MC9S08PA4AVSC - 20MHz 8-Bit MCU with 4KB Flash | NXP
N.º da peça: MC9S08PA4AVSC ✓ AtivoMC9S08PA4AVSC Visão geral
An 8-bit microcontroller is a programmable semiconductor containing a central processing unit, memory, timers, analog peripherals, and communication interfaces on one integrated circuit. The S08PA belongs to the microcontroller hierarchy, combining a cost-sensitive embedded CPU core with mixed-signal and timing resources. Within NXP’s S08 family, this device provides a compact platform for simple control, sensing, and actuator-management designs without requiring an external memory or regulator.
The MC9S08PA4 includes 4 KB of flash for program storage and integrated EEPROM for data that must survive power loss. Its analog resources include an ADC and analog comparator, while the timer resources support motor-control-oriented applications. The integrated regulator simplifies power architecture, and the 20 MHz maximum bus rate provides useful processing margin for responsive control loops in compact systems.
The S08 CPU architecture is designed around an economical embedded instruction set and a peripheral set intended to reduce external component count. Four-level nested interrupt support helps separate time-critical tasks from higher-level foreground and background processing. Because the device is specified for operation from 2.7 V to 5.5 V, it can support both lower-voltage 3.3 V systems and conventional 5 V industrial or consumer equipment when the board-level power design confirms operating limits.
Typical uses include small motor controllers, appliance controls, sensor interfaces, compact automation modules, and cost-sensitive embedded products. The 8-pin SOIC-8 package also supports through-hole PCB assembly and automated inspection, making the device suitable for designs that require a small footprint without relying on a fine-pitch surface-mount package.
When laying out the board, preserve the manufacturer’s recommended decoupling and programming-interface connections, and do not assume that adjacent pins can carry unrestricted peripheral functions. Confirm the exact multiplexed-pin configuration and programming requirements against the NXP MC9S08PA4 datasheet before assigning functions to the eight available pins.
This product overview combines the confirmed operating limits, memory configuration, processor speed, package information, and embedded resources with practical selection and PCB considerations. It also identifies pin-compatible family alternatives and organizes the technical trade-offs needed to decide whether the MC9S08PA4AVSC fits a new embedded-control design.
Alternativas drop-in para MC9S08PA4AVSC — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
MC9S08PA4VAG
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MC9S08PA2VAG
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MC9S08PA1VAG
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MC9S08PA4AVSC Classificações máximas e características elétricas
| Product Type | 8-bit microcontroller |
| Architecture | S08 CPU |
| Maximum CPU or Bus Frequency | 20 MHz |
| Program Memory | 4 KB flash |
| Program Memory Organization | 4K x 8 |
| Data Memory Type | Integrated EEPROM |
| Operating Voltage Range | 2.7 V to 5.5 V |
| Interrupt and Reset Sources | Up to 40 sources |
| Nested Interrupt Levels | Up to 4 levels |
| Integrated Analog Features | ADC and analog comparator |
| Integrated Power Regulator | Integrated LDO regulator |
| Motor-Control Timing Resource | Flex timer |
| Encapsulamento | 8-pin SOIC |
| Package Type | SOIC-8 |
| Tipo de montagem | Surface mount |
| Moisture Sensitivity Level | MSL 3 |
| Peak Reflow Temperature | 260 C |
| Maximum Time at Peak Reflow Temperature | 40 s |
| Terminal Finish | Tin |
| JESD Code | e3 |
Guia de Configuração de Pinos do MC9S08PA4AVSC soic-8
Configuração de pinos para MC9S08PA4AVSC (pacote soic-8). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MC9S08PA4AVSC.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MC9S08PA4AVSC é adequado para 6 aplicaçãos: Compact Motor Controller, Appliance Control Module, Industrial Sensor Interface, Cost-Sensitive Embedded Product, Small Timing and Control System, Programmable Logic Controller.
Compact Motor Controller
MC9S08PA4AVSC fits compact motor-control designs that require more code space than the smallest S08PA devices while retaining a low component count. Its 20 MHz S08 CPU executes control logic quickly enough for responsive supervisory tasks, while the integrated flex timer supports deterministic timing for motor-control functions. The ADC can sample feedback signals, the analog comparator can detect thresholds, and EEPROM can retain calibration values without an external memory device. Using the 2.7 V to 5.5 V operating range, the controller can operate from regulated 3.3 V or 5 V rails. Final design work must confirm motor-drive topology, current limits, protection behavior, and timing margins.
Recomendado
Appliance Control Module
MC9S08PA4AVSC is suitable for appliance-control modules that coordinate buttons, indicators, sensors, and small actuators within an economical embedded platform. Its 4 KB of flash provides substantially more program storage than a 1 KB-class MCU, supporting state machines, diagnostic logic, and product-specific behavior. Integrated EEPROM allows settings or calibration data to survive power cycles, and the ADC simplifies analog front-end implementation. The eight-pin SOIC-8 package also offers an attractive assembly option for mixed-technology control boards. Engineers should assign the multiplexed pins from the NXP pin table, provide the recommended bypass capacitors, and verify that the selected timer and I/O functions do not conflict with the appliance’s safety requirements.
Recomendado
Industrial Sensor Interface
MC9S08PA4AVSC can serve as the local controller for a compact industrial sensor interface because it combines a 20 MHz S08 processor, ADC, comparator, timer resources, and EEPROM in one package. The 4 KB program memory supports calibration tables, filtering, diagnostics, and communication handling, while the 2.7 V to 5.5 V supply range accommodates common 3.3 V and 5 V industrial rails. The integrated LDO can simplify the local power arrangement when the architecture is designed around its input and output requirements. For reliable deployment, protect analog inputs from transients, maintain clean reference routing, and validate the sensor interface across the full industrial temperature and electromagnetic-interference environment required by the product.
Recomendado
Cost-Sensitive Embedded Product
MC9S08PA4AVSC is appropriate for a cost-sensitive embedded product whose firmware, analog measurement, and control functions must fit within 4 KB of program memory. The 8-bit S08 architecture avoids unnecessary processing complexity, while the integrated EEPROM, ADC, comparator, timers, and LDO reduce the number of external devices. At up to 20 MHz, the processor provides useful throughput for protocol handling, state-machine execution, and supervisory logic. Its SOIC-8 package supports automated assembly and accommodates production designs that prefer a less dense footprint. Designers should build in flash margin for revisions, use the EEPROM only for appropriate endurance and data-retention workloads, and validate the power budget at the lowest intended input voltage.
Recomendado
Small Timing and Control System
MC9S08PA4AVSC is well matched to a small timing and control system requiring deterministic embedded execution without a large processor. The S08PA flex timer provides a dedicated timing resource, while support for as many as 40 interrupt or reset sources and four nested interrupt levels allows time-critical tasks to be organized systematically. The 4 KB flash budget is suitable for control sequences, event handling, and diagnostics when firmware is kept disciplined. A 3.3 V or 5 V regulated architecture can be supported within the stated 2.7 V to 5.5 V range. The design should define interrupt priorities before implementation, test worst-case interrupt latency, and confirm that timing margins remain adequate across the intended voltage and temperature conditions.
Recomendado
Programmable Logic Controller
MC9S08PA4AVSC can support a small programmable logic controller when the required functions are limited to a handful of digital inputs, outputs, timing operations, and simple analog supervision. Its 20 MHz processing rate allows responsive ladder-style or state-machine execution, and the integrated EEPROM can retain configuration values and production data. The ADC and comparator extend the controller beyond purely digital I/O, while the eight-pin package limits available pin multiplexing and makes careful signal assignment essential. It is most appropriate for compact, cost-sensitive machines rather than large safety-critical PLCs. Engineering validation should include input filtering, output drive limits, watchdog behavior, brownout handling, isolation requirements, and environmental testing appropriate to the machine environment.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MC9S08PA4AVSC — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MC9S08PA4VAG | MC9S08PA2VAG | MC9S08PA1VAG |
|---|---|---|---|---|
| Package | SOIC-8 | SOIC-8 | SOIC-8 | SOIC-8 |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| CPU Architecture | 8-bit S08 | 8-bit S08 | 8-bit S08 | 8-bit S08 |
| Maximum Bus Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Program Flash | 4 KB | 4 KB | 2 KB | 1 KB |
| Operating Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| EEPROM | Integrated | Integrated | Integrated | Integrated |
| Integrated Analog Resources | ADC and analog comparator | ADC and analog comparator | ADC and analog comparator | ADC and analog comparator |
| Interrupt and Reset Sources | Up to 40 | Up to 40 | Up to 40 | Up to 40 |
| Integrated Regulator | Integrated LDO | Integrated LDO | Integrated LDO | Integrated LDO |
Principais diferenciais
- Largest confirmed flash capacity among the listed S08PA alternatives (vs MC9S08PA2VAG)
- Greater firmware-growth margin than the 1 KB-class family option (vs MC9S08PA1VAG)
- Confirmed 20 MHz operating class across the same-family alternatives (vs MC9S08PA4VAG)
Notas de projeto
Design the power tree around the 2.7 V to 5.5 V operating range and the integrated regulator architecture. Place the regulator input and output bypass capacitors at the pins identified by the NXP MC9S08PA4 manufacturer datasheet, using the required capacitance and voltage rating. Account for the voltage drop across the internal LDO when calculating core-current headroom, and verify brownout behavior against the minimum rail voltage used in the product.
Assign every signal using the eight-pin package description rather than relying on a generic S08 schematic. Keep the programming interface and reset path accessible for manufacturing and field service, preserve the pin-1 orientation of the SOIC-8 footprint, and provide adequate clearance between the MCU and switching or inductive components. A compact layout reduces trace resistance and noise pickup, but routing savings should not compromise debug access.
The largest substitution risk is treating different S08PA memory variants as exact equivalents. MC9S08PA4VAG retains the 4 KB flash class, whereas MC9S08PA2VAG and MC9S08PA1VAG reduce program memory by 50% and 75%, respectively. Verify the compiled image size, bootloader assumptions, EEPROM usage, and peripheral configuration before accepting a lower-flash replacement for an existing MC9S08PA4AVSC design.
Estimate internal power dissipation from the core current, I/O loading, analog activity, and the difference between the external supply and the internal regulated voltage. The NXP manufacturer datasheet states that I/O power dissipation is normally smaller than dissipation in the logic and voltage-regulator circuits, so regulator losses can dominate. Validate the calculation at the highest intended operating temperature and the maximum production load rather than relying only on nominal conditions.
Informações de conformidade
The ordering information identifies JESD code e3 and tin termination, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not present in the cited results.