MC9S12E64CPVE - 16-Bit 25MHz 64KB MCU | NXP | Automotive
N.º de pieza: MC9S12E64CPVE ✗ Fin de vida| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
MC9S12E64CPVE Descripción general
An HCS12 microcontroller is a 16-bit embedded controller combining a processor core, Flash program memory, data memory, timers, serial interfaces, and digital input/output resources on one integrated circuit. Its full 16-bit data path supports control-oriented software while retaining familiar general-purpose MCU integration. The MC9S12E family includes a phase-locked loop, allowing clock frequency and power-consumption requirements to be adjusted for different operating conditions.
The MC9S12E64CPVE provides 64 KB of Flash storage for firmware, 16-bit processing, and a documented maximum core frequency of 25 MHz according to the distributor records supplied for this part. It also uses an on-chip bandgap-based voltage regulator to generate the regulated internal supply required by the MCU. This integration supports a compact embedded implementation while providing a familiar set of peripherals for automotive and industrial control.
The 112-LQFP package provides ample connection density for external sensing, actuation, communication, and debug circuitry. Its 20 mm by 20 mm gull-wing format is appropriate for multilayer PCB designs that need a larger pin count than smaller QFP packages. Because the exact peripheral map and electrical limits are not fully present in the supplied web snippets, use the MC9S12E family user guide and the manufacturer product page for authoritative pin, timing, memory-map, and electrical details.
Typical applications include body and vehicle control modules, motor and actuator controllers, sensor-interface equipment, industrial automation controllers, and embedded automotive subsystems. The device is marked NRND by the NXP product-page search result, so procurement should account for lifecycle planning and verify availability before committing to a new design.
Designers should confirm clock, power, reset, debug, peripheral, and pin multiplexing requirements against the MC9S12E documentation. The 112-LQFP footprint requires careful fanout and decoupling, while firmware should use the documented clock and peripheral initialization sequence. This page combines verified distributor descriptions, lifecycle information, package details, and procurement-oriented engineering guidance.
Alternativas directas para MC9S12E64CPVE — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MC9S12E64CPVE (mismo factor de forma y huella) — difiere en ADC, Package, Core, Number of I/O, RAM Size.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
MC9S12D64CPVE
✅ Sustitución directa✓ En stock
$11.5 / unidad
Ver hoja de datos →MC9S12E64CPVE Valores máximos y características eléctricas
| Product Type | 16-bit HCS12 microcontroller |
| Core | HCS12 |
| Maximum Core Frequency | 25 MHz |
| Flash Memory | 64 KB |
| Data Bus | 16-bit |
| Encapsulado | 112-pin LQFP, 20 mm x 20 mm |
| Package Type | LQFP |
| Terminal Form | Gull wing |
| Temperature Grade | Industrial |
| Phase-Locked Loop | On-chip PLL |
| Voltage Regulator | On-chip bandgap-based voltage regulator |
| Product Series | HCS12 / MC9S12E |
| Manufacturer | NXP Semiconductors |
| Estado del ciclo de vida | NRND |
Guía de configuración de pines de MC9S12E64CPVE lqfp
Configuración de pines para MC9S12E64CPVE (encapsulado lqfp). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para MC9S12E64CPVE.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MC9S12E64CPVE es adecuado para 7 aplicacións: Automotive Body Control, Motor and Actuator Control, Industrial Sensor Interface, Automotive Communication Gateway, Embedded Instrumentation, Automotive Lighting and Sequential Control, Legacy Platform Maintenance.
Automotive Body Control
The MC9S12E64CPVE is suitable as a centralized controller for vehicle body functions because it combines a 16-bit HCS12 core, 25 MHz operation, and 64 KB of Flash in a 112-pin LQFP package. The larger pin count can support discrete input conditioning, output drivers, sensors, and communication links around a body-control module. Its on-chip PLL allows clocking to be matched to the processing requirement rather than operating continuously at the maximum frequency. Because the exact MPN is NRND, existing automotive platforms should verify production allocation, qualification status, and long-term supply before a new design release.
Recomendado
Motor and Actuator Control
The MC9S12E64CPVE can be evaluated for motor, solenoid, relay, or actuator control where a 16-bit control loop and several external connections are useful. Its 25 MHz core provides a defined performance target for responsive control logic, while 64 KB of Flash stores application firmware and state-machine code. The 112-LQFP package offers many pins for position inputs, current or voltage sensing, driver enables, fault signals, and communications. The design still requires verified PWM, timer, ADC, interrupt, and electrical-limit details from the family documentation before selecting this MCU for a safety- or timing-critical actuator.
Recomendado
Industrial Sensor Interface
MC9S12E64CPVE is a reasonable platform candidate for an industrial sensor-interface controller that gathers digital and analog-related signals and coordinates downstream outputs. The verified 16-bit HCS12 architecture, 64 KB Flash capacity, and 112-pin package provide a useful foundation for multiple sensors, status indicators, and communication transceivers. Its PLL can support a clocking plan that balances processing performance and power consumption. For an actual design, confirm ADC, timer, communication, pin-mux, electrical, and noise specifications in the exact family documentation rather than treating general MCU attributes as sufficient.
Recomendado
Automotive Communication Gateway
The MC9S12E64CPVE may suit a communication gateway or distributed control node when a 16-bit MCU and 64 KB of firmware memory are sufficient. The 112-LQFP package can expose several serial or digital interfaces to sensors, actuators, and other controllers, provided those peripherals are present and correctly configured for the exact device. The on-chip PLL supports controlled clock distribution, and the 25 MHz core provides a defined baseline for protocol and supervisory tasks. Because the verified material does not enumerate the complete peripheral set or protocol support, interface selection must be based on the official MC9S12E documentation.
Recomendado
Embedded Instrumentation
MC9S12E64CPVE can be considered for embedded instrumentation where control logic, data acquisition, local storage of firmware, and multiple external connections are required. Its 16-bit architecture and 25 MHz core are suitable for general embedded processing, while 64 KB of Flash supports a dedicated instrument application. The 112-pin package provides more I/O flexibility than a small leadless package. The device should not be selected for a measurement-control design until its ADC, timer, reference, input-voltage, accuracy, and calibration characteristics are verified in the exact datasheet.
Recomendado
Automotive Lighting and Sequential Control
The MC9S12E64CPVE may be evaluated for lighting modules, sequential indicators, and distributed relay logic because it provides 64 KB of Flash and a 112-pin LQFP interface package for external drivers and diagnostic signals. A 25 MHz 16-bit core can support state-machine and timing functions, while the PLL allows clock configuration to be adjusted. In a production design, verify the exact PWM, timer, diagnostic, supply, and automotive qualification requirements. Since the part is marked NRND in the supplied NXP result, maintenance programs may find it more suitable than newly launched vehicle platforms unless NXP confirms continued availability.
Recomendado
Legacy Platform Maintenance
MC9S12E64CPVE is primarily relevant to maintenance, repair, and previously released platforms because the verified NXP search result marks it NRND. An existing design can benefit from its known 16-bit HCS12 architecture, 25 MHz class, 64 KB Flash configuration, and 112-LQFP package when those details match the original assembly. For repair procurement, verify the exact package marking, revision, temperature grade, and supply authenticity. For redesigns, treat a different MCU as a potential conversion project unless manufacturer documentation explicitly confirms pin-to-pin and software compatibility.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MC9S12E64CPVE — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MC9S12D64CPVE |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Package | 112-LQFP, 20 mm x 20 mm | 112-LQFP |
| Core Architecture | HCS12, 16-bit | HCS12, 16-bit |
| Core Frequency | 25 MHz | 25 MHz |
| Flash Memory | 64 KB | 64 KB |
| Data Bus | 16-bit | 16-bit |
| Verified Drop-In Status | Target device | Headline package, core, frequency, and Flash match; full compatibility not verified |
Diferenciadores clave
- Verified target identity and package format (frente a MC9S12D64CPVE)
- Target has an identified on-chip PLL and bandgap-based regulator (frente a MC9S12D64CPVE)
- Target is documented as an industrial-grade device (frente a MC9S12D64CPVE)
Notas de diseño
Use the exact 112-LQFP footprint from the MC9S12E documentation and preserve the pin-1 orientation, pad lengths, solder-mask geometry, and courtyard clearances. Route power and ground planes before fine-pitch signal escape routing, then place required decoupling capacitors close to the relevant supply pins. A 20 mm by 20 mm gull-wing package is large enough for orderly power distribution, but incorrect pad geometry or fanout can prevent assembly or create hidden shorts during rework.
Confirm the exact supply-voltage range, regulator architecture, startup sequence, reset requirements, and decoupling values from the official MC9S12E documentation before applying power. The supplied data confirms an on-chip bandgap-based regulator but does not provide its electrical limits. Do not infer supply values from the 2.5 V, 3.3 V, or 5 V phrases found in an aggregator snippet; validate the exact device revision and board requirements first.
Separate sensitive clock, reset, and communication routes from high-current switching paths where possible. Follow the device's documented debug and programming interface, and maintain a consistent ground reference across the MCU, clock components, memory, and external drivers. Because the verified information does not include the complete pinout or peripheral map, do not finalize multiplexing or escape routing until the exact datasheet and package drawing have been cross-checked.
Do not treat a matching package name and a 64 KB Flash headline as proof of a drop-in replacement. MC9S12D64CPVE is the only verified comparison candidate in the supplied data, and its complete electrical, memory-map, peripheral, timing, and software compatibility is not established. For an existing product, verify the original MCU marking, package, revision, temperature grade, and programmer configuration before substitution.
Información de cumplimiento
The supplied verified web data does not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for MC9S12E64CPVE. The device is associated with automotive-oriented family descriptions, but qualification must be confirmed for the exact ordering code.
