Texas Instruments

MC3486DRE4 - 4-Channel RS-422 Receiver | Texas Instruments

N.º de pieza: MC3486DRE4 ✓ Activo
5 V Vdss 85 mA Id ANSI EIA/TIA-422-B and EIA/TIA-423-B Rds(on) 16-pin SOIC, 3.90 mm width Package
MOQ: 1 |

MC3486DRE4 Descripción general

Texas Instruments MC3486DRE4 is a quadruple differential line receiver with 3-state TTL-compatible outputs, designed for RS-422 and RS-423 communications from a single 5 V supply. The device provides four independent receiver channels in a 16-pin SOIC package and supports a maximum receive delay of 35 ns.

A differential line receiver is an interface IC that converts small differential signals appearing across a balanced pair of conductors into a single-ended logic signal. The MC3486 belongs to the receiver hierarchy within differential line-interface ICs, alongside transceivers, drivers, and comparators. Its differential input arrangement helps reject common-mode noise encountered on industrial, telecommunications, and data-processing cables.

The principal features include four independent receiver channels, 3-state outputs, and compatibility with EIA/TIA-422-B and EIA/TIA-423-B requirements. The device also supports ITU Recommendations V.10 and V.11, operates from one 5 V supply, and uses TTL-compatible output levels for direct connection to common digital logic. Fast transition times support reliable operation in multi-drop and point-to-point communication arrangements.

Internally, each receiver continuously compares its differential input with a threshold established by the line-driver and receiver ecosystem. When the output-enable function is active, the corresponding logic output reflects the received state; when disabled, the output enters a high-impedance state. This permits multiple devices to share a bus without creating output contention. The 16-pin SOIC outline provides a conventional surface-mount interface between the line receiver and an assembled circuit board.

Typical applications include balanced data links using the MC3487 quadruple differential line driver, industrial control interfaces, telecommunications equipment, peripheral data buses, and test systems requiring TTL-compatible receiver outputs. The component is particularly useful when a design must decode differential signaling while presenting conventional single-ended logic to a microprocessor, FPGA, or peripheral interface.

Designers should route each differential pair as a controlled-impedance pair, maintain the intended input/output common-mode limits, and account for enable timing when multiple receivers share a bus. Decoupling capacitors should be placed close to the supply pins, while unused inputs and disabled outputs require the pin-state and termination recommendations specified in the manufacturer datasheet.

This product page combines the manufacturer device information, package details, interface standards, direct replacement information, comparison data, and practical interface-design guidance. It also distinguishes exact MPN and packaging options from electrically similar receiver families that may not be pin-compatible replacements.

Alternativas directas para MC3486DRE4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MC3486DRE4 (mismo factor de forma y huella) — difiere en Logic Compatibility, Operating Temperature Range, Package, Supply Voltage.

Texas Instruments
Logic Compatibility: TTL-compatible outputs
Operating Temperature Range: 0°C to 70°C
Package: 16-pin SOIC
Comparar con MC3486DRE4 →
Texas Instruments
Logic Compatibility: TTL-compatible outputs
Operating Temperature Range: 0°C to 70°C
Package: 16-pin SOIC
Comparar con MC3486DRE4 →

MC3486DR

✅ Sustitución directa
Texas Instruments
📦 16-SOIC
Quadruple differential line receiver · 4 independent differential receivers · 5 V single supply · TTL-compatible 3-state outputs · Differential · ANSI TIA/EIA-422-B and TIA/EIA-423-B; ITU V.10 and V.11 · 3-state high-impedance output control · Fast transition times; exact value not provided

Consulte el precio

Ver hoja de datos →

MC3486D

✅ Sustitución directa
Texas Instruments
📦 16-SOIC
Quadruple differential line receiver · 4 independent differential receivers · 5 V single supply · TTL-compatible 3-state outputs · Differential · ANSI TIA/EIA-422-B and TIA/EIA-423-B; ITU V.10 and V.11 · 3-state high-impedance output control · Fast transition times; exact value not provided

Consulte el precio

Ver hoja de datos →

MC3486DRE4 Especificaciones

Product Type Quadruple differential line receiver
Receiver Channel Count 4 channels
Tensión de alimentación 5 V
Output State Control 3-state outputs
Logic Compatibility TTL-compatible
Supported Standards ANSI EIA/TIA-422-B and EIA/TIA-423-B
Supported ITU Recommendations ITU V.10 and V.11
Maximum Receive Delay 35 ns
Maximum Supply Current 85 mA
Rango de temperatura de funcionamiento 0 °C to 70 °C
Encapsulado 16-pin SOIC, 3.90 mm width
Recuento de pines 16 pins
Tipo de montaje Surface mount
Supply Configuration Single supply

Guía de configuración de pines de MC3486DRE4 16-pin soic, 3.90 mm width

Configuración de pines para MC3486DRE4 (encapsulado 16-pin soic, 3.90 mm width). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 16-pin soic, 3.90 mm width para MC3486DRE4

No hay datos detallados de patillaje disponibles para MC3486DRE4.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MC3486DRE4 es adecuado para 6 aplicacións: RS-422 Balanced Data Links, Industrial Control Interfaces, Telecommunications Equipment, Peripheral Data Buses, Test and Measurement Systems, Instrumentation and Data Acquisition.

🌐

RS-422 Balanced Data Links

The MC3486DRE4 is suitable for four-channel RS-422 links because it provides independent differential inputs, 3-state TTL-compatible outputs, and support for EIA/TIA-422-B. It can receive data from the MC3487 quadruple line driver over balanced copper wiring. The 35 ns maximum receive delay provides useful timing margin for many point-to-point or properly terminated multi-drop systems, although cable length and topology must still be evaluated against the complete interface specification.

🏭

Industrial Control Interfaces

The MC3486DRE4 fits industrial control equipment that receives commands or status information over differential pairs. Its four-channel organization reduces the receiver count needed for multi-axis, multi-card, or multi-signal systems, while the 5 V supply simplifies integration with conventional TTL-compatible control logic. Differential reception helps reject common-mode disturbances encountered near motors, relays, and switching equipment, provided the board layout preserves the intended pair geometry and grounding strategy.

🌐

Telecommunications Equipment

The MC3486DRE4 can support balanced receive paths in telecommunications and peripheral-interface equipment. Its compliance with EIA/TIA-422-B, EIA/TIA-423-B, and ITU V.10 and V.11 makes it suitable for established differential communication schemes. Four 3-state outputs allow receiver channels to be isolated when connected to shared buses, while the single 5 V supply supports compact, conventional logic integration.

🖥️

Peripheral Data Buses

The MC3486DRE4 is appropriate for peripheral data buses requiring balanced signaling and single-ended logic outputs. Each receiver converts a differential pair into a TTL-compatible signal that can be routed to a microprocessor, FPGA, or data-conversion device. The 3-state output feature is useful for shared-bus designs, but enable sequencing and output contention must be controlled in the system controller.

🔧

Test and Measurement Systems

The MC3486DRE4 can serve as the receiving element in bench and production test systems that exercise differential line-driver outputs. Four channels allow multiple signal pairs to be observed without requiring four separate receiver packages. Its maximum receive delay of 35 ns and TTL-compatible outputs simplify timing checks and logic-capture connections, while standard cable termination remains essential for repeatable measurements.

📡

Instrumentation and Data Acquisition

The MC3486DRE4 can be used in instrumentation and data-acquisition equipment that receives commands or measurement-related data over a balanced interface. Its four independent differential channels provide flexible channel allocation without requiring one receiver IC per signal. The device converts those inputs into TTL-compatible logic for downstream processing, although grounding, cable length, input termination, and common-mode limits require careful implementation.

What is the MC3486DRE4?
The MC3486DRE4 is a Texas Instruments quadruple differential line receiver with four 3-state, TTL-compatible outputs. According to the manufacturer datasheet, it meets or exceeds ANSI EIA/TIA-422-B and EIA/TIA-423-B requirements and supports ITU Recommendations V.10 and V.11. It operates from a single 5 V supply in a 16-pin SOIC package.
What is the MC3486DRE4 used for?
The MC3486DRE4 is used to convert four balanced differential data channels into single-ended TTL-compatible logic signals. It is intended for RS-422 and RS-423 links, including interfaces paired with the MC3487 quadruple differential line driver. Its maximum receive delay of 35 ns supports communication systems requiring deterministic signal propagation.
How many receiver channels does the MC3486DRE4 have?
The MC3486DRE4 contains four independent differential receiver channels. Each channel provides a 3-state output, allowing bus designers to disable an output when it is not needed. The manufacturer identifies the device as a quadruple differential line receiver rather than a single-channel or dual-channel receiver.
What supply voltage does the MC3486DRE4 require?
The MC3486DRE4 requires a single 5 V supply. The manufacturer datasheet identifies the device as operating from one 5 V rail, with a maximum supply current of 85 mA. Its TTL-compatible outputs allow the converted signals to interface directly with standard digital logic operating from a compatible voltage domain.
Which communication standards does the MC3486DRE4 support?
The MC3486DRE4 supports ANSI EIA/TIA-422-B and EIA/TIA-423-B requirements and ITU Recommendations V.10 and V.11. These specifications place it in balanced differential line-interface applications. The manufacturer datasheet is the controlling reference for detailed electrical limits and test conditions.
What is the maximum receive delay of the MC3486DRE4?
The MC3486DRE4 has a maximum receive delay of 35 ns. This value describes the propagation from a differential input transition to the corresponding receiver output transition under the manufacturer's stated conditions. It is relevant when designing bus timing, cable reach, and downstream-device setup margins.
What is the difference between MC3486DRE4 and MC3486DR?
The MC3486DRE4 and MC3486DR are electrically related 16-pin SOIC versions of the MC3486 receiver family. A direct comparison identifies the MC3486DR as a complete replacement whose terminals, package, and principal performance characteristics are consistent. Verify the exact ordering suffix, temperature grade, and delivery configuration against the manufacturer ordering information before substitution.
Can MC3486DR replace MC3486DRE4 in an existing design?
The MC3486DR can replace the MC3486DRE4 without modifying the existing 16-pin SOIC footprint, according to the published cross-reference comparison. Both belong to the MC3486 quadruple differential receiver family and share the same core functionality. Final substitution should still confirm suffix-specific temperature and packing requirements.
When should I choose the MC3486DRE4 instead of another RS-422 receiver?
Choose the MC3486DRE4 when the design requires four RS-422 or RS-423 differential inputs, a single 5 V supply, 3-state outputs, and a 16-pin SOIC footprint. It is particularly suitable when a maximum receive delay of 35 ns is acceptable. Select another family only when its enable logic, input thresholds, temperature range, or package matches the complete system requirement.
Is the MC3486DRE4 suitable for RS-423 communication?
Yes, the MC3486DRE4 is suitable for RS-423 communication because the manufacturer states that it meets or exceeds EIA/TIA-423-B requirements. It also supports ITU V.10 and V.11. The appropriate line termination, cable construction, and common-mode operating limits must still be established for the complete interface.
Where can I download the MC3486DRE4 datasheet PDF?
The official MC3486 datasheet is available through Texas Instruments at the product literature link on this page. It contains the electrical characteristics, interface standards, ordering information, and package details for the device family. Use the manufacturer literature to confirm the complete 16-pin connection and operating limits.
Where can I find the MC3486DRE4 pinout?
The MC3486DRE4 pin configuration is documented in the manufacturer datasheet, with the device supplied in a 16-pin SOIC package. Use the pin-description and connection diagrams when assigning input pairs, output-enable controls, ground, and supply pins. Do not infer pin functions from a visually similar receiver with a different enable architecture.
What can replace the MC3486DRE4?
The MC3486DR is a documented drop-in replacement for the MC3486DRE4 because it uses the same 16-pin SOIC footprint and retains the same core receiver characteristics. The direct replacement should be confirmed against the required temperature grade and ordering suffix. Other RS-422 receiver families may differ in enable inputs and cannot be assumed to be interchangeable.
Is there a Texas Instruments equivalent for the MC3486DRE4?
The closest documented Texas Instruments equivalent is the MC3486DR, a 16-pin SOIC member of the same receiver family. The published comparison describes it as a complete replacement with consistent terminals, package, and principal performance characteristics. It is preferable to a cross-brand substitute when exact pin compatibility and lifecycle continuity are priorities.
How do I connect the MC3486DRE4 in a balanced data link?
Connect each balanced signal pair to its designated differential receiver input and place the proper line termination at the physical ends of the cable. The MC3486DRE4 converts the four differential channels into 3-state TTL-compatible outputs. Follow the datasheet's common-mode voltage limits, output-enable sequence, supply decoupling, and unused-input guidance.
Where can I buy MC3486DRE4 and check its current lead time?
Use the Request a Quote form on this page to request MC3486DRE4 pricing, current inventory, minimum order quantity, and production lead time. The form provides a direct purchasing path without relying on stale catalog figures. Include the required package, temperature, quantity, and shipment destination in the request.

Datos de referencia de ingeniería para MC3486DRE4 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the MC3486DRE4 when a design requires four balanced RS-422 or RS-423 inputs, a single 5 V supply, 3-state TTL-compatible outputs, and a 16-pin SOIC footprint. It is a strong fit for links paired with the MC3487 driver and for systems needing a maximum receive delay of no more than 35 ns. The MC3486DR is the closest documented replacement when its exact suffix-specific temperature and packing requirements match the target; the MC3486D provides the same family and footprint but should also be qualified by ordering information. Do not substitute a generic quad RS-422 receiver solely by package count. Enable polarity, common-mode range, input impedance, output timing, and pin definitions must match. For new designs, also verify lifecycle availability, operating temperature, and the complete cable termination topology.

Comparación con alternativas

Parámetro Este producto MC3486DR MC3486D
Brand Texas Instruments Texas Instruments Texas Instruments
Package 16-SOIC 16-SOIC 16-SOIC
Receiver Configuration Quadruple differential receiver Quadruple differential receiver Quadruple differential receiver
Supply Voltage 5 V single supply 5 V single supply 5 V single supply
Maximum Receive Delay 35 ns 35 ns 35 ns
Maximum Supply Current 85 mA 85 mA 85 mA
Output Type 3-state TTL-compatible 3-state TTL-compatible 3-state TTL-compatible
Supported Interface Standards EIA/TIA-422-B, EIA/TIA-423-B, ITU V.10 and V.11 EIA/TIA-422-B, EIA/TIA-423-B, ITU V.10 and V.11 EIA/TIA-422-B, EIA/TIA-423-B, ITU V.10 and V.11

Diferenciadores clave

  • Four integrated differential receiver channels (frente a MC3486DR)
  • Compatibility with the MC3487 driver family (frente a MC3486D)
  • 35 ns maximum receive delay (frente a MC3486DR)

Notas de diseño

Route each differential input as a closely coupled pair with substantially uniform geometry and spacing across the board. Keep the receiver input path away from switching nodes and high-current return paths. Where the interface crosses split planes, add stitching capacitors at the appropriate reference-plane transition and follow the manufacturer's layer-stack and return-path guidance.

Apply termination consistently according to the selected EIA/TIA-422-B or EIA/TIA-423-B topology rather than terminating every receiver at the device. Termination is generally placed at the physical ends of a properly configured cable. Preserve the data and enable timing budget using the 35 ns maximum receive delay as one receiver-stage contribution.

Do not treat any RS-422-family receiver as automatically interchangeable. Verify the exact 16-pin pinout, output-enable polarity, common-mode input range, input impedance, supply limits, and temperature grade. A component can have the same SOIC outline yet require different enable control or terminate inputs differently.

Place the supply bypass capacitor as close as practical to the device's supply and ground pins, and keep the return path short. The receiver's maximum supply current is 85 mA, so the regulator and nearby logic should provide adequate transient capability without placing long supply traces between the decoupling element and the device.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer interface and ordering pages do not establish the requested environmental declarations in the indexed material. Use the current manufacturer product declaration and applicable material documentation for formal qualification.

Datos verificados el: 2026-11-16 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MC3486DRE4 datasheet MC3486DRE4 datasheet pdf MC3486DRE4 pinout MC3486DRE4 replacement MC3486DRE4 equivalent MC3486DRE4 cross reference MC3486DRE4 vs MC3486DR Texas Instruments MC3486DRE4 MC3486DRE4 16-SOIC receiver MC3486DRE4 RS-422 interface MC3486DRE4 price MC3486DRE4 stock

Componentes & términos relacionados

Texas Instruments MC3486DRE4 MC3486DR MC3486D MC3487DR AM26LS33ACD quadruple differential line receiver differential line receiver receiver interface IC semiconductor RS-422 RS-423 ANSI EIA/TIA-422-B ANSI EIA/TIA-423-B ITU V.10 ITU V.11 3-state output TTL-compatible output single 5 V supply 16-SOIC SOIC family surface mount 35 ns maximum receive delay
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ