MCP3422A7-E/SN - 18-Bit Dual-Channel ADC | Microchip
MPN: MCP3422A7-E/SN ✓ فعالMCP3422A7-E/SN جائزہ
A delta-sigma ADC is a voltage regulator–independent type of analog-to-digital converter that uses continuous-time delta-sigma modulation, digital filtering, and decimation to produce high-resolution results. The MCP3422 belongs to the ADC > delta-sigma ADC > analog-to-digital converter hierarchy and provides an I2C-compatible digital interface alongside its precision analog front end. Differential inputs help reject common-mode noise when the signal source and converter share a common reference point.
Key features include up to 18-bit resolution, two differential input channels, an integrated 2.048 V reference, and an input range of ±2.048 V. The device operates from 2.7 V to 5.5 V, supports a -40°C to 125°C temperature range, and is designed for low-noise measurement rather than high-speed waveform acquisition. Its 4 SPS rate suits temperature, pressure, load-cell, bridge-sensor, and slowly changing process measurements.
The internal conversion architecture emphasizes resolution and noise performance instead of sampling rate. The onboard reference establishes a stable full-scale differential measurement window, while the differential input arrangement supports common-mode rejection when paired with appropriate input conditioning. I2C communication reduces the number of data connections needed to retrieve conversion results from a host controller.
Typical applications include industrial pressure and temperature transmitters, strain-gauge and load-cell instrumentation, battery monitoring, laboratory measurement equipment, and precision analog sensor interfaces. Because the converter samples at up to 4 SPS, applications requiring waveform capture, audio bandwidth, or rapid transient analysis should select a faster ADC.
For PCB implementation, place the reference and input-conditioning components close to the converter, keep analog and digital return paths controlled, and use a clean low-noise supply. Differential input filtering must preserve the required source impedance and settling behavior. Use the manufacturer pin-description table when assigning PCB tracks and verify the SOIC-8 footprint against the selected assembly variant.
This product page combines manufacturer specifications, verified distributor availability, same-family drop-in candidates, comparison data, and practical PCB and signal-conditioning guidance to support faster component selection and design review.
کے لیے ڈراپ اِن متبادل MCP3422A7-E/SN — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MCP3422A7-E/SN (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Conversion Rate, Differential Input Range, Operating Temperature Range, Input Architecture, Resolution.
MCP3422A0-E/SN
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MCP3422A1-E/SN
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MCP3422A4-E/SN
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MCP3422A5-E/SN
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MCP3422A6-E/SN
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MCP3422A7-E/SN زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| ADC Type | 18-bit delta-sigma ADC |
| Input Channels | 2 channels |
| Input Architecture | Differential inputs |
| Maximum Resolution | 18 bits |
| Conversion Rate | 4 samples/s |
| On-Board Reference Voltage | 2.048 V |
| Differential Input Range | ±2.048 V differential |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Nominal Supply Voltage | 3.3 V or 5 V |
| آپریٹنگ درجہ حرارت رینج | -40°C to +125°C |
| Digital Interface | I2C |
| پیکیج | 8-pin SOIC |
| ماؤنٹنگ ٹائپ | Surface mount |
MCP3422A7-E/SN 8-pin soic پن کنفیگریشن گائیڈ
MCP3422A7-E/SN (8-pin soic پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MCP3422A7-E/SN.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
MCP3422A7-E/SN کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Pressure Transmitters, Temperature Sensing Systems, Load Cell and Strain Measurement, Battery Monitoring, Precision Laboratory Instruments, Process Control and Environmental Monitoring.
Industrial Pressure Transmitters
The MCP3422A7-E/SN fits industrial pressure transmitters that monitor slowly changing bridge or ratiometric sensor signals. Its differential inputs support a 2-channel measurement architecture, while up to 18-bit resolution preserves useful detail in the sensor output. The integrated 2.048 V reference provides a stable differential full-scale window of ±2.048 V, reducing the need for a separate reference in the signal chain. With a maximum conversion rate of 4 samples/s, the converter is appropriate for process pressure, hydraulic pressure, and slowly varying industrial measurements. Designers should use low-noise input amplifiers or passive networks with suitable common-mode range and source impedance, then filter the result before transmission through the I2C interface.
تجویز کردہ
Temperature Sensing Systems
The MCP3422A7-E/SN is appropriate for temperature monitoring systems whose sensor output changes more slowly than the converter's 4 samples/s limit. An 18-bit delta-sigma conversion can provide high numerical resolution for RTDs, thermistors, thermocouple conditioning outputs, and digital temperature sensors represented as analog voltages. The two differential channels allow related measurements to be acquired through the same converter, provided each signal remains within ±2.048 V differential and the common-mode voltage satisfies the device requirements. The onboard 2.048 V reference improves repeatability, while the I2C interface simplifies connection to a microcontroller. Engineers should distinguish numeric resolution from sensor accuracy and account for self-heating, excitation drift, and input-filter settling time in the final error budget.
تجویز کردہ
Load Cell and Strain Measurement
The MCP3422A7-E/SN is well matched to load-cell and strain-gauge systems because its differential inputs can receive a small bridge excitation centered around a common-mode voltage while rejecting shared noise. The integrated 2.048 V reference and up to 18-bit resolution support precise measurement of small changes in bridge output. Its two-channel arrangement can monitor a load cell and a reference or compensation channel when the analog front end is designed accordingly. The 4 samples/s maximum rate suits static loads, force testing, and quasi-static mechanics rather than impact waveforms. Practical implementation requires regulated bridge excitation, low-offset input components, matched routing, and an analog filter that does not introduce excessive settling delay between successive conversions.
تجویز کردہ
Battery Monitoring
The MCP3422A7-E/SN can support low-rate battery monitoring when the cell or stack voltage is conditioned below the ±2.048 V differential input range. Two differential channels are useful for measuring a battery rail and a scaled auxiliary signal, provided both remain within the converter's input and common-mode limits. The up-to-18-bit conversion provides fine code resolution, which is valuable when detecting gradual changes in terminal voltage. The 2.048 V onboard reference supports repeatable measurements, and I2C allows a battery-management controller to retrieve results efficiently. Because the converter's maximum rate is 4 samples/s, it is better suited to state-of-charge monitoring than to transient protection or rapid short-circuit detection. A dedicated analog front end must handle high cell voltages safely.
تجویز کردہ
Precision Laboratory Instruments
The MCP3422A7-E/SN is useful in laboratory and test equipment that records stable or slowly varying analog quantities with high numeric resolution. The 18-bit delta-sigma architecture, differential inputs, and 2.048 V internal reference are advantageous for programmable sources, resistance standards, and sensor reference measurements where low switching noise is more important than rapid acquisition. Two channels permit paired readings that can support ratiometric correction or simple differential diagnostics. The I2C interface reduces pin count in compact instrument architectures and can coexist with other addressable peripherals when the bus address plan is correct. Instrument designers should account for source settling, leakage, reference behavior, and the 4 samples/s limit when setting test times; these analog and timing considerations often determine final accuracy more than the nominal bit count.
تجویز کردہ
Process Control and Environmental Monitoring
The MCP3422A7-E/SN supports environmental and process-control nodes that periodically report temperature, humidity, pressure, gas concentration, or flow-derived analog voltages. Two differential channels let a compact sensor node handle a measurement and compensation or reference signal through the same converter. Its maximum 4 samples/s rate is appropriate for slow environmental dynamics, while the 18-bit resolution and integrated reference support stable digital results over long measurement intervals. I2C communication is well suited to distributed sensor modules connected to a microcontroller or edge controller. The circuit should include protection appropriate to the sensor environment, anti-alias filtering, and a clean supply arrangement. Firmware should also account for the converter's acquisition sequence and reject samples affected by startup or input-settling transients.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MCP3422A7-E/SN — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MCP3422A0-E/SN | MCP3422A1-E/SN | MCP3422A4-E/SN | MCP3422A5-E/SN | MCP3422A6-E/SN |
|---|---|---|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
اہم امتیازی خصوصیات
- Selected 4 samples/s conversion-rate option (بمقابلہMCP3422A0-E/SN)
- Integrated precision reference (بمقابلہMCP3422A4-E/SN)
- Pin-compatible family integration (بمقابلہMCP3422A1-E/SN)
- Precision versus speed trade-off (بمقابلہMCP3422A5-E/SN)
ڈیزائن نوٹس
Route the two differential input channels as a compact, balanced pair and keep the analog inputs away from the I2C clock and switching-supply nodes. Place input filtering and protection close to the MCP3422A7-E/SN so that external traces add minimal noise and capacitance. The 18-bit resolution makes the analog layout important: small disturbances that are harmless for a 12-bit converter can affect the useful accuracy of this precision delta-sigma device.
Use the onboard 2.048 V reference consistently and observe the manufacturer's recommended reference bypass arrangement. If an external reference is permitted by the device configuration, its noise, drift, and startup behavior must be evaluated against the internal source. Do not treat the ±2.048 V differential range as a permission to place arbitrary signals on either input; common-mode voltage and individual pin limits must also remain within the electrical-characteristics table.
The MCP3422A7-E/SN converts at up to 4 samples/s, so application code and signal filtering must respect that rate. Polling faster than the acquisition process completes can return stale results or cause a missed conversion. Avoid using this converter for mains-frequency waveform reconstruction, audio, or fast transient capture, and allow sufficient settling time after changing the analog input or multiplexer configuration.
Provide a low-noise supply within the 2.7 V to 5.5 V operating range and place the supply bypass capacitor close to the device. If the analog supply and digital supply have separate pins, treat their filtering and grounding arrangement according to the manufacturer layout example. Poor supply regulation or shared return-current paths can introduce offset and noise that cannot be corrected by the converter's numeric resolution.
تعمیل کی معلومات
The exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated in the manufacturer page excerpt and must be confirmed from the applicable Microchip Technology product documentation.