Texas Instruments

MAX3243IDBG4 - 3/5 RS-232 Transceiver | Texas Instruments

N.º de pieza: MAX3243IDBG4 ✓ Activo
3 V to 5.5 V Vdss 1 µA Id 28-SSOP Package
MOQ: 1 |

MAX3243IDBG4 Descripción general

The Texas Instruments MAX3243IDBG4 is a 3-driver and 5-receiver RS-232 transceiver designed for 3 V to 5.5 V operation. It supports RS-232 and CMOS interfacing, provides ±15 kV human-body-model ESD protection, and is packaged in a 28-pin SSOP with a 5.30 mm body width. The device is intended for industrial-temperature RS-232 links operating from 0°C to 70°C.

An RS-232 transceiver is an interface IC that converts between CMOS logic levels and balanced, single-ended RS-232 signals. It combines line drivers, receivers, and charge-pump support circuitry into one package. Within the interface hierarchy, the MAX3243IDBG4 belongs to the RS-232 transceiver class, connecting low-voltage digital controllers to external serial ports through the EIA RS-232 electrical standard.

Key features include three RS-232 drivers, five RS-232 receivers, a 3 V to 5.5 V supply range, and ±15 kV HBM ESD protection. The MAX3243 family also includes AutoShutdown functionality, allowing very low supply current when no valid signal is detected. These characteristics suit equipment requiring multiple serial channels, such as industrial controllers, test systems, point-of-sale equipment, and legacy peripheral interfaces.

The device uses Maxim's low-power RS-232 interface approach and operates from both 3.3 V and 5 V system rails. The MAX3243IDBG4 industrial suffix identifies the specified temperature range, while the DBG package code identifies the 28-pin SSOP configuration. Its multi-channel arrangement allows one logic device to connect multiple external RS-232 ports while limiting the number of separate transceiver packages required on the PCB.

Typical applications include industrial serial-port expansion, programmable logic controller communications, laboratory data-acquisition equipment, point-of-sale systems, and embedded systems that need to communicate with legacy RS-232 peripherals. The three-driver arrangement is useful when several external devices must receive commands, while the five receivers allow multiple incoming serial signals to be monitored simultaneously.

PCB design should preserve the capacitance limits and connection details required by the RS-232 interface while providing suitable decoupling close to the supply pins. Cable-side protection must also account for electrostatic discharge; the IC's ±15 kV HBM rating protects the device pins when used in the application configuration described by the manufacturer, but it does not replace correct grounding, shielding, or cable design.

This product page combines the exact ordering information, electrical characteristics, package details, interface role, application guidance, and verified substitution constraints for the MAX3243IDBG4. It also distinguishes genuine same-footprint drop-in choices from cross-package or merely functional equivalents, helping engineers avoid a PCB redesign when replacing the device.

Alternativas directas para MAX3243IDBG4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

MAX3243EIDBG4

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 28-SSOP
Same 28-SSOP footprint and 3/5 RS-232 channel arrangement; the E ordering variant changes the family-specific device characteristics that must be checked in the datasheet.

📋 Alternativa de referencia (no en el catálogo)

MAX3243IDBG4 Especificaciones

Device Type RS-232 transceiver
Number of Drivers 3
Number of Receivers 5
Supply Voltage Range 3 V to 5.5 V
Interface Technology RS-232 and CMOS
Protocol RS-232
ESD Protection ±15 kV HBM
Rango de temperatura de funcionamiento 0°C to 70°C
Encapsulado 28-SSOP
Package Body Width 5.30 mm
Número de pines 28
Tipo de montaje Surface mount
AutoShutdown Supply Current 1 µA
Supply Current Configuration 3.3 V or 5 V

Guía de configuración de pines de MAX3243IDBG4 5.30 mm

Configuración de pines para MAX3243IDBG4 (encapsulado 5.30 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 5.30 mm para MAX3243IDBG4

No hay datos detallados de patillaje disponibles para MAX3243IDBG4.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MAX3243IDBG4 es adecuado para 6 aplicacións: Industrial serial-port expansion, Programmable logic controller communications, Laboratory data-acquisition systems, Point-of-sale and retail peripherals, Embedded system legacy-port adapters, Instrumentation and service interfaces.

🏭

Industrial serial-port expansion

The MAX3243IDBG4 fits industrial controllers that need more RS-232 channels than a one-driver, one-receiver interface provides. Its three drivers can serve outgoing command paths, while five receivers can monitor separate incoming signals without requiring five transceiver packages. Operating from 3 V to 5.5 V allows deployment in both 3.3 V embedded systems and 5 V legacy control equipment. The specified 0°C to 70°C range suits controlled industrial enclosures. The ±15 kV HBM bus protection rating adds useful robustness at connector-adjacent pins, although proper cable grounding and shielding remain necessary.

⚡

Programmable logic controller communications

The MAX3243IDBG4 is appropriate for a programmable logic controller or embedded controller that communicates with legacy RS-232 equipment. Three driver channels allow commands to be distributed to multiple peripheral ports, and five receiver channels support monitoring of several incoming devices. Its 3 V to 5.5 V range makes it practical for mixed-voltage controller boards, while AutoShutdown can reduce consumption when connected equipment presents no valid signal. Keep the controller interface traces short and separate them from the cable-side driver outputs to prevent serial-edge energy from coupling into sensitive digital logic.

🔧

Laboratory data-acquisition systems

The MAX3243IDBG4 can support laboratory and test-system fixtures that must connect several legacy RS-232 instruments to a modern controller. Three transmit channels can carry commands or configuration data, and five receive channels can collect status information from multiple devices. The interface operates from a 3.3 V or 5 V rail, making it useful beside modern test controllers, and its 28-pin SSOP package preserves board area. For reliable measurements, use a common equipment ground, control cable routing, and apply the charge-pump and bypass capacitors exactly as shown in the manufacturer interface circuit.

🖥️

Point-of-sale and retail peripherals

The MAX3243IDBG4 is useful in point-of-sale equipment that must retain compatibility with scanners, printers, scales, or other legacy serial peripherals. A three-driver, five-receiver configuration reduces the number of interface packages required when several peripherals share a controller. The 3 V to 5.5 V operating range supports mixed embedded and legacy logic rails, while AutoShutdown helps limit power use when no peripheral asserts a valid signal. ESD protection at the bus pins improves interface robustness, but external connectors should still be selected and installed for the expected cable and ESD environment.

🧩

Embedded system legacy-port adapters

The MAX3243IDBG4 is a practical choice for embedded adapters that bridge a modern processor or microcontroller to legacy RS-232 equipment. Three output channels support command or control links, while five input channels support status, acknowledgement, and monitoring signals. Because the device accepts a 3.3 V supply as well as a 5 V supply, the interface can operate beside either CMOS logic rail. The narrow 28-SSOP package helps conserve board area, but the PCB footprint and pin numbering must match the DBG variant exactly rather than another MAX3243 package.

📡

Instrumentation and service interfaces

The MAX3243IDBG4 supports instrumentation equipment that needs several RS-232 service ports while conserving PCB area. Its three drivers can communicate with separate devices, and five receivers can consolidate status and diagnostic signals. The 3 V to 5.5 V supply range supports both control-logic generations, and the specified 0°C to 70°C range fits many indoor instrument enclosures. The ±15 kV HBM rating adds protection for exposed bus pins, while AutoShutdown limits supply current when no valid signal is present on the connected interface.

What is the MAX3243IDBG4?
The MAX3243IDBG4 is a 3-driver, 5-receiver RS-232 transceiver operating from 3 V to 5.5 V. It combines RS-232 line drivers and receivers with ±15 kV HBM ESD protection in a 28-pin SSOP package. Texas Instruments specifies the MAX3243IDBG4 for 0°C to 70°C operation, making it suitable for industrial-temperature equipment that requires multiple RS-232 channels.
What is the supply voltage of MAX3243IDBG4?
The MAX3243IDBG4 operates from 3 V to 5.5 V and can be used with either 3.3 V or 5 V logic systems. According to the MAX3243 family description, the interface combines CMOS-compatible logic with RS-232 driver and receiver functions. Place the required bypass capacitor close to the supply pins and avoid excessive input capacitance or long unterminated logic traces.
How many RS-232 drivers and receivers does MAX3243IDBG4 have?
The MAX3243IDBG4 provides three RS-232 drivers and five RS-232 receivers. The three drivers are useful for transmitting commands to external equipment, while the five receivers support five incoming RS-232 signals. This 3/5 arrangement allows a single package to consolidate more interface channels than a conventional one-driver, one-receiver transceiver.
Where can I download the MAX3243IDBG4 datasheet PDF?
The MAX3243IDBG4 datasheet PDF is available from Texas Instruments and through the product document listed on this page. The document describes the 3 V to 5.5 V supply range, three drivers, five receivers, AutoShutdown behavior, ESD rating, pin functions, and typical RS-232 interface circuits. Use the document's pin-description table when assigning tracks on a new PCB.
Where can I find the MAX3243IDBG4 pinout?
The MAX3243IDBG4 pin assignment is defined in the manufacturer's MAX3243 datasheet under the 28-SSOP pin-description table and package drawing. The interface uses a 28-pin SSOP, so PCB land patterns must be based on that exact package rather than the narrower SOIC or wide-SOIC variants used by other MAX3243 ordering codes. Verify the exposed connections and charge-pump capacitor values before release to manufacturing.
What ESD protection does MAX3243IDBG4 provide?
The MAX3243IDBG4 provides ±15 kV ESD protection using the human-body model. According to Texas Instruments' MAX3243 family documentation, the rating applies to the bus pins in the specified application configuration. The rating protects the interface IC but does not eliminate the need for an appropriate cable shield, solid equipment grounding, or correctly selected external surge protection.
Is MAX3243IDBG4 suitable for an industrial control system?
The MAX3243IDBG4 is suitable for industrial-control interfaces when the enclosure remains within its specified 0°C to 70°C ambient range. Its 3 V to 5.5 V supply range, three drivers, five receivers, and ±15 kV HBM ESD protection suit compact serial-port expansion. For wider temperature ranges or stricter automotive qualification, select a variant explicitly rated for those environmental conditions.
What can replace MAX3243IDBG4?
A replacement for the MAX3243IDBG4 must use the same 28-pin SSOP footprint and preserve the three-driver, five-receiver arrangement. MAX3243EIDBG4 is the closest same-package family alternative identified, while other MAX3243 ordering codes use different packages and are not drop-in replacements. Confirm signal levels, enable logic, AutoShutdown behavior, charge-pump capacitors, and temperature grade before substitution.
Is MAX3243IDBG4 the same as MAX3243EIDBG4?
MAX3243IDBG4 and MAX3243EIDBG4 belong to the same MAX3243 family and use the same 28-pin SSOP package, but the E suffix identifies a different ordering variant. The electrical details that distinguish the E version must be checked in the manufacturer datasheet before substitution. Mechanical compatibility alone does not establish that every operating limit and protection specification is identical.
When should I choose MAX3243IDBG4 over another RS-232 transceiver?
Choose the MAX3243IDBG4 when a design needs three RS-232 drivers and five receivers, operation from a 3 V to 5.5 V rail, and a 28-pin SSOP footprint. It is particularly useful for multi-port embedded and industrial equipment requiring auto-shutdown behavior and ±15 kV HBM protection. A single-channel transceiver may be simpler when only one RS-232 port is required.
MAX3243IDBG4 vs MAX3243EIDBG4 - which is the better drop-in choice?
MAX3243EIDBG4 is the stronger replacement candidate when the PCB uses the 28-pin SSOP footprint because it preserves the MAX3243 family pin arrangement and 3-driver, 5-receiver function. MAX3243IDBG4 remains the appropriate choice when its exact qualification, protection, and ordering characteristics meet the product specification. Compare the manufacturer ordering table and environmental limits before approving either device.
How do you power and decouple MAX3243IDBG4?
Power the MAX3243IDBG4 from a stable 3 V to 5.5 V rail and connect the charge-pump capacitors to the pins identified in the manufacturer datasheet. Place the required bypass capacitor and the two charge-pump capacitors close to their associated pins, with short ground returns. Keep sensitive logic routing away from cable-side driver outputs to reduce coupling into receiver and logic circuits.
Does MAX3243IDBG4 include AutoShutdown?
Yes, the MAX3243 family includes AutoShutdown functionality, with the manufacturer description specifying a supply current of 1 µA when no valid signal level is detected. This behavior is useful in equipment that must reduce power consumption during idle periods. The exact enable and shutdown timing should be verified from the MAX3243 datasheet for the selected operating conditions.
What is the package and pin count of MAX3243IDBG4?
The MAX3243IDBG4 is supplied in a 28-SSOP package with a listed body width of 5.30 mm and 28 pins. The DBG ordering suffix corresponds to this narrow SSOP configuration. A PCB footprint for a 28-pin SOIC or wide-SOIC cannot be assumed compatible without checking the mechanical drawing, lead pitch, and pin numbering.
Where can I buy MAX3243IDBG4 and check its lead time?
Use the Request a Quote form on this page to request current availability, price, lead time, and minimum-order information for the MAX3243IDBG4. The orderable device is specified as the Texas Instruments 28-SSOP RS-232 transceiver, and one listing shows 7,760 pieces in stock, but stock and timing can change. Confirm the exact suffix and packaging requirements with the quote response.

Datos de referencia de ingeniería para MAX3243IDBG4 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MAX3243IDBG4 when a board requires three RS-232 drivers, five receivers, a 28-SSOP footprint, operation from 3 V to 5.5 V, and a 0°C to 70°C ambient range. Its three-driver and five-receiver arrangement is more useful than a one-channel transceiver when several legacy peripherals must be connected or monitored. MAX3243EIDBG4 is the practical same-footprint family candidate when its detailed electrical and qualification characteristics satisfy the design. Do not select MAX3243IDW, MAX3243EIDWRG4, or other MAX3243 variants as direct PCB replacements because their packages and footprints differ. For systems requiring wider temperature operation, a different grade, or another protection level, choose a part explicitly specified for those requirements rather than assuming that all members of the MAX3243 family are interchangeable.

Comparación con alternativas

Parámetro Este producto MAX3243EIDBG4
Package 28-SSOP 28-SSOP
Brand Texas Instruments Texas Instruments
Device Type RS-232 transceiver RS-232 transceiver
Number of Drivers 3 3
Number of Receivers 5 5
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V

Diferenciadores clave

  • Combines three transmitters and five receivers in one package (frente a MAX3243EIDBG4)
  • Supports both modern and legacy logic supply levels (frente a MAX3243EIDBG4)
  • Provides documented human-body-model bus protection (frente a MAX3243EIDBG4)

Notas de diseño

Place the bypass capacitor and the two charge-pump capacitors directly beside the MAX3243IDBG4 pins identified in the manufacturer datasheet. Use short traces and a low-impedance ground return so switching current from the charge-pump circuitry does not share a noisy path with receiver or logic-ground currents. Confirm the DBG footprint mechanically because other MAX3243 options use different package widths and pin assignments.

Do not substitute a MAX3243 ordering code solely because it has the same 3/5 channel count. The package, lead pitch, enable behavior, AutoShutdown implementation, ESD rating, temperature range, and charge-pump capacitor values must all match the original design. MAX3243EIDBG4 is a same-package family candidate, but its datasheet must be checked before production substitution.

Route the three RS-232 driver outputs away from receiver inputs, references, clocks, and sensitive logic nets. Connect the cable shield and equipment grounds according to the installation architecture rather than allowing signal return current to flow through digital ground traces. The ±15 kV HBM specification protects the IC under its defined test conditions, but it does not replace connector selection, cable design, or chassis grounding.

Decouple the 3 V to 5.5 V supply close to the device and keep the AutoShutdown behavior compatible with the surrounding system. If firmware periodically disables or wakes the transceiver, verify that the receiver outputs cannot produce unwanted bus transitions during startup. Also avoid placing the interface supply return through long or shared connector-current paths that could disturb the logic reference.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The device is an industrial-temperature RS-232 transceiver, not an automotive-qualified part. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established by the cited product records.

Búsquedas relacionadas

MAX3243IDBG4 datasheet MAX3243IDBG4 pinout MAX3243IDBG4 datasheet pdf MAX3243IDBG4 specifications MAX3243IDBG4 28-SSOP MAX3243IDBG4 3.3V 5.5V MAX3243IDBG4 ESD protection MAX3243IDBG4 RS-232 transceiver MAX3243IDBG4 equivalent MAX3243IDBG4 replacement MAX3243IDBG4 vs MAX3243EIDBG4 MAX3243IDBG4 price MAX3243IDBG4 stock Texas Instruments MAX3243IDBG4 MAX3243IDBG4 industrial control

Componentes & términos relacionados

Texas Instruments MAX3243IDBG4 MAX3243EIDBG4 MAX3243IDW MAX3243EIDWRG4 RS-232 RS-232 transceiver line driver line receiver interface IC CMOS semiconductor 28-SSOP SSOP package family surface mount 3 V to 5.5 V supply ±15 kV HBM ESD protection AutoShutdown 1 µA supply current industrial control laboratory data acquisition point-of-sale equipment legacy serial port charge-pump capacitor
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ