and negative voltages required by an RS-232 interface. The host-side logic and the transceiver supply should be checked against the exact electrical limits before layout release.
What is the maximum data rate of MAX3232CDG4?
The MAX3232CDG4 supports a maximum data rate of 250 kbit/s. According to the manufacturer datasheet, this rate applies to its two-driver, two-receiver RS-232 interface. A UART operating faster than that limit will require a faster transceiver, so cable length, baud rate, and signal integrity should be reviewed together when selecting the interface.
Where can I download the MAX3232CDG4 datasheet PDF?
The official Texas Instruments datasheet is available from the MAX3232 family document at https://www.ti.com/lit/ds/symlink/max3232.pdf. The document contains the complete pin descriptions, charge-pump capacitor connections, electrical characteristics, timing information, and recommended operating conditions. Use the ordering information to confirm that the MAX3232CDG4 suffix refers to the commercial-temperature 16-SOIC configuration.
Where can I find the MAX3232CDG4 pinout?
The MAX3232CDG4 pinout is defined by the manufacturer’s MAX3232 datasheet and uses a 16-pin SOIC footprint. The public pin descriptions and connection diagram should be used when assigning supply, ground, charge-pump capacitor, driver-output, and receiver-input nets. A complete numbered pin table is not reproduced on this page, so consult the official pin-description drawing before routing the PCB.
Where to buy MAX3232CDG4 online?
Use the Request a Quote form on this page to request MAX3232CDG4 availability, current lead time, and order confirmation. The form is the direct route for a quotation covering the exact Texas Instruments suffix, tube packaging, and delivery requirements. Engineers should include the target quantity and any required production or traceability information in the request.
What is the price of MAX3232CDG4?
The current price for MAX3232CDG4 should be requested through the Request a Quote form on this page. A quotation can reflect the exact manufacturer suffix, quantity, tube packaging, and current lead time. The price shown by a buyer may change as sourcing conditions and order volume change, so it is best to use the live quote response for procurement.
What is the lead time for MAX3232CDG4?
Request the current MAX3232CDG4 lead time through the Request a Quote form on this page. The response should state the available quantity, manufacturing or stock condition, estimated delivery timing, and minimum order quantity for the requested tube-packaged quantity. Current lead time should not be inferred from an older inventory snapshot or a generic product-page availability statement.
Is MAX3232CDG4 in stock?
Current MAX3232CDG4 stock should be confirmed through the Request a Quote form on this page. The form can provide the exact suffix, package format, available quantity, and expected delivery window for the requested order. Inventory can move between the manufacturer, authorized channels, and customer orders, so a confirmed quotation is the appropriate purchasing response.
What is the difference between MAX3232CDG4 and MAX3232EIDWR?
The MAX3232CDG4 and MAX3232EIDWR both provide dual RS-232 transceivers in 16-pin SOIC packages, but the E-generation device is the improved-generation part. Texas Instruments identifies MAX3232E as an improved direct drop-in replacement for MAX3232. The MAX3232EIDWR also carries an industrial-temperature designation, so temperature range, qualification, and exact suffix requirements should be checked before substitution.
Is MAX3232CDG4 the same as SN65C3232D?
No, the MAX3232CDG4 and SN65C3232D are related but distinct dual RS-232 transceivers. The cross-reference description for SN65C3232D identifies two drivers, two receivers, a dual charge pump, and ±15 kV ESD protection, making it a close functional alternative. The physical footprint and every connected pin must still be checked against each device’s official pin-description table before reuse.
What is the best drop-in replacement for MAX3232CDG4?
The MAX3232E-family devices are the strongest drop-in candidates for the MAX3232CDG4 because Texas Instruments describes MAX3232E as an improved direct drop-in replacement. MAX3232CDE4 and MAX3232EIDWR are 16-pin SOIC options, while MAX3232CDWR is a packaging variant of the original device. Confirm the exact suffix, temperature grade, electrical characteristics, and pin mapping before production use.
When should I choose MAX3232CDG4 over MAX3232EIDWR?
Choose MAX3232CDG4 when its commercial-temperature operating range and standard MAX3232C feature set meet the product requirements and the exact suffix is already approved for the design. Choose MAX3232EIDWR when the improved E-generation behavior or wider industrial-temperature range is required. Both use a 16-pin SOIC format, but the exact electrical and temperature differences must be reviewed before substitution.
Is MAX3232CDG4 suitable for industrial serial equipment?
The MAX3232CDG4 is suitable for equipment whose environmental requirements stay within its 0 °C to 70 °C operating range. For systems operating below 0 °C or above 70 °C, select an appropriately temperature-rated RS-232 transceiver and verify its pin compatibility. Its 250 kbit/s capability and ±15 kV human-body-model ESD protection make it useful for conventional industrial serial links.

Datos de referencia de ingeniería para MAX3232CDG4 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MAX3232CDG4 for a new 3.3 V or 5 V RS-232 design that needs two drivers, two receivers, operation up to 250 kbit/s, and operation within 0 °C to 70 °C. Choose MAX3232EIDWR when the improved MAX3232E generation or industrial-temperature range is preferable; Texas Instruments identifies MAX3232E as a direct drop-in replacement for MAX3232. Use MAX3232CDE4 for the corresponding MAX3232C 16-SOIC configuration when its exact suffix and temperature grade satisfy the design. MAX3232ID, MAX3232ECDR, and MAX3232ECWE offer further same-family 16-SOIC paths, but each requires a separate review of electrical limits and ordering details. SN65C3232D is a close dual-transceiver alternative with ±15 kV HBM protection, yet its pin-description table and characteristics must be compared before reuse. For every substitute, verify the full 16-pin connection, capacitor network, temperature range, logic thresholds, and lifecycle requirements.

Comparación con alternativas

Parámetro Este producto MAX3232CDE4 MAX3232EIDWR MAX3232ID MAX3232ECDR MAX3232ECWE SN65C3232D
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Device Type 2/2 RS-232 transceiver MAX3232C RS-232 transceiver MAX3232E RS-232 transceiver MAX3232 RS-232 transceiver MAX3232E RS-232 transceiver MAX3232E RS-232 transceiver 2-channel RS-232 transceiver
Generation MAX3232C MAX3232C MAX3232E improved generation MAX3232 MAX3232E improved generation MAX3232E improved generation SN65C3232D

Diferenciadores clave

  • Original MAX3232C feature set with two full-duplex channels (frente a SN65C3232D)
  • Direct path to the manufacturer's improved MAX3232E generation (frente a MAX3232EIDWR)
  • Commercial-temperature MAX3232C configuration in a standard 16-SOIC package (frente a MAX3232EIDWR)

Notas de diseño

Place the four required 0.1 µF charge-pump and supply capacitors close to the pins identified in the manufacturer pin-description diagram. Keep each capacitor’s return path short and avoid routing the associated switching node beneath sensitive analog or high-speed digital traces. A common layout error is to place capacitors only near the IC while allowing long connections to the charge-pump reservoir nodes, which can increase ringing and reduce margin.

Separate the bipolar RS-232 driver outputs and receiver inputs from clocks, resets, ADC inputs, and other sensitive nets. RS-232 is a single-ended, ground-referenced interface, so connect the transceiver and host grounds through a low-impedance path. Do not treat the interface as differential; use the connector and cable ground as the signal reference, and avoid sharing narrow ground paths with motor, relay, or switching-power currents.

Confirm the MAX3232CDG4 16-SOIC pin mapping and the exact ordering suffix before substituting a MAX3232E or SN65C3232D device. Check supply range, UART logic compatibility, operating temperature, ESD rating, driver slew behavior, receiver thresholds, and capacitor connections. Even when all parts use a 16-SOIC outline, a shared body size does not by itself prove that every pin can be replaced without review.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Yes
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The component is identified as lead free. RoHS, REACH, halogen-free, and conflict-minerals statuses were not explicitly established by the cited product information.

Datos verificados el: 2026-11-09 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MAX3232CDG4 datasheet MAX3232CDG4 pinout MAX3232CDG4 datasheet pdf MAX3232CDG4 specifications MAX3232CDG4 equivalent MAX3232CDG4 replacement MAX3232CDG4 cross reference MAX3232CDG4 vs MAX3232EIDWR MAX3232CDG4 footprint Texas Instruments MAX3232CDG4 MAX3232CDG4 price MAX3232CDG4 stock MAX3232 16-SOIC pinout MAX3232 RS-232 application circuit

Componentes & términos relacionados

Texas Instruments MAX3232CDG4 MAX3232CDE4 MAX3232EIDWR MAX3232ID MAX3232ECDR MAX3232ECWE SN65C3232D RS-232 RS-232 transceiver line driver line receiver interface IC charge pump CMOS UART TIA/EIA-232-F ITU V.28 16-SOIC SOIC package family surface-mount package 3 V to 5.5 V supply 250 kbit/s ±15 kV HBM ESD protection industrial serial communication
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ