MCF5270CVM150-FR - ColdFire V2 32-bit 150MHz MCU | NXP
N.º de pieza: MCF5270CVM150-FR ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $22.28 | $22,28 |
| 10 | $21.5 | $215,00 |
| 100 | $20.75 | $2.075,00 |
| 500 | $19.9 | $9.950,00 |
| 1.000 | $18.95 | $18.950,00 |
MCF5270CVM150-FR Descripción general
A microcontroller (MCU) is an integrated circuit that combines a processor core, memory, and peripherals in a single chip to control embedded systems. Within the microprocessor hierarchy, the ColdFire V2 family sits above basic microcontrollers, delivering general-purpose computing power for connected devices, and the MCF527x sub-family is optimized for cost-sensitive, power-conscious designs that require significant control processing for file management, connectivity, and data buffering.
Key features include the proven ColdFire V2 core at 150 MHz for deterministic embedded control, an integrated Ethernet MAC for networked industrial and IoT nodes, an external bus interface for attaching flash, SDRAM, or other memory to offset the ROMless architecture, and a compact 196 MAPBGA footprint suited to space-constrained boards.
Architecturally, the device couples the ColdFire V2 instruction set with DMA-driven data movement, reducing core overhead in buffering-heavy workloads such as packet forwarding and serial-to-network bridging. Code and data are held in external memory via the EBI, giving designers full flexibility to size program storage per application.
Typical applications include industrial control and embedded automation, networked IoT devices and gateways, motor control and metering systems, and low-power board designs requiring Ethernet connectivity.
Design consideration: because the part is ROMless and needs an external boot memory, verify EBI timing margin at 150 MHz and provide proper decoupling for the 1.5 V core rail during layout.
This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet. Pricing references are as of 2026-10-18.
Alternativas directas para MCF5270CVM150-FR — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MCF5270CVM150-FR (mismo factor de forma y huella) — difiere en Connectivity, Package, Peripherals, RAM Size, Part Status.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
MCF5271CVM150
✅ Sustitución directa✓ En stock
$19.85 / unidad
Ver hoja de datos →MCF5272CVM150
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MCF5234CVM150J
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$17.1 / unidad
Ver hoja de datos →MCF5235CVM150J
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$18.4 / unidad
Ver hoja de datos →MCF5280CVM66J
✅ Sustitución directa✓ En stock
$0.8 / unidad
Ver hoja de datos →MCF5270CVM150-FR Valores máximos y características eléctricas
| Core Processor | ColdFire V2 |
| Core Size | 32-Bit |
| Number of Cores | 1 (Single-Core) |
| Maximum Clock Speed | 150 MHz |
| Program Memory Type | ROMless |
| RAM Size | 64K x 8 |
| Supply Voltage (Vcc/Vdd) | 1.4 V to 1.6 V |
| Connectivity | EBI/EMI, Ethernet, I2C, SPI, UART/USART |
| Peripherals | DMA, WDT |
| Number of I/O | 97 |
| Data Converters | None |
| Oscillator Type | External |
| Temperatura de funcionamiento | -40C to +85C |
| Encapsulado | 196-PBGA (15x15 mm) MAPBGA |
| Tipo de montaje | Surface Mount |
| Series | MCF527x |
| Part Status | Not For New Designs (per third-party listing) |
Guía de configuración de pines de MCF5270CVM150-FR 196-pbga (15x15 mm) mapbga
Configuración de pines para MCF5270CVM150-FR (encapsulado 196-pbga (15x15 mm) mapbga). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para MCF5270CVM150-FR.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MCF5270CVM150-FR es adecuado para 6 aplicacións: Industrial Control and Automation, Networked IoT Devices and Gateways, Motor Control Systems, Energy Metering, Embedded Networking and File Management, Low-Power Board Designs and Legacy Sustainment.
Industrial Control and Automation
The MCF5270CVM150-FR fits industrial control because its 150 MHz ColdFire V2 core provides deterministic 32-bit processing while the integrated EBI/EMI, UART, SPI, and I2C interfaces connect PLC I/O modules, encoders, and HMI peripherals. The -40C to +85C rating covers unconditioned factory environments, and DMA offloads data buffering from the core in polling-heavy control loops. Running program code from external flash via the EBI allows firmware images to be sized and field-updated per machine variant. Trade-off: legacy lifecycle status makes it best suited to sustaining existing installations rather than brand-new controller platforms.
Recomendado
Networked IoT Devices and Gateways
For IoT nodes that need wired connectivity, the MCF5270CVM150-FR integrates a 10/100 Ethernet controller alongside the ColdFire V2 core, enabling a single-chip gateway between field devices and a network. With 97 GPIO, SPI, I2C, and UART, it aggregates sensor data and forwards packets using DMA-driven buffering that minimizes CPU overhead at 150 MHz. External program memory via the EBI permits large TCP/IP stacks and OTA update images. Power-conscious designs benefit from the 1.5 V core rail. Trade-off: the ROMless architecture and legacy status mean new gateway designs should also evaluate NXP's current ARM-based families.
Recomendado
Motor Control Systems
Motor control benefits from the MCF5270CVM150-FR's combination of deterministic ColdFire V2 execution at 150 MHz, general-purpose timers, DMA for PWM-related data movement, and fast SPI for connecting gate drivers and current-sense ADCs (the part has no internal data converters, so external ADCs over SPI handle current sampling). The 97 GPIO and external bus interface support encoder feedback and supervisory logic, while the watchdog timer enforces failsafe shutdown. Industrial ambient ratings (-40C to +85C) suit drives in machinery. Trade-off: lacking on-chip ADC/PWM-dedicated modules of dedicated motor MCUs, it is best in supervisory or mid-complexity drive roles.
Recomendado
Energy Metering
In metering, the MCF5270CVM150-FR provides the computing headroom for metering firmware, communication stacks, and data logging at 150 MHz, while external memory attached through the EBI holds tariff tables and event logs. The UART, I2C, and SPI interfaces connect metrology front-ends and communication modules, and the Ethernet MAC supports advanced metering infrastructure backhaul. Operation from -40C to +85C matches outdoor meter enclosures, and the 1.5 V core helps meet board-level power budgets. Trade-off: the absence of internal data converters requires an external metrology ADC, and long product lifetimes should account for the family's legacy status.
Recomendado
Embedded Networking and File Management
NXP positions the MCF527x explicitly for applications requiring significant control processing for file management, connectivity, and data buffering. The MCF5270CVM150-FR's EBI supports attaching mass-storage controllers and DRAM for file systems, while DMA channels move data between UART/SPI/Ethernet peripherals and buffer memory without core intervention. This makes the part effective in serial-to-Ethernet converters, embedded print servers, and protocol bridges. The 150 MHz core handles stacks such as FTP or SMB adequately for cost-sensitive equipment. Trade-off: throughput is bounded by the external bus, so bus loading analysis is required for buffer-heavy workloads.
Recomendado
Low-Power Board Designs and Legacy Sustainment
The 1.4 V to 1.6 V core supply and 196 MAPBGA 15x15 mm footprint allow dense, power-conscious board designs, which is why the MCF527x remains in legacy embedded platforms. Existing products built on the ColdFire V2 code base can be sustained by continuing to source the MCF5270CVM150-FR through authorized residual channels such as Rochester Electronics. Last-time-buy planning, retained firmware toolchains (CodeWarrior), and second-source brokered stock give manufacturers continuity. Trade-off: for genuinely new low-power designs, NXP's current Cortex-M families offer modern process nodes with far lower active and standby currents.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MCF5270CVM150-FR — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MCF5271CVM150 | MCF5272CVM150 | MCF5234CVM150J | MCF5280CVM66J |
|---|---|---|---|---|---|
| Package | 196-PBGA (15x15) | 196-PBGA (15x15) - same | 196-PBGA (15x15) - same | 196-PBGA (15x15) - same | 196-PBGA (15x15) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core / Architecture | ColdFire V2, 32-bit | ColdFire V2, 32-bit | ColdFire V2, 32-bit | ColdFire V2, 32-bit | ColdFire V2, 32-bit |
| Maximum Speed | 150 MHz | 150 MHz | 150 MHz | 150 MHz | 66 MHz |
| Program Memory | ROMless (external via EBI) | ROMless (external via EBI) | ROMless with integrated flash (verify per variant) | ROMless (external) | Integrated flash (verify per variant) |
| Ethernet | Yes (10/100 MAC) | Yes | Yes | Yes | Yes |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Lifecycle Positioning | Available, marked Not For New Designs by some listings | Available (legacy family) | Available (legacy family) | Available (legacy family) | Available (legacy family) |
Diferenciadores clave
- Highest clock speed in this comparison set (frente a MCF5280CVM66J)
- Explicit data-buffering/filmanagement optimization (frente a MCF5272CVM150)
- Dedicated CAN for industrial buses (frente a MCF5234CVM150J)
Notas de diseño
The core supply must stay within 1.4 V to 1.6 V (nominal 1.5 V). Provide a dedicated low-noise rail with local bulk (10 uF) plus high-frequency (0.1 uF) decoupling at each supply ball group of the 196 MAPBGA. Observe any I/O and PLL rail sequencing requirements documented in the MCF527x hardware specification; incorrect sequencing can latch up I/O rings. Budget core current at full 150 MHz operation per the datasheet power tables rather than assuming a fixed draw.
Because the part is ROMless, boot code is fetched over the EBI - route flash/SDRAM bus traces as matched-length groups where possible and keep stubs off high-speed address/data lines. The 15x15 mm BGA requires via-in-pad or dogbone fanout on a minimum 6-layer stackup for clean power/ground returns. Verify ball-map multiplexing against the official hardware specification; do not assume MCF527x variants share identical ball functions.
The listing status 'Not For New Designs' means NXP's roadmap no longer features this family; plan last-time-buy quantities and retain ColdFire toolchain (e.g., CodeWarrior) licenses. The external oscillator requirement means clock quality depends on your oscillator choice - use a crystal-compatible oscillator with appropriate jitter for Ethernet. Confirm the -FR suffix packaging (tape-and-reel vs tray) matches your assembly line before ordering.
Información de cumplimiento
Compliance data was not present in the provided web data. AEC-Q100 automotive qualification is not claimed for this MCF527x industrial part. Verify RoHS/REACH status on the official NXP product page before procurement.
