MC3486DRE4 - 4-Channel RS-422 Receiver | Texas Instruments
MPN: MC3486DRE4 ✓ AktifMC3486DRE4 Ringkasan
A differential line receiver is an interface IC that converts small differential signals appearing across a balanced pair of conductors into a single-ended logic signal. The MC3486 belongs to the receiver hierarchy within differential line-interface ICs, alongside transceivers, drivers, and comparators. Its differential input arrangement helps reject common-mode noise encountered on industrial, telecommunications, and data-processing cables.
The principal features include four independent receiver channels, 3-state outputs, and compatibility with EIA/TIA-422-B and EIA/TIA-423-B requirements. The device also supports ITU Recommendations V.10 and V.11, operates from one 5 V supply, and uses TTL-compatible output levels for direct connection to common digital logic. Fast transition times support reliable operation in multi-drop and point-to-point communication arrangements.
Internally, each receiver continuously compares its differential input with a threshold established by the line-driver and receiver ecosystem. When the output-enable function is active, the corresponding logic output reflects the received state; when disabled, the output enters a high-impedance state. This permits multiple devices to share a bus without creating output contention. The 16-pin SOIC outline provides a conventional surface-mount interface between the line receiver and an assembled circuit board.
Typical applications include balanced data links using the MC3487 quadruple differential line driver, industrial control interfaces, telecommunications equipment, peripheral data buses, and test systems requiring TTL-compatible receiver outputs. The component is particularly useful when a design must decode differential signaling while presenting conventional single-ended logic to a microprocessor, FPGA, or peripheral interface.
Designers should route each differential pair as a controlled-impedance pair, maintain the intended input/output common-mode limits, and account for enable timing when multiple receivers share a bus. Decoupling capacitors should be placed close to the supply pins, while unused inputs and disabled outputs require the pin-state and termination recommendations specified in the manufacturer datasheet.
This product page combines the manufacturer device information, package details, interface standards, direct replacement information, comparison data, and practical interface-design guidance. It also distinguishes exact MPN and packaging options from electrically similar receiver families that may not be pin-compatible replacements.
Alternatif penggantian untuk MC3486DRE4 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MC3486DRE4 (sama faktor bentuk dan footprint) — berbeda di dalam Logic Compatibility, Operating Temperature Range, Package, Supply Voltage.
MC3486DR
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC3486D
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC3486DRE4 Spesifikasi
| Product Type | Quadruple differential line receiver |
| Receiver Channel Count | 4 channels |
| Tegangan Pemuat | 5 V |
| Output State Control | 3-state outputs |
| Logic Compatibility | TTL-compatible |
| Supported Standards | ANSI EIA/TIA-422-B and EIA/TIA-423-B |
| Supported ITU Recommendations | ITU V.10 and V.11 |
| Maximum Receive Delay | 35 ns |
| Maximum Supply Current | 85 mA |
| Rentang Suhu Kerja | 0 °C to 70 °C |
| Paket | 16-pin SOIC, 3.90 mm width |
| Jumlah Pin | 16 pins |
| Tipe Mounting | Surface mount |
| Supply Configuration | Single supply |
MC3486DRE4 16-pin soic, 3.90 mm width Diamant Konfigurasi Panduan
Konfigurasi pin untuk MC3486DRE4 (16-pin soic, 3.90 mm width pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk MC3486DRE4.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
MC3486DRE4 cocok untuk 6 aplikasis: RS-422 Balanced Data Links, Industrial Control Interfaces, Telecommunications Equipment, Peripheral Data Buses, Test and Measurement Systems, Instrumentation and Data Acquisition.
RS-422 Balanced Data Links
The MC3486DRE4 is suitable for four-channel RS-422 links because it provides independent differential inputs, 3-state TTL-compatible outputs, and support for EIA/TIA-422-B. It can receive data from the MC3487 quadruple line driver over balanced copper wiring. The 35 ns maximum receive delay provides useful timing margin for many point-to-point or properly terminated multi-drop systems, although cable length and topology must still be evaluated against the complete interface specification.
Direkomendasikan
Industrial Control Interfaces
The MC3486DRE4 fits industrial control equipment that receives commands or status information over differential pairs. Its four-channel organization reduces the receiver count needed for multi-axis, multi-card, or multi-signal systems, while the 5 V supply simplifies integration with conventional TTL-compatible control logic. Differential reception helps reject common-mode disturbances encountered near motors, relays, and switching equipment, provided the board layout preserves the intended pair geometry and grounding strategy.
Direkomendasikan
Telecommunications Equipment
The MC3486DRE4 can support balanced receive paths in telecommunications and peripheral-interface equipment. Its compliance with EIA/TIA-422-B, EIA/TIA-423-B, and ITU V.10 and V.11 makes it suitable for established differential communication schemes. Four 3-state outputs allow receiver channels to be isolated when connected to shared buses, while the single 5 V supply supports compact, conventional logic integration.
Direkomendasikan
Peripheral Data Buses
The MC3486DRE4 is appropriate for peripheral data buses requiring balanced signaling and single-ended logic outputs. Each receiver converts a differential pair into a TTL-compatible signal that can be routed to a microprocessor, FPGA, or data-conversion device. The 3-state output feature is useful for shared-bus designs, but enable sequencing and output contention must be controlled in the system controller.
Direkomendasikan
Test and Measurement Systems
The MC3486DRE4 can serve as the receiving element in bench and production test systems that exercise differential line-driver outputs. Four channels allow multiple signal pairs to be observed without requiring four separate receiver packages. Its maximum receive delay of 35 ns and TTL-compatible outputs simplify timing checks and logic-capture connections, while standard cable termination remains essential for repeatable measurements.
Direkomendasikan
Instrumentation and Data Acquisition
The MC3486DRE4 can be used in instrumentation and data-acquisition equipment that receives commands or measurement-related data over a balanced interface. Its four independent differential channels provide flexible channel allocation without requiring one receiver IC per signal. The device converts those inputs into TTL-compatible logic for downstream processing, although grounding, cable length, input termination, and common-mode limits require careful implementation.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MC3486DRE4 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MC3486DR | MC3486D |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-SOIC | 16-SOIC | 16-SOIC |
| Receiver Configuration | Quadruple differential receiver | Quadruple differential receiver | Quadruple differential receiver |
| Supply Voltage | 5 V single supply | 5 V single supply | 5 V single supply |
| Maximum Receive Delay | 35 ns | 35 ns | 35 ns |
| Maximum Supply Current | 85 mA | 85 mA | 85 mA |
| Output Type | 3-state TTL-compatible | 3-state TTL-compatible | 3-state TTL-compatible |
| Supported Interface Standards | EIA/TIA-422-B, EIA/TIA-423-B, ITU V.10 and V.11 | EIA/TIA-422-B, EIA/TIA-423-B, ITU V.10 and V.11 | EIA/TIA-422-B, EIA/TIA-423-B, ITU V.10 and V.11 |
Diferensiator Kunci
- Four integrated differential receiver channels (vsMC3486DR)
- Compatibility with the MC3487 driver family (vsMC3486D)
- 35 ns maximum receive delay (vsMC3486DR)
Catatan Desain
Route each differential input as a closely coupled pair with substantially uniform geometry and spacing across the board. Keep the receiver input path away from switching nodes and high-current return paths. Where the interface crosses split planes, add stitching capacitors at the appropriate reference-plane transition and follow the manufacturer's layer-stack and return-path guidance.
Apply termination consistently according to the selected EIA/TIA-422-B or EIA/TIA-423-B topology rather than terminating every receiver at the device. Termination is generally placed at the physical ends of a properly configured cable. Preserve the data and enable timing budget using the 35 ns maximum receive delay as one receiver-stage contribution.
Do not treat any RS-422-family receiver as automatically interchangeable. Verify the exact 16-pin pinout, output-enable polarity, common-mode input range, input impedance, supply limits, and temperature grade. A component can have the same SOIC outline yet require different enable control or terminate inputs differently.
Place the supply bypass capacitor as close as practical to the device's supply and ground pins, and keep the return path short. The receiver's maximum supply current is 85 mA, so the regulator and nearby logic should provide adequate transient capability without placing long supply traces between the decoupling element and the device.
Informasi Konformitas
The manufacturer interface and ordering pages do not establish the requested environmental declarations in the indexed material. Use the current manufacturer product declaration and applicable material documentation for formal qualification.