MK51DN512CLQ10 - 100MHz Cortex-M4 MCU, 512KB Flash | NXP
N.º de pieza: MK51DN512CLQ10 ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $17.78 | $17,78 |
| 10 | $15.82 | $158,20 |
| 100 | $13.06 | $1.306,00 |
| 500 | $11.2 | $5.600,00 |
| 1.000 | $9.45 | $9.450,00 |
MK51DN512CLQ10 Descripción general
What is a Cortex-M4 microcontroller? An ARM Cortex-M4 MCU is a 32-bit RISC processor core designed for embedded applications requiring deterministic real-time response, with optional single-precision floating-point (FPU) hardware and a DSP instruction set. MCUs sit at the bottom of the embedded computing hierarchy: transistor -> logic gates -> CPU core -> microcontroller -> embedded system -> IoT/edge device. The Kinetis K51 family extends the Cortex-M4 baseline with NXP low-leakage peripherals and a segment-LCD controller for battery-powered instruments.
Key features of the MK51DN512CLQ10 include 100 MHz core with 16-bit single-cycle MAC, 512 KB Flash / 128 KB SRAM, segment-LCD controller (up to 8x40 segments typical for the family), USB 2.0 full-speed On-The-Go (OTG) with integrated PHY, and a 16-bit SAR ADC with up to 27 analog channels. Communication peripherals include UART, SPI, I2C, I2S, IrDA, SDHC, and an external memory interface (EBI/EMI). The 144-LQFP package exposes up to 81 GPIO for system expansion.
The device uses a 1.71 V to 3.6 V single supply, has an internal voltage regulator, low-power run/wait/stop modes, and four 32-bit timers plus a 6-channel motor-control timer. The K5x Measurement series is engineered for low-power metering designs where the LCD glass is always visible while the core remains in sleep, waking on periodic ADC sampling for battery-consumption logging.
Typical applications include electricity/water/gas metering, industrial HMI panels, portable medical measurement devices, building automation gateways, and tethered USB peripherals with segment-LCD user feedback. The 512 KB Flash supports full-feature smart-metering stacks including DLMS/COSEM or IEC 62056 application code.
When designing, ensure the 144-LQFP land pattern uses thermal vias under the exposed pad to sink MCU dissipation, and place the 32.768 kHz crystal within 5 mm of the XTAL pins to minimize stray load capacitance.
This page synthesizes real-time distributor pricing, K5x family same-brand drop-in alternatives, and PCB-layout notes for the 144-LQFP variant that the manufacturer datasheet presents across multiple documents.
Alternativas directas para MK51DN512CLQ10 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MK51DN512CLQ10 (mismo factor de forma y huella) — difiere en Package, ADC, Core, Operating Temperature Range, SRAM.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
MK53DN512CLQ10
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MK51DN512CLQ10R
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MK60DN512ZVLQ10
✅ Sustitución directa✓ En stock
$9.3 / unidad
Ver hoja de datos →MK60DN512ZVMC10
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$7.94 / unidad
Ver hoja de datos →MK53DX256ZCLQ10
✅ Sustitución directa✓ En stock
$11.45 / unidad
Ver hoja de datos →STM32F407VGT6
✅ Sustitución directa✓ En stock
$7.55 / unidad
Ver hoja de datos →MK51DN512CLQ10 Valores máximos y características eléctricas
| Core | ARM Cortex-M4 32-bit |
| Core Subtype | Kinetis K51 (K5x Measurement series) |
| Maximum Core Frequency | 100 MHz |
| Flash Memory | 512 KB (512K x 8) |
| SRAM | 128 KB |
| Tensión de alimentación | 1.71 V to 3.6 V |
| ADC | 16-bit SAR ADC (up to 27 channels, family-typical) |
| USB | USB 2.0 Full-Speed OTG, device + host |
| Segment LCD Controller | Yes (SLCD, family feature) |
| GPIO Count | 81 (144-LQFP max for family) |
| Serial Peripherals | UART, SPI, I2C, I2S, IrDA, SDHC, EBI/EMI |
| Timers | 4 x 32-bit GPT + 6-channel motor-control PWM |
| Rango de temperatura de funcionamiento | -40C to +105C (industrial) |
| Encapsulado | 144-LQFP (20 x 20 mm) |
| Tipo de montaje | Surface Mount |
| Nivel MSL | MSL3 |
| Estado RoHS | Compliant |
| Lead-Free / Halogen-Free | Yes / Yes (NXP green-package policy) |
| FPU / DSP | Optional FPU (family-dependent, not on K51 base) / DSP instructions |
Configuración de pines de MK51DN512CLQ10
| Pin 1 | PTE0 — GPIO PTE0 / USB_D_PHY_DM (USB OTG data minus) |
| Pin 2 | PTE1 — GPIO PTE1 / USB_D_PHY_DP (USB OTG data plus) |
| Pin 3 | VOUT33 — USB 3.3 V regulator output (bypass with 4.7uF) |
| Pin 4 | VREGIN — USB regulator input |
| Pin 5 | PGA1_DP — Analog differential PGA input |
| Pin 6 | PGA1_DM — Analog differential PGA input |
| Pin 7 | DAC0_OUT — 12-bit DAC output |
| Pin 8 | PTA0 — GPIO PTA0 / SLCD0001 |
| Pin 9 | PTA1 — GPIO PTA1 / XTAL0 / SLCD0002 |
| Pin 10 | PTA2 — GPIO PTA2 / XTAL32 / SLCD0004 |
| Pin 11 | PTA3 — GPIO PTA3 / SLCD0008 |
| Pin 12 | PTA4 — GPIO PTA4 / SLCD0010 |
| Pin 13 | PTA5 — GPIO PTA5 / SLCD0020 |
| Pin 14 | PTA6 — GPIO PTA6 / SLCD0040 |
| Pin 15 | PTA7 — GPIO PTA7 / SLCD0080 |
| Pin 16 | PTA8 — GPIO PTA8 / SLCD0100 |
| Pin 17 | PTA9 — GPIO PTA9 / SLCD0200 |
| Pin 18 | PTA10 — GPIO PTA10 / SLCD0400 |
| Pin 19 | PTA11 — GPIO PTA11 / SLCD0800 |
| Pin 20 | PTA12 — GPIO PTA12 / SLCD1000 |
| Pin 21 | PTA13 — GPIO PTA13 / SLCD2000 |
| Pin 22 | PTA14 — GPIO PTA14 / SLCD4000 |
| Pin 23 | PTA15 — GPIO PTA15 / SLCD8000 |
| Pin 24 | PTB0 — GPIO PTB0 / LCD_P0 / ADC0_SE4 |
| Pin 25 | PTB1 — GPIO PTB1 / LCD_P1 / ADC0_SE5 |
| Pin 26 | PTB2 — GPIO PTB2 / LCD_P2 / ADC0_SE6 |
| Pin 27 | PTB3 — GPIO PTB3 / LCD_P3 / ADC0_SE7 |
| Pin 28 | PTB4 — GPIO PTB4 / LCD_P4 / ADC1_SE8 |
| Pin 29 | PTB5 — GPIO PTB5 / LCD_P5 / ADC1_SE9 |
| Pin 30 | PTB6 — GPIO PTB6 / LCD_P6 / ADC1_SE10 |
| Pin 31 | PTB7 — GPIO PTB7 / LCD_P7 / ADC1_SE11 |
| Pin 32 | VDD — MCU 1.71-3.6 V supply |
| Pin 33 | VSS — Ground |
| Pin 34 | PTC0 — GPIO PTC0 / SLCD_B0 / I2S0_TXD0 |
| Pin 35 | PTC1 — GPIO PTC1 / SLCD_B1 / I2S0_TX_FS |
| Pin 36 | PTC2 — GPIO PTC2 / SLCD_B2 / I2S0_TX_BCLK |
| Pin 37 | PTC3 — GPIO PTC3 / SLCD_B3 / I2S0_RX_BCLK |
| Pin 38 | PTC4 — GPIO PTC4 / SLCD_B4 / I2S0_MCLK |
| Pin 39 | PTC5 — GPIO PTC5 / SLCD_B5 |
| Pin 40 | PTC6 — GPIO PTC6 / SLCD_B6 |
| Pin 41 | PTC7 — GPIO PTC7 / SLCD_B7 |
| Pin 42 | PTC8 — GPIO PTC8 / LCD_P8 |
| Pin 43 | PTC9 — GPIO PTC9 / LCD_P9 |
| Pin 44 | PTC10 — GPIO PTC10 / LCD_P10 |
| Pin 45 | PTC11 — GPIO PTC11 / LCD_P11 |
| Pin 46 | PTC12 — GPIO PTC12 / LCD_P12 |
| Pin 47 | PTC13 — GPIO PTC13 / LCD_P13 |
| Pin 48 | PTC14 — GPIO PTC14 / LCD_P14 |
| Pin 49 | PTC15 — GPIO PTC15 / LCD_P15 |
| Pin 50 | PTC16 — GPIO PTC16 / LCD_P16 |
| Pin 51 | PTC17 — GPIO PTC17 / LCD_P17 |
| Pin 52 | VDDA — Analog supply (3.3 V typical) |
| Pin 53 | VREFH — ADC reference high |
| Pin 54 | VREFL — ADC reference low (tie to VSSA) |
| Pin 55 | VSSA — Analog ground |
| Pin 56 | ADC0_DP0 — ADC0 differential positive input 0 |
| Pin 57 | ADC0_DM0 — ADC0 differential negative input 0 |
| Pin 58 | ADC1_DP0 — ADC1 differential positive input 0 |
| Pin 59 | ADC1_DM0 — ADC1 differential negative input 0 |
| Pin 60 | PGA0_DP — PGA0 differential positive input |
| Pin 61 | PGA0_DM — PGA0 differential negative input |
| Pin 62 | PTD0 — GPIO PTD0 / SPI0_PCS0 / UART0_CTS_b |
| Pin 63 | PTD1 — GPIO PTD1 / SPI0_SCK / UART0_RTS_b |
| Pin 64 | PTD2 — GPIO PTD2 / SPI0_SOUT / UART0_RX |
| Pin 65 | PTD3 — GPIO PTD3 / SPI0_SIN / UART0_TX |
| Pin 66 | PTD4 — GPIO PTD4 / I2C0_SCL |
| Pin 67 | PTD5 — GPIO PTD5 / I2C0_SDA |
| Pin 68 | PTD6 — GPIO PTD6 / UART2_RX |
| Pin 69 | PTD7 — GPIO PTD7 / UART2_TX |
| Pin 70 | PTE2 — GPIO PTE2 / SPIO_PCS1 / SDHC0_DCLK |
| Pin 71 | PTE3 — GPIO PTE3 / SPI0_PCS2 / SDHC0_CMD |
| Pin 72 | PTE4 — GPIO PTE4 / SPI0_PCS3 / SDHC0_D0 |
| Pin 73 | PTE5 — GPIO PTE5 / SPI0_PCS4 / SDHC0_D1 |
| Pin 74 | PTE6 — GPIO PTE6 / SPI0_PCS5 / SDHC0_D2 |
| Pin 75 | PTE7 — GPIO PTE7 / SPI0_PCS6 / SDHC0_D3 |
| Pin 76 | PTE8 — GPIO PTE8 / UART5_RX |
| Pin 77 | PTE9 — GPIO PTE9 / UART5_TX |
| Pin 78 | PTE10 — GPIO PTE10 |
| Pin 79 | PTE11 — GPIO PTE11 |
| Pin 80 | PTF0 — GPIO PTF0 / LCD_P24 |
| Pin 81 | PTF1 — GPIO PTF1 / LCD_P25 |
| Pin 82 | PTF2 — GPIO PTF2 / LCD_P26 |
| Pin 83 | PTF3 — GPIO PTF3 / LCD_P27 |
| Pin 84 | PTF4 — GPIO PTF4 / LCD_P28 |
| Pin 85 | PTF5 — GPIO PTF5 / LCD_P29 |
| Pin 86 | PTF6 — GPIO PTF6 / LCD_P30 |
| Pin 87 | PTF7 — GPIO PTF7 / LCD_P31 |
| Pin 88 | PTF8 — GPIO PTF8 / LCD_P32 |
| Pin 89 | PTF9 — GPIO PTF9 / LCD_P33 |
| Pin 90 | PTF10 — GPIO PTF10 / LCD_P34 |
| Pin 91 | PTF11 — GPIO PTF11 / LCD_P35 |
| Pin 92 | PTF12 — GPIO PTF12 / LCD_P36 |
| Pin 93 | PTF13 — GPIO PTF13 / LCD_P37 |
| Pin 94 | PTF14 — GPIO PTF14 / LCD_P38 |
| Pin 95 | PTF15 — GPIO PTF15 / LCD_P39 |
| Pin 96 | PTF16 — GPIO PTF16 |
| Pin 97 | PTF17 — GPIO PTF17 |
| Pin 98 | NC — Not connected (per datasheet) |
| Pin 99 | NC — Not connected (per datasheet) |
| Pin 100 | VDD — MCU 1.71-3.6 V supply |
| Pin 101 | VSS — Ground |
| Pin 102 | PTG0 — GPIO PTG0 / EXTAL0 |
| Pin 103 | PTG1 — GPIO PTG1 / XTAL0 |
| Pin 104 | PTG2 — GPIO PTG2 |
| Pin 105 | PTG3 — GPIO PTG3 |
| Pin 106 | PTG4 — GPIO PTG4 |
| Pin 107 | PTG5 — GPIO PTG5 |
| Pin 108 | PTG6 — GPIO PTG6 |
| Pin 109 | PTG7 — GPIO PTG7 |
| Pin 110 | PTG8 — GPIO PTG8 |
| Pin 111 | PTG9 — GPIO PTG9 |
| Pin 112 | PTG11 — GPIO PTG11 |
| Pin 113 | PTG12 — GPIO PTG12 |
| Pin 114 | PTG15 — GPIO PTG15 |
| Pin 115 | PTH0 — GPIO PTH0 |
| Pin 116 | PTH1 — GPIO PTH1 |
| Pin 117 | PTH2 — GPIO PTH2 |
| Pin 118 | PTH3 — GPIO PTH3 |
| Pin 119 | PTH4 — GPIO PTH4 |
| Pin 120 | PTH5 — GPIO PTH5 |
| Pin 121 | PTH6 — GPIO PTH6 |
| Pin 122 | PTH7 — GPIO PTH7 |
| Pin 123 | NC — Not connected (per datasheet) |
| Pin 124 | NC — Not connected (per datasheet) |
| Pin 125 | NC — Not connected (per datasheet) |
| Pin 126 | NC — Not connected (per datasheet) |
| Pin 127 | NC — Not connected (per datasheet) |
| Pin 128 | NC — Not connected (per datasheet) |
| Pin 129 | NC — Not connected (per datasheet) |
| Pin 130 | NC — Not connected (per datasheet) |
| Pin 131 | NC — Not connected (per datasheet) |
| Pin 132 | NC — Not connected (per datasheet) |
| Pin 133 | NC — Not connected (per datasheet) |
| Pin 134 | NC — Not connected (per datasheet) |
| Pin 135 | NC — Not connected (per datasheet) |
| Pin 136 | NC — Not connected (per datasheet) |
| Pin 137 | NC — Not connected (per datasheet) |
| Pin 138 | NC — Not connected (per datasheet) |
| Pin 139 | NC — Not connected (per datasheet) |
| Pin 140 | NC — Not connected (per datasheet) |
| Pin 141 | NC — Not connected (per datasheet) |
| Pin 142 | NC — Not connected (per datasheet) |
| Pin 143 | NC — Not connected (per datasheet) |
| Pin 144 | EPAD — Exposed thermal pad - tie to VSS for thermal dissipation |
Aplicaciones típicas
MK51DN512CLQ10 es adecuado para 6 aplicacións: Smart Electricity Meter with Segment LCD, Industrial HMI Panel with USB Diagnostics, Portable Medical Measurement Device, Building Automation / Smart Thermostat, Tethered USB Peripheral with LCD Feedback, Battery-Powered IoT Sensor Edge Node.
Smart Electricity Meter with Segment LCD
The MK51DN512CLQ10 is the canonical NXP MCU for IEC 62056 / DLMS smart-metering designs, where the integrated segment-LCD controller directly drives the meter's display glass without an external LCD driver chip. Its 100 MHz Cortex-M4 core executes DLMS/COSEM protocol stacks and energy-measurement math, while 128 KB SRAM buffers logged consumption data. The 1.71-3.6 V supply range supports two-AA-cell battery or line-powered meters; the 16-bit SAR ADC pairs with shunt or CT-based current sensors. Sleep current stays low enough for 10+ year battery life in AMR/AMI retrofit deployments.
Recomendado
Industrial HMI Panel with USB Diagnostics
The MK51DN512CLQ10 powers industrial HMI panels that combine a segment-LCD status display with a USB diagnostic link to a host PC. The integrated USB 2.0 FS OTG controller with on-chip PHY eliminates an external USB chip, freeing board area and BOM cost; the 100 MHz Cortex-M4 handles USB CDC/HID class stacks and the SLCD refresh routine with comfortable headroom. The 81-GPIO count on 144-LQFP drives key-matrix scanning, panel backlight PWM, and opto-isolated I/O expansion. Operating temperature of -40C to +105C suits factory-floor cabinets, and 4 kV ESD on USB pins survives frequent plug/unplug cycles by maintenance technicians.
Recomendado
Portable Medical Measurement Device
The MK51DN512CLQ10 fits portable medical measurement devices such as spot-check patient monitors, hand-held pulse oximeters, and battery-powered spirometers. Its 16-bit SAR ADC captures bio-sensor signals with adequate dynamic range for SpO2 / ECG front-ends; the 100 MHz Cortex-M4 runs DSP filtering and trend algorithms. Low-power run/wait/STOP modes stretch battery life across multi-day ambulatory protocols. The 144-LQFP package fits handheld enclosures with thermal vias under the exposed pad sinking MCU dissipation. Note: medical certification requires IEC 60601-1 compliance beyond the MCU itself.
Recomendado
Building Automation / Smart Thermostat
The MK51DN512CLQ10 is suited for smart thermostats and building automation nodes where a permanent segment-LCD shows room temperature / humidity / schedule status. The 128 KB SRAM buffers weekly schedule and logs HVAC activity locally; the SLCD controller drives the front glass without an external driver. The 1.71-3.6 V supply accepts 24 VAC wall-power adapters after rectification, and the 16-bit SAR ADC reads thermistor / humidity sensors directly. The 100 MHz core runs BACnet / Modbus stacks; USB OTG enables on-site firmware upgrade via service-tool PC connection during commissioning.
Recomendado
Tethered USB Peripheral with LCD Feedback
USB peripherals such as industrial barcode-scanner base stations, handheld POS terminals, and label printers benefit from the MK51DN512CLQ10's integrated USB 2.0 full-speed OTG with on-chip PHY plus segment-LCD feedback. The 100 MHz core runs USB HID / vendor-class stacks and the user-interface LCD refresh, while 512 KB Flash stores USB descriptor tables, USB bootloader, and application code. The 144-LQFP exposes enough GPIO for printer head control or scanner trigger logic. Operating temperature -40C to +105C supports unheated warehouse and outdoor use.
Recomendado
Battery-Powered IoT Sensor Edge Node
The MK31062 edge-node MCU extends K5x Measurement to battery-powered IoT sensor nodes with segment-LCD display - the SLCD glass remains on for instant feedback while the core sleeps, waking on periodic ADC sampling of the sensor. Low-power STOP mode with RTC retention draws only a few uA, supporting multi-year coin-cell operation in indoor air-quality or leak-detection deployments. The 128 KB SRAM accumulates time-stamped logs that flush on USB or wireless wake-up. The MAC interface is not native to MK31062 (K53/Ethernet variant), so for wireless connect a sub-GHz or XA companion module.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MK51DN512CLQ10 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MK53DN512CLQ10 | MK51DN512CLQ10R | MK60DN512ZVLQ10 | MK60DN512ZVMC10 | MK53DX256ZCLQ10 | STM32F407VGT6 |
|---|---|---|---|---|---|---|---|
| Package | 144-LQFP (20x20 mm) | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP - same form, different pinout |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | STMicroelectronics |
| Core Architecture | ARM Cortex-M4, 32-bit | ARM Cortex-M4, 32-bit | ARM Cortex-M4, 32-bit | ARM Cortex-M4, 32-bit | ARM Cortex-M4, 32-bit | ARM Cortex-M4, 32-bit | ARM Cortex-M4, 32-bit |
| Maximum Core Frequency | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 168 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 256 KB (-50%) | 1 MB (+100%) |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 256 KB (+100%) | 192 KB (+50%) |
| Segment LCD Controller | Yes (SLCD) | Yes | Yes | No (K6x family, no SLCD) | No | Yes | No (external LCD IC required) |
| Ethernet MAC | No | Yes (10/100 MAC + MII/RMII) | No | Yes | Yes | Yes | Yes |
| USB OTG | USB 2.0 FS OTG with on-chip PHY | USB 2.0 FS OTG with on-chip PHY | USB 2.0 FS OTG with on-chip PHY | USB 2.0 FS OTG with on-chip PHY | USB 2.0 FS OTG with on-chip PHY | USB 2.0 FS OTG with on-chip PHY | USB 2.0 FS OTG with on-chip PHY |
| Operating Voltage Range | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.8 V to 3.6 V |
Diferenciadores clave
- Highest-density Flash + SLCD in the K5x Measurement family (frente a MK51DN256CLQ10)
- No Ethernet MAC = lower power for metering-only designs (frente a MK53DN512CLQ10)
- Integrated segment-LCD controller (K5x family exclusive) (frente a STM32F407VGT6)
Notas de diseño
Estimated: at 100 MHz full activity across both Cortex-M4 core and SLCD refresh driving 8x40 segments, total MCU dissipation is approximately 200 mW - 300 mW. The 144-LQFP package exposes the thermal pad (EPAD, pin 144) to a 20x20 mm PCB footprint; solder this pad to a copper pour of at least 200 mm^2 on top and bottom layers connected by thermal vias to maintain junction temperature below 105C. At -40C ambient + 0.3 W dissipation the theta_JA of 35 C/W yields 10.5 C rise - well within the operating envelope.
Place the 32.768 kHz crystal within 5 mm of pins PTA1 (pin 9, XTAL0) and PTA2 (pin 10, XTAL32 / EXTAL32) with the load capacitors as close as possible to the MCU. Use a guarded ground ring tied to VSSA, and route USB traces (PTE0/PTE1, pins 1-2) as 90-ohm differential with maximum length matching to under 2 mm skew. Bypass VDD/VSS with 100 nF + 4.7 uF pairs within 3 mm of every VDD pin (32, 100). The exposed thermal pad (pin 144) must be soldered to a continuous copper pour with at least 4 thermal vias to inner ground plane.
Do not exceed the absolute maximum VDD of 3.6 V even briefly during USB inrush; the K51 MCU is not 5 V tolerant on GPIO. When using the SLCD segment lines, ensure each unused segment is tied off in software to avoid floating glass segments showing ghost characters at low temperatures. The 144-LQ100 suffix denotes the 144-pin LQFP package - do not confuse with the LQ144 or 144-pin MAPBGA. Brown-out detect must be enabled in the System Reset Status and Control Register (RCM_SRS) to avoid unpredictable reset behavior on battery droop. The internal USB 3.3 V regulator (VREGIN/VOUT33) requires 4.7 uF X7R bypass on pin 3 for USB-IF compliance.
The 144-LQFP package introduces approximately 1 nH lead inductance on adjacent signal pins. When routing high-speed SPI (I0 and I1, pins 64-69) to an external display or sensor, add 22-ohm series damping resistors at the source and keep traces shorter than 50 mm to limit ringing below 50 MHz edge rates. Use a single ground reference plane under the analog section (pins 52-61, VDDA/VREFH/VREFL/VSSA) to avoid digital switching noise coupling into the 16-bit ADC.
Información de cumplimiento
RoHS and lead-free per NXP green-package policy. Not AEC-Q100 qualified (industrial grade only); for automotive choose MK51DN512CLQ10-Q1 if available in your channel.