MKL15Z64VLK4 - 48MHz Cortex-M0+ 64KB MCU | NXP
N.º de pieza: MKL15Z64VLK4 ✓ ActivoMKL15Z64VLK4 Descripción general
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one package. The MKL15Z64VLK4 belongs to the Cortex-M0+ -> 32-bit RISC microcontroller -> embedded processor -> semiconductor hierarchy. Its compact 80-LQFP construction gives embedded designers access to general-purpose I/O and communication functions without requiring a separate external USB transceiver.
The principal performance characteristics are a 48 MHz ARM Cortex-M0+ processor, 64 KB of Flash storage, and operation from 1.8 V, 2.5 V, or 3.3 V. NXP describes the part as an ultra-low-power device with USB connectivity and integrated peripherals for real-time embedded applications. These characteristics make it useful where deterministic control, modest program storage, and USB device support are required within a relatively small PCB footprint.
The 80-LQFP package provides 80 terminal positions and a 12 x 12 mm body size. Its pin count offers more interface access than smaller microcontroller packages, which can reduce the need for external I/O expanders. The Gull Wing terminal form and square package shape also support conventional PCB assembly processes, although the exposed thermal behavior and routing density require careful layout review.
Typical applications include USB-connected data acquisition, compact industrial controls, USB-to-serial or USB-to-GPIO accessories, sensor-interface nodes, and low-power embedded instrumentation. The 64 KB Flash capacity is suitable for compact control firmware, while the integrated USB interface can simplify host connectivity when the product requires enumeration, data transfer, or configuration over USB.
Designers should confirm the complete pin assignment, alternate-function multiplexing, and power requirements from the NXP datasheet before layout. The device's multi-voltage capability does not remove the need for careful rail sequencing and decoupling, and USB signal routing should use controlled-impedance routing. Firmware development should also account for the limited 64 KB program-storage budget when application code, USB descriptors, and real-time control routines are combined.
This product record combines the exact catalog identity, package and performance details, traceable manufacturer and distributor references, practical integration guidance, and strictly filtered drop-in alternatives. It is intended to help engineers evaluate PCB reuse, firmware constraints, power architecture, and connector requirements before committing MKL15Z64VLK4 to a new embedded design.
Alternativas directas para MKL15Z64VLK4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MKL15Z64VLK4 (mismo factor de forma y huella) — difiere en Product Type, Flash Memory, Package, Architecture.
MKL15Z64VLH4
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MKL16Z64VLH4
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MKL14Z32VLK4
✅ Sustitución directaConsulte el precio
Ver hoja de datos →MKL15Z32VLK4
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →MKL15Z128VLK4
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MKL15Z64VLK4 Valores máximos y características eléctricas
| Product Type | 32-bit RISC microcontroller |
| Processor Core | ARM Cortex-M0+ |
| Series | Kinetis KL1 |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB (64K x 8) |
| Tensión de alimentación de funcionamiento | 1.8 V to 3.3 V |
| Supported Supply Levels | 1.8 V / 2.5 V / 3.3 V |
| Architecture | 32-bit ARM RISC |
| Interfaz | USB |
| Power Class | Ultra-low-power |
| Encapsulado | 80-LQFP (12 x 12 mm) |
| Terminal Count | 80 terminals |
| Tipo de montaje | Surface mount |
| Terminal Form | Gull Wing |
| Package Shape | Square |
| Package Code | LFQFP |
| Temperature Grade | Industrial |
| Automotive Qualification | AEC-Q100 |
Guía de configuración de pines de MKL15Z64VLK4 lfqfp
Configuración de pines para MKL15Z64VLK4 (encapsulado lfqfp). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para MKL15Z64VLK4.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MKL15Z64VLK4 es adecuado para 6 aplicacións: USB Data-Acquisition Node, Industrial Control Module, USB-to-Serial Adapter, Portable Sensor Interface, USB Configuration Interface, Compact Embedded Instrument.
USB Data-Acquisition Node
The MKL15Z64VLK4 fits a USB data-acquisition node because it combines a 48 MHz ARM Cortex-M0+ processor with an integrated USB interface in an 80-LQFP package. The MCU can sample sensors, format measurements, and transfer data to a host without a separate USB transceiver. Its 64 KB Flash budget supports compact acquisition firmware and USB descriptors, although interrupt-driven sampling, descriptor storage, and application code must be budgeted carefully. USB impedance-controlled routing and solid grounding are required because signal integrity directly affects enumeration reliability and transfer stability.
Recomendado
Industrial Control Module
The MKL15Z64VLK4 is suitable for a compact industrial control module that must combine deterministic processing with multiple external interfaces. Its 48 MHz Cortex-M0+ core supports responsive control loops, while the 80-pin LQFP offers more I/O opportunities than smaller MCU packages and can reduce the need for an expander. The 1.8 V to 3.3 V operating range supports low-voltage embedded systems, but industrial designs should verify timing margins, temperature behavior, and peripheral availability before production release.
Recomendado
USB-to-Serial Adapter
A USB-to-serial adapter can use the MKL15Z64VLK4 to translate USB traffic into a serial interface while adding configuration storage and device control. The integrated USB interface removes the need for a separate transceiver, and the 64 KB Flash capacity is sufficient for a focused firmware image containing a USB stack, serial bridge logic, and configuration commands. Designers should reserve memory for boot code and future descriptors, and should verify the selected UART pins and alternate functions in the manufacturer pin-description table before fixing the board layout.
Recomendado
Portable Sensor Interface
The MKL15Z64VLK4 fits a portable sensor interface where USB provides configuration and data access while the MCU handles local acquisition. Its ultra-low-power positioning is valuable in battery-operated equipment, and operation from 1.8 V to 3.3 V provides flexibility for compact sensor platforms. The 80-LQFP package may be larger than necessary for a minimal wearable, but it offers extensive peripheral access for sensor triggers, status indicators, and digital controls. Power-budget calculations should include both active processing and USB attachment states.
Recomendado
USB Configuration Interface
The MKL15Z64VLK4 can implement a USB configuration interface for an embedded product that needs field programming, device identification, or runtime parameter updates. USB enumeration permits a host to query the product and update configuration without adding a separate communications processor. The 48 MHz Cortex-M0+ core is more than adequate for a focused configuration task, while 64 KB of Flash must accommodate the firmware image, USB descriptors, and version metadata. A robust firmware-update process should validate image integrity before replacing the active configuration.
Recomendado
Compact Embedded Instrument
The MKL15Z64VLK4 suits a compact embedded instrument that needs local control, USB communication, and enough interface capacity for sensors or actuators. The 48 MHz processor provides real-time execution capability, while the 80-pin package supports a broader external interface than a low-pin-count microcontroller. The 64 KB Flash limit should be checked against instrument firmware, calibration tables, and USB protocol code. Analog measurement accuracy is determined by the external signal chain, so careful reference, grounding, and decoupling design remain necessary around the MCU.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MKL15Z64VLK4 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MKL15Z64VLH4 | MKL16Z64VLH4 | MKL14Z32VLK4 | MKL15Z32VLK4 | MKL15Z128VLK4 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 80-LQFP (12 x 12 mm) | 80-LQFP (12 x 12 mm) | 80-LQFP (12 x 12 mm) | 80-LQFP (12 x 12 mm) | 80-LQFP (12 x 12 mm) | 80-LQFP (12 x 12 mm) |
| Flash Memory | 64 KB | 64 KB | 64 KB | 32 KB | 32 KB | 128 KB |
Diferenciadores clave
- Balances 64 KB Flash with 80-pin interface density (frente a MKL14Z32VLK4)
- Provides more program storage than the 32 KB same-package option (frente a MKL15Z32VLK4)
- Uses less Flash than the 128 KB same-package alternative (frente a MKL15Z128VLK4)
- Targets the same 64 KB memory class as the direct suffix alternative (frente a MKL15Z64VLH4)
Notas de diseño
Create the PCB land pattern from the NXP 80-LQFP mechanical drawing rather than scaling a generic 80-pin drawing by pin count. Preserve the manufacturer-specified pad dimensions, solder-mask clearance, and exposed thermal arrangement if present. Place decoupling capacitors adjacent to the relevant power terminals and route them through a quiet return path to reduce supply transients during USB transmit and switching activity.
Route USB D+ and D- as a controlled-impedance differential pair with continuous reference-plane support, minimal stubs, and no unnecessary test pads. Keep the connector, protection components, and MCU connection in a compact path. Follow the manufacturer layout guidance for separation from noisy switching nodes and provide a short, low-impedance ground connection around the USB interface.
Do not assume that two devices with the same physical package are automatically interchangeable. Before substituting an alternative, compare the complete pin table, alternate-function muxing, USB peripheral details, clock sources, peripheral availability, memory organization, and device-driver support. The 64 KB Flash limit also requires a firmware size budget that includes USB descriptors, bootloader functions, stack growth, and update metadata.
Design the supply for the selected 1.8 V, 2.5 V, or 3.3 V operating level and verify USB attachment current against the device's applicable electrical limits. Separate noisy return currents from the MCU and USB reference paths, and use local bulk and high-frequency decoupling where required. Power sequencing and brownout behavior must also be reviewed when the MCU shares a rail with sensors or actuators.
Información de cumplimiento
The Arrow catalog result identifies the device with AEC-Q100 automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the cited records.