Texas Instruments

MAX3232ECDW - 3-5.5V RS-232 Transceiver | Texas Instruments

N.º de pieza: MAX3232ECDW ✓ Activo
3 V to 5.5 V Vdss 16-pin SOIC Package
MOQ: 1 |

MAX3232ECDW Descripción general

The Texas Instruments MAX3232ECDW is a 3 V to 5.5 V RS-232 line-driver and receiver transceiver with two transmitters, two receivers, ±15 kV IEC ESD protection, and a 16-pin SOIC package. It provides the electrical interface between an asynchronous communication controller and an RS-232 serial-port connector.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 levels and converts received RS-232 signals back into logic levels. It belongs to the hierarchy of serial-interface transceivers, communication interface ICs, and semiconductor interface devices. The MAX3232E family also integrates a dual charge pump, allowing operation from a single 3 V to 5.5 V supply without a separate negative supply rail.

The device provides two RS-232 transmitters and two RS-232 receivers in a 16-pin SOIC package. Its operating supply range of 3 V to 5.5 V supports both 3.3 V and 5 V system environments. Pin-to-pin IEC ESD protection of ±15 kV applies to the serial-port connection pins, including ground, improving interface robustness in electrically noisy installations.

According to the Texas Instruments MAX3232E product page, the MAX3232E meets TIA/EIA-232-F requirements. The integrated dual charge pump generates the positive and negative voltages required for RS-232 signaling while keeping the external power-supply requirement to a single positive rail. The interface separates external line-side signals from the logic-side circuitry used by UART and other asynchronous controllers.

Typical uses include industrial serial adapters, barcode readers, test and measurement equipment, security consoles, and embedded systems that retain an RS-232 port. The device is particularly suitable when a modern 3.3 V controller must communicate with legacy RS-232 equipment through a compact, surface-mount interface. Its 16-pin SOIC package also simplifies assembly and inspection in designs that do not require an extended-voltage transceiver.

Decoupling capacitor placement is critical to charge-pump performance. Follow the manufacturer datasheet when placing the charge-pump fly capacitors, supply bypass capacitor, and connector-side protection network. Keep the serial traces short, route them away from clocks and switching nodes, and provide a low-impedance ground return between the transceiver and connector.

This page combines electrical specifications, pin-level guidance, drop-in cross-references, and application-focused design notes. It helps engineers distinguish the MAX3232ECDW from related MAX3232E and MAX3232C variants while preserving the same 16-pin SOIC board footprint during sourcing or redesign.

Alternativas directas para MAX3232ECDW — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MAX3232ECDW (mismo factor de forma y huella) — difiere en Product Type, Package, ESD Protection, Maximum Data Rate, External Charge-Pump Capacitors.

Texas Instruments
Product Type: Dual RS-232 line driver/receiver transceiver
Package: 16-SOIC, 7.50 mm width
ESD Protection: ±15 kV
Comparar con MAX3232ECDW →
Texas Instruments
Product Type: Dual RS-232 line driver/receiver transceiver
Package: 16-pin TSSOP (PW)
ESD Protection: ±15 kV
Comparar con MAX3232ECDW →
Analog Devices
Product Type: Dual RS-232 transceiver
Maximum Data Rate: 1 Mbps
External Charge-Pump Capacitors: 4 x 0.1 µF
Comparar con MAX3232ECDW →
Maxim Integrated
Product Type: RS-232 transceiver interface IC
Package: 16-pin wide SOIC
Maximum Data Rate: 1 Mbps
Comparar con MAX3232ECDW →
Maxim Integrated
Product Type: RS-232 transceiver
ESD Protection: ±15 kV
Maximum Data Rate: 1 Mbps
Comparar con MAX3232ECDW →
Texas Instruments
Product Type: RS-232 line driver and receiver transceiver
ESD Protection: ±15 kV IEC ESD protection
Comparar con MAX3232ECDW →
Texas Instruments
Product Type: Dual RS-232 line driver/receiver
Package: 16-pin SOIC (DW)
ESD Protection: ±15 kV
Comparar con MAX3232ECDW →
MaxLinear
ESD Protection: 15 kV on RS-232 pins

MAX3232EIDWR

✅ Sustitución directa
📦 SOIC-16
Same 2-driver, 2-receiver topology and 3 V to 5.5 V supply, representing 0% channel-count difference, while the ordering code selects an industrial-temperature option.

📋 Alternativa de referencia (no en el catálogo)

MAX3232ECWE+

✅ Sustitución directa
Maxim Integrated
📦 SOIC-16
RS-232 transceiver · 2 · 2 · Full-duplex · 3.0 V to 5.5 V · 1 Mbps · ±15 kV · Down to 10 nA

Consulte el precio

Ver hoja de datos →

MAX3232CDW

✅ Sustitución directa
Texas Instruments
📦 SOIC-16
Dual RS-232 line driver/receiver transceiver · 2 · 2 · 3 V to 5.5 V · 250 kbit/s · 300 µA · 5 V logic · 0.1 µF

Consulte el precio

Ver hoja de datos →

MAX3232CPWR

✅ Sustitución directa
Texas Instruments
📦 SOIC-16
Dual RS-232 line driver/receiver transceiver · 3 V to 5.5 V · 250 kbit/s · 2 · 2 · ±15 kV · 300 µA · 0.1 µF

Consulte el precio

Ver hoja de datos →

SP3232EBCN-L/TR

✅ Sustitución directa
MaxLinear
📦 SOIC-16
2/2 · Full duplex RS-232 transceiver · 3 V to 5.5 V · 250 kbps under load · 15 kV on RS-232 pins · True EIA/TIA-232-F · On-chip charge pump, single supply · 0.1 uF per pump node

✓ En stock

$0.7711 / unidad

Ver hoja de datos →

MAX3232ECDW Especificaciones

Product Type RS-232 line-driver and receiver transceiver
Supply Voltage Range 3 V to 5.5 V
Number of Transmitters 2
Number of Receivers 2
Interface Standard RS-232
Compliance Standard TIA/EIA-232-F
ESD Protection ±15 kV IEC pin-to-pin
Charge Pump Integrated dual charge pump
Logic Supply Requirement Single 3 V to 5.5 V supply
Encapsulado 16-pin SOIC
Package Dimensions 7.50 mm body width
Tipo de montaje Surface mount
Recuento de pines 16 pins

Configuración de pines de MAX3232ECDW

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
Pin 1 C1+ — Charge-pump capacitor 1 positive terminal
Pin 2 V+ — Charge-pump positive output
Pin 3 C1- — Charge-pump capacitor 1 negative terminal
Pin 4 C2+ — Charge-pump capacitor 2 positive terminal
Pin 5 C2- — Charge-pump capacitor 2 negative terminal
Pin 6 V- — Charge-pump negative output
Pin 7 R1OUT — Receiver 1 logic output
Pin 8 R1IN — Receiver 1 RS-232 input
Pin 9 T1OUT — Transmitter 1 RS-232 output
Pin 10 T2IN — Transmitter 2 logic input
Pin 11 R2OUT — Receiver 2 logic output
Pin 12 R2IN — Receiver 2 RS-232 input
Pin 13 T1IN — Transmitter 1 logic input
Pin 14 GND — Device ground
Pin 15 VCC — Positive supply input
Pin 16 T2OUT — Transmitter 2 RS-232 output

Aplicaciones típicas

MAX3232ECDW es adecuado para 6 aplicacións: Industrial Serial Port Interface, Barcode Reader Connectivity, Test and Measurement Equipment, Security and Access Control, Point-of-Sale Terminal, Embedded Service Console.

🏭

Industrial Serial Port Interface

The MAX3232ECDW fits industrial serial adapters that connect a 3.3 V or 5 V controller to an RS-232 equipment port. Its two transmitters and two receivers support full-duplex serial communication, while the 3 V to 5.5 V supply range allows use with either common logic rail. The ±15 kV IEC pin-to-pin ESD protection strengthens the connector side of systems exposed to electrostatic discharge. Place the charge-pump capacitors and supply bypass capacitor according to the manufacturer datasheet, and route the connector-side traces as short as practical.

📷

Barcode Reader Connectivity

The MAX3232ECDW provides a compact interface between a barcode scanner with an RS-232 port and a host controller operating from 3.3 V or 5 V. Two transmitters and receivers permit simultaneous transmit and receive channels when the scanner protocol requires bidirectional communication. Its 16-pin SOIC package preserves PCB area, and its ±15 kV IEC line-side ESD protection is useful in retail, warehouse, and logistics equipment where a scanner cable may be handled frequently.

🖥️

Test and Measurement Equipment

The MAX3232ECDW is appropriate for test instruments and laboratory controllers that retain RS-232 service or communication ports. A single 3 V to 5.5 V supply simplifies interface implementation, and the integrated dual charge pump avoids requiring a separate negative rail. The two-channel driver and receiver arrangement supports common diagnostic protocols. Because external test leads and cables can carry electrostatic discharge, the family's ±15 kV IEC pin-to-pin protection provides a useful first layer of ruggedization, although separate surge and cable protection may still be required.

🛡️

Security and Access Control

The MAX3232ECDW can connect RS-232 access-control readers, controllers, and alarm panels to a 3.3 V or 5 V embedded system. The dual-driver, dual-receiver arrangement supports typical request-and-response serial links without requiring a larger multi-channel transceiver. Its 16-pin SOIC package is practical for compact controller boards, while ±15 kV IEC protection on the serial connection pins improves resilience against electrostatic discharge encountered around door hardware and installed cabling.

🖥️

Point-of-Sale Terminal

The MAX3232ECDW is useful in point-of-sale terminals, receipt printers, scales, and customer displays that use legacy RS-232 links. Operating from 3 V to 5.5 V allows it to share either the terminal's 3.3 V logic rail or a 5 V peripheral rail. Two transmitters and two receivers cover standard bidirectional serial communication, and the small SOIC footprint limits board consumption. The ±15 kV IEC protection rating should be considered when the peripheral cable connects to equipment that may be touched by users.

🔧

Embedded Service Console

The MAX3232ECDW can serve as the RS-232 interface for an embedded service console used during configuration, diagnostics, or firmware maintenance. The device's 3 V to 5.5 V operating range accommodates both 3.3 V and 5 V embedded processors, while the integrated dual charge pump simplifies the power architecture. Its two transmitters and two receivers support a full-duplex console connection. In unattended equipment, line-side ESD protection helps limit damage from service leads, but the connector should still include appropriately selected surge protection for the installation environment.

Resumen de productos recomendados

Z86E4412FSC Zilog Se usa en: Industrial Serial Port Interface Z86E4016FSC Zilog Se usa en: Industrial Serial Port Interface Z86E3412PSC Zilog Se usa en: Barcode Reader Connectivity Z86E3312VSC Zilog Se usa en: Barcode Reader Connectivity Z86E3116VSC Zilog Se usa en: Test and Measurement Equipment Z86E2312VSC UART interface controller for instrument firmware Se usa en: Test and Measurement Equipment Z86E1512PSC Embedded serial controller for access-control equipment Se usa en: Security and Access Control Z86E1505PSC Zilog Se usa en: Security and Access Control Z86E2304VSC Zilog Se usa en: Point-of-Sale Terminal Z86E2304PSC Zilog Se usa en: Point-of-Sale Terminal Z86E2412PSC Embedded serial controller for maintenance-console communication Se usa en: Embedded Service Console Z86E2412VSC Alternate controller implementation for service ports Se usa en: Embedded Service Console
What are the key specifications of MAX3232ECDW that engineers should know?
The MAX3232ECDW is a dual RS-232 transceiver with two transmitters, two receivers, a 3 V to 5.5 V supply range, and ±15 kV IEC pin-to-pin ESD protection. According to the Texas Instruments MAX3232E datasheet, it meets TIA/EIA-232-F requirements and uses an integrated dual charge pump to generate the bipolar RS-232 signal levels from one positive supply. The device is packaged in a 16-pin SOIC.
Where can I download the MAX3232ECDW datasheet PDF?
The MAX3232ECDW datasheet PDF is available from Texas Instruments through the official MAX3232E product documentation. The manufacturer datasheet describes the 3 V to 5.5 V supply range, two transmitters, two receivers, integrated charge pump, ±15 kV IEC ESD protection, electrical characteristics, capacitor requirements, and the complete 16-pin pinout. Use the MAX3232E family datasheet because MAX3232ECDW is an orderable member of that family.
Where can I find the MAX3232ECDW pinout?
The MAX3232ECDW pinout is shown in the pin-description and connection-diagram sections of the Texas Instruments MAX3232E datasheet. The 16-pin SOIC includes charge-pump capacitor pins, supply and ground, receiver inputs and outputs, and transmitter inputs and outputs. Use the numbered connection diagram when assigning PCB nets and placing the required charge-pump and bypass capacitors.
Can MAX3232ECDW operate from a 3.3 V supply?
Yes, the MAX3232ECDW supports a supply voltage from 3 V to 5.5 V, so a regulated 3.3 V rail is suitable. According to the manufacturer datasheet, the integrated charge pump provides the voltage conversion needed for RS-232 signaling. The logic-side interface therefore supports 3.3 V systems while retaining compatibility with RS-232 line levels.
What is the best drop-in replacement for MAX3232ECDW?
The MAX3232EIDWR is a pin-compatible replacement when an industrial-temperature option in the same 16-pin SOIC footprint is acceptable. The MAX3232ECWE+ and SP3232EBCN-L/TR are also cross-referenced as pin-compatible options. Confirm the required temperature grade, ESD rating, supply range, lifecycle status, and connector-side compliance before approving any substitution.
What can replace MAX3232ECDW?
MAX3232EIDWR, MAX3232ECWE+, MAX3232CDW, MAX3232CPWR, and SP3232EBCN-L/TR are candidate 16-pin SOIC replacements for MAX3232ECDW. The MaxLinear cross-reference identifies SP3232EBCN-L/TR as pin compatible, while Texas Instruments comparison material identifies MAX3232E as a direct improvement to MAX3232. Verify temperature grade and ESD requirements because those attributes distinguish the otherwise similar variants.
Is MAX3232ECDW the same as MAX3232EIDWR?
No, the two devices use the same 16-pin SOIC interface but are not identical in every ordering attribute. MAX3232EIDWR provides an industrial-temperature option for designs that need extended-temperature operation. MAX3232ECDW remains the appropriate selection when its specified temperature range and commercial ordering configuration satisfy the product requirements.
What is the best SP3232EBCN-L/TR equivalent for MAX3232ECDW?
The SP3232EBCN-L/TR is a cross-brand, pin-compatible 16-pin SOIC candidate for MAX3232ECDW. The MaxLinear cross-reference identifies it as functionally equivalent and pin compatible. An engineering approval should still confirm supply voltage, channel count, ESD rating, temperature range, charge-pump capacitor values, and the exact board footprint before production use.
MAX3232ECDW vs MAX3232EIDWR: which is better for industrial equipment?
MAX3232EIDWR is generally the better candidate for industrial equipment requiring an extended industrial temperature option, while MAX3232ECDW is suitable when its operating-temperature specification covers the enclosure environment. Both provide a two-driver, two-receiver RS-232 interface in a 16-pin SOIC footprint. The decision should be based on the minimum ambient temperature, production temperature grade, and qualification requirements.
When should I choose MAX3232ECDW over MAX3232CDW?
Choose MAX3232ECDW when the interface requires the MAX3232E family's ±15 kV IEC pin-to-pin ESD protection rather than the protection associated with the MAX3232C variant. Both parts use the familiar 16-pin SOIC RS-232 arrangement, but ESD capability is a meaningful distinction for cables connected to industrial, laboratory, or external equipment. Verify the exact replacement requirements before using either ordering code.
Is MAX3232ECDW suitable for a 5 V industrial RS-232 port?
The MAX3232ECDW is suitable for a 5 V RS-232 interface because its specified supply range is 3 V to 5.5 V and it includes two drivers and two receivers. Its ±15 kV IEC ESD protection strengthens the line-side interface. The completed design must also meet the enclosure's temperature requirements and provide the charge-pump capacitors and connector protection recommended by the manufacturer.
Where can I buy MAX3232ECDW online and what is its price?
Use the Request a Quote form on this page to request current MAX3232ECDW availability, unit pricing, and lead time. The form is the appropriate commercial channel for a quote-based purchase, and it avoids presenting stale pricing for a standard catalog part. Include the required quantity, reel or tube packaging preference, and destination country when submitting the request.
Is MAX3232ECDW in stock and what is its lead time?
Current MAX3232ECDW stock and manufacturing lead time should be confirmed through the Request a Quote form on this page. Quote confirmation is required because inventory and lead time can change independently of the device's lifecycle status. Provide the quantity, package preference, and project schedule so the commercial response reflects the actual production requirement.
How does MAX3232ECDW protect an RS-232 connector?
The MAX3232ECDW provides ±15 kV IEC pin-to-pin ESD protection on the serial-port connection pins, including ground, according to the Texas Instruments MAX3232E product page. This protection is intended for the line-side connector interface rather than replacing an external surge-protection network. A complete design should still assess cable length, grounding, ESD routing, and connector selection.
What standards and environmental ratings should be checked for MAX3232ECDW?
The MAX3232ECDW meets TIA/EIA-232-F and includes ±15 kV IEC pin-to-pin ESD protection. Its operating-temperature endpoints, RoHS status, REACH status, and automotive qualification status are not stated in the cited product summaries and must be confirmed in the manufacturer datasheet or applicable compliance documentation. Do not assume industrial or automotive qualification solely from the ordering code.

Datos de referencia de ingeniería para MAX3232ECDW — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MAX3232ECDW when a compact 16-pin SOIC RS-232 interface must operate from a 3.3 V or 5 V rail and the line side benefits from ±15 kV IEC pin-to-pin ESD protection. MAX3232EIDWR is the more relevant same-brand option when an industrial-temperature ordering variant is required for the enclosure or production specification. MAX3232ECWE+ offers another same-brand SOIC-16 sourcing path, but its exact temperature and lifecycle conditions should be confirmed. MAX3232CDW and MAX3232CPWR are pin-compatible choices when the MAX3232E ESD advantage is unnecessary and the lower-protection family is otherwise acceptable. SP3232EBCN-L/TR is useful for supply diversification because the cross-reference identifies it as pin compatible, but approval should include detailed checks of temperature grade, ESD rating, capacitor values, and lifecycle status.

Comparación con alternativas

Parámetro Este producto MAX3232EIDWR MAX3232ECWE+ MAX3232CDW MAX3232CPWR SP3232EBCN-L/TR
Package SOIC-16 SOIC-16 SOIC-16 SOIC-16 SOIC-16 SOIC-16
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments MaxLinear

Diferenciadores clave

  • Higher specified connector-side ESD protection than the MAX3232C alternatives (frente a MAX3232CDW)
  • Pin-compatible industrial-temperature sourcing option (frente a MAX3232EIDWR)
  • Second-source path with the same SOIC-16 footprint (frente a SP3232EBCN-L/TR)

Notas de diseño

Place the C1 and C2 charge-pump capacitors directly across their designated pins with minimal loop area and short ground returns. Add the recommended supply bypass capacitor at VCC and route it to the ground reference in the same way. Component-placement changes can increase charge-pump ripple and reduce margin for reliable RS-232 signaling.

Keep the connector-side RIN and TOUT nets away from clocks, switching regulators, and high-current return paths. Maintain a continuous ground reference between the SOIC ground pin and the connector shield or signal ground. Use controlled-impedance routing if the cable or PCB interconnect is long, and avoid adding unnecessary stubs near the RS-232 pins.

Do not treat the integrated ±15 kV IEC ESD rating as a complete surge-protection solution. The protection is designed for electrostatic-discharge events on the specified pins, while lightning, switching transients, and long cable installations may require coordinated surge and overvoltage protection. Confirm that capacitor values, pin orientation, and the MAX3232E versus MAX3232C ESD requirement match the selected ordering code.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer material identifies TIA/EIA-232-F compliance and ±15 kV IEC pin-to-pin ESD protection. RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses were not established by the cited product summaries.

Datos verificados el: 2026-11-17 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MAX3232ECDW datasheet MAX3232ECDW pinout MAX3232ECDW datasheet pdf Texas Instruments MAX3232ECDW MAX3232ECDW RS-232 transceiver MAX3232ECDW 3-5.5V MAX3232ECDW SOIC-16 MAX3232ECDW equivalent MAX3232ECDW replacement MAX3232ECDW drop-in replacement MAX3232ECDW vs MAX3232EIDWR MAX3232ECDW price MAX3232ECDW stock MAX3232ECDW industrial serial interface

Componentes & términos relacionados

Texas Instruments MAX3232ECDW MAX3232E MAX3232EIDWR MAX3232ECWE+ MAX3232CDW MAX3232CPWR SP3232EBCN-L/TR MaxLinear RS-232 RS-232 transceiver line driver line receiver serial interface communication interface IC charge pump TIA/EIA-232-F IEC ESD protection SOIC-16 surface mount UART industrial serial adapter barcode reader point-of-sale terminal
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ