MCP3561T-E/NC - 24-Bit Dual-Input ADC | Microchip
MPN: MCP3561T-E/NC ✓ सक्रियMCP3561T-E/NC अवलोकन
A delta-sigma ADC is a type of analog-to-digital converter that uses continuous-time integration and digital filtering to convert an analog input into a high-resolution digital code. It belongs to the broader data-converter IC category, where its strengths are excellent noise performance and high resolution. The MCP3561 family is designed for precision sensing rather than high-speed waveform capture, with the MCP3561 serving as the one-channel differential or dual-single-ended member of the MCP3561, MCP3562, and MCP3564 family.
Key characteristics include a 24-bit resolution, a programmable output data rate up to 153.6 ksps, and two single-ended or one differential input configuration. The converter also includes an internal oscillator, temperature sensor, and burnout detection. These functions can reduce the number of supporting components and simplify system-level calibration and fault monitoring.
The MCP3561 uses delta-sigma conversion to achieve high effective resolution while controlling noise over the selected digital filter bandwidth. Digital filtering removes out-of-band energy but introduces conversion latency, so the output data rate and filter configuration must be matched to the required response time. When an external precision reference is preferred, Microchip identifies the MCP3561R as the pin-compatible family option with an onboard voltage reference.
Typical uses include industrial process measurement, sensor-interface systems, portable instrumentation, pressure and temperature monitoring, and low-frequency precision acquisition. The low-noise architecture is especially useful when the measured signal is relatively slow but small relative to the full-scale input range. The compact UQFN package also supports space-constrained circuit boards requiring multiple analog channels.
Designers should verify differential input range, common-mode limits, output-data-rate-dependent noise, filter latency, reference requirements, and digital interface timing before finalizing the analog front end. Decoupling capacitors should be placed close to the supply and reference pins, and the PCB should provide a short, quiet return path from the analog input and reference circuitry to the device ground.
This page combines manufacturer specifications, application guidance, package information, and pin-compatible family alternatives to support component selection and PCB implementation. It also distinguishes the standard MCP3561 from the MCP3561R reference-equipped configuration so engineers can choose the appropriate member before schematic layout.
के लिए ड्रॉप-इन विकल्प MCP3561T-E/NC — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MCP3561T-E/NC (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, RoHS Status, Input Configuration, Internal Oscillator, ADC Type.
MCP3561R-E/NC
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MCP3561R-E/ST
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →MCP3561T-E/ST
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →MCP3561RT-E/NC
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →MCP3561RRT-E/NC
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MCP3561T-E/NC Maximum Ratings और Electrical Characteristics
| Converter Type | Delta-sigma ADC |
| रेज़ोल्यूशन | 24 bit |
| Number of Channels | 1 converter channel |
| Input Configuration | 2 single-ended inputs or 1 differential input |
| Maximum Output Data Rate | 153.6 ksps |
| Programmable Data Rate | Up to 153.6 ksps |
| Noise Class | Low-noise |
| Internal Oscillator | Integrated |
| Temperature Sensor | Integrated |
| Burnout Detection | Integrated |
| पैकेज | 20-UQFN (3 mm x 3 mm) |
| माउंटिंग प्रकार | Surface mount |
MCP3561T-E/NC 20-uqfn (3 mm x 3 mm) पिन कॉन्फ़िगरेशन गाइड
MCP3561T-E/NC (20-uqfn (3 mm x 3 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MCP3561T-E/NC.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
MCP3561T-E/NC के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Process Measurement, Temperature and Pressure Monitoring, Portable Instrumentation, Precision Data Acquisition, Battery-Powered Sensor Nodes, Load Cell and Bridge Sensing.
Industrial Process Measurement
The MCP3561T-E/NC fits slow industrial process signals that require high resolution but do not require waveform acquisition at the maximum conversion rate. Its 24-bit delta-sigma architecture operates at programmable rates up to 153.6 ksps, while the internal oscillator, temperature sensor, and burnout detection can support self-contained measurement channels. Configure two single-ended inputs for pressure and temperature sensors, or use one differential input for a bridge transducer. The principal design trade-off is digital-filter latency: a lower output data rate can improve rejection of noise but delays new results. Analog excitation, common-mode range, grounding, and sensor-specific protection must be checked independently of converter resolution.
अनुशंसित
Temperature and Pressure Monitoring
The MCP3561T-E/NC can acquire low-level signals from resistive temperature and pressure sensors when the application prioritizes resolution, compactness, and integrated diagnostics. The 24-bit conversion resolution preserves detail in sensor outputs, and the programmable data rate up to 153.6 ksps permits the designer to trade throughput for digital-filter noise performance. Its integrated temperature sensor and burnout detection provide useful health-monitoring functions in multi-sensor equipment. Two single-ended inputs allow the converter to monitor related channels sequentially, although the 1-channel architecture does not perform simultaneous sampling. Select input protection and conditioning for the sensor bridge, and confirm the common-mode range before applying it directly to a high-supply excitation.
अनुशंसित
Portable Instrumentation
The MCP3561T-E/NC suits portable measurement instruments where a 3 mm by 3 mm, 20-UQFN package helps reduce board area while retaining 24-bit converter resolution. A programmed data rate can be selected to match the instrument's response requirements, with the maximum supported rate of 153.6 ksps. The integrated oscillator removes one external timing dependency, while the temperature sensor and burnout detection can assist instrument diagnostics. Engineers should compare filter settling time against the instrument's measurement cadence and verify power-consumption requirements at the selected rate. A compact implementation also requires careful placement of input, reference, and decoupling networks so that switching activity and return-current paths do not degrade converter performance.
अनुशंसित
Precision Data Acquisition
The MCP3561T-E/NC is appropriate for precision acquisition channels that measure slowly changing analog quantities with high resolution and limited channel count. Its 24-bit delta-sigma conversion and programmable data rate up to 153.6 ksps provide flexibility for balancing conversion time against filtered noise. One differential input supports active bridges and ratiometric sensors, while two single-ended inputs support simpler unipolar arrangements. The integrated temperature sensor is useful for compensation or system monitoring, and burnout detection can identify failed sensor loops. For laboratory equipment, preserve a quiet analog ground region, use short input traces, and confirm that the selected digital filter satisfies both settling-time and bandwidth requirements before treating the nominal resolution as usable accuracy.
अनुशंसित
Battery-Powered Sensor Nodes
The MCP3561T-E/NC can serve as the measurement section of a compact battery-powered sensor node when the sampled signal changes slowly and the converter can operate at a programmed rate below its 153.6 ksps maximum. The internal oscillator, temperature sensor, and burnout detection reduce external support requirements, while the small 20-UQFN footprint leaves board area for sensing, isolation, and communications. The conversion system must be evaluated at the actual output data rate because digital filtering affects noise, settling time, and energy per conversion. Select the data rate and analog input arrangement to meet the application's duty cycle, and verify supply voltage and reference behavior against the energy budget and sensor excitation scheme.
अनुशंसित
Load Cell and Bridge Sensing
The MCP3561T-E/NC is well matched to low-level bridge sensors that benefit from a single differential analog channel and high converter resolution. Its 24-bit delta-sigma architecture can support 24-bit code width at a programmable data rate up to 153.6 ksps, while two single-ended or one differential configuration allows reuse of the same converter family for different sensor types. The internal temperature sensor can assist with thermal monitoring, and burnout detection can expose certain open- or short-circuit conditions in the sensor path. A practical bridge front end still needs excitation, input filtering, and common-mode analysis; the converter's common-mode range and differential input span must match the bridge output at full scale.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा MCP3561T-E/NC — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | MCP3561R-E/NC | MCP3561R-E/ST | MCP3561T-E/ST | MCP3561RT-E/NC | MCP3561RRT-E/NC |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-UQFN (3 mm x 3 mm) | 20-UQFN (3 mm x 3 mm) | 20-UQFN (3 mm x 3 mm) | 20-UQFN (3 mm x 3 mm) | 20-UQFN (3 mm x 3 mm) | 20-UQFN (3 mm x 3 mm) |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit |
| Maximum Output Data Rate | 153.6 ksps | 153.6 ksps | 153.6 ksps | 153.6 ksps | 153.6 ksps | 153.6 ksps |
| Converter Channels | 1 channel; 2 single-ended or 1 differential input | 1 channel; 2 single-ended or 1 differential input | 1 channel; 2 single-ended or 1 differential input | 1 channel; 2 single-ended or 1 differential input | 1 channel; 2 single-ended or 1 differential input | 1 channel; 2 single-ended or 1 differential input |
| Onboard Voltage Reference | No | Yes | Yes | No | No | Yes |
| Internal Oscillator | Integrated | Integrated | Integrated | Integrated | Integrated | Integrated |
| Temperature Sensor | Integrated | Integrated | Integrated | Integrated | Integrated | Integrated |
| Burnout Detection | Integrated | Integrated | Integrated | Integrated | Integrated | Integrated |
मुख्य विशेषताएँ
- One-channel density with dual single-ended or differential input (बनामMCP3564T-E/NC)
- Programmable throughput up to 153.6 ksps (बनामMCP3562T-E/NC)
- External-reference configuration provides design flexibility (बनामMCP3561R-E/NC)
डिज़ाइन नोट्स
Route the two analog inputs and any external reference directly to the MCP3561T-E/NC with short, symmetric traces. Place the specified input and bypass capacitors close to their associated pins, and connect the exposed pad using the manufacturer's land pattern and thermal guidance. Keep switching-regulator traces, digital clock lines, and high-current return paths away from the analog input area. A continuous ground reference beneath the analog section generally produces more repeatable conversion results than a split or fragmented ground arrangement.
Select the digital-filter and output-data-rate configuration together. The MCP3561T-E/NC supports rates up to 153.6 ksps, but faster operation can change noise, settling time, and conversion latency. Validate the filter response against the sensor bandwidth and required acquisition time rather than treating the 24-bit code width as instantaneous accuracy. Differential input routing should also maintain matched geometry where practical, and unused input channels should be connected according to the manufacturer pin table rather than left floating.
Do not treat the MCP3561R onboard-reference option as automatically interchangeable with the standard MCP3561 without reviewing the reference voltage, reference current, startup behavior, and decoupling requirements. The manufacturer identifies MCP3561R as pin-compatible and preferred for new designs when the onboard reference is used, but external-reference accuracy and analog calibration can differ between the two configurations. Also confirm the temperature-grade suffix against the enclosure environment before releasing the PCB.
अनुपालन जानकारी
Compliance attributes were not identified in the manufacturer product-page excerpt or the family datasheet excerpt and require confirmation from Microchip's current product documentation before qualification.