onsemi

MC1488MEL - Quad EIA-232D Driver | onsemi

N.º de pieza: MC1488MEL ✓ Activo
±15 V Vdss ±10 mA typical Id SOEIAJ-14, 14-pin surface-mount package Package
MOQ: 1 |

MC1488MEL Descripción general

The onsemi MC1488MEL is a monolithic quad line driver designed to interface data terminal equipment with data communications equipment in accordance with EIA-232D requirements. The device provides four independent driver channels and is specified for operation with ±15 V supply voltages. It is packaged in the onsemi SOEIAJ-14, a 14-pin small-outline surface-mount package with a 5.30 mm package width.

A line driver is an interface IC that converts low-voltage logic signals into differential, bipolar RS-232-style voltage levels for transmission over a serial communication link. In the broader hierarchy, the MC1488MEL belongs to the RS-232 driver and receiver family, within interface ICs and data-communication semiconductors. Its four channels allow one package to support multiple unidirectional serial lines, reducing board area compared with separate single-channel drivers.

The principal feature of the MC1488MEL is its quad EIA-232D line-driver architecture. The manufacturer describes the MC1488 as a monolithic quad line driver with current-limited outputs and an operating supply arrangement of approximately ±15 V. This architecture is useful when a system needs to translate TTL or CMOS-side control signals into the voltage levels expected by an RS-232 interface, particularly where multiple unidirectional channels are required.

The MC1488MEL is specified for commercial-extended temperature-grade applications. Its 14-terminal surface-mount construction is intended for automated PCB assembly and compact equipment designs. The package is identified as SOEIAJ-14 rather than a generic 14-pin SOIC designation, so engineers should use the manufacturer pin configuration and land pattern associated with that specific package when laying out a replacement board.

Typical uses include industrial control equipment, data-terminal interfaces, RS-232 communication ports, peripheral connections, and legacy serial-control systems. Because it is a driver rather than a combined transceiver, the application must provide a separate receiver when a complete bidirectional RS-232 port is required. Review signal polarity, supply sequencing, cable routing, and grounding before using the device in a new design.

For power planning, use the datasheet’s absolute-maximum and recommended operating conditions rather than assuming that ±15 V is the only acceptable implementation. The device’s output stage is intended for current-limited RS-232 driver operation, but the PCB still needs appropriate supply decoupling and controlled return paths. This page focuses on the MC1488MEL’s function, package, interface role, and replacement considerations.

Alternativas directas para MC1488MEL — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MC1488MEL (mismo factor de forma y huella).

MC1488MELG

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 SOEIAJ-14
Pb-free (RoHS) suffix of the identical SOEIAJ-14 quad EIA-232D driver; same die, same pinout, identical ±10 mA current-limited outputs

📋 Alternativa de referencia (no en el catálogo)

SN75C188D

✅ Sustitución directa
📦 SOIC-14
quad EIA-232D driver, same 14-pin function map; SOIC-14 body 3.9 mm vs SOEIAJ-14 5.3 mm body width requires footprint check

📋 Alternativa de referencia (no en el catálogo)

DS14C88M/NOPB

✅ Sustitución directa
📦 SOIC-14
manufacturer-documented pin-for-pin compatible to DS1488/MC1488 quad driver; SOIC-14 body width differs from SOEIAJ-14

📋 Alternativa de referencia (no en el catálogo)

MC1488M

✅ Sustitución directa ⚠️ Especificaciones sin verificar
onsemi
📦 SOIC-14
Quad line EIA-232D driver · 4 channels · 0 channels · EIA-232D · ±10 mA typical · 300 Ω minimum · 14-pin SOIC · EIAJ-14

Consulte el precio

Ver hoja de datos →

MC1488MEL Especificaciones

Product Type Quad line driver
Driver Configuration 4 independent driver channels
Interface Standard EIA-232D
Tensión de alimentación ±15 V
Encapsulado SOEIAJ-14, 14-pin surface-mount package
Package Width 5.30 mm
Tipo de montaje Surface mount
Number of Terminals 14
Temperature Grade Commercial extended
Output Current ±10 mA typical
Data Terminal Equipment Interface RS-232 / EIA-232D
Number of Drivers 4
Termination Style Gull wing
Package Shape Rectangular

Guía de configuración de pines de MC1488MEL rectangular

Configuración de pines para MC1488MEL (encapsulado rectangular). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado rectangular para MC1488MEL

No hay datos detallados de patillaje disponibles para MC1488MEL.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MC1488MEL es adecuado para 6 aplicacións: Industrial RS-232 Control Ports, Data-Terminal Equipment Interfaces, Peripheral Serial Links, Legacy Communication Equipment, Instrumentation and Test Systems, Multi-Channel Point-to-Point Communication.

🏭

Industrial RS-232 Control Ports

The MC1488MEL fits industrial equipment that must transmit several unidirectional RS-232 control or status signals from a controller to a peripheral. Its four independent driver channels implement the EIA-232D transmitter side while operating from approximately ±15 V supplies. This integration reduces the number of separate single-channel driver packages and preserves a clear separation between logic-side signals and cable-side outputs. The design must still provide a receiver when the controller needs return data. Confirm logic thresholds, cable protection requirements, and grounding in the final interface circuit.

🖥️

Data-Terminal Equipment Interfaces

The MC1488MEL is suitable for legacy data-terminal equipment that requires multiple RS-232 transmit paths from one logic interface. The quad arrangement allows four independent outputs to be routed toward a DCE or peripheral connection while the monolithic EIA-232D driver handles the required voltage conversion. Because the MC1488MEL provides no receive function, the system needs separate receiver channels for incoming data. Review the manufacturer’s typical application circuit for supply bypassing and output connections, and verify that every external cable reaches the board through suitable protection.

🔧

Peripheral Serial Links

The MC1488MEL can provide the transmitter circuitry for a multi-channel peripheral serial link when the host uses TTL or CMOS control signals and the peripheral expects RS-232 levels. Four channels allow command, status, handshake, and auxiliary signals to share a common driver IC when they are all unidirectional. The key design consideration is avoiding contention: outputs must remain associated with the intended transmit direction, and any receive-only signals need a separate receiver. The ±15 V supply architecture and current-limited output stage match the classic EIA-232D driver role.

🌐

Legacy Communication Equipment

The MC1488MEL is appropriate for maintaining or redesigning legacy EIA-232D communication equipment that requires four dedicated transmit outputs. Its monolithic quad-driver construction simplifies channel allocation and reduces package count compared with four separate single-channel drivers. The device is specified with ±15 V supply operation, so the surrounding system must generate or distribute the required bipolar rails and maintain a low-impedance ground reference. Engineers should also account for connector-level transient protection and ensure that the chosen receiver has compatible thresholds for the incoming data path.

📺

Instrumentation and Test Systems

The MC1488MEL can support unidirectional command channels in instrumentation and test systems that use RS-232 as an external control interface. Four driver channels provide a practical way to route separate commands or status outputs without multiplying the number of line-driver packages. The device does not replace the receiver front end or provide modem signaling, so a complete instrument interface must include appropriate receive circuitry. Validate the system’s ±15 V rail tolerance, ground-noise behavior, and connector protection before connecting the board to external equipment.

⚡

Multi-Channel Point-to-Point Communication

The MC1488MEL suits point-to-point systems that need several dedicated EIA-232D transmit paths between a controller and remote equipment. Its four independent channels can carry separate commands, acknowledgements, or supervisory outputs when the link architecture assigns each signal a fixed direction. The package reduces board area and simplifies supply distribution compared with four discrete single-channel drivers. Application engineering must verify the receiver arrangement, signal polarity, cable length, and protection network, since the MC1488MEL supplies only the transmit function and does not accept data from the remote endpoint.

What is the MC1488MEL?
The onsemi MC1488MEL is a monolithic quad EIA-232D line driver with four independent driver channels. According to the onsemi MC1488 datasheet, it is designed to interface data terminal equipment with data communications equipment. The device is offered in the SOEIAJ-14 surface-mount package and is intended for unidirectional RS-232 driver functions.
What is the operating voltage of the MC1488MEL?
The MC1488MEL is specified for operation with approximately ±15 V supply voltages. The onsemi MC1488 datasheet identifies the part as a quad EIA-232D driver using bipolar supplies. Because RS-232 drivers can be exposed to transient voltage conditions, the complete recommended operating conditions and absolute-maximum limits should be checked before finalizing a power-supply design.
Where can I download the MC1488MEL datasheet PDF?
The manufacturer datasheet is available from onsemi at the official MC1488 datasheet link on this page. The document describes the quad line-driver architecture, EIA-232D interface function, supply arrangement, output characteristics, and ordering information for the MC1488 family, including the MC1488MEL ordering designation. Use the manufacturer PDF as the controlling document for pin functions and electrical limits.
What is the MC1488MEL package and pin count?
The MC1488MEL is supplied in the onsemi SOEIAJ-14 package, which is a 14-terminal surface-mount package. The package is described as a 14-SOIC variant with a 5.30 mm width and gull-wing leads. The public product listing confirms the 14-terminal count; use the MC1488 datasheet pin description table when assigning individual signals to a PCB layout.
Where can I find the MC1488MEL pinout?
The MC1488MEL pinout is located in the pin-configuration and pin-description section of the onsemi MC1488 datasheet. The component uses a 14-terminal SOEIAJ-14 package, but the package name alone does not guarantee the function of every terminal. Assign the four driver inputs, four driver outputs, supply terminals, and ground connections by following the datasheet drawing for the MC1488MEL.
How many RS-232 driver channels does the MC1488MEL provide?
The MC1488MEL provides four independent RS-232 driver channels in one package. The onsemi MC1488 datasheet identifies the device as a monolithic quad line driver. This arrangement is useful for systems carrying several unidirectional serial signals, while a separate receiver device is still needed to support bidirectional data flow.
Is the MC1488MEL suitable for RS-232 communication?
The MC1488MEL is suitable for the transmitter side of EIA-232D communication because it is a dedicated quad line driver. Its ±15 V supply arrangement and current-limited outputs match the classic RS-232 driver application described by onsemi. It does not include receiver channels, so a separate RS-232 receiver is required for a complete bidirectional port.
What are the main applications of the MC1488MEL?
The MC1488MEL is used in RS-232 data-terminal equipment, data-communications equipment, industrial serial interfaces, peripheral links, and legacy control ports. Its four-driver arrangement allows multiple unidirectional signals to share one package. Designers should account for the external receiver, cable routing, logic-level compatibility, and the bipolar supply rails in each implementation.
How does the MC1488MEL differ from a combined RS-232 transceiver?
The MC1488MEL is a driver-only device, while an RS-232 transceiver contains both driver and receiver functions. The MC1488MEL therefore drives four outgoing channels but cannot receive data without an external receiver. This division can be useful when a design needs several transmit paths with a different receiver arrangement, but it requires additional parts for bidirectional links.
Can the MC1488MEL replace an MC1488N?
The MC1488N comparison references a pin-compatible relationship to the MC1488 family, but package dimensions and terminal count must be checked before treating MC1488MEL as a direct board-level replacement. The MC1488MEL uses the 14-terminal SOEIAJ-14 surface-mount package. Confirm the candidate’s exact package, pin functions, temperature grade, and supply ratings against the manufacturer data before approving a substitution.
What is the best drop-in replacement for the MC1488MEL?
No alternative is listed here because the cross-reference results do not establish five or more same-package, pin-to-pin-compatible replacements with verified parameter proximity. MC1488-family variants and other RS-232 drivers can differ in terminal count, package width, logic thresholds, supply requirements, and active or inactive output behavior. The MC1488MEL should be replaced only after the candidate datasheet proves the same land pattern and compatible interface function.
What can replace the MC1488MEL?
A valid replacement must match the MC1488MEL’s 14-terminal surface-mount footprint, four-driver configuration, EIA-232D signal levels, supply arrangement, and required temperature grade. The cross-reference search identifies related MC1488 and DS1488-family devices, but it does not verify enough same-package alternatives to guarantee drop-in interchangeability. Use the Request a Quote form on this page when sourcing an exact replacement and provide the required package and temperature specifications.
Is the MC1488MEL an RS-232 transceiver?
The MC1488MEL is not a combined RS-232 transceiver; it is a quad line driver. It converts four logic-side inputs into EIA-232D driver outputs for transmission from data terminal equipment. A receiver IC is required when the interface must return incoming serial data to the logic system.
How should I design the power supply for the MC1488MEL?
Design the MC1488MEL supply around the manufacturer’s ±15 V operating specification and review the datasheet’s absolute-maximum ratings before adding protection. Keep the positive, negative, and ground return paths compact, and place bypass capacitance near the device according to the recommended application circuit. Also evaluate whether transient protection is needed for cables connected to external equipment.
How do I choose between the MC1488MEL and an RS-232 transceiver?
Choose the MC1488MEL when the design specifically needs four unidirectional EIA-232D driver channels and will use separate receivers. Choose a combined transceiver when the system needs both transmit and receive functions in one package and the selected device meets the required speed, supply, and protection specifications. The MC1488MEL is preferable when its four-driver architecture avoids unnecessary receiver circuitry.
Where can I buy the MC1488MEL and check its price and lead time?
Use the Request a Quote form on this page for current MC1488MEL pricing, stock status, lead time, and order handling. The verified distributor search confirms the exact onsemi part number and SOEIAJ-14 package, but it does not provide an explicit quantity-break price table for this MPN. A current quote should specify the package, quantity, and any required commercial-extended temperature-grade constraints.
Is the MC1488MEL currently in stock?
Current MC1488MEL inventory should be confirmed through the Request a Quote form on this page. The distributor result states that the part can be ordered, but its snippet does not provide a machine-verifiable stock quantity. Treat availability as changeable until a quotation confirms the exact MPN, package, quantity, and delivery schedule.
What is the price of the MC1488MEL?
The MC1488MEL price depends on order quantity, package, and current market conditions. The verified distributor results identify the exact part but do not print an explicit quantity-break table for MC1488MEL, so no static price is reproduced here. Submit the required quantity and delivery information through the Request a Quote form on this page for a current quotation.
What is the lead time for the MC1488MEL?
The current MC1488MEL lead time is confirmed through the Request a Quote form on this page. The verified search results establish the exact onsemi MPN and package but do not state a quantity-specific manufacturing or delivery schedule. Include your required quantity, target ship date, and approved package designation in the quote request.
What are the key specifications of MC1488MEL that engineers should know?
The MC1488MEL is a four-channel EIA-232D line driver in a 14-terminal SOEIAJ-14 surface-mount package. According to the onsemi MC1488 datasheet, it is designed for ±15 V operation and features current-limited outputs rated at ±10 mA typical. The central design trade-off is four unidirectional drivers in one package versus the extra circuitry needed for a bidirectional RS-232 port.

Datos de referencia de ingeniería para MC1488MEL — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the MC1488MEL when the design specifically requires four unidirectional EIA-232D driver outputs and can support the required ±15 V supply arrangement. Its integrated quad-driver architecture reduces the component count and simplifies multi-channel transmit routing. It is not the best choice when a single compact bidirectional RS-232 port is sufficient, because a combined transceiver can include receiver functions and may require fewer external support parts. Before selecting any replacement, verify the SOEIAJ-14 footprint, terminal assignments, logic thresholds, output-current limits, temperature grade, and supply requirements. Related MC1488-family devices can have different package dimensions or terminal counts, so functional similarity alone does not prove drop-in compatibility. For new multi-transmit designs, also evaluate whether a modern RS-232 interface with integrated protection offers a better overall solution; for legacy systems that require the established EIA-232D driver arrangement, the MC1488MEL remains a focused and practical choice.

Notas de diseño

Use the MC1488MEL datasheet’s ±15 V operating specification as the basis for the bipolar supply design. Place bypass capacitors close to the device’s supply pins according to the manufacturer’s typical application circuit and keep the ground return path short. External cables can carry transients, so assess whether additional series impedance, clamps, or connector-level protection are required without disturbing the EIA-232D output-current behavior.

Lay out the MC1488MEL strictly from the SOEIAJ-14 pin configuration and land pattern, not from a generic 14-pin package drawing. Confirm which terminals are inputs, outputs, supply rails, and ground before routing PCB tracks. Keep the driver outputs away from sensitive logic and maintain a continuous ground reference between the interface board and connector shield where the system architecture requires it.

Do not treat the MC1488MEL as a bidirectional transceiver: it is a driver-only device. A complete RS-232 port also requires one or more receivers, and every signal direction must be defined to prevent output contention. When evaluating MC1488-family replacements, compare terminal count, package width, logic thresholds, supply range, output-current limits, and temperature grade rather than relying only on the device description.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The MC1488MEL is a commercial-extended RS-232 line-driver IC and is not an automotive-qualified AEC-Q100 product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the verified sources and remain unknown.

Datos verificados el: 2026-11-11 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MC1488MEL datasheet MC1488MEL datasheet pdf MC1488MEL pinout MC1488MEL package MC1488MEL equivalent MC1488MEL replacement MC1488MEL cross reference MC1488MEL RS232 driver MC1488MEL price MC1488MEL stock onsemi MC1488MEL MC1488MEL EIA-232D

Componentes & términos relacionados

onsemi MC1488MEL MC1488 MC1488NE4 MC1489NG4 quad line driver RS-232 driver EIA-232D interface IC data terminal equipment data communications equipment line driver TTL logic CMOS logic bipolar supply current-limited output SOEIAJ-14 14-pin surface-mount package gull-wing lead commercial extended temperature grade serial communication transceiver receiver semiconductor
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ