NXP Semiconductors

MC9S08PA4AVSC - 20MHz 8-Bit MCU with 4KB Flash | NXP

N.º de pieza: MC9S08PA4AVSC ✓ Activo
2.7 V to 5.5 V Vdss 8-pin SOIC Package 20 MHz Speed 4 KB flash Memory
MOQ: 1 |

MC9S08PA4AVSC Descripción general

NXP Semiconductors MC9S08PA4AVSC is an 8-bit S08 microcontroller with a 20 MHz CPU, 4 KB program flash, integrated EEPROM, an integrated low-dropout regulator, and an 8-pin SOIC package. It operates from 2.7 V to 5.5 V across the specified operating-temperature range and supports as many as 40 interrupt or reset sources with up to four levels of nested interrupts.

An 8-bit microcontroller is a programmable semiconductor containing a central processing unit, memory, timers, analog peripherals, and communication interfaces on one integrated circuit. The S08PA belongs to the microcontroller hierarchy, combining a cost-sensitive embedded CPU core with mixed-signal and timing resources. Within NXP’s S08 family, this device provides a compact platform for simple control, sensing, and actuator-management designs without requiring an external memory or regulator.

The MC9S08PA4 includes 4 KB of flash for program storage and integrated EEPROM for data that must survive power loss. Its analog resources include an ADC and analog comparator, while the timer resources support motor-control-oriented applications. The integrated regulator simplifies power architecture, and the 20 MHz maximum bus rate provides useful processing margin for responsive control loops in compact systems.

The S08 CPU architecture is designed around an economical embedded instruction set and a peripheral set intended to reduce external component count. Four-level nested interrupt support helps separate time-critical tasks from higher-level foreground and background processing. Because the device is specified for operation from 2.7 V to 5.5 V, it can support both lower-voltage 3.3 V systems and conventional 5 V industrial or consumer equipment when the board-level power design confirms operating limits.

Typical uses include small motor controllers, appliance controls, sensor interfaces, compact automation modules, and cost-sensitive embedded products. The 8-pin SOIC-8 package also supports through-hole PCB assembly and automated inspection, making the device suitable for designs that require a small footprint without relying on a fine-pitch surface-mount package.

When laying out the board, preserve the manufacturer’s recommended decoupling and programming-interface connections, and do not assume that adjacent pins can carry unrestricted peripheral functions. Confirm the exact multiplexed-pin configuration and programming requirements against the NXP MC9S08PA4 datasheet before assigning functions to the eight available pins.

This product overview combines the confirmed operating limits, memory configuration, processor speed, package information, and embedded resources with practical selection and PCB considerations. It also identifies pin-compatible family alternatives and organizes the technical trade-offs needed to decide whether the MC9S08PA4AVSC fits a new embedded-control design.

Alternativas directas para MC9S08PA4AVSC — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

MC9S08PA4VAG

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 SOIC-8
Same 20 MHz S08 core and 4 KB flash class; ordering suffix and qualification details require confirmation

📋 Alternativa de referencia (no en el catálogo)

MC9S08PA2VAG

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 SOIC-8
Flash is 2 KB instead of 4 KB, a 50% reduction; CPU and voltage class remain aligned

📋 Alternativa de referencia (no en el catálogo)

MC9S08PA1VAG

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 SOIC-8
Flash is 1 KB instead of 4 KB, a 75% reduction; pin-compatible only for applications within the smaller memory limit

📋 Alternativa de referencia (no en el catálogo)

MC9S08PA4AVSC Valores máximos y características eléctricas

Product Type 8-bit microcontroller
Architecture S08 CPU
Maximum CPU or Bus Frequency 20 MHz
Program Memory 4 KB flash
Program Memory Organization 4K x 8
Data Memory Type Integrated EEPROM
Operating Voltage Range 2.7 V to 5.5 V
Interrupt and Reset Sources Up to 40 sources
Nested Interrupt Levels Up to 4 levels
Integrated Analog Features ADC and analog comparator
Integrated Power Regulator Integrated LDO regulator
Motor-Control Timing Resource Flex timer
Encapsulado 8-pin SOIC
Package Type SOIC-8
Tipo de montaje Surface mount
Moisture Sensitivity Level MSL 3
Peak Reflow Temperature 260 C
Maximum Time at Peak Reflow Temperature 40 s
Terminal Finish Tin
JESD Code e3

Guía de configuración de pines de MC9S08PA4AVSC soic-8

Configuración de pines para MC9S08PA4AVSC (encapsulado soic-8). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado soic-8 para MC9S08PA4AVSC

No hay datos detallados de patillaje disponibles para MC9S08PA4AVSC.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MC9S08PA4AVSC es adecuado para 6 aplicacións: Compact Motor Controller, Appliance Control Module, Industrial Sensor Interface, Cost-Sensitive Embedded Product, Small Timing and Control System, Programmable Logic Controller.

⚡

Compact Motor Controller

MC9S08PA4AVSC fits compact motor-control designs that require more code space than the smallest S08PA devices while retaining a low component count. Its 20 MHz S08 CPU executes control logic quickly enough for responsive supervisory tasks, while the integrated flex timer supports deterministic timing for motor-control functions. The ADC can sample feedback signals, the analog comparator can detect thresholds, and EEPROM can retain calibration values without an external memory device. Using the 2.7 V to 5.5 V operating range, the controller can operate from regulated 3.3 V or 5 V rails. Final design work must confirm motor-drive topology, current limits, protection behavior, and timing margins.

🏭

Appliance Control Module

MC9S08PA4AVSC is suitable for appliance-control modules that coordinate buttons, indicators, sensors, and small actuators within an economical embedded platform. Its 4 KB of flash provides substantially more program storage than a 1 KB-class MCU, supporting state machines, diagnostic logic, and product-specific behavior. Integrated EEPROM allows settings or calibration data to survive power cycles, and the ADC simplifies analog front-end implementation. The eight-pin SOIC-8 package also offers an attractive assembly option for mixed-technology control boards. Engineers should assign the multiplexed pins from the NXP pin table, provide the recommended bypass capacitors, and verify that the selected timer and I/O functions do not conflict with the appliance’s safety requirements.

🏭

Industrial Sensor Interface

MC9S08PA4AVSC can serve as the local controller for a compact industrial sensor interface because it combines a 20 MHz S08 processor, ADC, comparator, timer resources, and EEPROM in one package. The 4 KB program memory supports calibration tables, filtering, diagnostics, and communication handling, while the 2.7 V to 5.5 V supply range accommodates common 3.3 V and 5 V industrial rails. The integrated LDO can simplify the local power arrangement when the architecture is designed around its input and output requirements. For reliable deployment, protect analog inputs from transients, maintain clean reference routing, and validate the sensor interface across the full industrial temperature and electromagnetic-interference environment required by the product.

🔧

Cost-Sensitive Embedded Product

MC9S08PA4AVSC is appropriate for a cost-sensitive embedded product whose firmware, analog measurement, and control functions must fit within 4 KB of program memory. The 8-bit S08 architecture avoids unnecessary processing complexity, while the integrated EEPROM, ADC, comparator, timers, and LDO reduce the number of external devices. At up to 20 MHz, the processor provides useful throughput for protocol handling, state-machine execution, and supervisory logic. Its SOIC-8 package supports automated assembly and accommodates production designs that prefer a less dense footprint. Designers should build in flash margin for revisions, use the EEPROM only for appropriate endurance and data-retention workloads, and validate the power budget at the lowest intended input voltage.

⏱️

Small Timing and Control System

MC9S08PA4AVSC is well matched to a small timing and control system requiring deterministic embedded execution without a large processor. The S08PA flex timer provides a dedicated timing resource, while support for as many as 40 interrupt or reset sources and four nested interrupt levels allows time-critical tasks to be organized systematically. The 4 KB flash budget is suitable for control sequences, event handling, and diagnostics when firmware is kept disciplined. A 3.3 V or 5 V regulated architecture can be supported within the stated 2.7 V to 5.5 V range. The design should define interrupt priorities before implementation, test worst-case interrupt latency, and confirm that timing margins remain adequate across the intended voltage and temperature conditions.

🏭

Programmable Logic Controller

MC9S08PA4AVSC can support a small programmable logic controller when the required functions are limited to a handful of digital inputs, outputs, timing operations, and simple analog supervision. Its 20 MHz processing rate allows responsive ladder-style or state-machine execution, and the integrated EEPROM can retain configuration values and production data. The ADC and comparator extend the controller beyond purely digital I/O, while the eight-pin package limits available pin multiplexing and makes careful signal assignment essential. It is most appropriate for compact, cost-sensitive machines rather than large safety-critical PLCs. Engineering validation should include input filtering, output drive limits, watchdog behavior, brownout handling, isolation requirements, and environmental testing appropriate to the machine environment.

What is the operating voltage of MC9S08PA4AVSC?
The MC9S08PA4AVSC operates from 2.7 V to 5.5 V. According to the NXP manufacturer datasheet, this range applies across the device’s specified operating-temperature limits and supports both 3.3 V and 5 V system architectures. The exact temperature limits and timing behavior at the voltage extremes should be checked in the datasheet tables before assigning production operating limits.
How much flash memory does MC9S08PA4AVSC have?
The MC9S08PA4AVSC contains 4 KB of flash memory organized as 4K x 8. According to the NXP manufacturer datasheet, this on-chip nonvolatile program memory eliminates the need for an external program-memory device in applications that fit within the available code space. The same device family also integrates EEPROM for nonvolatile data storage.
What is the maximum clock frequency of MC9S08PA4AVSC?
The maximum S08 bus frequency for MC9S08PA4AVSC is 20 MHz. According to the NXP manufacturer datasheet, the device can operate across its 2.7 V to 5.5 V supply range at the stated maximum bus rate. Clock configuration, flash wait-state behavior, and peripheral timing must follow the family’s recommended operating conditions.
What package does MC9S08PA4AVSC use?
The MC9S08PA4AVSC is packaged in an 8-pin SOIC, commonly identified as SOIC-8. According to the NXP product information and manufacturer datasheet, this surface-mount package exposes the S08 microcontroller, power connections, programming interface, and multiplexed I/O through eight pins. Use the package drawing and pin-description table for final PCB layout and connectivity.
Where can I download the MC9S08PA4AVSC datasheet PDF?
The official MC9S08PA4AVSC datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/MC9S08PA4.pdf. According to the NXP manufacturer datasheet, the document covers the S08 CPU, operating voltage, interrupt capability, memory, peripherals, electrical characteristics, and package information. A separate MC9S08PA4 reference manual provides deeper architectural and register-level detail.
Where is the MC9S08PA4AVSC pinout located?
The MC9S08PA4AVSC pinout is shown in the pin-description and package-drawing sections of the NXP MC9S08PA4 manufacturer datasheet. The device uses an SOIC-8 package, but several pins support multiplexed peripheral functions. Assign signals from the datasheet pin table rather than inferring them from generic S08 examples, especially for reset, programming, timer, and analog-capable pins.
Does MC9S08PA4AVSC include EEPROM and an ADC?
Yes, the MC9S08PA4AVSC integrates EEPROM, an ADC, and an analog comparator. According to the NXP manufacturer datasheet, EEPROM preserves frequently changed parameter or calibration data without an external nonvolatile-memory IC. The ADC and comparator support direct sensing of analog quantities, helping reduce board size and external analog component count.
What is the best drop-in replacement for MC9S08PA4AVSC?
The closest same-family drop-in choices are MC9S08PA4VAG, MC9S08PA2VAG, and MC9S08PA1VAG when their SOIC-8 pinouts and device settings have been confirmed against the NXP pin-compatibility documentation. MC9S08PA4VAG is the closest memory match, while the PA2 and PA1 options require attention to reduced flash capacity. No verified cross-brand drop-in replacement was identified.
Can MC9S08PA4VAG replace MC9S08PA4AVSC?
MC9S08PA4VAG can be considered a close same-family replacement after confirming its exact package drawing, pin mapping, temperature grade, and device configuration. It retains the 4 KB flash class and 20 MHz S08 performance of MC9S08PA4AVSC. However, suffix changes can affect ordering codes, qualification details, or configuration, so compare the relevant ordering-information table before production use.
MC9S08PA4AVSC vs MC9S08PA2VAG: which is better for new designs?
MC9S08PA4AVSC is the better choice when firmware growth, future features, or a larger application code base makes 4 KB of flash preferable to 2 KB. MC9S08PA2VAG is appropriate only when its final application comfortably fits within 2 KB of flash. Both use the S08PA 8-bit architecture and 20 MHz operating class, but code-storage capacity is the principal measurable distinction.
When should I choose MC9S08PA4AVSC over MC9S08PA1VAG?
Choose MC9S08PA4AVSC when the application needs more program space than the 1 KB class offered by MC9S08PA1VAG. The target provides 4 KB of flash, creating three times the nominal program-memory capacity while retaining the 20 MHz S08 architecture. MC9S08PA1VAG may be more attractive for very small fixed-function firmware only after its exact memory map and peripheral configuration have been confirmed.
Is MC9S08PA4AVSC suitable for motor-control applications?
MC9S08PA4AVSC is suitable for compact motor-control applications because the S08PA family includes a motor-control flex timer, ADC, comparator, and EEPROM. According to the NXP manufacturer datasheet, these resources can support sensing, timing, and stored configuration in a small controller. Final suitability depends on motor voltage, current, switching timing, protection requirements, and the use of NXP’s motor-control flex timer modules.
Where can I buy MC9S08PA4AVSC and check its price?
Use the Request a Quote form on this page to ask for MC9S08PA4AVSC pricing, availability, and lead time. The form is the appropriate route for a current commercial quotation without relying on a static listing that may be out of date. For technical confirmation, consult the NXP product page and manufacturer datasheet for the exact ordering code and package configuration.
What is the lead time for MC9S08PA4AVSC?
Current lead time for MC9S08PA4AVSC should be requested through the Request a Quote form on this page. The NXP product page identifies the device as active, but an active lifecycle status does not by itself establish current stock, allocation, or a shipment date. Include the required quantity, package, and target production schedule when requesting the quotation.
What are the key specifications of MC9S08PA4AVSC that engineers should know?
MC9S08PA4AVSC is a 20 MHz 8-bit S08 microcontroller with 4 KB of flash, integrated EEPROM, a 2.7 V to 5.5 V supply range, and an SOIC-8 package. According to the NXP manufacturer datasheet, it supports up to 40 interrupt or reset sources and four levels of nested interrupts. Its ADC, comparator, flex timer, and integrated regulator make it suitable for compact embedded-control designs.
What NXP equivalent should be considered for MC9S08PA4AVSC?
The most relevant NXP equivalent is MC9S08PA4VAG, subject to confirmation of the exact package pinout and ordering characteristics. MC9S08PA2VAG and MC9S08PA1VAG are closer lower-flash family alternatives rather than exact functional equivalents. No verified cross-brand equivalent was identified with an independently confirmed eight-pin pin-to-pin layout, so cross-brand substitution should not be assumed.

Datos de referencia de ingeniería para MC9S08PA4AVSC — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MC9S08PA4AVSC for compact 8-bit embedded-control products that need 4 KB of program flash, EEPROM, an ADC, a comparator, timing resources, and operation from 2.7 V to 5.5 V. Its SOIC-8 package is particularly useful when a low-pin-count through-hole-compatible surface-mount design and a cost-sensitive 8-bit architecture are priorities. MC9S08PA4VAG is the closest listed family alternative when its ordering code and qualification details are acceptable. Select MC9S08PA2VAG only when 2 KB of flash is sufficient, and MC9S08PA1VAG only for very small fixed-function firmware with ample memory margin. No cross-brand drop-in option with a verified pin-to-pin eight-pin layout was identified, so changing manufacturers would require a deliberate schematic, firmware, and qualification review rather than a simple PCB substitution.

Comparación con alternativas

Parámetro Este producto MC9S08PA4VAG MC9S08PA2VAG MC9S08PA1VAG
Package SOIC-8 SOIC-8 SOIC-8 SOIC-8
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
CPU Architecture 8-bit S08 8-bit S08 8-bit S08 8-bit S08
Maximum Bus Frequency 20 MHz 20 MHz 20 MHz 20 MHz
Program Flash 4 KB 4 KB 2 KB 1 KB
Operating Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
EEPROM Integrated Integrated Integrated Integrated
Integrated Analog Resources ADC and analog comparator ADC and analog comparator ADC and analog comparator ADC and analog comparator
Interrupt and Reset Sources Up to 40 Up to 40 Up to 40 Up to 40
Integrated Regulator Integrated LDO Integrated LDO Integrated LDO Integrated LDO

Diferenciadores clave

  • Largest confirmed flash capacity among the listed S08PA alternatives (frente a MC9S08PA2VAG)
  • Greater firmware-growth margin than the 1 KB-class family option (frente a MC9S08PA1VAG)
  • Confirmed 20 MHz operating class across the same-family alternatives (frente a MC9S08PA4VAG)

Notas de diseño

Design the power tree around the 2.7 V to 5.5 V operating range and the integrated regulator architecture. Place the regulator input and output bypass capacitors at the pins identified by the NXP MC9S08PA4 manufacturer datasheet, using the required capacitance and voltage rating. Account for the voltage drop across the internal LDO when calculating core-current headroom, and verify brownout behavior against the minimum rail voltage used in the product.

Assign every signal using the eight-pin package description rather than relying on a generic S08 schematic. Keep the programming interface and reset path accessible for manufacturing and field service, preserve the pin-1 orientation of the SOIC-8 footprint, and provide adequate clearance between the MCU and switching or inductive components. A compact layout reduces trace resistance and noise pickup, but routing savings should not compromise debug access.

The largest substitution risk is treating different S08PA memory variants as exact equivalents. MC9S08PA4VAG retains the 4 KB flash class, whereas MC9S08PA2VAG and MC9S08PA1VAG reduce program memory by 50% and 75%, respectively. Verify the compiled image size, bootloader assumptions, EEPROM usage, and peripheral configuration before accepting a lower-flash replacement for an existing MC9S08PA4AVSC design.

Estimate internal power dissipation from the core current, I/O loading, analog activity, and the difference between the external supply and the internal regulated voltage. The NXP manufacturer datasheet states that I/O power dissipation is normally smaller than dissipation in the logic and voltage-regulator circuits, so regulator losses can dominate. Validate the calculation at the highest intended operating temperature and the maximum production load rather than relying only on nominal conditions.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The ordering information identifies JESD code e3 and tin termination, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not present in the cited results.

Datos verificados el: 2026-11-20 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MC9S08PA4AVSC datasheet MC9S08PA4AVSC pinout MC9S08PA4AVSC datasheet pdf MC9S08PA4AVSC equivalent MC9S08PA4AVSC replacement MC9S08PA4AVSC price MC9S08PA4AVSC stock NXP MC9S08PA4AVSC MC9S08PA4 20MHz 4KB flash MC9S08PA4 SOIC-8 pinout MC9S08PA4AVSC motor controller MC9S08PA4AVSC vs MC9S08PA4VAG MC9S08PA4AVSC application circuit MC9S08PA4 reference manual

Componentes & términos relacionados

NXP Semiconductors MC9S08PA4AVSC MC9S08PA4VAG MC9S08PA2VAG MC9S08PA1VAG MC9S08PA4 S08 CPU 8-bit microcontroller microcontroller embedded processor semiconductor 4 KB flash EEPROM ADC analog comparator flex timer motor control integrated LDO power management IC 2.7 V to 5.5 V 20 MHz SOIC-8 QFN family surface mount SMD
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ