NXP Semiconductors

MK20DX64VLH7 - 72MHz Cortex-M4 64KB Flash MCU | NXP

N.º de pieza: MK20DX64VLH7 ✓ Activo
1.71 V to 3.6 V Vdss 64-LQFP, 10 x 10 mm Package 72 MHz Speed 64 KB Memory
MOQ: 1 |

MK20DX64VLH7 Descripción general

The NXP Semiconductors MK20DX64VLH7 is a 32-bit ARM Cortex-M4 Kinetis K20 microcontroller operating at 72 MHz, with 64 KB of flash memory and 16 KB of SRAM, in a 64-LQFP 10 x 10 mm package. It supports a 1.71 V to 3.6 V operating range and combines deterministic control performance with analog and communication peripherals for embedded systems.

A microcontroller is a programmable system-on-chip that integrates a processor core, memory, timers, analog converters, communication interfaces, and control peripherals on one device. The Kinetis K20 family occupies the middle of NXP's Kinetis portfolio, bridging simple entry-level control and higher-performance Cortex-M4 applications. Its ARM Cortex-M4 architecture supports efficient event-driven control, while the integrated analog resources reduce the need for external components.

The MK20DX64VLH7 combines a 72 MHz Cortex-M4 core with 64 KB of program flash and 16 KB of SRAM. Verified product information identifies high-precision analog integration, flexible low-power operation, and a suite of communication, timing, and control peripherals. Its operating voltage extends from 1.71 V to 3.6 V, allowing deployment in low-voltage industrial equipment while retaining the processing margin needed for mixed signal control loops.

The 64-LQFP package exposes a conventional leaded footprint that supports assembly and inspection processes requiring through-hole component handling. Its 64-pin count provides access to the K20 family's GPIO, communication, timer, analog, debug, and power functions. Exact peripheral multiplexing and alternate-function assignments must be assigned from the NXP pin-muxing documentation for the selected board configuration.

Typical applications include industrial controllers, connected metering equipment, motor-control and automation systems, sensor nodes, and compact embedded instruments. The 72 MHz processing rate is suitable for responsive supervisory loops, while the integrated analog peripherals support measurements and control functions close to the processor. The 16 KB SRAM helps accommodate working state, communication buffers, and time-critical data without requiring an external memory device in many designs.

Design the supply rails to remain within the 1.71 V to 3.6 V operating range, including transient conditions at the pins. Provide the required decoupling close to the power terminals, use a supported NXP programming and debug interface, and verify every peripheral pin assignment against the manufacturer datasheet and pin-muxing table before PCB release.

This page combines procurement-oriented component data, compatible family alternatives, application guidance, comparison parameters, and practical design notes to support faster engineering evaluation of the MK20DX64VLH7.

Alternativas directas para MK20DX64VLH7 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MK20DX64VLH7 (mismo factor de forma y huella) — difiere en Package, ADC Resolution, Flash Memory, SRAM, Temperature Grade.

NXP Semiconductors
Package: 64-pin LQFP (10x10 mm)
SRAM: 64 KB
Comparar con MK20DX64VLH7 →
NXP Semiconductors
Package: 64-LQFP (10x10 mm), FQFP square, gull-wing
ADC Resolution: 12-bit and 16-bit channels
Flash Memory: 64 KB (64K x 8)
Comparar con MK20DX64VLH7 →

MK20DX128VLH7

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 64-LQFP (10x10 mm)
Flash increases from 64 KB to 128 KB, a 100% increase, while retaining the K20 Cortex-M4 platform and 64-LQFP footprint

📋 Alternativa de referencia (no en el catálogo)

MK20DX256VLH7

✅ Sustitución directa ⚠️ Especificaciones sin verificar
NXP Semiconductors
📦 64-LQFP (10x10 mm)
ARM Cortex-M4 with FPU and DSP · 72 MHz · 256 KB (256K x 8) · 64 KB · 1.71 V to 3.6 V · Full-Speed USB Device with on-chip transceiver · 12-bit · 12-bit

Consulte el precio

Ver hoja de datos →

MK20DX32VLH7

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 64-LQFP (10x10 mm)
Flash decreases from 64 KB to 32 KB, a 50% reduction, making this a constrained-memory replacement rather than an upgrade

📋 Alternativa de referencia (no en el catálogo)

MK21DX128VLH7

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 64-LQFP (10x10 mm)
Flash increases from 64 KB to 128 KB, a 100% increase, and the K21 family may add or alter peripheral functions relative to K20

📋 Alternativa de referencia (no en el catálogo)

MK21DX256VLH7

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 64-LQFP (10x10 mm)
Flash increases from 64 KB to 256 KB, a 300% increase, while K21-family peripheral and low-power differences require design review

📋 Alternativa de referencia (no en el catálogo)

MK20DX64VLH7 Valores máximos y características eléctricas

Product Type 32-bit ARM Cortex-M4 microcontroller
Product Family Kinetis K20
Maximum CPU Frequency 72 MHz
Flash Memory 64 KB
Flash Organization 64K x 8 bits
SRAM 16 KB
Operating Voltage Range 1.71 V to 3.6 V
Architecture ARM 32-bit RISC
Core ARM Cortex-M4
Encapsulado 64-LQFP, 10 x 10 mm
Terminal Count 64 pins
Tipo de montaje Surface mount
Terminal Form Gull wing
Package Shape Square
Temperature Grade Industrial grade
ADC Resolution 12-bit and 16-bit
Estado del ciclo de vida Active

Guía de configuración de pines de MK20DX64VLH7 square

Configuración de pines para MK20DX64VLH7 (encapsulado square). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado square para MK20DX64VLH7

No hay datos detallados de patillaje disponibles para MK20DX64VLH7.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MK20DX64VLH7 es adecuado para 6 aplicacións: Industrial Control and Automation, Smart Metering and Data Acquisition, Motor Control and Actuator Interface, Communication Gateway and Sensor Node, Battery-Powered Embedded Instrument, Robotics and Condition Monitoring.

🏭

Industrial Control and Automation

The MK20DX64VLH7 fits supervisory control, sequencing, and machine-interface boards because its 72 MHz Cortex-M4 core provides useful processing headroom while 64 KB of flash and 16 KB of SRAM support embedded control firmware. The 1.71 V to 3.6 V range supports low-voltage industrial rails, and the integrated analog, timer, and communication resources reduce external component count. Use the MCU beside optically isolated interfaces, status indicators, and sensor conditioning. Before layout release, confirm every alternate-function assignment, oscillator requirement, and power terminal connection against the NXP pin-muxing documentation.

📡

Smart Metering and Data Acquisition

MK20DX64VLH7 is appropriate for compact metering equipment that combines signal measurement, local display control, and communications. Its 12-bit and 16-bit ADC resources support acquisition tasks, while the 72 MHz Cortex-M4 core can manage filtering, calibration, data packing, and communication protocols. The 16 KB SRAM provides useful working space for buffers and state handling. Use the device with a precision current or voltage front end, and verify analog accuracy, reference requirements, and acquisition timing in the manufacturer electrical characteristics. Firmware should also include calibration, overflow handling, and sensor diagnostics.

⚡

Motor Control and Actuator Interface

The MK20DX64VLH7 can coordinate motor-control supervisory functions, position or event counting, fault handling, and communication with a dedicated power stage. Its 72 MHz processor supports responsive control tasks, while integrated timers and analog resources help synchronize command sequencing with measured conditions. The 64-LQFP package provides access to a broad pin set for encoder, control, and status signals. Keep high-current switching paths separate from sensitive analog routing, validate timer pin multiplexing, and include hardware shutdown paths so a firmware fault cannot leave an actuator energized.

🌐

Communication Gateway and Sensor Node

MK20DX64VLH7 supports an embedded gateway or sensor node that must acquire local inputs, run control logic, and communicate with a higher-level system. Its Cortex-M4 core handles protocol state machines and timing, while the family’s communication and low-power peripherals support responsive operation between external events. The 64 KB flash footprint is suitable for moderate protocol stacks and application firmware. Select the operating clock and sleep mode explicitly, provide clean local decoupling, and reserve programming access for production configuration. If the protocol stack exceeds available memory, move to the 128 KB or 256 KB family variant.

🔋

Battery-Powered Embedded Instrument

MK20DX64VLH7 is suitable for compact, battery-powered instruments where a 72 MHz control processor and integrated analog resources must coexist with low-power operation. Its 1.71 V minimum operating voltage permits operation from appropriately regulated low-voltage rails, while low-power modes can reduce consumption during measurement intervals. The 16 KB SRAM helps avoid continuous external-memory access. Choose capacitors and regulators for low-leakage operation, disable unused peripherals and pin functions, and use the manufacturer low-power guidance to establish wake-up timing. Battery life must be evaluated with the actual sensor, communications, and indicator load.

🤖

Robotics and Condition Monitoring

MK20DX64VLH7 can serve as the local controller in a robot or condition-monitoring module that combines sensor fusion, event logic, and communications. The Cortex-M4 processing capability supports filtering and control algorithms, while the integrated analog functions allow several sensor inputs to be handled close to the processor. The 64-LQFP package provides a practical leaded footprint for industrial or service assemblies. Keep analog grounds and digital return currents organized, protect exposed sensor inputs from transients, and define deterministic watchdog and fault-response behavior. A larger-memory variant is preferable when logging or complex algorithms exceed the 64 KB code budget.

What are the key specifications of MK20DX64VLH7 that engineers should know?
The MK20DX64VLH7 is a 72 MHz ARM Cortex-M4 Kinetis K20 microcontroller with 64 KB of flash, 16 KB of SRAM, and a 64-LQFP package. According to the NXP manufacturer datasheet and product information, it operates from 1.71 V to 3.6 V and provides integrated analog, communication, timing, and control peripherals. The 10 x 10 mm gull-wing package supports conventional surface-mount assembly and provides 64 externally accessible terminals for the integrated functions.
What is the operating voltage of MK20DX64VLH7?
The MK20DX64VLH7 operates from 1.71 V to 3.6 V. This range comes from the NXP product listing and manufacturer documentation, and it makes the device appropriate for low-voltage embedded control systems. The design must keep every powered I/O terminal within its permitted voltage range, including during startup, power-down, and transient events. Use the manufacturer recommended decoupling network and verify signal compatibility with every connected peripheral.
Where can I download the MK20DX64VLH7 datasheet PDF?
Download the official MK20DX64VLH7 documentation from the NXP product page linked on this page. The manufacturer product page provides access to the device datasheet and supporting material. Use the pin-description and electrical-characteristics sections to assign package terminals, select power components, and confirm operating limits. A direct manufacturer PDF link is not reproduced here, so use the official product page to obtain the current document revision.
Where can I find the MK20DX64VLH7 pinout?
The MK20DX64VLH7 uses a 64-LQFP package, and its complete terminal assignment is documented in the NXP manufacturer datasheet and pin-muxing information. Start with the pin-connection table and the package drawing, then confirm each multiplexed signal before routing PCB tracks. Do not infer a terminal function from its position alone because several pins support multiple peripheral functions. The manufacturer pin table should be the controlling reference for the exact ordering code.
Is MK20DX64VLH7 suitable for industrial control applications?
Yes, MK20DX64VLH7 is suitable for industrial control applications because it is identified as industrial grade and combines a 72 MHz Cortex-M4 core with control, timing, communication, and precision analog resources. The 64 KB flash and 16 KB SRAM are appropriate for supervisory controllers, compact data loggers, and low-to-moderate-complexity embedded systems. Final suitability still depends on ambient temperature, isolation requirements, certification needs, and the reliability conditions of the completed equipment.
What can replace the MK20DX64VLH7?
The closest drop-in choices are same-package NXP Kinetis variants with compatible Cortex-M4 resources, including MK20DX128VLH7, MK20DX256VLH7, MK20DX32VLH7, MK21DX128VLH7, and MK21DX256VLH7. These alternatives change available memory or family-specific functions, so they are not functionally identical. Before replacing the device, compare the manufacturer pin tables, clock tree, peripheral mix, pin multiplexing, memory map, and firmware configuration rather than relying on package dimensions alone.
Is MK20DX64VLH7 the same as MK20DX128VLH7?
No, MK20DX64VLH7 and MK20DX128VLH7 differ in flash capacity: 64 KB versus 128 KB. Both belong to the Kinetis K20 family and use the stated 64-LQFP footprint, which makes the higher-density device a practical footprint-compatible upgrade when its other electrical and peripheral assignments are acceptable. The replacement does not require a smaller MCU. Firmware must still be checked for peripheral, interrupt, and memory-map compatibility.
MK20DX64VLH7 vs MK21DX128VLH7: which is better for a low-power design?
MK20DX64VLH7 is the better choice when the design prioritizes a straightforward K20 platform with 64 KB of flash, while MK21DX128VLH7 provides additional program memory and features from the related K21 family. The low-power decision should be based on the exact peripheral states, clock settings, and sleep modes listed for each device in the NXP documentation. Do not assume that the larger-memory alternative has identical standby behavior or an identical peripheral mix.
When should I choose MK20DX64VLH7 over MK20DX128VLH7?
Choose MK20DX64VLH7 when 64 KB of flash is sufficient and you want the established K20 feature set without carrying the higher-memory variant in the bill of materials. Choose MK20DX128VLH7 when code growth, additional libraries, or communication stacks require more program space. Both use the stated 64-LQFP package, but selection must also confirm that the required GPIO, analog, timer, communication, debug, and low-power features are equivalent.
Can MK20DX128VLH7 replace MK20DX64VLH7 in an existing PCB?
MK20DX128VLH7 can serve as a footprint-compatible upgrade candidate because it retains the 64-LQFP package and uses the same K20 product-family naming pattern. Its flash capacity increases from 64 KB to 128 KB, which is useful when existing firmware approaches the lower-density limit. Before soldering it into an existing design, verify the complete pin assignment, alternate functions, power behavior, boot configuration, and any firmware assumptions about memory size using the NXP manufacturer documentation.
Where can I buy MK20DX64VLH7 online?
Use the Request a Quote form on this page to request MK20DX64VLH7 pricing, stock confirmation, and lead time from XAIPART. The manufacturer identifies this exact ordering code as active. Quote requests are the appropriate route when current availability, volume pricing, or production scheduling must be confirmed for a specific bill of materials. Include the required quantity, date code, target packaging, and shipment destination when submitting the request.
What is the price of MK20DX64VLH7?
Current MK20DX64VLH7 pricing is available through the Request a Quote form on this page. Submit the required quantity, packaging preference, ship-to country, and target date so the commercial team can confirm the applicable supply position and quotation. The structured listing on this page is designed to update independently of engineering copy, which helps prevent an outdated price from appearing in technical purchasing decisions.
What is the lead time and stock status for MK20DX64VLH7?
Request the current lead time and stock status for MK20DX64VLH7 through the Request a Quote form on this page. NXP lists the exact device as active, but production planning still depends on order quantity, package format, date-code requirements, and current channel inventory. Include those details with the request so the quotation can reflect the manufacturing and fulfillment plan appropriate for the project rather than a generic availability estimate.
Is MK20DX64VLH7 in stock?
Use the Request a Quote form on this page to check current stock for MK20DX64VLH7. The NXP product page identifies the ordering code as active, while transactional availability can vary with quantity, package format, and date-code constraints. State the required quantity and whether reel, tray, or other approved packing is acceptable. The quotation response provides the most current confirmation for the requested production quantity.
What tools and peripherals should be used with MK20DX64VLH7?
Use a programming and debug interface supported by the NXP Kinetis K20 family, together with the device's manufacturer-defined debug and boot connections. The 64-LQFP implementation is also suitable for industrial I/O expansion using devices such as PCA9534APWR or PCF8574ADWR, subject to voltage compatibility. For precision measurement chains, parts such as ADS1262IPW may complement the MCU, but external ADC selection must follow the actual signal, accuracy, and interface requirements.

Datos de referencia de ingeniería para MK20DX64VLH7 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MK20DX64VLH7 for a 64-LQFP embedded design that needs a 72 MHz ARM Cortex-M4 core, 64 KB of flash, 16 KB of SRAM, and a 1.71 V to 3.6 V operating range. Select MK20DX128VLH7 when firmware growth requires 128 KB of flash, or MK20DX256VLH7 when application code, protocol stacks, or logging need 256 KB. MK20DX32VLH7 is only appropriate when the complete application fits within 32 KB. Consider MK21DX128VLH7 or MK21DX256VLH7 only after checking K21-specific peripheral, clock, low-power, and firmware differences. For every candidate, verify the exact pin assignment, alternate functions, debug and programming interface, boot configuration, and power requirements before approving a substitution.

Comparación con alternativas

Parámetro Este producto MK20DX128VLH7 MK20DX256VLH7 MK20DX32VLH7 MK21DX128VLH7 MK21DX256VLH7
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 64-LQFP (10x10 mm) 64-LQFP (10x10 mm) 64-LQFP (10x10 mm) 64-LQFP (10x10 mm) 64-LQFP (10x10 mm) 64-LQFP (10x10 mm)
Flash Memory 64 KB 128 KB 256 KB 32 KB 128 KB 256 KB
Product Family Kinetis K20 Kinetis K20 Kinetis K20 Kinetis K20 Kinetis K21 Kinetis K21

Diferenciadores clave

  • Provides a compact 64 KB configuration for embedded applications (frente a MK20DX32VLH7)
  • Avoids unnecessary memory capacity for moderate firmware loads (frente a MK20DX256VLH7)
  • Combines a 72 MHz Cortex-M4 core with a 64 KB memory footprint (frente a MK21DX128VLH7)

Notas de diseño

Design the supply network around the verified 1.71 V to 3.6 V operating range. Place the manufacturer's recommended bypass capacitors directly beside the device power terminals, minimize loop area, and account for voltage tolerance, startup ramp, and transient current. Separate sensitive analog and digital return paths where the layout guidance permits it. Verify brownout behavior, debug connection effects, and peripheral current before the board enters production.

Use the NXP package drawing and pin-muxing table as the controlling references for the 64-LQFP footprint. Check each signal's alternate-function mapping instead of assigning pins by familiarity with another Kinetis device. Keep programming, debug, and reset access reachable, preserve the required clock layout, and provide adequate copper and thermal pathways around the leaded package. Do not release the layout until every unused terminal has been reviewed.

Do not assume that a same-package Kinetis variant is firmware-compatible without checking the memory map, vector table, peripheral set, clock configuration, and startup code. The 32 KB alternative may not contain the current firmware, while the 128 KB and 256 KB alternatives may alter available peripheral functions. K21-family candidates require an especially careful hardware and software review. Update bootloader support and validate production programming before substituting any alternative.

Keep oscillator, precision analog, and communication routes away from switching power stages and high-current actuator traces. Match external network values to the manufacturer reference configurations, and avoid long unprotected analog inputs. Use a continuous ground reference under the device where the package and layout guidance allow it. For mixed-signal designs, establish a clear partition between sensing, digital processing, and power-return paths before assigning connector and component locations.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer product page identifies the device as active and provides environmental-quality information, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statuses are not included in the accessible product data.

Datos verificados el: 2026-11-19 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MK20DX64VLH7 datasheet MK20DX64VLH7 datasheet pdf MK20DX64VLH7 pinout MK20DX64VLH7 specifications NXP MK20DX64VLH7 MK20DX64VLH7 72MHz Cortex-M4 MK20DX64VLH7 64KB flash 16KB SRAM MK20DX64VLH7 LQFP-64 pinout MK20DX64VLH7 equivalent MK20DX64VLH7 replacement MK20DX64VLH7 vs MK20DX128VLH7 MK20DX64VLH7 industrial controller MK20DX64VLH7 price MK20DX64VLH7 stock MK20DX64VLH7 1.71V 3.6V

Componentes & términos relacionados

NXP Semiconductors MK20DX64VLH7 MK20DX128VLH7 MK20DX256VLH7 MK20DX32VLH7 MK21DX128VLH7 MK21DX256VLH7 ARM Cortex-M4 Kinetis K20 Kinetis K21 microcontroller embedded microcontroller 32-bit RISC processor semiconductor 64-LQFP LQFP package family gull-wing package surface mount 64 KB flash memory 16 KB SRAM 72 MHz clock 1.71 V to 3.6 V operating voltage ADC industrial automation smart metering
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ