Microchip Technology

MCP3422A7-E/SN - 18-Bit Dual-Channel ADC | Microchip

N.º de pieza: MCP3422A7-E/SN ✓ Activo
2.048 V Vdss 8-pin SOIC Package
MOQ: 1 |

MCP3422A7-E/SN Descripción general

Microchip Technology MCP3422A7-E/SN is a two-channel, 18-bit delta-sigma analog-to-digital converter with differential inputs, an on-board 2.048 V precision reference, and conversion rates up to 4 samples per second, packaged in an 8-pin SOIC. It converts differential analog signals into high-resolution digital codes for precision measurement and control systems.

A delta-sigma ADC is a voltage regulator–independent type of analog-to-digital converter that uses continuous-time delta-sigma modulation, digital filtering, and decimation to produce high-resolution results. The MCP3422 belongs to the ADC > delta-sigma ADC > analog-to-digital converter hierarchy and provides an I2C-compatible digital interface alongside its precision analog front end. Differential inputs help reject common-mode noise when the signal source and converter share a common reference point.

Key features include up to 18-bit resolution, two differential input channels, an integrated 2.048 V reference, and an input range of ±2.048 V. The device operates from 2.7 V to 5.5 V, supports a -40°C to 125°C temperature range, and is designed for low-noise measurement rather than high-speed waveform acquisition. Its 4 SPS rate suits temperature, pressure, load-cell, bridge-sensor, and slowly changing process measurements.

The internal conversion architecture emphasizes resolution and noise performance instead of sampling rate. The onboard reference establishes a stable full-scale differential measurement window, while the differential input arrangement supports common-mode rejection when paired with appropriate input conditioning. I2C communication reduces the number of data connections needed to retrieve conversion results from a host controller.

Typical applications include industrial pressure and temperature transmitters, strain-gauge and load-cell instrumentation, battery monitoring, laboratory measurement equipment, and precision analog sensor interfaces. Because the converter samples at up to 4 SPS, applications requiring waveform capture, audio bandwidth, or rapid transient analysis should select a faster ADC.

For PCB implementation, place the reference and input-conditioning components close to the converter, keep analog and digital return paths controlled, and use a clean low-noise supply. Differential input filtering must preserve the required source impedance and settling behavior. Use the manufacturer pin-description table when assigning PCB tracks and verify the SOIC-8 footprint against the selected assembly variant.

This product page combines manufacturer specifications, verified distributor availability, same-family drop-in candidates, comparison data, and practical PCB and signal-conditioning guidance to support faster component selection and design review.

Alternativas directas para MCP3422A7-E/SN — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MCP3422A7-E/SN (mismo factor de forma y huella) — difiere en Conversion Rate, Differential Input Range, Operating Temperature Range, Input Architecture, Resolution.

Microchip Technology
Conversion Rate: 3.75 samples/s
Resolution: Up to 18 bits
Microchip Technology
Conversion Rate: 3.75 samples/s
Differential Input Range: ±2.048 V
Operating Temperature Range: -40 °C to +125 °C
Microchip Technology
Conversion Rate: 4 sps
Differential Input Range: +/-2.048 V
Operating Temperature Range: -40 °C to +125 °C

MCP3422A0-E/SN

✅ Sustitución directa
Microchip Technology
📦 8-pin SOIC
Delta-sigma (ΔΣ) · Up to 18 bits · 2 channels · Differential · 2.048 V · ±2.048 V · 2.7 V to 5.5 V · Two-wire I2C-compatible serial interface

Consulte el precio

Ver hoja de datos →

MCP3422A1-E/SN

✅ Sustitución directa
Microchip Technology
📦 8-pin SOIC
Delta-sigma ADC · Up to 18 bits · 2 channels · Differential · 2.048 V · -2.048 V to +2.048 V · 3.75 samples/s · 3.3 V or 5 V

Consulte el precio

Ver hoja de datos →

MCP3422A4-E/SN

✅ Sustitución directa
Microchip Technology
📦 8-pin SOIC
18 bit · 2 channels · Differential input · Delta-sigma · 3.75 samples/s · 2.048 V · ±2.048 V · 2.7 V to 5.5 V

Consulte el precio

Ver hoja de datos →

MCP3422A5-E/SN

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Microchip Technology
📦 8-pin SOIC
Delta-sigma ADC · 18 bit · 2 channels · Differential inputs · 4 sps · 2.048 V · +/-2.048 V · 2.7 V to 5.5 V

Consulte el precio

Ver hoja de datos →

MCP3422A6-E/SN

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Microchip Technology
📦 8-pin SOIC
18 bit · 2 channels · 1 sigma-delta ADC · 3.75 samples/s · Differential · 2.048 V · ±2.048 V · 4.096 V/PGA

Consulte el precio

Ver hoja de datos →

MCP3422A7-E/SN Valores máximos y características eléctricas

ADC Type 18-bit delta-sigma ADC
Input Channels 2 channels
Input Architecture Differential inputs
Maximum Resolution 18 bits
Conversion Rate 4 samples/s
On-Board Reference Voltage 2.048 V
Differential Input Range ±2.048 V differential
Supply Voltage Range 2.7 V to 5.5 V
Nominal Supply Voltage 3.3 V or 5 V
Rango de temperatura de funcionamiento -40°C to +125°C
Digital Interface I2C
Encapsulado 8-pin SOIC
Tipo de montaje Surface mount

Guía de configuración de pines de MCP3422A7-E/SN 8-pin soic

Configuración de pines para MCP3422A7-E/SN (encapsulado 8-pin soic). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 8-pin soic para MCP3422A7-E/SN

No hay datos detallados de patillaje disponibles para MCP3422A7-E/SN.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MCP3422A7-E/SN es adecuado para 6 aplicacións: Industrial Pressure Transmitters, Temperature Sensing Systems, Load Cell and Strain Measurement, Battery Monitoring, Precision Laboratory Instruments, Process Control and Environmental Monitoring.

🏭

Industrial Pressure Transmitters

The MCP3422A7-E/SN fits industrial pressure transmitters that monitor slowly changing bridge or ratiometric sensor signals. Its differential inputs support a 2-channel measurement architecture, while up to 18-bit resolution preserves useful detail in the sensor output. The integrated 2.048 V reference provides a stable differential full-scale window of ±2.048 V, reducing the need for a separate reference in the signal chain. With a maximum conversion rate of 4 samples/s, the converter is appropriate for process pressure, hydraulic pressure, and slowly varying industrial measurements. Designers should use low-noise input amplifiers or passive networks with suitable common-mode range and source impedance, then filter the result before transmission through the I2C interface.

🌡️

Temperature Sensing Systems

The MCP3422A7-E/SN is appropriate for temperature monitoring systems whose sensor output changes more slowly than the converter's 4 samples/s limit. An 18-bit delta-sigma conversion can provide high numerical resolution for RTDs, thermistors, thermocouple conditioning outputs, and digital temperature sensors represented as analog voltages. The two differential channels allow related measurements to be acquired through the same converter, provided each signal remains within ±2.048 V differential and the common-mode voltage satisfies the device requirements. The onboard 2.048 V reference improves repeatability, while the I2C interface simplifies connection to a microcontroller. Engineers should distinguish numeric resolution from sensor accuracy and account for self-heating, excitation drift, and input-filter settling time in the final error budget.

⚖️

Load Cell and Strain Measurement

The MCP3422A7-E/SN is well matched to load-cell and strain-gauge systems because its differential inputs can receive a small bridge excitation centered around a common-mode voltage while rejecting shared noise. The integrated 2.048 V reference and up to 18-bit resolution support precise measurement of small changes in bridge output. Its two-channel arrangement can monitor a load cell and a reference or compensation channel when the analog front end is designed accordingly. The 4 samples/s maximum rate suits static loads, force testing, and quasi-static mechanics rather than impact waveforms. Practical implementation requires regulated bridge excitation, low-offset input components, matched routing, and an analog filter that does not introduce excessive settling delay between successive conversions.

🔋

Battery Monitoring

The MCP3422A7-E/SN can support low-rate battery monitoring when the cell or stack voltage is conditioned below the ±2.048 V differential input range. Two differential channels are useful for measuring a battery rail and a scaled auxiliary signal, provided both remain within the converter's input and common-mode limits. The up-to-18-bit conversion provides fine code resolution, which is valuable when detecting gradual changes in terminal voltage. The 2.048 V onboard reference supports repeatable measurements, and I2C allows a battery-management controller to retrieve results efficiently. Because the converter's maximum rate is 4 samples/s, it is better suited to state-of-charge monitoring than to transient protection or rapid short-circuit detection. A dedicated analog front end must handle high cell voltages safely.

🔬

Precision Laboratory Instruments

The MCP3422A7-E/SN is useful in laboratory and test equipment that records stable or slowly varying analog quantities with high numeric resolution. The 18-bit delta-sigma architecture, differential inputs, and 2.048 V internal reference are advantageous for programmable sources, resistance standards, and sensor reference measurements where low switching noise is more important than rapid acquisition. Two channels permit paired readings that can support ratiometric correction or simple differential diagnostics. The I2C interface reduces pin count in compact instrument architectures and can coexist with other addressable peripherals when the bus address plan is correct. Instrument designers should account for source settling, leakage, reference behavior, and the 4 samples/s limit when setting test times; these analog and timing considerations often determine final accuracy more than the nominal bit count.

🧩

Process Control and Environmental Monitoring

The MCP3422A7-E/SN supports environmental and process-control nodes that periodically report temperature, humidity, pressure, gas concentration, or flow-derived analog voltages. Two differential channels let a compact sensor node handle a measurement and compensation or reference signal through the same converter. Its maximum 4 samples/s rate is appropriate for slow environmental dynamics, while the 18-bit resolution and integrated reference support stable digital results over long measurement intervals. I2C communication is well suited to distributed sensor modules connected to a microcontroller or edge controller. The circuit should include protection appropriate to the sensor environment, anti-alias filtering, and a clean supply arrangement. Firmware should also account for the converter's acquisition sequence and reject samples affected by startup or input-settling transients.

What is the MCP3422A7-E/SN?
The MCP3422A7-E/SN is a two-channel, 18-bit delta-sigma ADC with differential inputs, an integrated 2.048 V reference, and an I2C interface in an 8-pin SOIC package. According to the Microchip Technology manufacturer datasheet, the device converts differential analog signals with a full-scale differential input range of ±2.048 V. Its maximum 4 SPS conversion rate makes it appropriate for precision sensors and slow-changing measurements rather than waveform capture.
What are the key specifications of MCP3422A7-E/SN that engineers should know?
The MCP3422A7-E/SN provides up to 18-bit resolution, two differential input channels, a 2.048 V onboard reference, and operation from 2.7 V to 5.5 V. The Microchip Technology manufacturer datasheet also specifies a conversion rate up to 4 samples/s and an operating temperature range of -40°C to +125°C. Its 8-pin SOIC package and I2C interface simplify integration with low-rate precision measurement systems.
What is the input voltage range of MCP3422A7-E/SN?
The MCP3422A7-E/SN supports a differential input range of ±2.048 V when its onboard 2.048 V reference is used. According to the Microchip Technology manufacturer datasheet, this corresponds to 4096 mV between the positive and negative input nodes. The converter supply range is separately specified as 2.7 V to 5.5 V, so the supply limit and measurable analog-input range must not be treated as the same parameter.
Where can I download the MCP3422A7-E/SN datasheet PDF?
The official MCP3422A7-E/SN technical information is available through the Microchip Technology MCP3422 product page linked on this page. The manufacturer product page provides the authoritative device description and links to its documentation. For pin assignments, electrical limits, timing, and application guidance, use the pin-description and electrical-characteristics tables in the manufacturer datasheet rather than relying solely on catalog summaries.
Where is the MCP3422A7-E/SN pinout?
The MCP3422A7-E/SN pinout is defined by the manufacturer datasheet for its 8-pin SOIC package. Use the pin-description table to map SCLK, ground, supply, analog input, and reference connections before routing the PCB. The package has 8 physical pins, and maintaining the manufacturer-specified input and reference layout is essential for preserving the low-noise performance expected from this precision delta-sigma ADC.
Is the MCP3422A7-E/SN suitable for temperature and pressure sensing?
Yes, the MCP3422A7-E/SN is well suited to temperature, pressure, load-cell, and other slowly changing sensor measurements. Its differential inputs, 18-bit resolution, integrated 2.048 V reference, and 4 SPS conversion rate provide useful precision without requiring a high-speed ADC. According to the Microchip Technology manufacturer datasheet, the device is a low-noise converter intended for precision measurement rather than high-bandwidth signal capture.
MCP3422A7-E/SN vs MCP3422A1-E/SN: which is better for a slow sensor measurement?
The MCP3422A7-E/SN is preferable when a maximum 4 SPS rate and up to 18-bit resolution meet the measurement bandwidth, while the MCP3422A1-E/SN offers a different conversion-rate option in the same 8-pin SOIC family. According to Microchip Technology family documentation, both devices provide two differential channels and the integrated 2.048 V reference. The selection should be based on required sampling interval and complete timing specifications.
What is the difference between MCP3422A7-E/SN and MCP3422A4-E/SN?
Both MCP3422A7-E/SN and MCP3422A4-E/SN belong to the same two-channel, 18-bit MCP3422 family and use an 8-pin SOIC package, but they target different conversion-rate options. The A7 variant supports up to 4 SPS, as stated by the manufacturer and distributor records, whereas the A4 conversion-rate details should be confirmed in its datasheet. Both provide differential inputs and the onboard 2.048 V reference.
When should I choose MCP3422A7-E/SN over another MCP3422 variant?
Choose the MCP3422A7-E/SN when the application can be sampled at no more than 4 samples/s and benefits from the family's high-resolution conversion and integrated reference. The MCP3422A0-E/SN, MCP3422A1-E/SN, and MCP3422A4-E/SN provide alternative conversion-rate choices in the same family. Confirm the required update interval, input bandwidth, timing, and acquisition behavior before finalizing the exact variant.
Is MCP3422A7-E/SN suitable for a 50/60 Hz mains-frequency measurement?
The MCP3422A7-E/SN can measure a slowly varying or repeatedly sampled voltage, but its 4 samples/s rate makes it unsuitable for reconstructing a 50/60 Hz waveform. The conversion process must complete before the next measurement is requested, and input filtering will alter the response at high frequency. For waveform quality, choose a faster ADC; for RMS or slow-envelope measurements, use appropriate anti-alias and line-frequency filtering.
What can replace MCP3422A7-E/SN?
The closest same-family drop-in candidates are MCP3422A0-E/SN, MCP3422A1-E/SN, MCP3422A4-E/SN, MCP3422A5-E/SN, and MCP3422A6-E/SN, all in the 8-pin SOIC MCP3422 family. Their conversion-rate options differ, so replacement is appropriate only when the sampling interval remains acceptable. Verify the complete datasheet, timing, and acquisition procedure rather than relying on package identity alone.
What is the best Microchip equivalent for MCP3422A7-E/SN?
The best Microchip-family equivalent depends primarily on the required conversion interval. MCP3422A0-E/SN, MCP3422A1-E/SN, MCP3422A4-E/SN, MCP3422A5-E/SN, and MCP3422A6-E/SN retain the 8-pin SOIC format and two-channel differential architecture. The MCP3422A7-E/SN itself remains the direct choice when its 4 SPS maximum conversion rate and acquisition behavior satisfy the design.
Can a cross-brand ADC directly replace MCP3422A7-E/SN?
A cross-brand part should not be treated as a direct drop-in replacement unless its complete pinout, supply range, differential input range, reference arrangement, I2C protocol, and conversion timing match the MCP3422A7-E/SN. No verified cross-brand, pin-compatible substitute is identified here. The documented alternatives are same-brand MCP3422 variants in the identical 8-pin SOIC footprint, with conversion-rate trade-offs that require engineering review.
Where to buy MCP3422A7-E/SN online?
Use the Request a Quote form on this page to request MCP3422A7-E/SN availability, order quantities, and current commercial terms. The part is an 8-pin SOIC member of Microchip Technology's MCP3422 precision ADC family. Confirm the exact suffix, reel or tube packaging, lead time, and shipment quantity when submitting the request so the manufacturer ordering code is not changed unintentionally.
What is the price of MCP3422A7-E/SN?
The current commercial price for MCP3422A7-E/SN is presented through the Request a Quote form on this page. Quote requests should specify the required quantity, package format, and target delivery schedule. The part's exact manufacturer ordering code is MCP3422A7-E/SN, and the -E/SN suffix identifies the specified temperature and package ordering configuration.
What is the lead time and stock status for MCP3422A7-E/SN?
Request the current stock position, lead time, and minimum order quantity through the Request a Quote form on this page. The MCP3422A7-E/SN is listed as an 8-pin SOIC precision ADC by its manufacturer and remains represented by current distributor catalog records. Because stock and manufacturing schedules can change by region and order quantity, engineers should use the quote form for allocation information before committing a production schedule.

Datos de referencia de ingeniería para MCP3422A7-E/SN — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the MCP3422A7-E/SN for precision, low-rate measurements that can be sampled at up to 4 samples/s and require two differential channels, an integrated 2.048 V reference, and an 8-pin SOIC footprint. It is particularly appropriate for temperature, pressure, load-cell, battery, and laboratory systems where changing signals are measured rather than captured as waveforms. Select MCP3422A0-E/SN, MCP3422A1-E/SN, or MCP3422A4-E/SN when a different family conversion rate better matches the required update interval; each retains the same package and core measurement architecture. MCP3422A5-E/SN and MCP3422A6-E/SN are additional same-family drop-in candidates, but their exact conversion and timing requirements should be confirmed before substitution. No cross-brand drop-in part is recommended because equivalent pinout, reference behavior, acquisition timing, and I2C behavior would all need independent verification.

Comparación con alternativas

Parámetro Este producto MCP3422A0-E/SN MCP3422A1-E/SN MCP3422A4-E/SN MCP3422A5-E/SN MCP3422A6-E/SN
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology

Diferenciadores clave

  • Selected 4 samples/s conversion-rate option (frente a MCP3422A0-E/SN)
  • Integrated precision reference (frente a MCP3422A4-E/SN)
  • Pin-compatible family integration (frente a MCP3422A1-E/SN)
  • Precision versus speed trade-off (frente a MCP3422A5-E/SN)

Notas de diseño

Route the two differential input channels as a compact, balanced pair and keep the analog inputs away from the I2C clock and switching-supply nodes. Place input filtering and protection close to the MCP3422A7-E/SN so that external traces add minimal noise and capacitance. The 18-bit resolution makes the analog layout important: small disturbances that are harmless for a 12-bit converter can affect the useful accuracy of this precision delta-sigma device.

Use the onboard 2.048 V reference consistently and observe the manufacturer's recommended reference bypass arrangement. If an external reference is permitted by the device configuration, its noise, drift, and startup behavior must be evaluated against the internal source. Do not treat the ±2.048 V differential range as a permission to place arbitrary signals on either input; common-mode voltage and individual pin limits must also remain within the electrical-characteristics table.

The MCP3422A7-E/SN converts at up to 4 samples/s, so application code and signal filtering must respect that rate. Polling faster than the acquisition process completes can return stale results or cause a missed conversion. Avoid using this converter for mains-frequency waveform reconstruction, audio, or fast transient capture, and allow sufficient settling time after changing the analog input or multiplexer configuration.

Provide a low-noise supply within the 2.7 V to 5.5 V operating range and place the supply bypass capacitor close to the device. If the analog supply and digital supply have separate pins, treat their filtering and grounding arrangement according to the manufacturer layout example. Poor supply regulation or shared return-current paths can introduce offset and noise that cannot be corrected by the converter's numeric resolution.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated in the manufacturer page excerpt and must be confirmed from the applicable Microchip Technology product documentation.

Datos verificados el: 2026-11-20 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MCP3422A7-E/SN datasheet MCP3422A7-E/SN pinout MCP3422A7-E/SN datasheet pdf MCP3422A7-E/SN equivalent MCP3422A7-E/SN replacement MCP3422A7-E/SN cross reference MCP3422A7-E/SN price MCP3422A7-E/SN stock Microchip MCP3422A7-E/SN MCP3422A7-E/SN 18-bit ADC MCP3422A7-E/SN vs MCP3422A1-E/SN MCP3422A7-E/SN application circuit MCP3422 2.048V reference ADC MCP3422 8-pin SOIC ADC

Componentes & términos relacionados

Microchip Technology MCP3422A7-E/SN MCP3422A0-E/SN MCP3422A1-E/SN MCP3422A4-E/SN MCP3422A5-E/SN MCP3422A6-E/SN MCP3422 ADC delta-sigma ADC analog-to-digital converter precision data converter semiconductor I2C differential input on-board voltage reference 2.048 V reference 18-bit resolution 4 samples/s 2.7 V to 5.5 V supply 8-pin SOIC SOIC family surface mount SMD industrial sensor measurement battery monitoring load-cell measurement
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ