Microchip Technology

MCP3561T-E/NC - 24-Bit Dual-Input ADC | Microchip

N.º de pieza: MCP3561T-E/NC ✓ Activo
20-UQFN (3 mm x 3 mm) Package
MOQ: 1 |

MCP3561T-E/NC Descripción general

Microchip Technology MCP3561T-E/NC is a 24-bit low-noise delta-sigma analog-to-digital converter with two single-ended or one differential input channel, a maximum data rate of 153.6 ksps, and a 20-pin UQFN package measuring 3 mm by 3 mm. Its combination of programmable conversion speed, integrated oscillator, temperature sensor, and burnout detection supports compact, high-resolution measurement systems.

A delta-sigma ADC is a type of analog-to-digital converter that uses continuous-time integration and digital filtering to convert an analog input into a high-resolution digital code. It belongs to the broader data-converter IC category, where its strengths are excellent noise performance and high resolution. The MCP3561 family is designed for precision sensing rather than high-speed waveform capture, with the MCP3561 serving as the one-channel differential or dual-single-ended member of the MCP3561, MCP3562, and MCP3564 family.

Key characteristics include a 24-bit resolution, a programmable output data rate up to 153.6 ksps, and two single-ended or one differential input configuration. The converter also includes an internal oscillator, temperature sensor, and burnout detection. These functions can reduce the number of supporting components and simplify system-level calibration and fault monitoring.

The MCP3561 uses delta-sigma conversion to achieve high effective resolution while controlling noise over the selected digital filter bandwidth. Digital filtering removes out-of-band energy but introduces conversion latency, so the output data rate and filter configuration must be matched to the required response time. When an external precision reference is preferred, Microchip identifies the MCP3561R as the pin-compatible family option with an onboard voltage reference.

Typical uses include industrial process measurement, sensor-interface systems, portable instrumentation, pressure and temperature monitoring, and low-frequency precision acquisition. The low-noise architecture is especially useful when the measured signal is relatively slow but small relative to the full-scale input range. The compact UQFN package also supports space-constrained circuit boards requiring multiple analog channels.

Designers should verify differential input range, common-mode limits, output-data-rate-dependent noise, filter latency, reference requirements, and digital interface timing before finalizing the analog front end. Decoupling capacitors should be placed close to the supply and reference pins, and the PCB should provide a short, quiet return path from the analog input and reference circuitry to the device ground.

This page combines manufacturer specifications, application guidance, package information, and pin-compatible family alternatives to support component selection and PCB implementation. It also distinguishes the standard MCP3561 from the MCP3561R reference-equipped configuration so engineers can choose the appropriate member before schematic layout.

Alternativas directas para MCP3561T-E/NC — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MCP3561T-E/NC (mismo factor de forma y huella) — difiere en Package, RoHS Status, Input Configuration, Internal Oscillator, ADC Type.

Microchip Technology
Package: 20-pin TSSOP
RoHS Status: Compliant
Input Configuration: 2 single-ended or 1 differential input
Microchip Technology
Package: 20-pin UQFN, 3 mm x 3 mm
RoHS Status: RoHS compliant
Internal Oscillator: Yes, integrated in the MCP3561R family
Microchip Technology
Package: 20-pin TSSOP
RoHS Status: unknown
ADC Type: Delta-sigma ADC

MCP3561R-E/NC

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 20-UQFN (3 mm x 3 mm)
Adds 1 onboard voltage reference to the pin-compatible MCP3561 configuration; resolution and maximum data rate remain 24 bit and 153.6 ksps.

📋 Alternativa de referencia (no en el catálogo)

MCP3561R-E/ST

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Microchip Technology
📦 20-UQFN (3 mm x 3 mm)
24-bit Delta-Sigma ADC · 24 bit · 2 single-ended or 1 differential input · 153.6 kSPS · SPI · Integrated · Integrated · Integrated

Consulte el precio

Ver hoja de datos →

MCP3561T-E/ST

✅ Sustitución directa
Microchip Technology
📦 20-UQFN (3 mm x 3 mm)
Delta-sigma ADC · 24 bit · 153.6 kSPS · 2 single-ended inputs or 1 differential input · No · Up to 153.6 kSPS

Consulte el precio

Ver hoja de datos →

MCP3561RT-E/NC

✅ Sustitución directa
Microchip Technology
📦 20-UQFN (3 mm x 3 mm)
24 bit · 153.6 kSPS · 2 single-ended inputs or 1 differential input · Delta-sigma · 2 channels · 3.6 V · SPI · -40°C to +125°C

Consulte el precio

Ver hoja de datos →

MCP3561RRT-E/NC

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 20-UQFN (3 mm x 3 mm)
Adds 1 onboard voltage reference and uses the RT ordering suffix while retaining 24-bit resolution and a maximum data rate of 153.6 ksps.

📋 Alternativa de referencia (no en el catálogo)

MCP3561T-E/NC Valores máximos y características eléctricas

Converter Type Delta-sigma ADC
Resolución 24 bit
Number of Channels 1 converter channel
Input Configuration 2 single-ended inputs or 1 differential input
Maximum Output Data Rate 153.6 ksps
Programmable Data Rate Up to 153.6 ksps
Noise Class Low-noise
Internal Oscillator Integrated
Temperature Sensor Integrated
Burnout Detection Integrated
Encapsulado 20-UQFN (3 mm x 3 mm)
Tipo de montaje Surface mount

Guía de configuración de pines de MCP3561T-E/NC 20-uqfn (3 mm x 3 mm)

Configuración de pines para MCP3561T-E/NC (encapsulado 20-uqfn (3 mm x 3 mm)). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 20-uqfn (3 mm x 3 mm) para MCP3561T-E/NC

No hay datos detallados de patillaje disponibles para MCP3561T-E/NC.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MCP3561T-E/NC es adecuado para 6 aplicacións: Industrial Process Measurement, Temperature and Pressure Monitoring, Portable Instrumentation, Precision Data Acquisition, Battery-Powered Sensor Nodes, Load Cell and Bridge Sensing.

🏭

Industrial Process Measurement

The MCP3561T-E/NC fits slow industrial process signals that require high resolution but do not require waveform acquisition at the maximum conversion rate. Its 24-bit delta-sigma architecture operates at programmable rates up to 153.6 ksps, while the internal oscillator, temperature sensor, and burnout detection can support self-contained measurement channels. Configure two single-ended inputs for pressure and temperature sensors, or use one differential input for a bridge transducer. The principal design trade-off is digital-filter latency: a lower output data rate can improve rejection of noise but delays new results. Analog excitation, common-mode range, grounding, and sensor-specific protection must be checked independently of converter resolution.

🌡️

Temperature and Pressure Monitoring

The MCP3561T-E/NC can acquire low-level signals from resistive temperature and pressure sensors when the application prioritizes resolution, compactness, and integrated diagnostics. The 24-bit conversion resolution preserves detail in sensor outputs, and the programmable data rate up to 153.6 ksps permits the designer to trade throughput for digital-filter noise performance. Its integrated temperature sensor and burnout detection provide useful health-monitoring functions in multi-sensor equipment. Two single-ended inputs allow the converter to monitor related channels sequentially, although the 1-channel architecture does not perform simultaneous sampling. Select input protection and conditioning for the sensor bridge, and confirm the common-mode range before applying it directly to a high-supply excitation.

📱

Portable Instrumentation

The MCP3561T-E/NC suits portable measurement instruments where a 3 mm by 3 mm, 20-UQFN package helps reduce board area while retaining 24-bit converter resolution. A programmed data rate can be selected to match the instrument's response requirements, with the maximum supported rate of 153.6 ksps. The integrated oscillator removes one external timing dependency, while the temperature sensor and burnout detection can assist instrument diagnostics. Engineers should compare filter settling time against the instrument's measurement cadence and verify power-consumption requirements at the selected rate. A compact implementation also requires careful placement of input, reference, and decoupling networks so that switching activity and return-current paths do not degrade converter performance.

🖥️

Precision Data Acquisition

The MCP3561T-E/NC is appropriate for precision acquisition channels that measure slowly changing analog quantities with high resolution and limited channel count. Its 24-bit delta-sigma conversion and programmable data rate up to 153.6 ksps provide flexibility for balancing conversion time against filtered noise. One differential input supports active bridges and ratiometric sensors, while two single-ended inputs support simpler unipolar arrangements. The integrated temperature sensor is useful for compensation or system monitoring, and burnout detection can identify failed sensor loops. For laboratory equipment, preserve a quiet analog ground region, use short input traces, and confirm that the selected digital filter satisfies both settling-time and bandwidth requirements before treating the nominal resolution as usable accuracy.

🔋

Battery-Powered Sensor Nodes

The MCP3561T-E/NC can serve as the measurement section of a compact battery-powered sensor node when the sampled signal changes slowly and the converter can operate at a programmed rate below its 153.6 ksps maximum. The internal oscillator, temperature sensor, and burnout detection reduce external support requirements, while the small 20-UQFN footprint leaves board area for sensing, isolation, and communications. The conversion system must be evaluated at the actual output data rate because digital filtering affects noise, settling time, and energy per conversion. Select the data rate and analog input arrangement to meet the application's duty cycle, and verify supply voltage and reference behavior against the energy budget and sensor excitation scheme.

⚖️

Load Cell and Bridge Sensing

The MCP3561T-E/NC is well matched to low-level bridge sensors that benefit from a single differential analog channel and high converter resolution. Its 24-bit delta-sigma architecture can support 24-bit code width at a programmable data rate up to 153.6 ksps, while two single-ended or one differential configuration allows reuse of the same converter family for different sensor types. The internal temperature sensor can assist with thermal monitoring, and burnout detection can expose certain open- or short-circuit conditions in the sensor path. A practical bridge front end still needs excitation, input filtering, and common-mode analysis; the converter's common-mode range and differential input span must match the bridge output at full scale.

Resumen de productos recomendados

MCP3561R-E/NC Pin-compatible family option with onboard voltage reference Se usa en: Industrial Process Measurement, Temperature and Pressure Monitoring, Portable Instrumentation, Precision Data Acquisition, Battery-Powered Sensor Nodes, Load Cell and Bridge Sensing MCP3562T-E/NC Microchip Technology Se usa en: Industrial Process Measurement, Precision Data Acquisition MCP3564T-E/NC Microchip Technology Se usa en: Temperature and Pressure Monitoring, Load Cell and Bridge Sensing MCP3561T-E/ST Microchip Technology Se usa en: Portable Instrumentation, Battery-Powered Sensor Nodes
What is the MCP3561T-E/NC?
The MCP3561T-E/NC is a Microchip Technology 24-bit delta-sigma analog-to-digital converter with a maximum output data rate of 153.6 ksps. It supports two single-ended or one differential input configuration and is housed in a 20-UQFN package measuring 3 mm by 3 mm. According to the Microchip manufacturer datasheet DS20006181B, the MCP3561 family also includes an internal oscillator, temperature sensor, and burnout detection for precision measurement and monitoring applications.
What are the key specifications of MCP3561T-E/NC that engineers should know?
The MCP3561T-E/NC combines 24-bit resolution, a programmable output data rate up to 153.6 ksps, and two single-ended or one differential input configuration. According to the Microchip manufacturer datasheet DS20006181B, it also integrates an internal oscillator, temperature sensor, and burnout detection. The device uses a delta-sigma conversion architecture and is packaged in a compact 20-UQFN measuring 3 mm by 3 mm, making it appropriate for high-resolution industrial and instrumentation acquisition.
Where can I download the MCP3561T-E/NC datasheet PDF?
The official MCP3561 family datasheet is available from Microchip Technology as PDF document DS20006181B. It covers the MCP3561, MCP3562, and MCP3564 low-noise 24-bit delta-sigma ADCs, including their common electrical characteristics, digital filtering behavior, configuration options, and application information. Use the manufacturer document for final pin assignments, timing, absolute maximum ratings, and detailed characteristic curves before completing a production schematic.
Where can I find the MCP3561T-E/NC pinout?
The MCP3561T-E/NC pinout is documented in the pin-description and package diagrams within the Microchip manufacturer datasheet DS20006181B. The device uses a 20-UQFN package, so its 20 terminals must be assigned using the numbering printed on that package diagram. The pin-description table should be used directly when assigning analog inputs, supplies, digital interface signals, reference connections, and exposed-pad grounding.
How many inputs and channels does MCP3561T-E/NC have?
The MCP3561T-E/NC provides one converter channel that can be configured as two single-ended inputs or one differential input. According to the Microchip manufacturer datasheet DS20006181B, the MCP3561 is the one-channel member of a broader family that also includes two-channel and four-channel devices. This configuration allows one differential transducer or two related single-ended sensors to share the same high-resolution delta-sigma conversion engine.
What is the maximum sampling rate of MCP3561T-E/NC?
The maximum output data rate of the MCP3561T-E/NC is 153.6 ksps. The conversion rate is programmable, allowing the application to balance throughput against the noise and latency associated with the selected digital-filter configuration. According to the Microchip manufacturer datasheet DS20006181B, the low-noise 24-bit architecture makes the device well suited to precision acquisition when the source signal changes more slowly than the maximum conversion rate.
What is the difference between MCP3561T-E/NC and MCP3561R-E/NC?
The principal difference is the voltage-reference configuration: the MCP3561R includes an onboard voltage reference, while the standard MCP3561 does not. Microchip states that the MCP3561R is a preferred, pin-compatible option for new designs that use the onboard reference. Both configurations retain the 24-bit delta-sigma conversion architecture and up to 153.6 ksps data rate, but the reference-equipped version can reduce external reference circuitry.
MCP3561T-E/NC vs MCP3561T-E/ST - which is better for industrial use?
The MCP3561T-E/NC and MCP3561T-E/ST are pin-compatible members of the same 20-UQFN ADC family, but their temperature-grade suffixes must be checked against the enclosure temperature and qualification requirements of the finished product. The MCP3561T-E/NC carries the extended-grade designation, while MCP3561T-E/ST uses the standard-temperature designation. According to Microchip ordering information, choose the suffix only after confirming the required environmental range.
When should I choose MCP3561T-E/NC over another MCP3561 family member?
Choose the MCP3561T-E/NC when the design needs one high-resolution converter channel, either two single-ended inputs or one differential input, and can use an external voltage reference or another suitable reference arrangement. The device provides 24-bit resolution and data rates up to 153.6 ksps. Choose an MCP3561R option when an integrated reference is required, or select the multi-channel MCP3562 and MCP3564 members when simultaneous channel count is more important than converter density.
Is MCP3561T-E/NC suitable for precision sensor measurement?
The MCP3561T-E/NC is suitable for precision sensor measurement when the sensed signal is compatible with its delta-sigma conversion bandwidth and input limits. Its 24-bit resolution, programmable data rate up to 153.6 ksps, integrated oscillator, temperature sensor, and burnout detection support high-resolution acquisition and system monitoring. The analog front end must still provide suitable excitation, common-mode headroom, low-noise grounding, and protection for the specific sensor.
What is the best drop-in replacement for MCP3561T-E/NC?
The MCP3561R-E/NC is the closest documented pin-compatible family alternative because it retains the 20-UQFN footprint while adding an onboard voltage reference. Microchip explicitly identifies the MCP3561R as the preferred pin-compatible option for new designs. It is suitable when an integrated reference is acceptable, although its reference and bias behavior must be reviewed against the original schematic rather than treating the added feature as automatically interchangeable in every design.
What can replace MCP3561T-E/NC?
A drop-in replacement must use the same 20-UQFN footprint and preserve the converter's essential electrical and digital interface functions. Documented family options include MCP3561R-E/NC with an onboard voltage reference and MCP3561T-E/ST with a different temperature-grade suffix. No verified cross-brand equivalent was identified. Before replacing the device, verify input range, reference voltage, supply voltage, interface timing, output data rate, package dimensions, and exposed-pad requirements.
Where can I buy MCP3561T-E/NC online?
Use the Request a Quote form on this XAIPART product page to request availability, current commercial terms, and an order quotation for MCP3561T-E/NC. The form provides a direct channel for the exact manufacturer part number and its 20-UQFN package configuration. Request the required quantity, date code, packaging preference, shipment destination, and any traceability documentation needed for the production build.
What is the price of MCP3561T-E/NC?
The current commercial quotation for MCP3561T-E/NC should be requested through the Request a Quote form on this XAIPART page. Quotation requests should identify the exact MCP3561T-E/NC suffix, required quantity, packaging preference, and delivery location so that supply and commercial terms can be confirmed for the correct 20-UQFN device. This approach also accommodates project-specific purchasing volume and production schedules.
What is the lead time and stock status of MCP3561T-E/NC?
Microchip Direct lists MCP3561T-E/NC as available to order with an estimated shipment date of 16-Dec-2026 and an estimated nine-week lead time. Because schedules can change, use the Request a Quote form on this page to confirm current stock, allocation, and lead time for the required quantity. Include the intended build dates and packaging requirements when requesting the quotation.

Datos de referencia de ingeniería para MCP3561T-E/NC — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MCP3561T-E/NC for high-resolution measurement when one converter channel is enough, the board area is constrained, and you need either two single-ended inputs or one differential input. Its 24-bit delta-sigma architecture, programmable rate up to 153.6 ksps, internal oscillator, temperature sensor, and burnout detection suit precision industrial, instrumentation, and sensor-node designs. Select MCP3561R-E/NC when an onboard voltage reference is preferred and its electrical behavior fits the analog chain; Microchip identifies the R version as the preferred pin-compatible option for new designs using that reference. Choose a temperature-grade suffix only after checking the required enclosure range and qualification criteria. Use MCP3562 or MCP3564 family devices when more converter channels are required. No verified cross-brand drop-in equivalent was identified, so an alternative manufacturer would require a new footprint, interface review, and recalculation of the analog and digital design.

Comparación con alternativas

Parámetro Este producto MCP3561R-E/NC MCP3561R-E/ST MCP3561T-E/ST MCP3561RT-E/NC MCP3561RRT-E/NC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 20-UQFN (3 mm x 3 mm) 20-UQFN (3 mm x 3 mm) 20-UQFN (3 mm x 3 mm) 20-UQFN (3 mm x 3 mm) 20-UQFN (3 mm x 3 mm) 20-UQFN (3 mm x 3 mm)
Resolution 24 bit 24 bit 24 bit 24 bit 24 bit 24 bit
Maximum Output Data Rate 153.6 ksps 153.6 ksps 153.6 ksps 153.6 ksps 153.6 ksps 153.6 ksps
Converter Channels 1 channel; 2 single-ended or 1 differential input 1 channel; 2 single-ended or 1 differential input 1 channel; 2 single-ended or 1 differential input 1 channel; 2 single-ended or 1 differential input 1 channel; 2 single-ended or 1 differential input 1 channel; 2 single-ended or 1 differential input
Onboard Voltage Reference No Yes Yes No No Yes
Internal Oscillator Integrated Integrated Integrated Integrated Integrated Integrated
Temperature Sensor Integrated Integrated Integrated Integrated Integrated Integrated
Burnout Detection Integrated Integrated Integrated Integrated Integrated Integrated

Diferenciadores clave

  • One-channel density with dual single-ended or differential input (frente a MCP3564T-E/NC)
  • Programmable throughput up to 153.6 ksps (frente a MCP3562T-E/NC)
  • External-reference configuration provides design flexibility (frente a MCP3561R-E/NC)

Notas de diseño

Route the two analog inputs and any external reference directly to the MCP3561T-E/NC with short, symmetric traces. Place the specified input and bypass capacitors close to their associated pins, and connect the exposed pad using the manufacturer's land pattern and thermal guidance. Keep switching-regulator traces, digital clock lines, and high-current return paths away from the analog input area. A continuous ground reference beneath the analog section generally produces more repeatable conversion results than a split or fragmented ground arrangement.

Select the digital-filter and output-data-rate configuration together. The MCP3561T-E/NC supports rates up to 153.6 ksps, but faster operation can change noise, settling time, and conversion latency. Validate the filter response against the sensor bandwidth and required acquisition time rather than treating the 24-bit code width as instantaneous accuracy. Differential input routing should also maintain matched geometry where practical, and unused input channels should be connected according to the manufacturer pin table rather than left floating.

Do not treat the MCP3561R onboard-reference option as automatically interchangeable with the standard MCP3561 without reviewing the reference voltage, reference current, startup behavior, and decoupling requirements. The manufacturer identifies MCP3561R as pin-compatible and preferred for new designs when the onboard reference is used, but external-reference accuracy and analog calibration can differ between the two configurations. Also confirm the temperature-grade suffix against the enclosure environment before releasing the PCB.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Compliance attributes were not identified in the manufacturer product-page excerpt or the family datasheet excerpt and require confirmation from Microchip's current product documentation before qualification.

Datos verificados el: 2026-11-10 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MCP3561T-E/NC datasheet MCP3561T-E/NC pinout MCP3561T-E/NC datasheet pdf MCP3561T-E/NC equivalent MCP3561T-E/NC replacement MCP3561T-E/NC cross reference MCP3561T-E/NC price MCP3561T-E/NC stock Microchip MCP3561T-E/NC MCP3561 24-bit ADC MCP3561 153.6 ksps ADC MCP3561 20-UQFN pinout MCP3561 industrial sensor acquisition MCP3561T-E/NC vs MCP3561R-E/NC MCP3561T-E/NC application circuit

Componentes & términos relacionados

Microchip Technology MCP3561T-E/NC MCP3561R-E/NC MCP3561R-E/ST MCP3561T-E/ST MCP3561RT-E/NC MCP3561RRT-E/NC MCP3562T-E/NC MCP3564T-E/NC delta-sigma ADC analog-to-digital converter data converter IC 24-bit resolution 153.6 ksps differential input single-ended input internal oscillator temperature sensor burnout detection onboard voltage reference digital filter 20-UQFN UQFN package surface-mount package industrial process measurement
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ