NXP Semiconductors

MKL15Z64VLK4 - 48MHz Cortex-M0+ 64KB MCU | NXP

MPN: MKL15Z64VLK4 ✓ Aktif
1.8 V to 3.3 V Vdss 80-LQFP (12 x 12 mm) Package 48 MHz Speed 64 KB (64K x 8) Memory
MOQ: 1 |

MKL15Z64VLK4 Ringkasan

The NXP Semiconductors MKL15Z64VLK4 is an ultra-low-power Kinetis KL1 microcontroller with an ARM Cortex-M0+ core, 48 MHz operating frequency, and 64 KB of Flash memory in an 80-pin LQFP package measuring 12 x 12 mm. It is designed for compact embedded systems requiring real-time control, USB connectivity, and integrated peripherals. The device operates from a 1.8 V to 3.3 V supply range and is identified as an industrial-temperature, AEC-Q100-capable option in catalog listings.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one package. The MKL15Z64VLK4 belongs to the Cortex-M0+ -> 32-bit RISC microcontroller -> embedded processor -> semiconductor hierarchy. Its compact 80-LQFP construction gives embedded designers access to general-purpose I/O and communication functions without requiring a separate external USB transceiver.

The principal performance characteristics are a 48 MHz ARM Cortex-M0+ processor, 64 KB of Flash storage, and operation from 1.8 V, 2.5 V, or 3.3 V. NXP describes the part as an ultra-low-power device with USB connectivity and integrated peripherals for real-time embedded applications. These characteristics make it useful where deterministic control, modest program storage, and USB device support are required within a relatively small PCB footprint.

The 80-LQFP package provides 80 terminal positions and a 12 x 12 mm body size. Its pin count offers more interface access than smaller microcontroller packages, which can reduce the need for external I/O expanders. The Gull Wing terminal form and square package shape also support conventional PCB assembly processes, although the exposed thermal behavior and routing density require careful layout review.

Typical applications include USB-connected data acquisition, compact industrial controls, USB-to-serial or USB-to-GPIO accessories, sensor-interface nodes, and low-power embedded instrumentation. The 64 KB Flash capacity is suitable for compact control firmware, while the integrated USB interface can simplify host connectivity when the product requires enumeration, data transfer, or configuration over USB.

Designers should confirm the complete pin assignment, alternate-function multiplexing, and power requirements from the NXP datasheet before layout. The device's multi-voltage capability does not remove the need for careful rail sequencing and decoupling, and USB signal routing should use controlled-impedance routing. Firmware development should also account for the limited 64 KB program-storage budget when application code, USB descriptors, and real-time control routines are combined.

This product record combines the exact catalog identity, package and performance details, traceable manufacturer and distributor references, practical integration guidance, and strictly filtered drop-in alternatives. It is intended to help engineers evaluate PCB reuse, firmware constraints, power architecture, and connector requirements before committing MKL15Z64VLK4 to a new embedded design.

Pilihan pengganti yang segera untuk MKL15Z64VLK4 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera MKL15Z64VLK4 (sama faktor bentuk dan kaki) — berbeza dalam Product Type, Flash Memory, Package, Architecture.

NXP Semiconductors
Product Type: 32-bit microcontroller
Flash Memory: 32 KB (32K x 8)
Architecture: 32-bit
Bandingkan Dengan MKL15Z64VLK4 →
NXP Semiconductors
Product Type: 32-bit ARM Cortex-M0+ microcontroller
Flash Memory: 32 KB (32K x 8)
Package: 80-LQFP, 12 mm x 12 mm
Bandingkan Dengan MKL15Z64VLK4 →

MKL15Z64VLH4

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 80-LQFP (12 x 12 mm)
Same 64 KB memory class and 80-LQFP footprint; ordering suffix differs, requiring temperature and clocking verification

📋 Alternatif rujukan (tidak dalam katalog)

MKL16Z64VLH4

✅ Masuk Drop-In
📦 80-LQFP (12 x 12 mm)
Same 64 KB Flash class and 80-LQFP footprint; KL16 family features differ by up to 10% in key parameters

📋 Alternatif rujukan (tidak dalam katalog)

MKL14Z32VLK4

✅ Masuk Drop-In
NXP Semiconductors
📦 80-LQFP (12 x 12 mm)
32-bit microcontroller · Kinetis KL1 · Arm Cortex-M0+ · 32-bit · 48 MHz · 32 KB (32K x 8) · 4 KB · 80-LQFP (12 x 12 mm)

Hubungi untuk harga

Lihat Datasheet →

MKL15Z32VLK4

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
NXP Semiconductors
📦 80-LQFP (12 x 12 mm)
32-bit ARM Cortex-M0+ microcontroller · 48 MHz · 32 KB (32K x 8) · 4 KB · Arm Cortex-M0+ · 32-bit ARM · USB device controller · Flexible clock options

Hubungi untuk harga

Lihat Datasheet →

MKL15Z128VLK4

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 80-LQFP (12 x 12 mm)
Flash memory is 128 KB versus 64 KB, a 100% increase; package and Cortex-M0+ architecture are retained

📋 Alternatif rujukan (tidak dalam katalog)

MKL15Z64VLK4 Penilaian maksimum & Ciri-ciri Elektrik

Product Type 32-bit RISC microcontroller
Processor Core ARM Cortex-M0+
Series Kinetis KL1
Maximum CPU Frequency 48 MHz
Flash Memory 64 KB (64K x 8)
Tegangan Pemberi Arus Operasi 1.8 V to 3.3 V
Supported Supply Levels 1.8 V / 2.5 V / 3.3 V
Architecture 32-bit ARM RISC
Antaramuka USB
Power Class Ultra-low-power
Kemasan 80-LQFP (12 x 12 mm)
Terminal Count 80 terminals
Jenis Pemasangan Surface mount
Terminal Form Gull Wing
Package Shape Square
Package Code LFQFP
Temperature Grade Industrial
Automotive Qualification AEC-Q100

Panduan Konfigurasi Pin MKL15Z64VLK4 lfqfp

Konfigurasi pin untuk MKL15Z64VLK4 (lfqfp pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai lfqfp untuk MKL15Z64VLK4

Tiada data garisan pin yang diperoleh untuk MKL15Z64VLK4.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MKL15Z64VLK4 patut untuk 6 aplikasis: USB Data-Acquisition Node, Industrial Control Module, USB-to-Serial Adapter, Portable Sensor Interface, USB Configuration Interface, Compact Embedded Instrument.

🖥️

USB Data-Acquisition Node

The MKL15Z64VLK4 fits a USB data-acquisition node because it combines a 48 MHz ARM Cortex-M0+ processor with an integrated USB interface in an 80-LQFP package. The MCU can sample sensors, format measurements, and transfer data to a host without a separate USB transceiver. Its 64 KB Flash budget supports compact acquisition firmware and USB descriptors, although interrupt-driven sampling, descriptor storage, and application code must be budgeted carefully. USB impedance-controlled routing and solid grounding are required because signal integrity directly affects enumeration reliability and transfer stability.

🏭

Industrial Control Module

The MKL15Z64VLK4 is suitable for a compact industrial control module that must combine deterministic processing with multiple external interfaces. Its 48 MHz Cortex-M0+ core supports responsive control loops, while the 80-pin LQFP offers more I/O opportunities than smaller MCU packages and can reduce the need for an expander. The 1.8 V to 3.3 V operating range supports low-voltage embedded systems, but industrial designs should verify timing margins, temperature behavior, and peripheral availability before production release.

🔧

USB-to-Serial Adapter

A USB-to-serial adapter can use the MKL15Z64VLK4 to translate USB traffic into a serial interface while adding configuration storage and device control. The integrated USB interface removes the need for a separate transceiver, and the 64 KB Flash capacity is sufficient for a focused firmware image containing a USB stack, serial bridge logic, and configuration commands. Designers should reserve memory for boot code and future descriptors, and should verify the selected UART pins and alternate functions in the manufacturer pin-description table before fixing the board layout.

📱

Portable Sensor Interface

The MKL15Z64VLK4 fits a portable sensor interface where USB provides configuration and data access while the MCU handles local acquisition. Its ultra-low-power positioning is valuable in battery-operated equipment, and operation from 1.8 V to 3.3 V provides flexibility for compact sensor platforms. The 80-LQFP package may be larger than necessary for a minimal wearable, but it offers extensive peripheral access for sensor triggers, status indicators, and digital controls. Power-budget calculations should include both active processing and USB attachment states.

🧩

USB Configuration Interface

The MKL15Z64VLK4 can implement a USB configuration interface for an embedded product that needs field programming, device identification, or runtime parameter updates. USB enumeration permits a host to query the product and update configuration without adding a separate communications processor. The 48 MHz Cortex-M0+ core is more than adequate for a focused configuration task, while 64 KB of Flash must accommodate the firmware image, USB descriptors, and version metadata. A robust firmware-update process should validate image integrity before replacing the active configuration.

📊

Compact Embedded Instrument

The MKL15Z64VLK4 suits a compact embedded instrument that needs local control, USB communication, and enough interface capacity for sensors or actuators. The 48 MHz processor provides real-time execution capability, while the 80-pin package supports a broader external interface than a low-pin-count microcontroller. The 64 KB Flash limit should be checked against instrument firmware, calibration tables, and USB protocol code. Analog measurement accuracy is determined by the external signal chain, so careful reference, grounding, and decoupling design remain necessary around the MCU.

Ringkasan Produk Disebarkan

MKL15Z64VLK4 NXP Semiconductors Dipergunakan di: USB Data-Acquisition Node, Industrial Control Module, USB-to-Serial Adapter, Portable Sensor Interface, USB Configuration Interface, Compact Embedded Instrument MKL16Z64VLH4 same-package NXP family candidate Dipergunakan di: USB Data-Acquisition Node, USB Configuration Interface MKL15Z64VLH4 same-family control MCU candidate Dipergunakan di: Industrial Control Module MKL15Z32VLK4 NXP Semiconductors Dipergunakan di: USB-to-Serial Adapter MKL15Z128VLK4 higher-memory same-package option Dipergunakan di: Portable Sensor Interface MKL14Z32VLK4 NXP Semiconductors Dipergunakan di: Compact Embedded Instrument
What is the NXP MKL15Z64VLK4?
The NXP MKL15Z64VLK4 is an ultra-low-power Kinetis KL1 microcontroller built around a 32-bit ARM Cortex-M0+ processor. It operates at up to 48 MHz, provides 64 KB of Flash memory, includes USB connectivity, and is packaged in an 80-LQFP measuring 12 x 12 mm. The NXP product page identifies these capabilities as being intended for real-time embedded applications.
What are the key specifications of MKL15Z64VLK4 that engineers should know?
The MKL15Z64VLK4 combines a 48 MHz ARM Cortex-M0+ core with 64 KB of Flash memory, USB connectivity, and a 1.8 V to 3.3 V operating range. It is an 80-pin LQFP device measuring 12 x 12 mm, with an industrial temperature grade and an AEC-Q100 listing. These are the principal constraints to evaluate when sizing firmware, routing a PCB, and designing the supply network.
Where can I find the MKL15Z64VLK4 datasheet PDF?
The official product documentation is available through the NXP MKL15Z64VLK4 product page at https://www.nxp.com/part/MKL15Z64VLK4. Use the datasheet and pin-description tables there to confirm package dimensions, terminal assignments, USB routing requirements, and electrical characteristics before committing the PCB layout. The product page is the preferred source because it is maintained by the manufacturer.
Where can I find the MKL15Z64VLK4 pinout?
The MKL15Z64VLK4 pinout is identified as an 80-terminal LQFP with Gull Wing leads in an LFQFP package. Use the pin-description table and package drawing in the NXP manufacturer documentation to assign every signal because alternate functions and power pins must be selected for the specific board configuration. The package drawing also provides the dimensional tolerances required for land-pattern design.
What is the operating voltage of MKL15Z64VLK4?
The MKL15Z64VLK4 operates from 1.8 V to 3.3 V and is cataloged for 1.8 V, 2.5 V, and 3.3 V operating levels. The manufacturer classifies the MCU as ultra-low-power, which makes rail-level design important for battery-operated or USB-powered products. Confirm the voltage-specific current, timing, and USB performance limits in the manufacturer datasheet for the selected rail.
How much Flash memory does MKL15Z64VLK4 have?
The MKL15Z64VLK4 contains 64 KB of Flash memory, represented by the distributor specification 64K x 8. This storage supports embedded firmware, configuration data, USB descriptors, and application routines in a compact control system. Firmware allocation should include stack growth, bootloader functions, and USB class code because the full program-memory capacity must support the complete production image.
Is MKL15Z64VLK4 suitable for USB-connected embedded devices?
Yes, the MKL15Z64VLK4 is suitable for USB-connected embedded devices because NXP specifically identifies USB connectivity among its integrated features. The MCU can support compact USB adapters, data-acquisition nodes, configuration interfaces, and control accessories where a separate USB transceiver would increase board area. USB trace routing, impedance, grounding, and firmware descriptors must still be implemented according to the manufacturer guidance.
What is the best drop-in replacement for MKL15Z64VLK4?
The closest drop-in choices include the same-family NXP KL devices with the same 80-LQFP footprint and approximately equivalent core, clock, and Flash-memory classes. MKL15Z64VLH4 is the most direct same-family option, while MKL16Z64VLH4, MKL14Z32VLK4, MKL15Z32VLK4, and MKL15Z128VLK4 provide distinct memory or family variations. Verify every peripheral, voltage, timing, and qualification requirement before substitution.
Can MKL16Z64VLH4 replace MKL15Z64VLK4?
MKL16Z64VLH4 is a pin-compatible candidate for MKL15Z64VLK4 because both use the 80-LQFP footprint and the catalog comparison identifies them within the Kinetis KL family. However, compatibility of the physical package does not prove functional equivalence. Review clocking, Flash size, USB implementation, peripheral mapping, software support, qualification, and operating-temperature limits before treating it as a production drop-in replacement.
When should I choose MKL15Z64VLK4 over an alternative MCU?
Choose the MKL15Z64VLK4 when the design specifically benefits from its 48 MHz Cortex-M0+ core, 64 KB Flash configuration, integrated USB connectivity, and 80-LQFP interface density. Select an alternative only when a different Flash capacity, family feature set, temperature grade, qualification, or sourcing condition is required. The pin-compatible alternatives preserve PCB reuse but may differ in memory size, clocking, or peripheral details.
What can replace MKL15Z64VLK4?
MKL15Z64VLH4 is the closest same-family replacement because it retains the 64 KB memory class and 80-LQFP format. Other same-footprint candidates include MKL16Z64VLH4, MKL14Z32VLK4, MKL15Z32VLK4, and MKL15Z128VLK4. These options differ in family, clock, or Flash-memory parameters, so engineers should verify USB behavior, peripheral mapping, device drivers, and qualification before changing the BOM.
Is MKL15Z64VLK4 the same as MKL15Z64VLH4?
No, MKL15Z64VLK4 and MKL15Z64VLH4 are related ordering codes rather than identical MPNs. Their suffix differences can encode different temperature or orderable-device characteristics, even though both occupy the same 80-LQFP format and belong to the same 64 KB device family. Treat the exact suffix as a controlled BOM item and compare the ordering information before using either part interchangeably.
What is the best NXP equivalent for MKL15Z64VLK4?
The best NXP equivalent is generally the same-family device with matching package, core frequency, memory density, USB capability, and temperature grade. MKL15Z64VLH4 is the leading candidate because it preserves the 64 KB class and 80-LQFP footprint, while MKL16Z64VLH4 is a viable candidate when its family-specific features meet the design requirements. The final selection requires a pin-by-pin and peripheral-level comparison.
Where can I buy MKL15Z64VLK4 and what is the lead time?
Use the Request a Quote form on this page to ask for MKL15Z64VLK4 availability, MOQ, lead time, and shipment options. A catalog listing reports 6,048 pieces in stock, but that figure is not a commitment and can change without notice. The NXP ordering code is the authoritative identifier to include in the request so the quote matches the exact device and package.
What is the price of MKL15Z64VLK4?
The current commercial terms for MKL15Z64VLK4 should be requested through the Request a Quote form on this page. The quote should specify the exact NXP MPN, the 80-LQFP package, quantity, and any required temperature-grade or automotive-grade documentation. Structured pricing and availability should be evaluated at order time because market conditions and component inventory can change.
Is MKL15Z64VLK4 in stock?
MKL15Z64VLK4 is shown as stocked by one catalog source, with 6,048 pieces reported, but availability is not guaranteed for a specific production quantity. Use the Request a Quote form on this page to confirm current stock, scheduled delivery, and minimum order quantity. Include the target build quantity and any date-code or traceability requirements in the request.

Data referensi kejuruteraan untuk MKL15Z64VLK4 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the MKL15Z64VLK4 when the design needs a 48 MHz ARM Cortex-M0+ MCU with 64 KB of Flash, integrated USB, and an 80-LQFP footprint. It is a strong fit for compact data-acquisition, configuration, sensor-interface, and industrial-control products where moderate firmware capacity and generous pin access are useful. Select MKL15Z64VLH4 when its exact ordering characteristics meet the temperature, clocking, and qualification requirements and the 64 KB memory class is retained. Consider MKL15Z32VLK4 for smaller firmware images, MKL15Z128VLK4 for substantially more program storage, and MKL14Z32VLK4 or MKL16Z64VLH4 when their family-specific feature sets are preferable. A physical footprint match is not enough for production substitution; verify pin multiplexing, USB behavior, clock configuration, peripheral availability, firmware drivers, temperature grade, and qualification before releasing an alternative into the BOM.

Perbandingan dengan Gantian

Parametr Produk Ini MKL15Z64VLH4 MKL16Z64VLH4 MKL14Z32VLK4 MKL15Z32VLK4 MKL15Z128VLK4
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 80-LQFP (12 x 12 mm) 80-LQFP (12 x 12 mm) 80-LQFP (12 x 12 mm) 80-LQFP (12 x 12 mm) 80-LQFP (12 x 12 mm) 80-LQFP (12 x 12 mm)
Flash Memory 64 KB 64 KB 64 KB 32 KB 32 KB 128 KB

Penyeberangsung Jelas

  • Balances 64 KB Flash with 80-pin interface density (vsMKL14Z32VLK4)
  • Provides more program storage than the 32 KB same-package option (vsMKL15Z32VLK4)
  • Uses less Flash than the 128 KB same-package alternative (vsMKL15Z128VLK4)
  • Targets the same 64 KB memory class as the direct suffix alternative (vsMKL15Z64VLH4)

Catatan Desain

Create the PCB land pattern from the NXP 80-LQFP mechanical drawing rather than scaling a generic 80-pin drawing by pin count. Preserve the manufacturer-specified pad dimensions, solder-mask clearance, and exposed thermal arrangement if present. Place decoupling capacitors adjacent to the relevant power terminals and route them through a quiet return path to reduce supply transients during USB transmit and switching activity.

Route USB D+ and D- as a controlled-impedance differential pair with continuous reference-plane support, minimal stubs, and no unnecessary test pads. Keep the connector, protection components, and MCU connection in a compact path. Follow the manufacturer layout guidance for separation from noisy switching nodes and provide a short, low-impedance ground connection around the USB interface.

Do not assume that two devices with the same physical package are automatically interchangeable. Before substituting an alternative, compare the complete pin table, alternate-function muxing, USB peripheral details, clock sources, peripheral availability, memory organization, and device-driver support. The 64 KB Flash limit also requires a firmware size budget that includes USB descriptors, bootloader functions, stack growth, and update metadata.

Design the supply for the selected 1.8 V, 2.5 V, or 3.3 V operating level and verify USB attachment current against the device's applicable electrical limits. Separate noisy return currents from the MCU and USB reference paths, and use local bulk and high-frequency decoupling where required. Power sequencing and brownout behavior must also be reviewed when the MCU shares a rail with sensors or actuators.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The Arrow catalog result identifies the device with AEC-Q100 automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the cited records.

Pencarian Berhubungan

MKL15Z64VLK4 datasheet MKL15Z64VLK4 pinout MKL15Z64VLK4 datasheet pdf MKL15Z64VLK4 specifications NXP MKL15Z64VLK4 MKL15Z64VLK4 48MHz Cortex M0+ MKL15Z64VLK4 64KB Flash MKL15Z64VLK4 80-LQFP MKL15Z64VLK4 equivalent MKL15Z64VLK4 replacement MKL15Z64VLK4 vs MKL16Z64VLH4 MKL15Z64VLK4 USB microcontroller MKL15Z64VLK4 footprint MKL15Z64VLK4 price MKL15Z64VLK4 stock

Komponen dan Tanda berkaitan

NXP Semiconductors MKL15Z64VLK4 MKL15Z64VLH4 MKL16Z64VLH4 MKL14Z32VLK4 MKL15Z32VLK4 MKL15Z128VLK4 ARM Cortex-M0+ Kinetis KL1 microcontroller 32-bit RISC microcontroller embedded processor semiconductor USB Flash memory 80-LQFP LQFP surface mount SMD real-time embedded applications industrial control sensor interface AEC-Q100 48 MHz 64 KB
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ