NXP Semiconductors

MKL17Z64VLH4 - 64KB Flash 48MHz Cortex-M0+ MCU | NXP

N.º de pieza: MKL17Z64VLH4 ✓ Activo
1.71 V to 3.6 V Vdss 64-LQFP Package 48 MHz Speed 64 KB Memory
MOQ: 1 |

MKL17Z64VLH4 Descripción general

NXP Semiconductors MKL17Z64VLH4 is a general-purpose 32-bit Kinetis KL17 ultra-low-power microcontroller with an Arm Cortex-M0+ core, 48 MHz operating frequency, 64 KB of Flash memory, 16 KB of SRAM, USB connectivity, and a 64-LQFP 10 x 10 mm package. It combines a compact general-purpose MCU architecture with embedded memory and low-power operation for embedded control, connectivity, sensing, and portable applications.

A microcontroller is a semiconductor device that integrates a processor core, program memory, volatile data memory, and peripherals into one package. The Kinetis KL1x family extends the low-power Kinetis KL0x family with additional memory, communications, and analog capabilities. The MKL17Z64VLH4 provides 64 KB of Flash for firmware and 16 KB of SRAM for working data, while its Arm Cortex-M0+ core supports efficient 32-bit control processing in a compact embedded footprint.

Principal device features include the 48 MHz Cortex-M0+ core, 64 KB Flash, 16 KB SRAM, USB connectivity, and low-power operation. The 64-LQFP package exposes 64 pins on a 10 x 10 mm body, providing a practical surface-mount option for designs that require more I/O than smaller microcontroller packages. Its general-purpose positioning makes it suitable for control boards, sensor nodes, communication peripherals, and compact industrial equipment.

The MKL17Z64VLH4 belongs to the Kinetis KL17 family, whose architecture is designed around efficient embedded processing rather than high-performance application computing. Its Cortex-M0+ instruction set supports typical interrupt-driven control, peripheral management, and communication tasks. The exact peripheral set, clock configuration, USB operating modes, and electrical limits must be confirmed against the relevant NXP datasheet and reference manual before a new PCB is released.

Typical uses include low-power sensor interfaces, USB-connected peripheral controllers, compact automation equipment, and general-purpose embedded control modules. In each case, the 48 MHz processor provides timing margin for event handling, the Flash capacity accommodates application code, and the SRAM supports working buffers. USB connectivity can also simplify host-device designs that use standard USB controllers, cables, and update mechanisms.

PCB design should preserve the package pin assignments and recommended decoupling layout defined by NXP. Provide a stable local supply, route high-current USB and clock paths carefully, and follow the NXP hardware design guidance for exposed power, ground, and signal connections. Validate oscillator, USB, and low-power behavior across the intended voltage and temperature conditions before production release.

Alternativas directas para MKL17Z64VLH4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MKL17Z64VLH4 (mismo factor de forma y huella) — difiere en Flash Memory, Mounting Type, SRAM, Package, Product Type.

NXP Semiconductors
Flash Memory: 64 KB (64K x 8)
Mounting Type: SMD
SRAM: 8 KB
Comparar con MKL17Z64VLH4 →
NXP Semiconductors
Flash Memory: 32 KB (32K x 8)
Mounting Type: Surface-mount LQFP
SRAM: 8 KB
Comparar con MKL17Z64VLH4 →

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

MKL17Z64VLH4 Valores máximos y características eléctricas

Product Type 32-bit general-purpose ultra-low-power microcontroller
Product Family Kinetis KL17
Processor Core Arm Cortex-M0+
Processor Architecture 32-bit RISC
Maximum CPU Frequency 48 MHz
Flash Memory 64 KB
Program Memory Organization 64K x 8 bits
SRAM 16 KB
Supply Voltage Range 1.71 V to 3.6 V
Supported Internal Supply Settings 1.8 V / 2.5 V / 3.3 V
USB Connectivity Yes
Package Type 64-LQFP
Package Body Dimensions 10 x 10 mm
Recuento de pines 64 pins
Tipo de montaje Surface mount
Estado RoHS Compliant

Guía de configuración de pines de MKL17Z64VLH4 10 x 10 mm

Configuración de pines para MKL17Z64VLH4 (encapsulado 10 x 10 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 10 x 10 mm para MKL17Z64VLH4

No hay datos detallados de patillaje disponibles para MKL17Z64VLH4.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MKL17Z64VLH4 es adecuado para 6 aplicacións: USB Peripheral Controller, Industrial Sensor Interface, Low-Power IoT Node, Compact Automation Controller, Portable Measurement Device, USB-C Enabled Control Module.

🔌

USB Peripheral Controller

The MKL17Z64VLH4 fits USB-connected peripheral controllers because it combines a 48 MHz Arm Cortex-M0+ core with 16 KB of SRAM and USB connectivity. The processor can handle control logic, device-state updates, data buffering, and host-to-device command processing without an external host controller. Its 64 KB of Flash provides space for firmware, USB descriptors, configuration data, and application code. The 64-LQFP package also offers more external connections than compact microcontroller packages, simplifying access to LEDs, buttons, sensors, and status interfaces while remaining suitable for a 10 x 10 mm surface-mount footprint.

🏭

Industrial Sensor Interface

The MKL17Z64VLH4 can serve as the control MCU in a compact industrial sensor interface where low-power operation and local processing are important. Its 48 MHz Cortex-M0+ core is suitable for sampling control, filtering, threshold handling, and communication scheduling, while 16 KB of SRAM accommodates buffers and protocol state. The 1.71 V to 3.6 V supply range supports low-voltage embedded systems, and the 64-LQFP package provides a practical number of I/O connections for digital sensors, status indicators, and local communication. Final peripheral assignments and electrical limits should be verified in the NXP documentation.

🧩

Low-Power IoT Node

The MKL17Z64VLH4 is appropriate for a low-power IoT node that performs local sensing, state management, and USB-assisted configuration. Its Kinetis KL17 family is identified as ultra-low-power, and the 48 MHz Cortex-M0+ core can execute interrupt-driven control tasks without the overhead of a higher-performance processor. The 64 KB Flash and 16 KB SRAM balance firmware capacity and working memory against board area. USB connectivity can support wired commissioning, firmware update, or data export when the node is connected to a host, while the LQFP package remains convenient for inspection and rework.

🤖

Compact Automation Controller

The MKL17Z64VLH4 can act as the central controller in a compact automation module that coordinates sensors, indicators, and communications. Its 48 MHz processing rate supports responsive control tasks, and the 64 KB Flash provides more room for application logic and communication handlers than a 32 KB Flash member of the family. With 16 KB of SRAM and 64 exposed package pins, the device is well suited to medium-complexity control boards that need both memory and moderate I/O capacity. The 1.71 V to 3.6 V operating range should be reconciled with the power architecture, regulators, analog sections, and communication interfaces on the completed board.

📱

Portable Measurement Device

The MKL17Z64VLH4 fits portable measurement equipment that combines local control with USB connectivity for data transfer or configuration. The Cortex-M0+ core can manage measurement sequencing, control registers, and communication tasks, while 16 KB of SRAM provides space for working buffers. Its low-voltage, ultra-low-power family positioning is useful in compact instruments where energy use and component count matter. USB connectivity can reduce the need for a separate communications controller in appropriately designed products. The device's analog capabilities and maximum clock configuration must be confirmed from the NXP documentation before selecting it for precision signal acquisition.

💻

USB-C Enabled Control Module

The MKL17Z64VLH4 can be used in a USB-C-oriented control module when the board requires a compact MCU with native USB connectivity and moderate processing capacity. The 48 MHz Cortex-M0+ processor supports USB stack activity, configuration handling, and application logic, and the 64 KB Flash accommodates a meaningful firmware image for a general-purpose embedded product. The 64-LQFP package offers a straightforward 10 x 10 mm assembly option with ample I/O access for power controls, status LEDs, and external interfaces. USB-C connector orientation, data-role requirements, CC logic, protection devices, and power-delivery requirements must be designed separately from the MCU.

What is the MKL17Z64VLH4?
The MKL17Z64VLH4 is a 32-bit Kinetis KL17 general-purpose microcontroller with an Arm Cortex-M0+ core, 48 MHz maximum operating frequency, 64 KB of Flash memory, 16 KB of SRAM, and USB connectivity. According to the NXP product page, it is positioned as an ultra-low-power MCU for embedded control and communications. The device is supplied in a 64-LQFP package measuring 10 x 10 mm.
What are the key specifications of MKL17Z64VLH4 that engineers should know?
The MKL17Z64VLH4 combines a 48 MHz Arm Cortex-M0+ core with 64 KB of Flash, 16 KB of SRAM, USB connectivity, and a 1.71 V to 3.6 V operating supply range. The NXP product information identifies the device as a 32-bit Kinetis KL17 ultra-low-power microcontroller. Its 64-LQFP package contains 64 pins and has a 10 x 10 mm body, making its memory and core resources suitable for compact embedded-control designs.
Where can I download the MKL17Z64VLH4 datasheet PDF?
The official MKL17Z64VLH4 datasheet and supporting documentation are available through the NXP product page at https://www.nxp.com/part/MKL17Z64VLH4. Select the device's Data Sheet, Reference Manual, and errata resources for a production design. Third-party document pages can help locate archived copies, but the NXP product page should be used as the primary source for revision status and device details.
Where can I find the MKL17Z64VLH4 pinout?
The MKL17Z64VLH4 pinout is defined for its 64-LQFP package and should be taken from the pin-description table in the NXP Kinetis KL17 documentation. The package has 64 pins on a 10 x 10 mm body. Use the official pin table to assign power, ground, reset, clock, USB, and GPIO functions before routing the PCB; do not infer missing pin functions from a generic package drawing.
What power supply range does the MKL17Z64VLH4 require?
The MKL17Z64VLH4 operates across a 1.71 V to 3.6 V supply range, with internal operating configurations identified for 1.8 V, 2.5 V, and 3.3 V. The LCSC product entry and NXP family documentation identify this low-voltage range. Confirm the exact internal regulator, external component, and brownout configuration for the selected operating mode in the manufacturer data sheet before layout release.
Is the MKL17Z64VLH4 suitable for USB-connected embedded devices?
Yes, the MKL17Z64VLH4 is suitable for USB-connected embedded devices because the NXP product information identifies USB connectivity. Its 48 MHz Cortex-M0+ core and 16 KB of SRAM provide resources for peripheral control, protocol handling, and low-power operation. USB bus-routing, impedance, power, and firmware requirements must follow the relevant NXP hardware guidance and applicable USB interface specification.
What can replace the MKL17Z64VLH4?
A verified drop-in replacement for the MKL17Z64VLH4 was not established by the available manufacturer and cross-reference records. A suitable replacement must retain the 64-LQFP footprint, 64 KB Flash, 16 KB SRAM, 48 MHz Cortex-M0+ core, USB capability, voltage range, and exact pin functions. The NXP cross-reference service or a device-specific parametric search should be used to validate any proposed substitute before PCB reuse.
Is MKL17Z32VLH4 a drop-in replacement for MKL17Z64VLH4?
The MKL17Z32VLH4 is a related Kinetis KL17 device, but it should not be treated as a confirmed drop-in replacement for the MKL17Z64VLH4 without detailed validation. Its model designation indicates 32 KB rather than 64 KB of Flash, so firmware storage is reduced by 32 KB, or 50%. This memory difference must be assessed against the application, along with pin functions, USB features, clocking, and qualification requirements.
When should I choose MKL17Z64VLH4 instead of a lower-memory Kinetis KL17 device?
Choose the MKL17Z64VLH4 when firmware and application data require the full 64 KB of Flash while the design can use the 64-LQFP footprint and 48 MHz Cortex-M0+ core. A 32 KB Flash alternative reduces program-storage capacity by 32 KB, which may prevent the use of larger protocol stacks, logging, or application features. Choose the larger device only after checking that its pin assignments and peripheral configuration match the existing board.
Where can I buy MKL17Z64VLH4 online?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and lead time for the MKL17Z64VLH4. The exact orderable MPN should be stated in the request to avoid confusion with the tape-and-reel ordering code MKL17Z64VLH4R. Confirm the package form and delivery requirements before placing an order.
What is the price of MKL17Z64VLH4?
The current commercial price for the MKL17Z64VLH4 is handled through the Request a Quote form on this page. Submit the exact MPN, required quantity, and preferred package form for a current quotation. Because electronic-component pricing can change with inventory, quantity, and market conditions, use the form for an actionable price rather than relying on a static historical listing.
What is the lead time and stock status for MKL17Z64VLH4?
Request the current MKL17Z64VLH4 stock status and lead time through the Request a Quote form on this page. Include the required quantity, package form, target delivery date, and any qualification needs. The manufacturer product page identifies the device, while live procurement conditions should be confirmed separately before committing the component to a production schedule.
Is MKL17Z64VLH4 in stock?
Stock for the MKL17Z64VLH4 should be confirmed through the Request a Quote form on this page. Include the quantity required and whether the LQFP-64 tray form or the MKL17Z64VLH4R ordering form is acceptable. A stock confirmation should be based on the exact orderable MPN because packaging variants can have different inventory positions and production schedules.
How does MKL17Z64VLH4 compare with MKL17Z32VLH4?
The MKL17Z64VLH4 provides 64 KB of Flash, while the MKL17Z32VLH4 provides 32 KB, giving the former twice the program memory. Both are identified as NXP Kinetis KL17 Arm Cortex-M0+ microcontroller variants, but a board replacement also requires confirmation of package pins, SRAM, USB functions, clocking, and operating limits. The Flash difference alone is 32 KB, or 50%, so firmware compatibility must be checked.
Is the MKL17Z64VLH4 RoHS compliant?
The MKL17Z64VLH4 is identified as RoHS compliant in its product listing information. RoHS compliance concerns restricted substances in the component and is distinct from AEC-Q100 automotive qualification or REACH declarations. For a regulated design, obtain the latest manufacturer declarations and supporting material for the exact orderable part, including any packaging or regional requirements.

Datos de referencia de ingeniería para MKL17Z64VLH4 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the MKL17Z64VLH4 when a design needs 64 KB of Flash, 16 KB of SRAM, a 48 MHz Arm Cortex-M0+ core, USB connectivity, and a 64-LQFP footprint. It is particularly suitable for low-power sensor interfaces, USB peripherals, compact automation modules, and portable measurement devices. The related MKL17Z32VLH4 may be attractive when 32 KB of Flash is sufficient, but its lower program-memory capacity can constrain firmware growth. Do not treat the 32 KB variant as a confirmed drop-in replacement without checking every pin and peripheral function. A third-party MCU with a similar package may use different USB routing, clock pins, analog functions, or programming interfaces. For an existing PCB, use the NXP cross-reference process and compare the complete pin, clock, memory, USB, voltage, temperature, and lifecycle requirements before approving a substitution.

Comparación con alternativas

Parámetro Este producto
Brand NXP Semiconductors
Package 64-LQFP (10 x 10 mm)
Processor Core Arm Cortex-M0+
Maximum CPU Frequency 48 MHz
Flash Memory 64 KB
SRAM 16 KB
Supply Voltage Range 1.71 V to 3.6 V
USB Connectivity Yes
Product Family Kinetis KL17
RoHS Status Compliant

Diferenciadores clave

  • Twice the Flash capacity of the related 32 KB KL17 option (frente a MKL17Z32VLH4)
  • 48 MHz processing capability (frente a MKL17Z32VLH4)
  • USB connectivity integrated into a compact general-purpose MCU (frente a MKL17Z32VLH4)

Notas de diseño

Route the MKL17Z64VLH4 power and decoupling connections directly from the 64-LQFP footprint according to the NXP hardware design guidance. Place required input, output, and bypass capacitors next to their associated pins, with the shortest possible return path to the ground system. Keep USB data and clock routes away from switching nodes and high-current LED paths, and use the manufacturer's recommended layer stack and controlled-impedance geometry for USB interfaces.

Design the supply around the device's documented 1.71 V to 3.6 V operating range rather than assuming every 3.3 V peripheral can share the same rail. Verify internal-regulator modes, external component values, brownout behavior, and startup sequencing in the NXP data sheet. Keep analog and USB-related supply paths clean, and use the 64 KB Flash and 16 KB SRAM constraints to estimate firmware, bootloader, and working-buffer requirements before finalizing the system partition.

Preserve the exact MKL17Z64VLH4 pin functions in the 64-LQFP symbol and footprint, including reset, clock, debug, USB, power, and ground assignments. Review the exposed pad and thermal or copper requirements associated with the selected package variant. For low-power operation, isolate unused pins according to the manufacturer's guidance and avoid floating inputs. Validate the final assembly against the package drawing because mechanical dimensions and lead geometry are part of the pin-compatibility decision.

Información de cumplimiento

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

RoHS compliance is identified by the component listing. No specific REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was confirmed for the exact MPN.

Datos verificados el: 2026-11-19 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MKL17Z64VLH4 datasheet MKL17Z64VLH4 pinout MKL17Z64VLH4 datasheet pdf MKL17Z64VLH4 specifications MKL17Z64VLH4 equivalent MKL17Z64VLH4 replacement MKL17Z64VLH4 cross reference MKL17Z64VLH4 vs MKL17Z32VLH4 MKL17Z64VLH4 LQFP-64 footprint MKL17Z64VLH4 price MKL17Z64VLH4 stock NXP MKL17Z64VLH4

Componentes & términos relacionados

NXP Semiconductors MKL17Z64VLH4 MKL17Z32VLH4 MKL16Z64VFT4 Kinetis KL17 Kinetis KL1x Arm Cortex-M0+ 32-bit RISC microcontroller general-purpose microcontroller embedded processor semiconductor 64 KB Flash memory 16 KB SRAM 48 MHz USB connectivity 1.71 V to 3.6 V supply 64-LQFP package LQFP package family surface-mount technology embedded control sensor interface USB peripheral ultra-low-power MCU RoHS 10 x 10 mm package
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ