MAX3232EEWE+G1Z - 2/2 RS-232 Transceiver | Analog Devices
料号: MAX3232EEWE+G1Z ✓ 量产中MAX3232EEWE+G1Z 概述
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received RS-232 signals back into logic-compatible signals. The MAX3232EEWE+G1Z belongs to the transceiver class of interface ICs, combining two transmit channels and two receive channels in one package. This integrated arrangement reduces board area and simplifies design of point-to-point serial links, industrial control equipment, data-acquisition systems, and service interfaces.
Key features include a 3.0V to 5.5V supply range, operation at up to 1Mbps, ±15kV ESD protection, and a low-power specification extending down to 10nA. The 2/2 channel arrangement allows two serial links to be implemented with one package. Its true RS-232 implementation is intended for systems whose connected equipment uses unbalanced RS-232 signaling rather than differential RS-485 or RS-422.
The transceiver translates between modern CMOS logic levels and the voltage levels used by RS-232 equipment. Because RS-232 uses positive and negative signal voltages, the interface requires appropriate charge-pump circuitry and external charge-pump capacitors. The Analog Devices datasheet provides the recommended capacitor values, electrical characteristics, timing information, and pin configuration needed to design the interface correctly.
Typical applications include industrial serial controllers, test and measurement equipment, point-of-sale terminals, data loggers, instrument interfaces, and embedded systems communicating with legacy RS-232 peripherals. It is especially useful where two serial channels are required and a protected 16-pin SOIC footprint is preferable to larger transceiver packages.
PCB layout should keep the charge-pump capacitor connections short, provide an uninterrupted ground path, and route RS-232 traces away from sensitive analog and high-speed digital circuits. External protection or filtering may be needed when cables are long, ports are frequently disconnected, or the interface is exposed to severe industrial transients.
This product page combines the manufacturer interface information with practical selection, layout, and replacement guidance. It also distinguishes the verified electrical characteristics from parameters that require confirmation in the MAX3232E datasheet, helping engineers shorten component qualification without overlooking package and ordering-code differences.
直接替换替代料: MAX3232EEWE+G1Z ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
MAX3232EEWE
✅ 直接替换📋 参考替代料(不在目录中)
MAX3232EEWE+G1Z 规格参数
| Product Type | RS-232 transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 1Mbps |
| ESD Protection | ±15kV |
| Low-Power Supply Current | Down to 10nA |
| 封装 | 16-pin SOIC |
| 安装类型 | Surface mount |
| Interface Standard | True RS-232 |
| Moisture Sensitivity Level | MSL 1 (Unlimited) |
| Packaging | Tube |
MAX3232EEWE+G1Z 16-pin soic 引脚配置指南
MAX3232EEWE+G1Z(16-pin soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: MAX3232EEWE+G1Z.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MAX3232EEWE+G1Z 适用于 6 应用s: Industrial Serial Controllers, Data Acquisition Equipment, Test and Measurement Instruments, Point-of-Sale Terminals, Embedded Serial Gateways, Legacy Peripheral Interfaces.
Industrial Serial Controllers
The MAX3232EEWE+G1Z is suitable for industrial controllers that need two isolated-by-interface-direction RS-232 communication channels in a compact surface-mount footprint. Its 3.0V to 5.5V operating range supports common embedded supply voltages, while the two-driver and two-receiver arrangement permits bidirectional links to instruments or service equipment. The ±15kV ESD protection rating adds useful protection for ports exposed to routine handling and cable transients. Designers should still evaluate the enclosure, grounding strategy, cable length, and system surge requirements because the transceiver rating does not replace external surge protection.
Data Acquisition Equipment
The MAX3232EEWE+G1Z can connect a data-acquisition controller to two legacy RS-232 devices while operating from a 3.3V or 5V logic supply. Data rates up to 1Mbps provide sufficient bandwidth for command traffic, configuration exchanges, and moderate data streams. Its 16-pin SOIC package helps keep the interface compact, and the 2/2 channel structure reduces the number of interface ICs required. For laboratory or industrial installations, use a suitable ground reference and place optional line protection close to the connector.
Test and Measurement Instruments
The MAX3232EEWE+G1Z fits test and measurement instruments that expose RS-232 ports for configuration, logging, or legacy instrument control. A 3.0V to 5.5V supply range allows integration with modern control electronics, while operation up to 1Mbps covers common serial-control traffic. The 2/2 channel arrangement can support separate control and diagnostic ports in one 16-pin SOIC package. Because RS-232 is unbalanced and ground-referenced, instrument pairing should be checked for correct signal polarity and a reliable common ground.
Point-of-Sale Terminals
The MAX3232EEWE+G1Z can provide legacy peripheral connectivity in point-of-sale terminals, weighing systems, receipt equipment, and customer displays that use RS-232. The 2/2 channel structure can reduce the number of interface chips in a space-constrained enclosure, and the 16-pin SOIC package supports standard surface-mount assembly. Its low-power specification down to 10nA is useful where equipment spends significant time idle. Final port protection should be selected according to cable length, installation environment, and the frequency of hot-plugging.
Embedded Serial Gateways
The MAX3232EEWE+G1Z is appropriate for embedded serial gateways that translate or monitor RS-232 equipment through a modern controller. Two drivers and two receivers allow the gateway to manage more than one RS-232 port, while the 3.0V to 5.5V range supports common embedded rails. Operation up to 1Mbps is suitable for many telemetry and control protocols. Keep the charge-pump network close to the device and maintain a low-impedance ground path to avoid signal-integrity issues on longer cables.
Legacy Peripheral Interfaces
The MAX3232EEWE+G1Z provides a practical bridge between modern CMOS-based electronics and legacy RS-232 peripherals. It can be used in service equipment, programmable controllers, communication modules, and diagnostic tools where the peripheral exposes only a serial port. The 16-pin SOIC package simplifies board integration, and ±15kV ESD protection improves robustness at accessible connectors. System designers must confirm logic thresholds, direction control, capacitor selection, and the RS-232 driver load limitations for the connected equipment.
工程参考数据: MAX3232EEWE+G1Z ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MAX3232EEWE |
|---|---|---|
| Package | 16-SOIC | 16-SOIC |
| Brand | Analog Devices | Analog Devices |
| Driver and Receiver Count | 2/2 | 2/2 |
| Supply Voltage Range | 3.0V to 5.5V | 3.0V to 5.5V |
| Maximum Data Rate | 1Mbps | 1Mbps |
| ESD Protection | ±15kV | ±15kV |
| Low-Power Supply Current | Down to 10nA | Down to 10nA |
| Ordering Code | MAX3232EEWE+G1Z | MAX3232EEWE |
关键差异点
- Two complete RS-232 channels in one package (对比 MAX3232EEWE)
- Broad single-supply operating range (对比 MAX3232EEWE)
- ESD-protected interface (对比 MAX3232EEWE)
设计说明
Place the charge-pump capacitors immediately beside their associated IC pins, and keep the associated tracks short and free of test-point stubs. Preserve a continuous ground reference beneath and around the interface section. RS-232 traces should be kept away from oscillator, switching-supply, and precision analog nodes because the interface intentionally swings above and below the logic supply rails.
Do not treat every MAX3232 suffix as footprint-compatible. The MAX3232EEWE and MAX3232EEWE+G1Z listing both identify a 16-SOIC configuration, while MAX3232ECDR and MAX3232EIDR identify different orderable package options. Before substitution, compare the package drawing, lead pitch, body width, pin assignment, temperature range, and ordering information rather than relying only on the base family name.
Connect the RS-232 cable return to the equipment ground through the interface reference design, and verify that the host system uses a compatible ground potential. Very long or unbalanced cables can pick up noise and transmit surge events to the connector. Add appropriately rated external protection when the port is exposed to severe industrial transients; the transceiver's ±15kV ESD rating should not be treated as complete surge protection.
合规信息
The product listing identifies MSL 1 (Unlimited) and tube packaging. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not confirmed.