Analog Devices

MAX3232EEWE+G1Z - 2/2 RS-232 Transceiver | Analog Devices

N.º de pieza: MAX3232EEWE+G1Z ✓ Activo
3.0V to 5.5V Vdss Down to 10nA Id 16-pin SOIC Package
MOQ: 1 |

MAX3232EEWE+G1Z Descripción general

Analog Devices MAX3232EEWE+G1Z is a 2/2 true RS-232 transceiver with two drivers and two receivers, operating from 3.0V to 5.5V and supporting data rates up to 1Mbps. The device is housed in a 16-pin SOIC package and provides ±15kV ESD protection on its RS-232 interface pins. Its low-power design operates down to 10nA, making it suitable for low-power serial equipment.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received RS-232 signals back into logic-compatible signals. The MAX3232EEWE+G1Z belongs to the transceiver class of interface ICs, combining two transmit channels and two receive channels in one package. This integrated arrangement reduces board area and simplifies design of point-to-point serial links, industrial control equipment, data-acquisition systems, and service interfaces.

Key features include a 3.0V to 5.5V supply range, operation at up to 1Mbps, ±15kV ESD protection, and a low-power specification extending down to 10nA. The 2/2 channel arrangement allows two serial links to be implemented with one package. Its true RS-232 implementation is intended for systems whose connected equipment uses unbalanced RS-232 signaling rather than differential RS-485 or RS-422.

The transceiver translates between modern CMOS logic levels and the voltage levels used by RS-232 equipment. Because RS-232 uses positive and negative signal voltages, the interface requires appropriate charge-pump circuitry and external charge-pump capacitors. The Analog Devices datasheet provides the recommended capacitor values, electrical characteristics, timing information, and pin configuration needed to design the interface correctly.

Typical applications include industrial serial controllers, test and measurement equipment, point-of-sale terminals, data loggers, instrument interfaces, and embedded systems communicating with legacy RS-232 peripherals. It is especially useful where two serial channels are required and a protected 16-pin SOIC footprint is preferable to larger transceiver packages.

PCB layout should keep the charge-pump capacitor connections short, provide an uninterrupted ground path, and route RS-232 traces away from sensitive analog and high-speed digital circuits. External protection or filtering may be needed when cables are long, ports are frequently disconnected, or the interface is exposed to severe industrial transients.

This product page combines the manufacturer interface information with practical selection, layout, and replacement guidance. It also distinguishes the verified electrical characteristics from parameters that require confirmation in the MAX3232E datasheet, helping engineers shorten component qualification without overlooking package and ordering-code differences.

Alternativas directas para MAX3232EEWE+G1Z — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

MAX3232EEWE

✅ Sustitución directa
📦 16-SOIC
Core RS-232 specifications match: 2/2 channels, 3.0V to 5.5V supply, and up to 1Mbps; G1Z is the additional ordering code

📋 Alternativa de referencia (no en el catálogo)

MAX3232EEWE+G1Z Especificaciones

Product Type RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 1Mbps
ESD Protection ±15kV
Low-Power Supply Current Down to 10nA
Encapsulado 16-pin SOIC
Tipo de montaje Surface mount
Interface Standard True RS-232
Moisture Sensitivity Level MSL 1 (Unlimited)
Packaging Tube

Guía de configuración de pines de MAX3232EEWE+G1Z 16-pin soic

Configuración de pines para MAX3232EEWE+G1Z (encapsulado 16-pin soic). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 16-pin soic para MAX3232EEWE+G1Z

No hay datos detallados de patillaje disponibles para MAX3232EEWE+G1Z.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MAX3232EEWE+G1Z es adecuado para 6 aplicacións: Industrial Serial Controllers, Data Acquisition Equipment, Test and Measurement Instruments, Point-of-Sale Terminals, Embedded Serial Gateways, Legacy Peripheral Interfaces.

🏭

Industrial Serial Controllers

The MAX3232EEWE+G1Z is suitable for industrial controllers that need two isolated-by-interface-direction RS-232 communication channels in a compact surface-mount footprint. Its 3.0V to 5.5V operating range supports common embedded supply voltages, while the two-driver and two-receiver arrangement permits bidirectional links to instruments or service equipment. The ±15kV ESD protection rating adds useful protection for ports exposed to routine handling and cable transients. Designers should still evaluate the enclosure, grounding strategy, cable length, and system surge requirements because the transceiver rating does not replace external surge protection.

📊

Data Acquisition Equipment

The MAX3232EEWE+G1Z can connect a data-acquisition controller to two legacy RS-232 devices while operating from a 3.3V or 5V logic supply. Data rates up to 1Mbps provide sufficient bandwidth for command traffic, configuration exchanges, and moderate data streams. Its 16-pin SOIC package helps keep the interface compact, and the 2/2 channel structure reduces the number of interface ICs required. For laboratory or industrial installations, use a suitable ground reference and place optional line protection close to the connector.

🔧

Test and Measurement Instruments

The MAX3232EEWE+G1Z fits test and measurement instruments that expose RS-232 ports for configuration, logging, or legacy instrument control. A 3.0V to 5.5V supply range allows integration with modern control electronics, while operation up to 1Mbps covers common serial-control traffic. The 2/2 channel arrangement can support separate control and diagnostic ports in one 16-pin SOIC package. Because RS-232 is unbalanced and ground-referenced, instrument pairing should be checked for correct signal polarity and a reliable common ground.

🖥️

Point-of-Sale Terminals

The MAX3232EEWE+G1Z can provide legacy peripheral connectivity in point-of-sale terminals, weighing systems, receipt equipment, and customer displays that use RS-232. The 2/2 channel structure can reduce the number of interface chips in a space-constrained enclosure, and the 16-pin SOIC package supports standard surface-mount assembly. Its low-power specification down to 10nA is useful where equipment spends significant time idle. Final port protection should be selected according to cable length, installation environment, and the frequency of hot-plugging.

🌐

Embedded Serial Gateways

The MAX3232EEWE+G1Z is appropriate for embedded serial gateways that translate or monitor RS-232 equipment through a modern controller. Two drivers and two receivers allow the gateway to manage more than one RS-232 port, while the 3.0V to 5.5V range supports common embedded rails. Operation up to 1Mbps is suitable for many telemetry and control protocols. Keep the charge-pump network close to the device and maintain a low-impedance ground path to avoid signal-integrity issues on longer cables.

🔌

Legacy Peripheral Interfaces

The MAX3232EEWE+G1Z provides a practical bridge between modern CMOS-based electronics and legacy RS-232 peripherals. It can be used in service equipment, programmable controllers, communication modules, and diagnostic tools where the peripheral exposes only a serial port. The 16-pin SOIC package simplifies board integration, and ±15kV ESD protection improves robustness at accessible connectors. System designers must confirm logic thresholds, direction control, capacitor selection, and the RS-232 driver load limitations for the connected equipment.

What is the MAX3232EEWE+G1Z?
The MAX3232EEWE+G1Z is a 2/2 true RS-232 transceiver with two drivers and two receivers in a 16-pin SOIC package. According to the Analog Devices MAX3232E product information, it operates from 3.0V to 5.5V, supports data rates up to 1Mbps, and provides ±15kV ESD protection. It is intended for bidirectional and unidirectional equipment connections that require RS-232 rather than differential RS-485 or RS-422 signaling.
What are the key specifications of MAX3232EEWE+G1Z that engineers should know?
The MAX3232EEWE+G1Z combines two RS-232 drivers, two receivers, a 3.0V to 5.5V supply range, and operation up to 1Mbps in a 16-pin SOIC package. The Analog Devices MAX3232E product information also identifies ±15kV ESD protection and low-power operation down to 10nA. These characteristics make it suitable for compact, low-power serial interfaces, although cable length, grounding, and transient exposure must still be evaluated for the target installation.
What is the operating voltage of MAX3232EEWE+G1Z?
The MAX3232EEWE+G1Z operates from 3.0V to 5.5V. This range allows use in both 3.3V and 5V systems, although the exact logic thresholds, load current, and power consumption must be checked against the operating conditions in the Analog Devices datasheet. The device is a true RS-232 transceiver, so its interface voltage levels are generated by the internal charge-pump circuitry rather than being limited to the supply voltage.
Where can I download the MAX3232EEWE+G1Z datasheet PDF?
The manufacturer datasheet and product resources are available through the Analog Devices MAX3232E product page at https://www.analog.com/en/products/max3232e.html. Use the MAX3232E datasheet for the electrical characteristics, RS-232 driver and receiver limits, charge-pump recommendations, package drawings, and pin description. Confirm that the ordering code MAX3232EEWE+G1Z selects the required 16-pin SOIC configuration and tube packing before releasing the BOM.
Where can I find the MAX3232EEWE+G1Z pinout?
The MAX3232EEWE+G1Z pin description and package drawing are contained in the MAX3232E manufacturer datasheet. The device uses a 16-pin SOIC, and the Analog Devices pin-description table should be used to assign driver inputs, receiver outputs, supply, ground, and charge-pump capacitor connections. Do not infer the pinout from the E, EW, or CDR ordering suffixes because those codes identify package and ordering options rather than signal functions.
What can replace the MAX3232EEWE+G1Z?
The MAX3232EEWE is the closest verified same-package option because it is listed as a 2/2 RS-232 transceiver in 16-pin SOIC. It provides a practical drop-in candidate when the G1Z ordering code is the only difference, subject to confirming temperature, ESD, charge-pump capacitor, and production-code requirements. Other MAX3232 variants may use narrower or different SOIC packages, so their suffixes must be checked before treating them as drop-in replacements.
Is the MAX3232EEWE a drop-in replacement for MAX3232EEWE+G1Z?
The MAX3232EEWE is a close same-package replacement candidate for the MAX3232EEWE+G1Z because both are identified as 2/2 RS-232 transceivers in 16-pin SOIC packages. Before substitution, verify the exact ordering suffix, operating-temperature grade, ESD rating, capacitance recommendations, and delivery format. The G1Z code distinguishes the ordered configuration, so a purchasing or assembly change should be documented even when the electrical circuit can remain unchanged.
Where can I buy MAX3232EEWE+G1Z online?
Use the Request a Quote form on this page to request MAX3232EEWE+G1Z availability, current pricing, and lead time. The request should include the required quantity, tube packaging, destination, and target delivery date. This listing identifies the part as a 2/2 RS-232 transceiver in a 16-pin SOIC package, but live stock and shipment scheduling should be confirmed through the quote workflow before production commitments are made.
What is the price of MAX3232EEWE+G1Z?
Use the Request a Quote form on this page for the current price of MAX3232EEWE+G1Z. The quote request can specify the required quantity, tube packaging, and delivery terms so the commercial response reflects the actual order configuration. The verified product listing identifies tube packing and MSL 1, which are useful details when requesting a quotation for prototyping, pilot production, or scheduled assembly.
What is the lead time for MAX3232EEWE+G1Z?
Request the current lead time for MAX3232EEWE+G1Z through the Request a Quote form on this page. Include the annual and prototype quantities, required ship-to location, and date by which material must arrive. The component is identified as a tube-packaged 16-pin SOIC RS-232 transceiver, but manufacturing capacity, component availability, and production scheduling determine the actual lead time.
Is MAX3232EEWE+G1Z in stock?
Current MAX3232EEWE+G1Z stock should be confirmed through the Request a Quote form on this page. Include the required quantity, tube packaging, and delivery schedule so the response can identify available inventory and the earliest fulfillment plan. The verified technical listing establishes the device as a 2/2 RS-232 transceiver in 16-pin SOIC, but it does not constitute a live stock commitment.
When should I choose MAX3232EEWE+G1Z over another RS-232 transceiver?
Choose the MAX3232EEWE+G1Z when the design needs two RS-232 drivers and two receivers in a 16-pin SOIC package with a 3.0V to 5.5V supply and operation up to 1Mbps. Its ±15kV ESD protection and low-power capability down to 10nA are useful in compact equipment. Select another variant instead if the system requires a different channel count, package width, temperature grade, protection level, or transceiver technology.
Is MAX3232EEWE+G1Z suitable for industrial equipment?
The MAX3232EEWE+G1Z is suitable for many industrial serial-control and data-acquisition designs because it provides ±15kV ESD protection, a 3.0V to 5.5V operating range, and 2/2 RS-232 channels. Industrial suitability must also be assessed against the device's specified operating-temperature range, system grounding, cable length, surge environment, and enclosure requirements. Confirm those limits in the Analog Devices datasheet before releasing an industrial design.
What is the difference between MAX3232EEWE+G1Z and MAX3232EEWE?
The MAX3232EEWE+G1Z and MAX3232EEWE are both identified as 2/2 RS-232 transceivers in 16-pin SOIC packages, making the latter a close same-package replacement candidate. Their functional distinction may be confined to the G1Z ordering or packaging code, but temperature range, ESD rating, and exact shipping format must be confirmed from the ordering information. Treat the swap as released only after those fields match the original device.
How does MAX3232EEWE+G1Z compare with MAX3232ECDR and MAX3232EIDR?
The MAX3232ECDR and MAX3232EIDR are related MAX3232 RS-232 transceivers, but they are not automatically drop-in choices for the MAX3232EEWE+G1Z. The suffix CDR identifies a different SOIC package option, while EIDR denotes another orderable package or temperature configuration within the MAX3232 family. Compare body width, lead pitch, exposed dimensions, pin layout, and thermal limits on the package drawings before replacing the 16-pin SOIC MAX3232EEWE+G1Z.
What is the best Analog Devices equivalent for MAX3232EEWE+G1Z?
The MAX3232EEWE is the closest Analog Devices equivalent identified for the MAX3232EEWE+G1Z because both are 2/2 RS-232 transceivers in 16-pin SOIC packages. Its electrical suitability depends on matching the operating-temperature grade, supply limits, ESD requirements, and exact ordering code. MAX3232ECDR and MAX3232EIDR require a package-dimension review and should not be assumed to share the same PCB footprint.

Datos de referencia de ingeniería para MAX3232EEWE+G1Z — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the MAX3232EEWE+G1Z when the design needs two RS-232 drivers and two receivers in a 16-pin SOIC package, a 3.0V to 5.5V supply, operation up to 1Mbps, and ±15kV ESD protection. The MAX3232EEWE is the closest verified same-package alternative and is appropriate when the additional G1Z ordering distinction is acceptable after temperature, packing, and production-code checks. Related MAX3232CDR and MAX3232EIDR variants require package-dimension and footprint review and should not be assumed to be direct replacements. Select a different transceiver when the interface requires more channels, longer-distance differential signaling, a different package, or a broader temperature range. The MAX3232EEWE+G1Z is best suited to compact point-to-point RS-232 links in industrial controllers, data-acquisition equipment, test instruments, embedded gateways, and legacy peripheral interfaces.

Comparación con alternativas

Parámetro Este producto MAX3232EEWE
Package 16-SOIC 16-SOIC
Brand Analog Devices Analog Devices
Driver and Receiver Count 2/2 2/2
Supply Voltage Range 3.0V to 5.5V 3.0V to 5.5V
Maximum Data Rate 1Mbps 1Mbps
ESD Protection ±15kV ±15kV
Low-Power Supply Current Down to 10nA Down to 10nA
Ordering Code MAX3232EEWE+G1Z MAX3232EEWE

Diferenciadores clave

  • Two complete RS-232 channels in one package (frente a MAX3232EEWE)
  • Broad single-supply operating range (frente a MAX3232EEWE)
  • ESD-protected interface (frente a MAX3232EEWE)

Notas de diseño

Place the charge-pump capacitors immediately beside their associated IC pins, and keep the associated tracks short and free of test-point stubs. Preserve a continuous ground reference beneath and around the interface section. RS-232 traces should be kept away from oscillator, switching-supply, and precision analog nodes because the interface intentionally swings above and below the logic supply rails.

Do not treat every MAX3232 suffix as footprint-compatible. The MAX3232EEWE and MAX3232EEWE+G1Z listing both identify a 16-SOIC configuration, while MAX3232ECDR and MAX3232EIDR identify different orderable package options. Before substitution, compare the package drawing, lead pitch, body width, pin assignment, temperature range, and ordering information rather than relying only on the base family name.

Connect the RS-232 cable return to the equipment ground through the interface reference design, and verify that the host system uses a compatible ground potential. Very long or unbalanced cables can pick up noise and transmit surge events to the connector. Add appropriately rated external protection when the port is exposed to severe industrial transients; the transceiver's ±15kV ESD rating should not be treated as complete surge protection.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The product listing identifies MSL 1 (Unlimited) and tube packaging. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not confirmed.

Datos verificados el: 2026-11-09 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MAX3232EEWE+G1Z datasheet MAX3232EEWE+G1Z pinout MAX3232EEWE+G1Z datasheet pdf MAX3232EEWE+G1Z equivalent MAX3232EEWE+G1Z replacement MAX3232EEWE+G1Z drop-in replacement MAX3232EEWE+G1Z price MAX3232EEWE+G1Z stock Analog Devices MAX3232EEWE+G1Z MAX3232EEWE 16-SOIC pinout MAX3232EEWE vs MAX3232EEWE+G1Z MAX3232EEWE+G1Z RS-232 application circuit

Componentes & términos relacionados

Analog Devices MAX3232EEWE+G1Z MAX3232EEWE MAX3232E RS-232 RS-232 transceiver interface IC line driver line receiver serial interface CMOS logic charge-pump capacitor 3.0V to 5.5V supply 1Mbps data rate ±15kV ESD protection 10nA low-power operation 16-SOIC SOIC package family surface-mount package industrial serial controller data-acquisition equipment test and measurement MSL 1 RoHS REACH
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ