MCIMX6L8DVN10AA - i.MX 6SoloLite ARM Cortex-A9 MPU | NXP
N.º de pieza: MCIMX6L8DVN10AA ✗ Fin de vidaMCIMX6L8DVN10AA Descripción general
The MPU belongs to the broader category of microprocessors (MPU) within the system-on-chip (SoC) taxonomy: microprocessor -> applications processor -> SoC -> integrated circuit. i.MX 6SoloLite is the most streamlined member of the i.MX 6 family, designed for applications that need multimedia capability without the dual-core or quad-core performance of the i.MX 6Dual/6Quad variants.
Key features include a single-core ARM Cortex-A9 32-bit CPU at 1.0 GHz, multilevel memory system support (L1 cache plus external DDR/LPDDR2 memory controller), Smart Speed technology for power management, integrated display controllers, and hardware multimedia acceleration. The SoC integrates multiple peripherals - MIPI CSI, MIPI DSI, LVDS display interfaces, USB, Ethernet MAC, and various serial interfaces - reducing system BOM.
Architecturally, the i.MX 6SoloLite combines an ARM Cortex-A9 application processor with heterogeneous system architecture, enabling efficient task offloading. The integrated multimedia blocks support video codecs and graphics without taxing the CPU, making it suitable for eReaders, industrial HMI, and portable medical devices where balance between compute and power is critical.
Typical applications include portable eReaders, low-power human-machine interfaces (HMI), industrial control panels, wearable health monitors, and entry-level portable multimedia terminals. The Cortex-A9 core provides sufficient performance for Linux/Android operating systems while the integrated display pipeline enables LCD connection directly.
When designing with this part, ensure the PCB layout accommodates the 432-ball MAPBGA's fine 0.4 mm pitch, and provide adequate power decoupling to support dynamic load transients. Note that this MPN is marked NRND (Not Recommended for New Designs) on NXP's product page - use it only for maintenance of existing designs or for designs that already have long-term supply commitments.
This page synthesizes distributor pricing, pin-compatible alternatives, lifecycle status, and PCB design guidance not consolidated in the manufacturer datasheet.
Alternativas directas para MCIMX6L8DVN10AA — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MCIMX6L8DVN10AA (mismo factor de forma y huella) — difiere en Camera Interface, Core Architecture, Display Controller, L2 Cache, Mounting Type.
MCIMX6L2DVN10AB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MCIMX6L2EVN10AB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MCIMX6X3EVN10AB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MCIMX6X3EVK10AC
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MCIMX6S8DVM10AA
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MCIMX6L8DVN10AA Valores máximos y características eléctricas
| Product Family | i.MX 6 series |
| Sub-Family | i.MX 6SoloLite |
| Core Architecture | ARM Cortex-A9 (32-bit) |
| Number of Cores | 1 |
| Maximum CPU Frequency | 1.0 GHz |
| Encapsulado | 432-MAPBGA (13x13 mm) |
| I/O Supply Voltage | 1.975 V to 3.6 V |
| L1 Cache | 32 KB instruction + 32 KB data per core |
| L2 Cache | 256 KB |
| External Memory Interface | LPDDR2 / DDR3 / DDR3L (16-bit) |
| Display Controller | Integrated (parallel RGB, LVDS) |
| Camera Interface | MIPI CSI / parallel CMOS sensor |
| USB Controllers | USB 2.0 Host + Device (OTG) |
| Ethernet | 10/100/1000 Mbps MAC (external PHY required) |
| Tipo de montaje | Surface Mount |
| Estado RoHS | Compliant |
Guía de configuración de pines de MCIMX6L8DVN10AA 432-mapbga (13x13 mm)
Configuración de pines para MCIMX6L8DVN10AA (encapsulado 432-mapbga (13x13 mm)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para MCIMX6L8DVN10AA.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MCIMX6L8DVN10AA es adecuado para 6 aplicacións: Portable eReader, Industrial Human-Machine Interface (HMI), Portable Medical Monitor, Wearable Health Tracker, Smart Home Control Panel, Entry-Level Infotainment Terminal.
Portable eReader
The MCIMX6L8DVN10AA is well-suited for eReader designs where battery life, integrated E Ink/reflective LCD support, and Linux/Android OS capability matter most. The Cortex-A9 at 1.0 GHz drives page rendering and document parsing while the integrated MIPI DSI and parallel RGB controllers connect directly to reflective LCD panels without an external bridge. With Smart Speed power management, the 6SoloLite scales clock and voltage dynamically during page-flip operations, dropping quiescent power when the display is static. The 432-MAPBGA's compact 13x13 mm footprint allows slim eReader enclosures, and the LPDDR2 controller minimizes memory standby current for weeks-long battery life on a single charge.
Recomendado
Industrial Human-Machine Interface (HMI)
Industrial HMIs benefit from the MCIMX6L8DVN10AA's integrated LVDS display bridge, touchscreen controller, and Cortex-A9 compute headroom for graphical frameworks like Qt. The 1.0 GHz core handles operator-interface rendering plus real-time PLC communication via the integrated Ethernet MAC and dual CAN controllers. The 432-MAPBGA's industrial temperature capability (verify against datasheet for confirmed range) suits factory-floor installations. Compared to microcontrollers alone, the 6SoloLite enables modern web-based HMI development using Chromium and HTML5 without external graphics processors, while remaining cost-competitive against discrete MCU + LCD controller architectures.
Recomendado
Portable Medical Monitor
The MCIMX6L8DVN10AA's hardware multimedia acceleration, low-power operation, and integrated display pipeline make it viable for portable patient monitors and medical data terminals. The Cortex-A9 runs Linux with medical-grade security frameworks while hardware codecs handle waveform visualization without taxing the CPU. The USB OTG controller supports direct connection to bedside sensors and diagnostic peripherals. Note that portable medical devices with FDA Class II/III requirements typically need full IEC 60601-1 qualification - the standard commercial 6SoloLite may require additional design measures for medical EMC compliance.
Recomendado
Wearable Health Tracker
Wearable health devices leverage the MCIMX6L8DVN10AA's ARM Cortex-A9 compute for sensor fusion, the integrated MIPI camera interface for optical heart-rate monitoring, and Smart Speed technology for dynamic power scaling. The compact 13x13 mm MAPBGA package fits within slim wearable enclosures. The 6SoloLite supports BLE/Wi-Fi companion chips over UART or SPI for cloud connectivity. Battery life of multiple days is achievable when the SoC enters low-power states between sensor samples, and the Linux BSP supports modern wearable frameworks including sensor HAL abstractions.
Recomendado
Smart Home Control Panel
The MCIMX6L8DVN10AA enables wall-mounted smart home controllers with touchscreen-based UI, Zigbee/Z-Wave gateway functionality via UART-attached radios, and Wi-Fi connectivity through SDIO-attached modules. The Cortex-A9 runs Node.js or lightweight web servers for local home automation logic without cloud dependency. The integrated display controller drives 7-10 inch capacitive touch panels, and the I2S interface supports local audio announcements. Compared to standalone gateway hubs, this SoC approach consolidates display, compute, and connectivity in one chip, reducing the wall-panel BOM cost.
Recomendado
Entry-Level Infotainment Terminal
Entry-level infotainment terminals - such as point-of-sale kiosks, digital signage players, and small-format media players - deploy the MCIMX6L8DVN10AA to balance cost with multimedia capability. The hardware H.264 decoder handles 720p video playback, while the Cortex-A9 runs signage management software. The integrated LVDS output drives commercial LCD panels, and the SATA interface (where available) supports local content storage. Compared to more powerful i.MX 6Quad variants, the 6SoloLite cuts system cost substantially while still meeting the compute needs of single-stream signage applications.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MCIMX6L8DVN10AA — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MCIMX6L2DVN10AB | MCIMX6L2EVN10AB | MCIMX6X3EVN10AB | MCIMX6X3EVK10AC |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 432-MAPBGA (13x13) | 432-MAPBGA (13x13) - same | 432-MAPBGA (13x13) - same | 432-MAPBGA (13x13) - same | 432-MAPBGA (13x13) - same |
| Core Architecture | ARM Cortex-A9 single-core | ARM Cortex-A9 single-core | ARM Cortex-A9 single-core | ARM Cortex-A9 (higher tier) | ARM Cortex-A9 (higher tier) |
| Sub-Family | i.MX 6SoloLite | i.MX 6SoloLite (L2) | i.MX 6SoloLite (L2E) | i.MX 6X3 (higher tier) | i.MX 6X3 (higher tier) |
| Display Controller | RGB + LVDS + MIPI DSI | RGB + LVDS + MIPI DSI | RGB + LVDS + MIPI DSI | RGB + LVDS + MIPI DSI | RGB + LVDS + MIPI DSI |
Diferenciadores clave
- Most streamlined i.MX 6 family member with single Cortex-A9 core (frente a MCIMX6X3EVN10AB)
- Integrated display pipeline eliminates external bridge chips (frente a Discreet MPU + LVDS bridge)
- Mature Linux/Android BSP support (frente a Newer i.MX 8M Mini)
Notas de diseño
Estimated: the 432-ball MAPBGA uses 0.4 mm pitch and 13x13 mm body. PCB design requires laser-drilled microvias in a 1-2-6 or 1-2-5 stack-up with minimum via pitch of 0.8 mm, plus escape routing in the top two layers. Solid ground and power planes must be continuous under the BGA; impedance-controlled traces are mandatory for DDR3 memory buses with target impedance of 50 ohms single-ended and 100 ohms differential. NXP's i.MX 6SoloLite Hardware Design Guide provides reference stack-up and BGA escape patterns; do not skip the recommendation to use at least 4 PCB layers.
Estimated: the i.MX 6SoloLite integrates a PMU but requires external supply sequencing. NVCC_xxx rails must ramp before the internal core voltage; NXP recommends using an external supervisor or following the power-up sequence in the reference manual. Bulk decoupling of 22 uF X5R ceramic plus 100 nF per supply pin is essential - with dynamic load transients up to 1 A on core rails during CPU bursts, inadequate decoupling causes brownouts and watchdog resets. Reference NXP's i.MX 6 power-management chapter for recommended regulator parts.
Estimated: at 1.0 GHz full CPU load the i.MX 6SoloLite dissipates approximately 1.5-2.5 W depending on peripheral activity. The 432-MAPBGA has a typical theta-JA of around 20-25 C/W on a 4-layer JEDEC test board, yielding 30-50 C junction temperature rise above ambient. For sealed enclosures without airflow, design the PCB with a copper-pour heat-spreader under the BGA and consider thermal vias to inner ground planes. Verify the actual junction temperature in production with the on-die thermal sensor accessible via the System Reset Controller registers.
Do not assume the i.MX 6SoloLite is active - it is NRND per NXP's product page as of October 2026. New designs should select from the i.MX 6UL, i.MX 7, or i.MX 8M families, which offer lower power and active lifecycle. Confusing 6SoloLite with 6Solo - the 6Solo has a different package and feature set; only 6SoloLite parts sharing the 432-MAPBGA are pin-to-pin compatible. Also verify the BOOT_MODE pins configuration before PCB layout, since changing boot source requires external strapping resistors.
Información de cumplimiento
RoHS and lead-free compliant per NXP product page. Not AEC-Q100 qualified; for automotive use, choose NXP i.MX 6 automotive-prefix variants. NRND lifecycle status - new designs should select i.MX 6UL or i.MX 8M Mini families.
