MAX3243IDBG4 - 3/5 RS-232 Transceiver | Texas Instruments
MPN: MAX3243IDBG4 ✓ نشطMAX3243IDBG4 نظرة عامة
An RS-232 transceiver is an interface IC that converts between CMOS logic levels and balanced, single-ended RS-232 signals. It combines line drivers, receivers, and charge-pump support circuitry into one package. Within the interface hierarchy, the MAX3243IDBG4 belongs to the RS-232 transceiver class, connecting low-voltage digital controllers to external serial ports through the EIA RS-232 electrical standard.
Key features include three RS-232 drivers, five RS-232 receivers, a 3 V to 5.5 V supply range, and ±15 kV HBM ESD protection. The MAX3243 family also includes AutoShutdown functionality, allowing very low supply current when no valid signal is detected. These characteristics suit equipment requiring multiple serial channels, such as industrial controllers, test systems, point-of-sale equipment, and legacy peripheral interfaces.
The device uses Maxim's low-power RS-232 interface approach and operates from both 3.3 V and 5 V system rails. The MAX3243IDBG4 industrial suffix identifies the specified temperature range, while the DBG package code identifies the 28-pin SSOP configuration. Its multi-channel arrangement allows one logic device to connect multiple external RS-232 ports while limiting the number of separate transceiver packages required on the PCB.
Typical applications include industrial serial-port expansion, programmable logic controller communications, laboratory data-acquisition equipment, point-of-sale systems, and embedded systems that need to communicate with legacy RS-232 peripherals. The three-driver arrangement is useful when several external devices must receive commands, while the five receivers allow multiple incoming serial signals to be monitored simultaneously.
PCB design should preserve the capacitance limits and connection details required by the RS-232 interface while providing suitable decoupling close to the supply pins. Cable-side protection must also account for electrostatic discharge; the IC's ±15 kV HBM rating protects the device pins when used in the application configuration described by the manufacturer, but it does not replace correct grounding, shielding, or cable design.
This product page combines the exact ordering information, electrical characteristics, package details, interface role, application guidance, and verified substitution constraints for the MAX3243IDBG4. It also distinguishes genuine same-footprint drop-in choices from cross-package or merely functional equivalents, helping engineers avoid a PCB redesign when replacing the device.
بدائل مباشرة لـ MAX3243IDBG4 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
MAX3243EIDBG4
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
MAX3243IDBG4 المواصفات
| Device Type | RS-232 transceiver |
| Number of Drivers | 3 |
| Number of Receivers | 5 |
| Supply Voltage Range | 3 V to 5.5 V |
| Interface Technology | RS-232 and CMOS |
| Protocol | RS-232 |
| ESD Protection | ±15 kV HBM |
| نطاق درجة حرارة التشغيل | 0°C to 70°C |
| العلبة | 28-SSOP |
| Package Body Width | 5.30 mm |
| عدد الدبابيس | 28 |
| نوع التركيب | Surface mount |
| AutoShutdown Supply Current | 1 µA |
| Supply Current Configuration | 3.3 V or 5 V |
دليل تكوين أطراف MAX3243IDBG4 5.30 mm
تكوين الأطراف لـ MAX3243IDBG4 (حزمة 5.30 mm). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MAX3243IDBG4.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MAX3243IDBG4 مناسب لـ 6 التطبيقs: Industrial serial-port expansion, Programmable logic controller communications, Laboratory data-acquisition systems, Point-of-sale and retail peripherals, Embedded system legacy-port adapters, Instrumentation and service interfaces.
Industrial serial-port expansion
The MAX3243IDBG4 fits industrial controllers that need more RS-232 channels than a one-driver, one-receiver interface provides. Its three drivers can serve outgoing command paths, while five receivers can monitor separate incoming signals without requiring five transceiver packages. Operating from 3 V to 5.5 V allows deployment in both 3.3 V embedded systems and 5 V legacy control equipment. The specified 0°C to 70°C range suits controlled industrial enclosures. The ±15 kV HBM bus protection rating adds useful robustness at connector-adjacent pins, although proper cable grounding and shielding remain necessary.
موصى به
Programmable logic controller communications
The MAX3243IDBG4 is appropriate for a programmable logic controller or embedded controller that communicates with legacy RS-232 equipment. Three driver channels allow commands to be distributed to multiple peripheral ports, and five receiver channels support monitoring of several incoming devices. Its 3 V to 5.5 V range makes it practical for mixed-voltage controller boards, while AutoShutdown can reduce consumption when connected equipment presents no valid signal. Keep the controller interface traces short and separate them from the cable-side driver outputs to prevent serial-edge energy from coupling into sensitive digital logic.
موصى به
Laboratory data-acquisition systems
The MAX3243IDBG4 can support laboratory and test-system fixtures that must connect several legacy RS-232 instruments to a modern controller. Three transmit channels can carry commands or configuration data, and five receive channels can collect status information from multiple devices. The interface operates from a 3.3 V or 5 V rail, making it useful beside modern test controllers, and its 28-pin SSOP package preserves board area. For reliable measurements, use a common equipment ground, control cable routing, and apply the charge-pump and bypass capacitors exactly as shown in the manufacturer interface circuit.
موصى به
Point-of-sale and retail peripherals
The MAX3243IDBG4 is useful in point-of-sale equipment that must retain compatibility with scanners, printers, scales, or other legacy serial peripherals. A three-driver, five-receiver configuration reduces the number of interface packages required when several peripherals share a controller. The 3 V to 5.5 V operating range supports mixed embedded and legacy logic rails, while AutoShutdown helps limit power use when no peripheral asserts a valid signal. ESD protection at the bus pins improves interface robustness, but external connectors should still be selected and installed for the expected cable and ESD environment.
موصى به
Embedded system legacy-port adapters
The MAX3243IDBG4 is a practical choice for embedded adapters that bridge a modern processor or microcontroller to legacy RS-232 equipment. Three output channels support command or control links, while five input channels support status, acknowledgement, and monitoring signals. Because the device accepts a 3.3 V supply as well as a 5 V supply, the interface can operate beside either CMOS logic rail. The narrow 28-SSOP package helps conserve board area, but the PCB footprint and pin numbering must match the DBG variant exactly rather than another MAX3243 package.
موصى به
Instrumentation and service interfaces
The MAX3243IDBG4 supports instrumentation equipment that needs several RS-232 service ports while conserving PCB area. Its three drivers can communicate with separate devices, and five receivers can consolidate status and diagnostic signals. The 3 V to 5.5 V supply range supports both control-logic generations, and the specified 0°C to 70°C range fits many indoor instrument enclosures. The ±15 kV HBM rating adds protection for exposed bus pins, while AutoShutdown limits supply current when no valid signal is present on the connected interface.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MAX3243IDBG4 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | MAX3243EIDBG4 |
|---|---|---|
| Package | 28-SSOP | 28-SSOP |
| Brand | Texas Instruments | Texas Instruments |
| Device Type | RS-232 transceiver | RS-232 transceiver |
| Number of Drivers | 3 | 3 |
| Number of Receivers | 5 | 5 |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
أبرز الفروقات
- Combines three transmitters and five receivers in one package (مقابلMAX3243EIDBG4)
- Supports both modern and legacy logic supply levels (مقابلMAX3243EIDBG4)
- Provides documented human-body-model bus protection (مقابلMAX3243EIDBG4)
ملاحظات التصميم
Place the bypass capacitor and the two charge-pump capacitors directly beside the MAX3243IDBG4 pins identified in the manufacturer datasheet. Use short traces and a low-impedance ground return so switching current from the charge-pump circuitry does not share a noisy path with receiver or logic-ground currents. Confirm the DBG footprint mechanically because other MAX3243 options use different package widths and pin assignments.
Do not substitute a MAX3243 ordering code solely because it has the same 3/5 channel count. The package, lead pitch, enable behavior, AutoShutdown implementation, ESD rating, temperature range, and charge-pump capacitor values must all match the original design. MAX3243EIDBG4 is a same-package family candidate, but its datasheet must be checked before production substitution.
Route the three RS-232 driver outputs away from receiver inputs, references, clocks, and sensitive logic nets. Connect the cable shield and equipment grounds according to the installation architecture rather than allowing signal return current to flow through digital ground traces. The ±15 kV HBM specification protects the IC under its defined test conditions, but it does not replace connector selection, cable design, or chassis grounding.
Decouple the 3 V to 5.5 V supply close to the device and keep the AutoShutdown behavior compatible with the surrounding system. If firmware periodically disables or wakes the transceiver, verify that the receiver outputs cannot produce unwanted bus transitions during startup. Also avoid placing the interface supply return through long or shared connector-current paths that could disturb the logic reference.
معلومات الامتثال
The device is an industrial-temperature RS-232 transceiver, not an automotive-qualified part. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established by the cited product records.